AsteraApp
Free
12.10for iPhone, iPad and more
4.9
37 Ratings
Astera LED Technology GmbH
Developer
110.5 MB
Size
Dec 4, 2023
Update Date
Entertainment
Category
4+
Age Rating
Age Rating
AsteraApp Screenshots
About AsteraApp
The AsteraApp™ offers intuitive and fast control of complex lighting setups with fully customizable programs and effects. The App is also used to prepare Astera lights for wireless DMX by sending addresses and profilesto them. In addition, lamps can be diagnosed, updated or reset from the AsteraApp™.
Here are some of the features:
Talkback+
Detect all available lights, set them up, check their status, configure DMX addresses and DMX profiles.
Seamless Runtime
Set the length of your production and be sure that your lights won`t run out while still getting the maximum brightness.
Effects
Quickly build programs out of colors and effects, trigger them or make them match a beat.
Targets
Quickly create groups of lights, assign positions and select which lights should receive commands.
Scheduled StandBy
Switch lights into power-saving standby and schedule them to wake up when the production starts.
Dynamic PowerBoost
This exclusive feature makes the light able to display the maximum brightness at all time and intensify non-white colors.
Green/Magenta Correction
Adjust green/magenta during content creation to reduce postproduction work.
Emergency Lights
Switches to white light when AC power is cut to keep your event save
DJ Feature
Auto BPM analyzes the beat and matches programs to it, flash buttons can trigger special effects while being held down.
Other Features
The AsteraApp™ is packed with many additional items and new features are frequently added via software update.
Here are some of the features:
Talkback+
Detect all available lights, set them up, check their status, configure DMX addresses and DMX profiles.
Seamless Runtime
Set the length of your production and be sure that your lights won`t run out while still getting the maximum brightness.
Effects
Quickly build programs out of colors and effects, trigger them or make them match a beat.
Targets
Quickly create groups of lights, assign positions and select which lights should receive commands.
Scheduled StandBy
Switch lights into power-saving standby and schedule them to wake up when the production starts.
Dynamic PowerBoost
This exclusive feature makes the light able to display the maximum brightness at all time and intensify non-white colors.
Green/Magenta Correction
Adjust green/magenta during content creation to reduce postproduction work.
Emergency Lights
Switches to white light when AC power is cut to keep your event save
DJ Feature
Auto BPM analyzes the beat and matches programs to it, flash buttons can trigger special effects while being held down.
Other Features
The AsteraApp™ is packed with many additional items and new features are frequently added via software update.
Show More
What's New in the Latest Version 12.10
Last updated on Dec 4, 2023
Old Versions
Fixes: ART7WIFI may not be recognised by the app after restarting the phone.
Show More
Version History
12.10
Dec 4, 2023
Fixes: ART7WIFI may not be recognised by the app after restarting the phone.
12.08
Apr 3, 2023
Fixed: Arrangement ot target tiles.
Fixed: Brightness sliders responding behaviour.
Fixed: Brightness sliders responding behaviour.
12.07
Mar 28, 2023
Fixed: Whole lines could be highlighted in the Connected Lights list.
Fixed: After changing the radio PIN, incorrect lamps could temporarily be displayed in the Connected Lights List.
Fixed: In the background update page, updates to versions that already have all connected lamps of a type can no longer be selected.
Modified: french support partner in About Page.
Added: Duplicate Radio PIN detection and treatment (requires fw v5.12.67 or higher for BTB).
Added: Magic Wand->Sequential Addressing: overflow check.
Added: CRMX Link by key option (requires fw v5.12.90 or higher).
Added: Connected lights can now be automatically reconfigured to the new PIN when the radio PIN is changed (requires fw v5.12.67 or higher).
Fixed: DMX-Configurator: overflow calculation intervened one address too early.
Added: 90 degree feature for layered effects (only has effect in HYDRAs with v5.12.96 or higher).
Modified: The color of the Label of a BT Bridge has changed from black to white.
Modified: Legacy Bluetooth mode has been removed in Background Update Page..
Added: Progress display in Firmwares download.
