Audio Evolution Mobile Studio

* Solved a crash that could occur when loading a project and the option to display the master channel in the track mixer was enabled.
* Added a MIDI 'Panic' button to Live Performance mode.
* Added a new parameter 'Leslie mode 2' to Evolution B3 where the first third is off, then slow, then fast which is easier to use with an expression pedal.
* The Mute button could not be toggled for master/group channel in Live Performance mode. Solved.

* Solved a crash when trying to delete a file in the File Browser when the file had non-standard characters.
* Solved a crash when importing a file by drag&drop under certain conditions.
* Changing live performance mode state will now only take place after a restart.

* When not using the device's native sample rate, playback and recording could stop with a failure message. Solved.
* When leaving the Settings dialog, some settings like 'Reverse sustain pedal' did not come into effect directly. Solved.
* Solved an issue where 'Reverse sustain pedal' did not work correctly with multiple tracks armed.
* Solved a crash in live performance mode when adding a track when a track was armed.
* If AudioBus was active, tracks were un-armed when starting to record. Solved.
* In Live Performance mode, the user interface of AUv3 instruments was not displayed for iPhones. Solved.
* The beta option to change Storage Location would cause a crash since the addition of the Live performance mode option. Solved.

* When leaving the Settings dialog, some settings like 'Reverse sustain pedal' did not come into effect directly. Solved.
* Solved an issue where 'Reverse sustain pedal' did not work correctly with multiple tracks armed.
* Solved a crash in live performance mode when adding a track when a track was armed.
* If AudioBus was active, tracks were un-armed when starting to record. Solved.
* In Live Performance mode, the user interface of AUv3 instruments was not displayed for iPhones. Solved.
* The beta option to change Storage Location would cause a crash since the addition of the Live performance mode option. Solved.

* The volume peak calculation for the right channel of a stereo track was wrong in situations where a zero-crossing needed to be calculated. Solved.
* 'Add track' in Live Performance mode could cause a crash when 16 or more tracks were present. Solved.
* Saving a project in Live Performance would un-arm the tracks and the arm state was therefore not stored. Solved.
* Selecting MIDI remote setup would un-arm the tracks. Solved.
* Improved memory management when switching Soundfonts.
* Added Portamento on/off and Portamento time parameters to ADSR displays of the virtual keyboard and Live mode.
* Added a 'MIDI remote control' option to the menu of the EQ section in the mixer channel.
* Added a 'MIDI remote control' option to the menu of the ADSR controls in the virtual keyboard. The MIDI remote control setup dialog has this functionality, but applies to all armed tracks.
* The app is now able to display in full screen on a Mac.

* The volume peak calculation for the right channel of a stereo track was wrong in situations where a zero-crossing needed to be calculated. Solved.
* 'Add track' in Live Performance mode could cause a crash when 16 or more tracks were present. Solved.
* Saving a project in Live Performance would un-arm the tracks and the arm state was therefore not stored. Solved.
* Selecting MIDI remote setup would un-arm the tracks. Solved.
* Improved memory management when switching Soundfonts.
* Added Portamento on/off and Portamento time parameters to ADSR displays of the virtual keyboard and Live mode.
* Added a 'MIDI remote control' option to the menu of the EQ section in the mixer channel.
* Added a 'MIDI remote control' option to the menu of the ADSR controls in the virtual keyboard. The MIDI remote control setup dialog has this functionality, but applies to all armed tracks.
* The app is now able to display in full screen on a Mac.

* This update adds Evolution B3, a new tonewheel organ emulation instrument, and a Rotary Speaker effect. Both are included in one single in-app purchase and cannot be bought separately.
Evolution B3 highlights:
* models 91 tonewheel oscillators, key click, leakage, percussion, scanner vibrato/chorus etc.
* separate upper, lower and pedal manuals with independent MIDI channels
* full MIDI remote control of every parameter including the drawbars
Rotary Speaker highlights:
* models rotating horn, doppler effect, cabinet, mic etc.
* adjustable slow/fast horn speed, crossover, mic distance and cabinet reflections
* Unlock the complete sample loop collection in one low price purchase of 4.49 euro ex VAT. This bundle includes all 18 sample loop packs (869MB!), with a wide range of professionally produced loops from Function Loops. Loop packs cannot be purchased separately anymore.
* BETA: Added a 'Live performance' mode targeted at people who use the app primarily for playing virtual instruments on stage.
The feature can be activated in the BETA settings (Live Performance mode (BETA)).
In 'Live performance' mode, the app creates 16 instrument tracks (or what you set as 'Initial number of tracks' in the 'Live performance' settings), mixer channels are optimized for arming tracks and switching instruments, and there is a 'FX stack' option to display the most common effects at once for quick access.
* Besides this, projects/songs can be added to set lists to quickly jump between songs, including by MIDI CC.
* Note that this is a BETA feature, please contact us by e-mail when you find issues or have suggestions for improvement.
* Improved mixer scrolling: now smooth instead of stepped.
* Added a non-realtime Denoise option to the 'Apply effects' menu item in the audio clip pop-up menu.
* Added an option 'Display master channel in track mixer' to the Mixer settings.
* Added a 'MIDI learn' button to the key range option in the MIDI input dialog.
* Added '-12' and '+12' buttons to the Transpose option in the MIDI input dialog.
* Added a 'Tube Drive' plug-in.
* Unfreezing a track while playing could cause a crash. Solved.
* When pasting a MIDI clip to a different track, the MIDI channel of the note on's were changed accordingly, but not the note off's which could lead to hanging notes. Solved.
* Added a Spanish translation.
* Solved a memory leak when loading projects where Soundfonts remained in memory.

'Import' in the multi-instrument drum pattern sound selection dialog did not work when choosing the option 'Directory'. Solved.

* In the MIDI remote setup dialog, when using MIDI learn, the textbox did not get updated directly with the MIDI CC value. Solved.
* 'All MIDI channels' setting did not work in MIDI remote setup. Solved.
* 'Arm by MIDI PC' in the MIDI remote control editor did not work anymore. Solved.
* 'Import' in the multi-instrument drum pattern sound selection dialog did not always work. Solved.

* Solved a possible crash when duplicating a track.
* Track names are now stored when exporting to a MIDI file.
* Solved an issue with ADSR changes not being applied.

