7.4.1
2024-01-21
• BPM feature improvements
• update of the App screenshots
7.3.2
2023-10-24
• BPM feature optimisations (adding fine-tuning and slider)
• Bugfixes and improvements
7.3.1
2023-10-07
• Better readability of the control elements in Dark Mode
• Smaller fixes and improvements
7.3.0
2023-08-29
• Audio Engine optimisations for all non-sine signals
• Improved visualisation of the phase view popover
• Variable sweep time calculation fix
MultiTone:
• Added new button for swapping the L/R channels of all tones
• Sequence Play now shows the title of a saved configuration when loading it
7.2.0
2023-06-03
• now supporting 3x16 frequency presets, all fully customisable. Use the arrow buttons to switch between them or just slide the controls.
• the settings button has been moved back to the bottom bar for all devices with larger screens.
• new setting to change the frequency sliders step size (0.01 – 100).
7.1.1
2023-03-22
Small UI fix (sweep tab)
7.1.0
2023-03-14
Support for controlling audio (Play/Pause) from the Control Center and iOS lock screen is now available again in an improved form.
Please note: to use this feature, the "Audio can mix with external sources" setting must be disabled.
7.0.1
2022-11-02
bugfixes and improvements
7.0.0
2022-09-15
Frequency Sweep
• Added new sweep option. You can now choose between fixed and variable frequency sweeps. A custom sweep step size (Hz) and a custom sweep step duration (s) can be freely selected. This gives you a whole new way to customize your frequency sweeps!
MultiTone
• Added menu to save and load sequences
• Added option to give a sequence a custom name and to rename it
• Fixing clicks in sequence play when going from one part to the other
General
• Fixed R+L signals going out of phase
6.6.1
2022-07-05
MultiTone bugfix: correctly loading the saved waveforms after moving to tab, App restart or loading from previously saved configuration
6.6.0
2022-05-14
Dual-Tone
• Fixing distortions when changing frequency during playback
• Fixing an issue with the phase value not being applied when restarting or when changing tabs
Music Notes
• added play/pause button to the music notes view
6.5.0
2022-01-21
• Burst Generator: extensions and design changes. Now supporting shaped bursts and sine bursts
• MultiTone: added Repeat One and Repeat All for the Sequence Play
6.4.1
2021-11-27
Smaller fixes and improvements
6.3.3
2021-10-05
fixing an issue with storing of new preset values
6.3.2
2021-10-03
- update for iPad Mini 6th gen
- several usability optimisations and improvements
6.3.1
2021-09-29
fixing an issue with frequency input range checks
5.4.3
2020-12-15
- further improvements for Apple Silicon
5.4.1
2020-10-22
Ω bugfixes and improvements
5.4.0
2020-10-07
- Updates for iOS 14
- New Notes popover. Now you can make notes for each page individually
- Several optimizations and improvements under the hood to make the App more future proof for upcoming iOS versions, screen size changes, etc.
5.3.1
2020-06-14
Added settings option to allow mixing of audio with external sources. Please Note: for streaming audio over AirPlay 2, this option must be disabled.
5.2.0
2020-05-10
- New “AUTO” button in the oscilloscope view.
- Improved Click Track Generator. Now each click is a single sine wave with a duration of 1ms (1kHz signal). The pause between the clicks can be configured (up to 10 seconds). This tool is ideal for sync testing in a multi-room audio setup.
- Fixed oscilloscope issue when frequency slider is set to logarithmic.
- Fixed a phase issue in the Dual Function Generator. When changing frequencies, the phase went out of sync in some cases.
5.1.0
2020-04-13
- UI updates and improvements. The menu to save or open current configurations is now in the sidebar (top right corner).
- The Min/Max frequency slider values and the max sweep slider value are now changed to buttons that open a popup window for immediate means to enter a new value. Browsing to the settings page to change these values is no longer needed.
- Musical Notes popover has been improved. The window size and button size are now as large as possible for each respective iOS device.
- MultiTone Tab:
- background playback in the sequence view is working again (when the App is in the background)
- 60 seconds is shown as 1:00 now instead of 0:60
- improvements of displayed play time of each block after it has been played
5.0.0
2020-01-28
MultiTone News!
I am very happy to announce a great new feature! The addition of audio sequence playback in the MultiTone Tab.
Now you can create any audio type like a tone, sweep or noise and assign a custom duration. Create as many of these elements and play them sequentially, one after the other. Like with a Playlist. Editing is supported as well. Also re-arranging of the elements is implemented. And there is a nice playback control using buttons for prev/next, play/pause and stop.
Tap on the "Play Sequence" button to get started. Three example configurations will be auto-created at the first start.
4.6.2
2019-12-06
Added back support for iOS 9 (as requested by many users)
4.6.1
2019-11-20
minor fixes
4.6.0
2019-11-02
- update for iOS 13.
- update of UI elements to work better with iOS 13.
- from iOS 13 onwards, the background appearance will be auto-detected at the first time start (Light or Dark appearance).
- improved volume level transitions for Volume Sweeps (pops removed).
- improved non-repetitive Frequency Sweeps (after the Sweep completes, the frequency does not jump back to the starting point).
- added info link about sound and hearing.
3.5.0
2014-07-15
- new Click Track Generator! Now there is a new tool for generating click tracks that are super useful when measuring the latency in a multiroom setup. The click track itself is always 23ms long. The duration between the clicks can be fine-tuned between 23ms and 10 seconds.
- new "Play All / Play Sets" menu available for the MultiTone generator. Either play ALL tones at once. Or select individual tones per each of the available sets and play them separately.
- updated navigation menu. The settings menu is now integrated in the sidebar menu (top right burger button)! The bottom bar provides quick access to all the tools. And the sidebar menu provides access to Settings, About section, Tutorial and the rating button.
- native support for iPad 11"