Added: Faster connected lights list (requires fw v5.12.88 or higher for BTB).
Added: Progress display in the magic wand.
Fixed: If a long Fixture Number (set via app) was edited on the lamp, it could be displayed incorrectly on the app.
Added: fully Support for the CRMX Module of the ART7.
Fixed: Standby times could be displayed one hour too early after they were read out from a newly connected ART7.
Added: Disable random flashing switch to DMX Configurator.
Added: Support for HyperionBTB.
Fixed: After changing the radio PIN, incorrect lamps could temporarily be displayed in the Connected Lights List.
Fixed: In the background update page, updates to versions that already have all connected lamps of a type can no longer be selected.
Modified: french support partner in About Page.
Added: Duplicate Radio PIN detection and treatment (requires fw v5.12.67 or higher for BTB).
Added: Magic Wand->Sequential Addressing: overflow check.
Added: CRMX Link by key option (requires fw v5.12.90 or higher).
Added: Connected lights can now be automatically reconfigured to the new PIN when the radio PIN is changed (requires fw v5.12.67 or higher).
Fixed: DMX-Configurator: overflow calculation intervened one address too early.
Added: 90 degree feature for layered effects (only has effect in HYDRAs with v5.12.96 or higher).
Modified: The color of the Label of a BT Bridge has changed from black to white.
Modified: Legacy Bluetooth mode has been removed in Background Update Page..
Added: Progress display in Firmwares download.
Added: Faster connected lights list (requires fw v5.12.88 or higher for BTB).
Added: Progress display in the magic wand.
Fixed: If a long Fixture Number (set via app) was edited on the lamp, it could be displayed incorrectly on the app.
Added: fully Support for the CRMX Module of the ART7.
Fixed: Standby times could be displayed one hour too early after they were read out from a newly connected ART7.
Added: Disable random flashing switch to DMX Configurator.
Added: Support for HyperionBTB.
11.58
Apr 28, 2022
Added: Fast update of Bluetooth Bridges.
11.57
Feb 7, 2022
Modified: DMX Configurator: "Profile by #" cannot be changed while sending is active.
Fixed: DMX Configurator: Fixture Number now increments by 1 (and not by current DMX footprint).
Fixed: DMX Configurator: After editing Fixture Number while Sending is active, the new one is sent out.
Fixed: DMX Configurator: Fixture Number now increments by 1 (and not by current DMX footprint).
Fixed: DMX Configurator: After editing Fixture Number while Sending is active, the new one is sent out.
11.56
Feb 2, 2022
Modified: Any string can now be entered as the fixture number in the light's details.
Modified: Lower limit for entering fixture numbers is 1 now.
Fixed: Master PINs can be entered with 8 digits anywhere in the app.
Fixed: The entry of the strobe mode was possibly hidden in the DMX configurator for tubes.
Modified: Lower limit for entering fixture numbers is 1 now.
Fixed: Master PINs can be entered with 8 digits anywhere in the app.
Fixed: The entry of the strobe mode was possibly hidden in the DMX configurator for tubes.
11.55
Dec 17, 2021
Fixed: Bluetooth connection does not work sometimes.
Added: Lights onboarding.
Added: Lights onboarding.
11.54
Nov 28, 2021
Downgrade to version 11.50 (only version number is changed to 11.54)
11.53
Nov 25, 2021
Fixed: Bluetooth connection does not work sometimes
11.52
Nov 24, 2021
Fixed: Bluetooth connection does not work sometimes.
11.51
Nov 19, 2021
Added: Management of multiple Bluetooth Bridges at same time
Modified: temporary light names feature
Added: Assignment of temporary lamp names in the DMX configurator
Fixed: turn by 180 feature removed for spots
Modified: temporary light names feature
Added: Assignment of temporary lamp names in the DMX configurator
Fixed: turn by 180 feature removed for spots
11.50
Sep 21, 2021
Added: support for turn by 180 feature (requires firmware V5.10.22) .
Added: support for temporary light names (requires firmware V5.10.22).
Added: Macro rename of light.