* Added a 'Project storage folder' option to the BETA settings where you can change the storage folder for projects to a USB drive for example.
* Added an option 'Input velocity' to the MIDI input dialog which opens a dialog where you can set the input velocity curve. This can be stored either per MIDI device or per track. The 'Output velocity range' option has been removed and if it was set, it is now mapped to the input velocity curve.
* Many changes to MIDI remote setup:
- Added Latched/unlatched and MIDI channel columns to support a wider variety of MIDI controllers with different button behaviors.
- Because of that, 'Play triggers at 127 only' and 'Arm toggles' have been removed since they can be controlled by turning Latched on or off.
- 'First available input' is now changed to 'All'.
* When loading a project with two similar USB MIDI keyboards attached, the app should now assign the correct input to the tracks, given the project was saved with this version.
* Solved an issue with AUv3's not recording MIDI channel pressure, like the GeoShred Tenor Sax.
* Ported the 'Load Project' and 'Instrument selection' dialogs to JUCE.
* Solved issues with default note velocity in the drum pattern editor.
* Mix-down to M4A format with a sample rate of 48000Hz was not possible anymore. Solved.
* Solved bugs in and improved the Compressor.

* Added an option 'By BPM' to the time stretch dialog where you can enter a source and target BPM.
* Added an option 'Ignore MIDI volume (CC 07)' to the MIDI input dialog.
* Added an option 'Ignore pitch bend' to the MIDI input dialog. This can help with faulty MIDI keyboards that erroneously send pitch bend messages.
* Added an option 'Solo exclusive mode' to the Mixer channel settings.
* Solved a possible crash when loading a project with AudioBus active.
* The setting 'Ignore other MIDI CC's was not saved. Solved.
* The time stretch button in the piano roll editor did not work anymore. Solved.
* Available memory display in the instrument selection dialog now gets updated every second which is more reliable since Soundfonts are loaded in the background.
* Wheels on/off state in the virtual keyboard is now remembered.

* Long-pressing a Soundfont in the instrument selection dialog now opens a menu where you can choose to delete the Soundfont.
* Added a search field to the automation parameter selection and MIDI CC selection dialogs.
* Calculation of the pre-computed graphics file for audio clips now happens in the background. For long audio clips, this could mean that the waveform is not displayed directly after importing or recording and that 'Loading...' is displayed in the clip.
* Loading a project name with international characters didn't work. Solved.
* Values are now displayed underneath the graphic EQ sliders for iPads.

* Note offs are now sent to an AU MIDI after stopping playback. Before, starting playback could still have a hanging note that was processed.
* Added 'Render to a MIDI file' to the track pop-up of instrument and MIDI tracks so you can save individual tracks to a MIDI file.
* Solved a possible crash that could occur when disconnecting or connecting a USB audio device.
* Audio tracks are now unarmed when attaching/detaching an audio device.

* Added search fields to the instrument selection and effect selection dialogs.
* Parameters with automation points are now displayed on top in the parameter selection menu.
* Added an option 'Show MIDI channel button in piano roll' to the MIDI settings. This can be helpful with Audio Units like the (upcoming) Battallion drum machine.
* The FX Send block now displays the target bus name as subscript.
* Opening the MIDI remote control for effect parameters twice could result in the MIDI learn not working anymore. Solved.
* When swapping effects with a side chain, the side chain wasn't swapped as well. Solved.
* A connection from the IN block to the second row was not set when loading a FX grid. Solved.
* User-defined drum kits were not displayed in the multi-instrument selection section. Solved.

* Added an option 'Track selection' to the 'Export to other DAW' dialog.
* Solved an issue where MIDI notes could be drawn outside of the clip.
* Selecting a subdirectory in the instrument selection dialog could cause a crash. Solved.
* Solved a crash after arming a pure MIDI track when the input was set to 'Virtual keyboard'.
* Scan for BT MIDI devices didn't work anymore. Solved.
* Solved a freeze when loading a project with a freezed track with more than 2 Fx Sends.

* Added a 'Trim end' option to the 'Auto split' dialog.
* Added a Mute/Unmute option to the clip pop-up menu (except for clips on pure MIDI tracks).
* 'Auto split' was not calculated correctly for stereo clips. Solved.
* Clip volume and fades did not work for a multi-drum pattern track. Solved.
* Markers could be placed incorrectly when tempo changes were present. Solved.

* Many actions can now be done during playback, most of them without a pause, some with a short pause.
* Changed the colors of the piano roll and drum pattern editor into a dark mode.
* Added a 'Multi-instrument' option when creating a drum pattern track: in this mode, you can assign an audio file or a sound from a Soundfont to a drum 'lane'. This makes it possible to use your own sounds in the drum pattern editor. Each drum lane now also features its own audio processing chain, meaning that it has its own effects grid, volume, panning, ADSR, pitch shift and basic reverb controls. You can use the iOS drap & drop mechanism to import drum sounds as well (max. file size 4MB).
* A free drum sound pack consisting of 80 high quality drum samples for use with the multi-instrument drum pattern editor can be downloaded. It features a wide range of kicks, snares, hihats, toms, etc. sorted by different genres: 80's Retrowave, Acoustic, EDM, Foley, Hip Hop, Industrial and Reggaeton.
* Optional in-app purchase to extend the free drum sound pack with 420 more high quality drum samples.
* Added multi-output support for AUv3 instruments. Additional outputs can be sent to mix busses.
* New Settings screen to match the app's style.
* Multiple mixer controls can now be adjusted simultaneously.
* Added an 'Import Soundfont' option to the instrument selection dialog (although Soundfonts can always be copied directly using the Files app to the AudioEvolution/SoundFonts folder).
* Added a 'Share' option to the file pop-up menu in the file browser.
* Added an option 'Draw grid on top of clips' which now defaults to 'off'.
* Changes to tempo markers can now be undo/redone.
* The audio input dialog now makes it possible to select between different inputs of the device itself, so you can for example select the iPad microphone even if a headset is connected.
* The state of the AU button in the instrument display is now remembered and stored with the project.
* When editing notes outside the current clip area, the clip will now be automatically expanded.
* Added a Quantize option to the pop-up menu of selected notes in the piano roll editor.
* Added a 'Select all' button to the piano roll editor in Edit mode.
* The mixer can now be scrolled when dragging in the volume slider area.
* The available memory is now displayed in the instrument selection dialog. The app will now refuse to load Soundfonts when the available memory is lower than 250MB to prevent out-of-memory crashes.
* Added an 'Auto split' option to the audio clip pop-up menu.
* Added an option 'MIDI loop recording'.
* Added an option to test the new plug-in delay compensation that works for both audio and instrument tracks (non-armed) to the BETA section of the new settings dialog.
* The size of the AU MIDI view is now remembered and stored in the project (half/full size) and the option 'Open AU in full screen' has been removed from the Settings.
* Portuguese translation
* Solved a crash that could occur when MIDI was received while adding or removing a track.
* Replacing an effect with the display active of the target effect block could cause a crash. Solved.
* A split point could be erroneously added when moving your finger beyond the display edge. Solved.
* Long-tapping a position on the arranger screen and selecting Paste could paste at the wrong location. Solved.
* MIDI parameter control settings for Evolution One were not set when loading a project. Solved.
* Solved a timing issue for MIDI events being recorded from a AU MIDI processor.
* Marquee selection in the piano roll did not handle scrolling correctly. Solved.
* Selected events in the piano roll could be moved to a negative offset. Solved.
* When a MIDI device transmitted Active Sensing events, this could lead to other MIDI events not being parsed correctly, which could result in hanging notes etc.
and more..

