Heavy Equipment Inspection
Safety & Maintenance OSH HSE
Free
1.1.4for iPhone, iPad and more
Age Rating
Heavy Equipment Inspection Screenshots
About Heavy Equipment Inspection
Lean software for qualified safety inspectors who check heavy machines and work equipment on construction sites in accordance with OSH / DGUV regulations.
Recurring inspections are easily accomplished with this app. Special inspections according to DGUV rule 100-500 chapter 2.12 are implemented for earth-moving machines. Individual checklists or templates can be created for all different types of heavy equipment.
With the app, you can easily perform the visual inspection and annotate measured values. For the electrical measurement and the reading of the vehicle bus system, you still need additional, suitable measuring devices of your choice. You can later include the protocols of the measuring devices to the report from the app.
A CHEQSITE account is required to use this app. Our service team will be happy to assist you with the setup and use. Please also have a look at the instructions on the CHEQSITE YouTube channel.
BENEFITS
- Significant time savings with each inspection.
- Standardized inspection process & documentation.
- Improved transparency and compliance.
- Modern appearance towards customers and employees.
Routine visual checks and expert facility inspections are easily done with the CHEQSITE apps.
FUNCTIONS OVERVIEW
- Inspect on site - no Internet access required.
- Store order data, customer data and contractors.
- Document hazards with photos.
- Assign and scan codes / IDs to equipment and facilities, e.g. barcodes, QR codes, etc.
- Use pre-installed checklist templates or create your own inspection lists.
- Generate uniform reports and documentation.
Please also have a look at the service offers on our website. If you wish to make a site audit, a construction snag list, or you need a complete asset management solution, our PRO software team is at your disposal.
Recurring inspections are easily accomplished with this app. Special inspections according to DGUV rule 100-500 chapter 2.12 are implemented for earth-moving machines. Individual checklists or templates can be created for all different types of heavy equipment.
With the app, you can easily perform the visual inspection and annotate measured values. For the electrical measurement and the reading of the vehicle bus system, you still need additional, suitable measuring devices of your choice. You can later include the protocols of the measuring devices to the report from the app.
A CHEQSITE account is required to use this app. Our service team will be happy to assist you with the setup and use. Please also have a look at the instructions on the CHEQSITE YouTube channel.
BENEFITS
- Significant time savings with each inspection.
- Standardized inspection process & documentation.
- Improved transparency and compliance.
- Modern appearance towards customers and employees.
Routine visual checks and expert facility inspections are easily done with the CHEQSITE apps.
FUNCTIONS OVERVIEW
- Inspect on site - no Internet access required.
- Store order data, customer data and contractors.
- Document hazards with photos.
- Assign and scan codes / IDs to equipment and facilities, e.g. barcodes, QR codes, etc.
- Use pre-installed checklist templates or create your own inspection lists.
- Generate uniform reports and documentation.
Please also have a look at the service offers on our website. If you wish to make a site audit, a construction snag list, or you need a complete asset management solution, our PRO software team is at your disposal.
Show More
What's New in the Latest Version 1.1.4
Last updated on Feb 28, 2024
Old Versions
- Significantly faster uploading of files and images is now possible. This is a particular advantage for larger inspections.
- The customer number is displayed in each card in the overview / list of inspections.
- The customer number is displayed in each card in the overview / list of inspections.
Show More
Version History
1.1.4
Feb 28, 2024
- Significantly faster uploading of files and images is now possible. This is a particular advantage for larger inspections.
- The customer number is displayed in each card in the overview / list of inspections.
- The customer number is displayed in each card in the overview / list of inspections.
1.1.3
Feb 7, 2024
- Standardized date labels between all platform.
- New date field added to inspection items, which represents the date of the current inspection. The date from the inspection item can now be transferred to the inventory item so that the date of the last and next inspection can always be calculated in the inventory item.
- Selection of “Is template” now works as desired.
- Filter on selected lists available.
- Multi-click next to a dialog closes the dialog.
- Customer contact data standardized between all platforms.
- New date field added to inspection items, which represents the date of the current inspection. The date from the inspection item can now be transferred to the inventory item so that the date of the last and next inspection can always be calculated in the inventory item.
- Selection of “Is template” now works as desired.
- Filter on selected lists available.
- Multi-click next to a dialog closes the dialog.
- Customer contact data standardized between all platforms.
1.1.2
Jan 6, 2024
- Customer and contractor are now only displayed once in PDF reports.
- Labels in customer data standardized between iOS and Windows.
- Labels in customer data standardized between iOS and Windows.
1.1.1
Jan 4, 2024
- Further improved the download of files for offline work. Also customized the user notifications.
- Signatures in inspection reports are positioned closer to the signature line.
- Support for ZIP files in preparation for the function in the MacOS and Windows PC software, which will make it possible to generate individual PDF files for each test object.
- When you click “Add Photos”, the editing mode is displayed immediately.
- The customer is displayed in an inventory item even if no logo is set.
- Minor improvements to the user interface.
- Signatures in inspection reports are positioned closer to the signature line.
- Support for ZIP files in preparation for the function in the MacOS and Windows PC software, which will make it possible to generate individual PDF files for each test object.
- When you click “Add Photos”, the editing mode is displayed immediately.
- The customer is displayed in an inventory item even if no logo is set.