Added: downloading lights log files (requires firmware V5.11.0).
Added: support for temporary light names (requires firmware V5.10.22).
Added: Macro rename of light.
Added: downloading lights log files (requires firmware V5.11.0).
11.49
Sep 1, 2021
Fixed: app crashed after connecting to AsteraBox or NYX Bulb
11.48
Aug 25, 2021
Fixed: app does not save last connected AsteraBox
11.47
Aug 25, 2021
- Fixed: Backups that were created with an app version V11.44 or earlier could not be loaded with V11.45 and V11.46.
- Fixed: lights details/magic wand: Values selected from the pickers were not always adopted.
- Fixed: lights details/magic wand: Values selected from the pickers were not always adopted.
11.46
Jul 25, 2021
Fixed: In the DMX Configurator the DMX Address jumped to a different value after the end of the transmission process.
11.45
Jul 12, 2021
Added: Names for Launcher Pages
Fixed: tapping Tap Sync Tile did release a latched Flash Tile
Fixed: tapping Tap Sync Tile did release a latched Flash Tile
11.44
Jun 16, 2021
Added: support for new PB15
11.43
Jun 11, 2021
Added: Display of the RGB values after tapping between "Black" button and the color wheel.
11.42
May 18, 2021
Added: bluetooth support for NYX bulb.
Added: Small tiles mode for program launcher.
Added: Small tiles mode for program launcher.
11.41
May 7, 2021
Added: When starting an "Update to latest", the app offers to exclude lamps with higher version.
Added: Confirmation window before starting a possible downgrade to a lower firmware version.
Fixed: rosco E703 was not Cold Lavender.
Added: "DMX Values for common Colors V3" with more Whites and Hue/Sat values for all gels.
Added: Confirmation window before starting a possible downgrade to a lower firmware version.
Fixed: rosco E703 was not Cold Lavender.
Added: "DMX Values for common Colors V3" with more Whites and Hue/Sat values for all gels.
11.40
Apr 6, 2021
Fixed: app crashes sometimes when establishing a bluetooth connection.
11.39
Mar 12, 2021
Changed: App does not try to update nyx that are connected via bluetooth.
11.38
Feb 7, 2021
Added: Connection to the Internet is no longer required to start controlling Nyx Bulbs without an AsteraBox.
Fixed: When restoring a Backup, the arrangement on the target's page was lost and all tiles were bunched together.
Fixed: English version of Standby Time editor could not handle values in range 12:00 AM to 12:59 AM.
Fixed: When the app is connected to a NYX Bulb via Bluetooth, "Disable AUTO BPM" was not forcibly On.
Fixed: "AC Fail" modes were selectable for NYx Bulbs in light's details.
Changed: In the Magic Wand, the "Unpair CRMX" is already there when one of the selected lamps is paired.
Changed: In the Magic Wand, the power on button is only there when all the selected lamps are "POWERED OFF".
Fixed: When restoring a Backup, the arrangement on the target's page was lost and all tiles were bunched together.
Fixed: English version of Standby Time editor could not handle values in range 12:00 AM to 12:59 AM.
Fixed: When the app is connected to a NYX Bulb via Bluetooth, "Disable AUTO BPM" was not forcibly On.
Fixed: "AC Fail" modes were selectable for NYx Bulbs in light's details.
Changed: In the Magic Wand, the "Unpair CRMX" is already there when one of the selected lamps is paired.
Changed: In the Magic Wand, the power on button is only there when all the selected lamps are "POWERED OFF".
11.37
Dec 18, 2020
- fixed: If an effect was opened in the Targets tab, the commands could be sent to the wrong lamps.
- fixed: minor issue with Enter / Leave Standby time editor.
- fixed: minor issue with Enter / Leave Standby time editor.
AsteraApp FAQ
Click here to learn how to download AsteraApp in restricted country or region.
Check the following list to see the minimum requirements of AsteraApp.
iPhone
Requires iOS 10.3 or later.
iPad
Requires iPadOS 10.3 or later.
iPod touch
Requires iOS 10.3 or later.