* Many actions can now be done during playback, most of them without a pause, some with a short pause.
* Changed the colors of the piano roll and drum pattern editor into a dark mode.
* Added a 'Multi-instrument' option when creating a drum pattern track: in this mode, you can assign an audio file or a sound from a Soundfont to a drum 'lane'. This makes it possible to use your own sounds in the drum pattern editor. Each drum lane now also features its own audio processing chain, meaning that it has its own effects grid, volume, panning, ADSR, pitch shift and basic reverb controls. You can use the iOS drap & drop mechanism to import drum sounds as well (max. file size 4MB).
* A free drum sound pack consisting of 80 high quality drum samples for use with the multi-instrument drum pattern editor can be downloaded. It features a wide range of kicks, snares, hihats, toms, etc. sorted by different genres: 80's Retrowave, Acoustic, EDM, Foley, Hip Hop, Industrial and Reggaeton.
* Optional in-app purchase to extend the free drum sound pack with 420 more high quality drum samples.
* Added multi-output support for AUv3 instruments. Additional outputs can be sent to mix busses.
* New Settings screen to match the app's style.
* Multiple mixer controls can now be adjusted simultaneously.
* Added an 'Import Soundfont' option to the instrument selection dialog (although Soundfonts can always be copied directly using the Files app to the AudioEvolution/SoundFonts folder).
* Added a 'Share' option to the file pop-up menu in the file browser.
* Added an option 'Draw grid on top of clips' which now defaults to 'off'.
* Changes to tempo markers can now be undo/redone.
* The audio input dialog now makes it possible to select between different inputs of the device itself, so you can for example select the iPad microphone even if a headset is connected.
* The state of the AU button in the instrument display is now remembered and stored with the project.
* When editing notes outside the current clip area, the clip will now be automatically expanded.
* Added a Quantize option to the pop-up menu of selected notes in the piano roll editor.
* Added a 'Select all' button to the piano roll editor in Edit mode.
* The mixer can now be scrolled when dragging in the volume slider area.
* The available memory is now displayed in the instrument selection dialog. The app will now refuse to load Soundfonts when the available memory is lower than 250MB to prevent out-of-memory crashes.
* Added an 'Auto split' option to the audio clip pop-up menu.
* Added an option 'MIDI loop recording'.
* Added an option to test the new plug-in delay compensation that works for both audio and instrument tracks (non-armed) to the BETA section of the new settings dialog.
* The size of the AU MIDI view is now remembered and stored in the project (half/full size) and the option 'Open AU in full screen' has been removed from the Settings.
* Portuguese translation
* Solved a crash that could occur when MIDI was received while adding or removing a track.
* Replacing an effect with the display active of the target effect block could cause a crash. Solved.
* A split point could be erroneously added when moving your finger beyond the display edge. Solved.
* Long-tapping a position on the arranger screen and selecting Paste could paste at the wrong location. Solved.
* MIDI parameter control settings for Evolution One were not set when loading a project. Solved.
* Solved a timing issue for MIDI events being recorded from a AU MIDI processor.
* Marquee selection in the piano roll did not handle scrolling correctly. Solved.
* Selected events in the piano roll could be moved to a negative offset. Solved.
* When a MIDI device transmitted Active Sensing events, this could lead to other MIDI events not being parsed correctly, which could result in hanging notes etc.
and more..