- Minor improvements to the user interface.
1.1.0
Nov 27, 2023
- The cause of the iPad app closing unexpectedly during synchronization has been detected and resolved. This also applies to sorting inspections by creation date and subsequent search.
- Clicking next to the create inventory popup no longer causes the screen to be unresponsive for a short time.
- Displayed messages have been revised.
- Clicking next to the create inventory popup no longer causes the screen to be unresponsive for a short time.
- Displayed messages have been revised.
1.0.12
Nov 17, 2023
- "Make inspections available to work offline" option is highlighted when clicking on the cloud icon.
- Data synchronization has been revised and improved.
- In the overview of inspections, each inspection card shows when "Make inspection available for offline work" was successfully completed.
- The user interface is updated when you add, update or delete an object, e.g. an inspection, an inspection list, etc.
- Many minor improvements.
- Data synchronization has been revised and improved.
- In the overview of inspections, each inspection card shows when "Make inspection available for offline work" was successfully completed.
- The user interface is updated when you add, update or delete an object, e.g. an inspection, an inspection list, etc.
- Many minor improvements.
1.0.11
Nov 8, 2023
- NFC tags can now be scanned in the app. For example, you can scan an NFC tag with an inspection item number and the matching inspection item is displayed.
1.0.10
Oct 28, 2023
- Inspection interval from inventory templates is copied when adding the inventory template to an inventory object.
- Inspection list templates can be assigned in an inventory template.
- Inspection list templates can be assigned in an inventory template.
1.0.9
Aug 1, 2023
- Make your data synchronization seamless across various systems and stay in complete control. Compatible with iPhone, iPad, Mac OS, Windows PC, Linux and Smartphones.
- The all-new inventory management helps you easily organize your inventory objects. Keep track of the history and changes of each inspected object.
- Use versatile inventory templates to enter data of similar items / objects in no time.
- Create specific assessment templates with custom responses and color codes for individual checklists.
- Manage customer data and contractors separately for added convenience.
- Enhanced employee and inspection scheduling, e.g., assign specific tasks only to selected team members.
- Benefit further from numerous improvements and bug fixes for iOS 16+.
- The all-new inventory management helps you easily organize your inventory objects. Keep track of the history and changes of each inspected object.
- Use versatile inventory templates to enter data of similar items / objects in no time.
- Create specific assessment templates with custom responses and color codes for individual checklists.
- Manage customer data and contractors separately for added convenience.
- Enhanced employee and inspection scheduling, e.g., assign specific tasks only to selected team members.
- Benefit further from numerous improvements and bug fixes for iOS 16+.
1.0.8
Nov 16, 2021
- Further improved features to edit photos of defects and custom markers
- Additional performance improvements and bug fixes
- Additional performance improvements and bug fixes
1.0.7
Oct 2, 2021
- Images of defects can now be tagged with custom markers
- Additional assessment options with further differentiation of colors
- iOS 15 performance improvements and bug fixes
- Additional assessment options with further differentiation of colors
- iOS 15 performance improvements and bug fixes
1.0.6
Nov 27, 2020
- Further iOS 14 improvements.
1.0.5
Oct 30, 2020
- Many improvements and bugfixes for iOS 14.
- Scan codes and find Inspection items.
- Remove exported app data from device memory.
- Scan codes and find Inspection items.
- Remove exported app data from device memory.
1.0.4
Nov 13, 2019
- iOS 13 Verbesserungen und Bugfixes.
- Aktualisierte Dokumentation gem. DGUV Regel 100-500 Kapitel 2.12
- Neue Übersichten in Berichten u.a. nach Bewertungstyp.
- Bericht mit Logo des Auftragnehmers auf jeder Berichtsseite.
- Fotos im Bericht können direkt bei Gefährdungen / Bewertungen in der Checkliste angezeigt werden.
- Aktualisierte Dokumentation gem. DGUV Regel 100-500 Kapitel 2.12
- Neue Übersichten in Berichten u.a. nach Bewertungstyp.
- Bericht mit Logo des Auftragnehmers auf jeder Berichtsseite.
- Fotos im Bericht können direkt bei Gefährdungen / Bewertungen in der Checkliste angezeigt werden.
1.0.3
Oct 23, 2017
- Exportieren einzelner Prüfungen und Vorlagen ist jetzt direkt aus einer Prüfung oder Vorlage möglich
- Berichte generieren mit neuer Option "nur mit Bewertung"
- Im Bericht werden alle geprüften Objekte angezeigt, auch wenn keine Gefährdungen / Bewertungen vorhanden sind
- iOS 11 Bugfixes
- Berichte generieren mit neuer Option "nur mit Bewertung"
- Im Bericht werden alle geprüften Objekte angezeigt, auch wenn keine Gefährdungen / Bewertungen vorhanden sind
- iOS 11 Bugfixes
1.0.2
Jun 8, 2017
Heavy Equipment Inspection FAQ
Click here to learn how to download Heavy Equipment Inspection in restricted country or region.
Check the following list to see the minimum requirements of Heavy Equipment Inspection.
iPhone
Requires iOS 13.0 or later.
iPad
Requires iPadOS 13.0 or later.
iPod touch
Requires iOS 13.0 or later.
Heavy Equipment Inspection supports English, German, Italian, Spanish