* Many actions can now be done during playback, most of them without a pause, some with a short pause.
* Changed the colors of the piano roll and drum pattern editor into a dark mode.
* Added a 'Multi-instrument' option when creating a drum pattern track: in this mode, you can assign an audio file or a sound from a Soundfont to a drum 'lane'. This makes it possible to use your own sounds in the drum pattern editor. Each drum lane now also features its own audio processing chain, meaning that it has its own effects grid, volume, panning, ADSR, pitch shift and basic reverb controls. You can use the iOS drap & drop mechanism to import drum sounds as well (max. file size 4MB).
* A free drum sound pack consisting of 80 high quality drum samples for use with the multi-instrument drum pattern editor can be downloaded. It features a wide range of kicks, snares, hihats, toms, etc. sorted by different genres: 80's Retrowave, Acoustic, EDM, Foley, Hip Hop, Industrial and Reggaeton.
* Optional in-app purchase to extend the free drum sound pack with 420 more high quality drum samples.
* Added multi-output support for AUv3 instruments. Additional outputs can be sent to mix busses.
* New Settings screen to match the app's style.
* Multiple mixer controls can now be adjusted simultaneously.
* Added an 'Import Soundfont' option to the instrument selection dialog (although Soundfonts can always be copied directly using the Files app to the AudioEvolution/SoundFonts folder).
* Added a 'Share' option to the file pop-up menu in the file browser.
* Added an option 'Draw grid on top of clips' which now defaults to 'off'.
* Changes to tempo markers can now be undo/redone.
* The audio input dialog now makes it possible to select between different inputs of the device itself, so you can for example select the iPad microphone even if a headset is connected.
* The state of the AU button in the instrument display is now remembered and stored with the project.
* When editing notes outside the current clip area, the clip will now be automatically expanded.
* Added a Quantize option to the pop-up menu of selected notes in the piano roll editor.
* Added a 'Select all' button to the piano roll editor in Edit mode.
* The mixer can now be scrolled when dragging in the volume slider area.
* The available memory is now displayed in the instrument selection dialog. The app will now refuse to load Soundfonts when the available memory is lower than 250MB to prevent out-of-memory crashes.
* Added an 'Auto split' option to the audio clip pop-up menu.
* Added an option 'MIDI loop recording'.
* Added an option to test the new plug-in delay compensation that works for both audio and instrument tracks (non-armed) to the BETA section of the new settings dialog.
* The size of the AU MIDI view is now remembered and stored in the project (half/full size) and the option 'Open AU in full screen' has been removed from the Settings.
* Portuguese translation
* Solved a crash that could occur when MIDI was received while adding or removing a track.
* Replacing an effect with the display active of the target effect block could cause a crash. Solved.
* A split point could be erroneously added when moving your finger beyond the display edge. Solved.
* Long-tapping a position on the arranger screen and selecting Paste could paste at the wrong location. Solved.
* MIDI parameter control settings for Evolution One were not set when loading a project. Solved.\n"
* Solved a timing issue for MIDI events being recorded from a AU MIDI processor.
* Marquee selection in the piano roll did not handle scrolling correctly. Solved.
* Selected events in the piano roll could be moved to a negative offset. Solved.
* Pasting a MIDI clip with multiple MIDI channels would reset all the MIDI channels to one and the same channel. Solved.
* When a MIDI device transmitted Active Sensing events, this could lead to other MIDI events not being parsed correctly, which could result in hanging notes etc.
and more..

* Many actions can now be done during playback, most of them without a pause, some with a short pause.
* Changed the colors of the piano roll and drum pattern editor into a dark mode.
* Added a 'Multi-instrument' option when creating a drum pattern track: in this mode, you can assign an audio file or a sound from a Soundfont to a drum 'lane'. This makes it possible to use your own sounds in the drum pattern editor. Each drum lane now also features its own audio processing chain, meaning that it has its own effects grid, volume, panning, ADSR, pitch shift and basic reverb controls. You can use the iOS drap & drop mechanism to import drum sounds as well (max. file size 4MB).
* A free drum sound pack consisting of 80 high quality drum samples for use with the multi-instrument drum pattern editor can be downloaded. It features a wide range of kicks, snares, hihats, toms, etc. sorted by different genres: 80's Retrowave, Acoustic, EDM, Foley, Hip Hop, Industrial and Reggaeton.
* Optional in-app purchase to extend the free drum sound pack with 420 more high quality drum samples.
* Added multi-output support for AUv3 instruments. Additional outputs can be sent to mix busses.
* New Settings screen to match the app's style.
* Multiple mixer controls can now be adjusted simultaneously.
* Added an 'Import Soundfont' option to the instrument selection dialog (although Soundfonts can always be copied directly using the Files app to the AudioEvolution/SoundFonts folder).
* Added a 'Share' option to the file pop-up menu in the file browser.
* Added an option 'Draw grid on top of clips' which now defaults to 'off'.
* Changes to tempo markers can now be undo/redone.
* The audio input dialog now makes it possible to select between different inputs of the device itself, so you can for example select the iPad microphone even if a headset is connected.
* The state of the AU button in the instrument display is now remembered and stored with the project.
* When editing notes outside the current clip area, the clip will now be automatically expanded.
* Added a Quantize option to the pop-up menu of selected notes in the piano roll editor.
* Added a 'Select all' button to the piano roll editor in Edit mode.
* The mixer can now be scrolled when dragging in the volume slider area.
* The available memory is now displayed in the instrument selection dialog. The app will now refuse to load Soundfonts when the available memory is lower than 250MB to prevent out-of-memory crashes.
* Added an 'Auto split' option to the audio clip pop-up menu.
* Added an option 'MIDI loop recording'.
* Added an option to test the new plug-in delay compensation that works for both audio and instrument tracks (non-armed) to the BETA section of the new settings dialog.
* The size of the AU MIDI view is now remembered and stored in the project (half/full size) and the option 'Open AU in full screen' has been removed from the Settings.
* Portuguese translation

* Solved a crash that could occur when MIDI was received while adding or removing a track.
* Replacing an effect with the display active of the target effect block could cause a crash. Solved.
* A split point could be erroneously added when moving your finger beyond the display edge. Solved.
* Long-tapping a position on the arranger screen and selecting Paste could paste at the wrong location. Solved.
* MIDI parameter control settings for Evolution One were not set when loading a project. Solved.\n"
* Solved a timing issue for MIDI events being recorded from a AU MIDI processor.
* Marquee selection in the piano roll did not handle scrolling correctly. Solved.
* Selected events in the piano roll could be moved to a negative offset. Solved.
* Pasting a MIDI clip with multiple MIDI channels would reset all the MIDI channels to one and the same channel. Solved.
* AudioShare stopped working in iOS18. Solved.

and more..

* Many actions can now be done during playback, most of them without a pause, some with a short pause.
* Changed the colors of the piano roll and drum pattern editor into a dark mode.
* Added a 'Multi-instrument' option when creating a drum pattern track: in this mode, you can assign an audio file or a sound from a Soundfont to a drum 'lane'. This makes it possible to use your own sounds in the drum pattern editor. Each drum lane now also features its own audio processing chain, meaning that it has its own effects grid, volume, panning, ADSR, pitch shift and basic reverb controls. You can use the iOS drap & drop mechanism to import drum sounds as well (max. file size 4MB).
* A free drum sound pack consisting of 80 high quality drum samples for use with the multi-instrument drum pattern editor can be downloaded. It features a wide range of kicks, snares, hihats, toms, etc. sorted by different genres: 80's Retrowave, Acoustic, EDM, Foley, Hip Hop, Industrial and Reggaeton.
* Optional in-app purchase to extend the free drum sound pack with 420 more high quality drum samples.
* Added multi-output support for AUv3 instruments. Additional outputs can be sent to mix busses.
* New Settings screen to match the app's style.
* Multiple mixer controls can now be adjusted simultaneously.
* Added an 'Import Soundfont' option to the instrument selection dialog (although Soundfonts can always be copied directly using the Files app to the AudioEvolution/SoundFonts folder).
* Added a 'Share' option to the file pop-up menu in the file browser.
* Added an option 'Draw grid on top of clips' which now defaults to 'off'.
* Changes to tempo markers can now be undo/redone.
* The audio input dialog now makes it possible to select between different inputs of the device itself, so you can for example select the iPad microphone even if a headset is connected.
* The state of the AU button in the instrument display is now remembered and stored with the project.
* When editing notes outside the current clip area, the clip will now be automatically expanded.
* Added a Quantize option to the pop-up menu of selected notes in the piano roll editor.
* Added a 'Select all' button to the piano roll editor in Edit mode.
* The mixer can now be scrolled when dragging in the volume slider area.
* The available memory is now displayed in the instrument selection dialog. The app will now refuse to load Soundfonts when the available memory is lower than 250MB to prevent out-of-memory crashes.
* Added an 'Auto split' option to the audio clip pop-up menu.
* Added an option 'MIDI loop recording'.
* Added an option to test the new plug-in delay compensation that works for both audio and instrument tracks (non-armed) to the BETA section of the new settings dialog.
* The size of the AU MIDI view is now remembered and stored in the project (half/full size) and the option 'Open AU in full screen' has been removed from the Settings.
* Portuguese translation

* Solved a crash that could occur when MIDI was received while adding or removing a track.
* Replacing an effect with the display active of the target effect block could cause a crash. Solved.
* A split point could be erroneously added when moving your finger beyond the display edge. Solved.
* Long-tapping a position on the arranger screen and selecting Paste could paste at the wrong location. Solved.
* MIDI parameter control settings for Evolution One were not set when loading a project. Solved.\n"
* Solved a timing issue for MIDI events being recorded from a AU MIDI processor.
* Marquee selection in the piano roll did not handle scrolling correctly. Solved.
* Selected events in the piano roll could be moved to a negative offset. Solved.
* Pasting a MIDI clip with multiple MIDI channels would reset all the MIDI channels to one and the same channel. Solved.
* AudioShare stopped working in iOS18. Solved.

and more..

* Many actions can now be done during playback, most of them without a pause, some with a short pause.
* Changed the colors of the piano roll and drum pattern editor into a dark mode.
* Added a 'Multi-instrument' option when creating a drum pattern track: in this mode, you can assign an audio file or a sound from a Soundfont to a drum 'lane'. This makes it possible to use your own sounds in the drum pattern editor. Each drum lane now also features its own audio processing chain, meaning that it has its own effects grid, volume, panning, ADSR, pitch shift and basic reverb controls. You can use the iOS drap & drop mechanism to import drum sounds as well (max. file size 4MB).
* A free drum sound pack consisting of 80 high quality drum samples for use with the multi-instrument drum pattern editor can be downloaded. It features a wide range of kicks, snares, hihats, toms, etc. sorted by different genres: 80's Retrowave, Acoustic, EDM, Foley, Hip Hop, Industrial and Reggaeton.
* Optional in-app purchase to extend the free drum sound pack with 420 more high quality drum samples.
* Added multi-output support for AUv3 instruments. Additional outputs can be sent to mix busses.
* New Settings screen to match the app's style.
* Multiple mixer controls can now be adjusted simultaneously.
* Added an 'Import Soundfont' option to the instrument selection dialog (although Soundfonts can always be copied directly using the Files app to the AudioEvolution/SoundFonts folder).
* Added a 'Share' option to the file pop-up menu in the file browser.
* Added an option 'Draw grid on top of clips' which now defaults to 'off'.
* Changes to tempo markers can now be undo/redone.
* The audio input dialog now makes it possible to select between different inputs of the device itself, so you can for example select the iPad microphone even if a headset is connected.
* The state of the AU button in the instrument display is now remembered and stored with the project.
* When editing notes outside the current clip area, the clip will now be automatically expanded.
* Added a Quantize option to the pop-up menu of selected notes in the piano roll editor.
* Added a 'Select all' button to the piano roll editor in Edit mode.
* The mixer can now be scrolled when dragging in the volume slider area.
* The available memory is now displayed in the instrument selection dialog. The app will now refuse to load Soundfonts when the available memory is lower than 250MB to prevent out-of-memory crashes.
* Added an 'Auto split' option to the audio clip pop-up menu.
* Added an option 'MIDI loop recording'.
* Added an option to test the new plug-in delay compensation that works for both audio and instrument tracks (non-armed) to the BETA section of the new settings dialog.
* The size of the AU MIDI view is now remembered and stored in the project (half/full size) and the option 'Open AU in full screen' has been removed from the Settings.
* Portuguese translation

* Solved a crash that could occur when MIDI was received while adding or removing a track.
* Replacing an effect with the display active of the target effect block could cause a crash. Solved.
* A split point could be erroneously added when moving your finger beyond the display edge. Solved.
* Long-tapping a position on the arranger screen and selecting Paste could paste at the wrong location. Solved.
* MIDI parameter control settings for Evolution One were not set when loading a project. Solved.\n"
* Solved a timing issue for MIDI events being recorded from a AU MIDI processor.
* Marquee selection in the piano roll did not handle scrolling correctly. Solved.
* Selected events in the piano roll could be moved to a negative offset. Solved.
* Pasting a MIDI clip with multiple MIDI channels would reset all the MIDI channels to one and the same channel. Solved.
* AudioShare stopped working in iOS18. Solved.

and more..

* 6.5.1: Solved an issue with 6.5.0 where the app could crash when 'Send MIDI clock sync' was active.
* 6.5.0: Possible work-around for a recent iOS bug where the purchase receipt was lost.

Solved a crash introduced accidentally in v5.9.9 when pressing the MIDI button for an effect.

The transpose option wasn't correctly stored in the project. Solved.

Solved an issue with undo-ing added note events in the piano roll.

* Clips can now be removed during playback (with a small pause).
* Attempting to split an audio clip at its start (for example due to the grid setting) could cause an error message that the length of the audio clip was negative or zero. Solved.
* Solved a crash that could occur when MIDI input was received during loading of a project.
* A center pitch bend event is now sent at the start of playback for tracks using a SoundFont.

* Added the Toneboosters Lowtone synth (in-app purchase required). TB Lowtone is an innovative bass synthesizer plug-in featuring three voltage-controlled oscillators with a large variety of waveform algorithms, continuous pulse-width modulation (PWM), Frequency Modulation (FM) and oscillator hard sync, complemented by a voltage-controlled noise synthesizer, parameter modulation a re-designed non-linear voltage controlled filter.
TB Lowtone is the world's first bass synthesizer featuring loudness-domain harmonic synthesis, creating deeper, more consistent and production-ready bass sounds compared to conventional synthesizers operating in the (linear) amplitude domain.
* Added 'Output velocity range' to the MIDI input dialog.
* Replaced the I (I/O meter) at the bottom right with a Master volume indicator (M).
* Removed the 'Show CPU usage' option (it will now always be displayed).
* Added a setting 'Preview soundfont' which can be turned off if you don't want to hear a sound when selecting a Soundfont preset.
* 'Set visually' in the Time Stretch dialog did not work in the 'Beginner' user interface mode. Solved.
* Mixdown could crash when multi-core processing was turned on. Solved.
* Using a (pure) MIDI track would crash on MIDI input. Solved.
* Applying touch automation for AUv3's with loop playback did not add the automation points at the correct time. Solved.
* Mixing down with resampling always resulted in a 32-bit floating point WAV file. Solved.
* Added an option 'Ignore MIDI CC11 for SoundFonts' to the USB MIDI settings so you can use an expression pedal for other purposes.

* Added a 'Ghost tracks' button to the piano roll editor. You can choose to display the notes of all or a selection of other MIDI tracks. This makes it easy to align notes with notes of other tracks.
* Automation of AUv3 boolean parameters is now quantized to 0 and 1.

* Added experimental multi-core support to the settings. By default it is turned off. There are two methods to experiment with.
* Added a 'Draw' toggle to the Note length section in the piano roll editor. When active, the length of a note can be 'drawn'. Short taps add notes according to the selected length.
* Added the free Toneboosters GonioMeter plug-in.
* Freezing a track with Vocal Tune Studio would still play it on the frozen track. Solved.
* FlowTones and most Toneboosters V4 effects are now updated to the latest versions.

Solved an issue with the timing offset of MIDI AUv3 effects

* Added 32-bit and 32-bit float recording file format options. The 32-bit float option can be used to fully utilize the potential with recording devices such as the Zoom UAC-232.
* The first note(s) of an instrument track could erroneously play during count-in in some situations. Solved.

* 'Mute during count-in' state was not set correctly when opening the Tempo dialog. Solved.
* When recording notes played on an AUv3 instrument (as opposed to the virtual or external keyboard), the timestamp was incorrect when using count-in or recording from an offset. Solved.
* Solved an issue with loop playback of MIDI clips.

* The pitch of the metronome sound will not change anymore when changing sample rate.
* Solved issue with solo on instruments not working anymore in v572.

v5.7.2:
* New 'Clean up project' dialog that takes all project files of the project into account. File references of all project files are gathered to determine which audio files can be deleted.
* The Media Server works again on iOS14+.
* MIDI Parameter feedback did not work for busses. Solved.
* Bus volume could only be controlled up to 0dB using MIDI Remote Setup. Solved.
* Vocal Tune Pro now updates its controls after loading a preset or applying automation.
* Added a MIDI remote setup command 'Next button' which can be used to press the Next button from a MIDI control.
* Optimized effect processing chain for better cache utilisation which improves performance slightly.

* New 'Clean up project' dialog that takes all project files of the project into account. File references of all project files are gathered to determine which audio files can be deleted.
* The Media Server works again on iOS14+.
* MIDI Parameter feedback did not work for busses. Solved.
* Bus volume could only be controlled up to 0dB using MIDI Remote Setup. Solved.
* Vocal Tune Pro now updates its controls after loading a preset or applying automation.
* Added a MIDI remote setup command 'Next button' which can be used to press the Next button from a MIDI control.
* Optimized effect processing chain for better cache utilisation which improves performance slightly.

What's new in version 5.6.7:
* AU MIDI was not displayed when using a pure MIDI track on phones. Solved.
* Tapping outside the Settings dialog will now store the changes as well.

What's new in version 5.6.6:
* Added 2 more AU MIDI effect slots.
* Solved an issue with pasting from the iOS clipboard introduced in the last version.
* Reduced pops when restarting playback when AUv3 effects or instruments are used.
* Improved timing of AU MIDI effects.
* Added an option 'Convert to MIDI track' to the pop-up menu of instrument tracks.
* When connecting a USB MIDI device, the output of a (pure) MIDI track is now set to the new device automatically.

* Added 'Import using the Files app' to the Project menu, using which you can select one or more audio/MIDI files to import from outside the app's private storage space.
* Added a Settings option 'Pixel range to cancel action'. This value determines how much you may move your finger or stylus before the app switches to scrolling instead of popping up a menu or adding a note in the piano roll editor etc.
* Solved a problem with stereo tracks in Vocal Tune Studio that could sound like a phase issue.
* Solved a crash that could occur when adding/modifying automation points during playback.
* Importing multiple files at once using the Files app did not always work. Solved.

* Added support for dragging & dropping audio/MIDI files using Slide-over.
* Added support for pasting audio and MIDI from the iOS system-wide clipboard: use the track's pop-up menu and select 'Paste using iOS pasteboard'.
* Latency compensation only worked for audio tracks. Solved.

* Solved a crash introduced in 5.2.9 when playing back a pure MIDI track.
* Changed some more dialogs to the new design.

Solved a possible crash in the MIDI input dialog.

* Added the Toneboosters BitJuggler, Dual VCF, Voice Pitcher and Sibalance V4 effects.
* Added a preference option 'Max 1 armed track' which makes it easier to switch between sounds on different tracks using a MIDI controller.
* Added a preference option 'Volume slider' to force display of a vertical volume slider on iPhones or horizontal volume on iPads.
* Added an option 'Arm toggles' to the MIDI remote setup -> Tracks section to arm/unarm tracks regardless of the MIDI CC value.
* When an instrument track is unarmed in monitoring mode, the sound is not cut off anymore on other tracks.
* Choosing 'None' for MIDI remote setup did not have effect until restarting the app. Solved.

MIDI remote control setup did not work correctly when multiple tracks were armed and 'Keep channel information' was inactive. Solved.

* Rotation up/down was reversed in generic effects. Solved.
* Solved issue with the display notch in combination with Flowtones.
* Solved issue with Digistix sending 0 as timestamp.

* Added the Toneboosters Flowtones virtual analog synthesizer: Flowtones is a modern, unique-sounding virtual analog synthesizer with two parts featuring two analog-modelled voltage-controlled oscillators (VCOs) each. Each oscillator has an extensive feature set including pulse width and ring modulation, subharmonic synthesis, noise and unison synthesis and a wide range of modulation options. Over 30 analog-modelled VCF filter types, pro-grade effects including a best-in-class formant filter, low-frequency oscillators and envelope generators provide a colourful palette to create a wide range of sounds. Use the intelligent randomizer to create new and unique sounds instantly in addition to the hundreds of categorized presets provided.
* Added a ping pong delay effect.
* Automation can now be edited during playback.
* The piano roll editor can now be opened while playing back.
* Instrument tracks can now be armed and unarmed while playing back/recording.
* Solved possible crash when pressing Undo in the piano roll editor when adding the MIDI clip was the last event.
* Rename markers didn't work. Solved.
* Solved a bug with the wrong tempo being used in AU and IAA effects and instruments, introduced in 5.0.1.
* Rotation method setting did not work. Solved.
* Solved an issue with creating an overlapping MIDI clip.

* Tempo and time signature changes can now be added using the marker area: double tap and select 'Add tempo/time sig change'. A gradual tempo change can also be selected.
* Added a 'MIDI remote setup' option to the More menu to remote control transport commands, mixer controls and ADSR controls of SoundFonts by MIDI CC messages.
* Added a new (free) chorus effect: Dimension D.
* Added the Toneboosters Enhancer V4 effect: season your tracks with Toneboosters' tasty enhancer!
* Audio tracks now can record from the output of another track or bus for advanced applications.
* When replacing a mono audio clip with a stereo clip and a ToneBoosters V3 effect was on the track, the app would crash at playback. Solved.
* Improved MIDI CC editing accuracy on the piano roll.
* Solved a rare crash that could occur when zooming during playback.
* The piano roll editor and virtual keyboard now display note number 60 as C3 instead of C5.
* Piano roll events were not displayed when a MIDI clip was selected. Solved.

* Automation events were not saved in the project for AUv3 effects and instruments. Solved.
* SoundFont packs did not download correctly. Solved.
* The display of several graphs in the Barricade V4 effect could flicker. Solved.

When replacing a stereo audio clip with a mono clip and a ToneBoosters V3 effect was on the track, the app would crash at playback. Solved.

* Selecting 'None' as source track to remove the sidechain didn't work. Solved.
* Changing instruments while playing back could potentially cause a crash. Solved.
* Changing instruments while using a MIDI controller could block MIDI events from being processed for some time. Solved.
* Changing instruments from Evolution One to a AUv3 could cause a crash. Solved.

* Added file preview play/pause buttons in the File browser.
* MIDI files could not be imported directly from the Files app using its Share functionality. Solved.
* Evolution One UI was displayed when adding a AU MIDI. Solved.
* AU MIDI plug-ins couldn't be opened when the transport was not running since 3.0. Solved.

* Added a virtual analog synthesizer 'Evolution One' featuring morphing oscillators, FM, Sub Osc, Noise, Portamento, 2 LFO's that can be routed to 12 targets, Moog type filtering, effects, ARP, sequencer and more!
* Added Vocal Tune PRO effect, a much higher quality pitch correction effect for vocals than the original Vocal Tune. Features the ability to add artificial vibrato and displays pitch deviation. It shares the same in-app purchase as the original Vocal Tune, so if you already own Vocal Tune then Vocal Tune PRO is free.
* Solved issue with parameters from AUv3 effects made by manufacturer DDMF not being saved with the project.
* When two AUv3 effects with the same name were present, loading a project could choose the wrong one. Solved (re-save required).
* When playing a virtual instrument with Loop enabled, notes would cut off at the end of the loop. Solved.

* The effects section has been completely redesigned:
• The 3 insert effect slots have been replaced by a grid on which an unlimited number of effects can be placed.
• The second row of the grid can be used to create parallel effect paths.
• New look for the standard effects featuring rotary controls with an input and output level meter per effect.
• Updated user interface for the graphic EQ to match the new design.
• Modifiers like LFO and 'Lock to tempo' can be added to an effect parameter.
• Effects can be re-ordered, meaning that for example the EQ can be put before or even between inserts
• Mixer channel processing blocks like volume, EQ and effect sends are also displayed on the grid and can therefore be re-ordered as well.
• The position of effect sends in relation to the 'Volume/Pan' block determines pre or post.
• An unlimited number of effect sends can be added.
• The Compressor, ToneBoosters Compressor and AUv3 effects with 2 inputs now have a side-chain feature.
• The Compressor now features a gain reduction meter.
• The effects selection dialog now features 'Effect categories' like Delay, EQ, Last used and Purchased for quicker selection.
• If you are really attached to the 3 effect slots, you can choose that option (or 4 slots) in the preferences.
* Added Toneboosters Barricade V4, EQ V4, ReelBus V4 and Reverb V4 effects (in-app purchase required).
* Added real-time pitch shifter effect.
* Added option to send MIDI clock sync and song position pointer to synchronize external MIDI equipment.
* Added preference option to show marker names instead of a number.
* Added triplet options to drum pattern editor.
* User presets can now be loaded and saved for AUv3 effects.
* When changing the grid size in the drum pattern editor, the notes will not be quantized anymore to the new grid size. Instead, notes that do not 'fit' the grid are drawn with a transparent color.
* The drum pattern editor now features a Velocity button to enter velocity drawing mode instead of going through a drum sound's pop-up menu.
* Audio clips can now be renamed (display name, not their file name).
* Multi-channel audio files containing more than 2 tracks can now be imported and are split into mono tracks.
* Added a 'Time stretch' button to the Edit mode of the piano roll editor to time stretch selected clips.
* Notes in the piano roll editor now contain a line depicting velocity.
* Pitch bend and channel pressure are now more drawn more clear.
* Added a 'Color' option to the track pop-up menu to customize a track's clip color. (iOS14+ only).
* Added 'Split into separate tracks' option to drum pattern track menu.
* Drawing over CC events will now replace them in Draw mode.
* The input of an instrument or MIDI track now defaults to a connected MIDI device (when available).
* Solved crash on iOS14 when sending MIDI.
* New app icon.
* The size of the AU display in the drum pattern editor was incorrect. Solved.
* Solved a possible crash when importing from AudioShare when the app was not running.

* The effects section has been completely redesigned:
• The 3 insert effect slots have been replaced by a grid on which an unlimited number of effects can be placed.
• The second row of the grid can be used to create parallel effect paths.
• New look for the standard effects featuring rotary controls with an input and output level meter per effect.
• Updated user interface for the graphic EQ to match the new design.
• Modifiers like LFO and 'Lock to tempo' can be added to an effect parameter.
• Effects can be re-ordered, meaning that for example the EQ can be put before or even between inserts
• Mixer channel processing blocks like volume, EQ and effect sends are also displayed on the grid and can therefore be re-ordered as well.
• The position of effect sends in relation to the 'Volume/Pan' block determines pre or post.
• An unlimited number of effect sends can be added.
• The Compressor, ToneBoosters Compressor and AUv3 effects with 2 inputs now have a side-chain feature.
• The Compressor now features a gain reduction meter.
• The effects selection dialog now features 'Effect categories' like Delay, EQ, Last used and Purchased for quicker selection.
• If you are really attached to the 3 effect slots, you can choose that option (or 4 slots) in the preferences.
* Added Toneboosters Barricade V4, EQ V4, ReelBus V4 and Reverb V4 effects (in-app purchase required).
* Added real-time pitch shifter effect.
* Added option to send MIDI clock sync and song position pointer to synchronize external MIDI equipment.
* Added preference option to show marker names instead of a number.
* Added triplet options to drum pattern editor.
* When changing the grid size in the drum pattern editor, the notes will not be quantized anymore to the new grid size. Instead, notes that do not 'fit' the grid are drawn with a transparent color.
* The drum pattern editor now features a Velocity button to enter velocity drawing mode instead of going through a drum sound's pop-up menu.
* Audio clips can now be renamed (display name, not their file name).
* Multi-channel audio files containing more than 2 tracks can now be imported and are split into mono tracks.
* Added a 'Time stretch' button to the Edit mode of the piano roll editor to time stretch selected clips.
* Notes in the piano roll editor now contain a line depicting velocity.
* Pitch bend and channel pressure are now more drawn more clear.
* Added a 'Color' option to the track pop-up menu to customize a track's clip color. (iOS14+ only).
* Added 'Split into separate tracks' option to drum pattern track menu.
* Drawing over CC events will now replace them in Draw mode.
* Solved crash on iOS14 when sending MIDI.
* New app icon.

Zooming vertically now centers on zoom point

* Added support for IAA's of type 'Remote instrument' such as AUM as audio input.

* Solved possible crash when selecting 'Try' for an effect that requires an in-app purchase.
* Files with extension .midi are now recognized as MIDI file (next to .mid)
* When unarming a track after pressing pause during recording, pressing pause again would give a message that no track was armed. Solved.

When there are more busses than can be displayed on the screen, trying to delete a bus could cause a crash. Solved.

The beat position sent to AUv3's was off by 1. Solved.

* Solved crash when adding the Xequence AU MIDI (and perhaps others)
* Solved an issue where setting an automation point could cause it to get a value of NaN
* The first MIDI events of a clip would not sound when using count-in. Solved.

Updated AudioBus to solve an issue with some iPad PRO models on iOS13

* Added a button to the AU MIDI view to switch between half and full screen
* Bug fix in metronome

The combination of metronome, loop and a time signature with a denominator other than 4 would cause a crash at the loop end point. Solved.

Solved issue with scanning for BT MIDI devices on iOS13

* Solved dark mode issue.
* Solved crashes on iOS9 introduced with latest build.

* Solved some iOS13 issues
* Projects that contained soundfonts in a subfolder wouldn't load correctly. Solved.

* ‘Add bus’ can now be done with a track armed
* Automation entries could not be added in quick succession. Solved.
* When changing sample rates, the change was not sent to AUv3’s, which could cause a change in pitch
* Adding an effect during playback on the 2nd or 3rd slot when no other effect was present would fail. Solved.
* When selecting ‘Edit (piano roll)’ instead of double-tapping a MIDI clip, tracks were unarmed. Solved.
* Solved a possible crash when removing an effect with automation during playback.

* Added button to the virtual keyboard screen on iPad’s to show the AUv3 full screen
* Solved another problem with ‘Open in’
* Solved wrong timestamp problem when using the AUMidi ‘MIDI tools’
* Fixed a crash that could happen when a IAA or AUv3 failed to initialize
* Keyboard did not hide in Mix-down project. Solved.

Solved a crash when doing a cut ripple on a MIDI track

* Solved a problem importing audio with the ‘Open with’ functionality, for example using AudioShare
* Updated to AudioBus SDK 3.0.7
* ‘Ctrl+S’ now saves the project
* Solved a crash involving AudioBus

* Added 'Split into separate tracks' to the pop-up menu for a drum pattern track.
* Solved crash involving sample rate change and fx sends.
* Solved a problem with loop playback.

* Added ‘Copy to app’ item to the clip and range pop-up menu for audio tracks
* The ‘Next’ button was only partially visible on the iPhone X in the virtual keyboard screen. Solved.
* Output selection for the master channel did not work. Solved.
* Solved an issue where output would become silent.
* When returning from another app (like IAA), the audio session was not active which would result in failure when adding other IAA’s. Solved.
* The app could crash when adding an effect failed while playing. Solved.

AVAudioUnitTypeMusicEffect effects where not loaded from a project. Solved.