1.33.4
2023-10-25
• Added support for McWong Kinetic Switch (primarily N.A. market)
1.33.3
2023-07-13
• Added support for EnOcean PTM-216B Switch
1.33.2
2023-06-09
• Bugfixes and performance improvements
1.33.1
2023-03-07
• ELT improvements
We have introduced changes to how emergency lighting test results are gathered and presented in the app.
• Bugfixes and stability improvements
We have fixed a number of minor bugs and performance issues.
1.33
2023-02-09
• ELT improvements
We have introduced changes to how emergency lighting test results are gathered and presented in the app.
• Bugfixes and stability improvements
We have fixed a number of minor bugs and performance issues.
1.32
2022-06-30
• Account removal
We are introducing an in-app account deletion option to provide users with greater control over their personal data.
• Simplified user name field
We are replacing the “First name” and “Last name” fields with a single “Full name” field to better support our users from different countries and cultures.
• Editable user account data
Users can now edit their basic account information (full name & company name) that they provided when they created their account.
1.31
2022-06-02
• Manual selection of Time Authority
We are adding the possibility of manual selection of Time Authority. Users will now be able to choose which device should perform this function.
1.30.3
2022-04-22
• Bugfixes and performance improvements.
1.30.2
2022-03-24
• Bugfixes and performance improvements.
1.30.1
2021-11-22
• Configurable attention sequence
The app now supports the alternative attention sequence that was introduced for non-standard luminaires (high-bay LEDs, high-power luminaires, etc.)
1.30
2021-10-07
• In-node scheduling
We are introducing the in-node scheduling service to enable cost-efficient scheduling in installations without the Internet connection.
• Occupancy events history for detection of false triggering
We are adding a sensor troubleshooting tool that will enable users to view the occupancy events history in order to easily detect false sensor triggering.
1.29
2021-08-12
• Device-level mesh quality tests
We are improving the granularity of mesh quality tests so that test results are now provided individually for each device within the tested zone.
1.27
2020-12-22
• Faster and more transparent calibration
The “parallel connections” feature introduced in the previous release has now been applied also to the calibration process, reducing the calibration time by up to 50% and providing users with clear progress information.
• Support for Spanish and traditional Chinese
Our mobile app now supports two additional languages: Spanish and traditional Chinese.
1.26
2020-11-05
• Faster configuration with parallel connections
Devices can now be configured via multiple parallel connections. In certain configuration scenarios, this can reduce the total configuration time by even up to 5x.
• Light levels for scenes A and B configurable in the profile
Light levels for scenes A and B can now be defined directly on the profile screen during the remote planning/pre-commissioning stage.
• Simplified over-the-air update process
The OTAU screen now displays each device’s firmware version number and informs how many devices within each zone require an update.
• Improved sensor calibration in projects with zone linking
Once the calibration process is completed within a given zone, it will no longer restore automatic control in the zones that are linked to that zone.
• Current light sensor lux level reading
Whenever you open the sensor panel, the app will now ask the sensor about its current lux level reading and display that information on the screen.
1.25
2020-09-24
• More profile customization options
You no longer have to switch to the web app to customize the manual override timeout or low/high end trim settings.
• Faster configuration
We’ve accelerated the configuration process, reducing the time required to configure individual nodes by up to 50%.
• Screen lock prevention
For as long as it remains in use, the mobile app will now disable your smartphone’s automatic screen locking functionality.
• Support for Chinese and Korean
The mobile app is now available in two more languages - Chinese and Korean.
1.22
2020-06-10
• All devices within a given area can be configured at once.
• The search panel in the diagnostics window helps to find a cell that contains the searched string.
1.20
2020-03-02
• Default light level parameter can be changed after opening customization view in manual control scenarios.
• Fade time parameter can be customized for default light level in manual control scenarios.
• When adding incompatible EnOcean device to the zone, 'Device is not supported' error message is displayed.
• Non-activated devices and devices not available for commissioning are clearly distinguished on a devices list while adding.
• Daylight harvesting calibration improvements. Now defining minimum light level is required to perform light sensor calibration.
• Improvements in views showing light level and color temperature sliders.
• Added error message when RPL limit is exceeded.
• Diagnostic panel improvements.
• French language support.
1.19
2020-01-09
• Added end user role to collaborators. End users can view the project and control devices in zones, but cannot make any changes.
• Central Control scenario shows sensor data in test tab.
• After opening the area view with a list of zones, the name of that area is displayed on the top bar.
• When logging out of the app, user sees the username (the email address provided during registration).
• The color temperature slider is removed from profile customization view and is now available in the test tab.
• Stability and performance improvements.
• Default light level parameter can be customized for Manual control scenarios.
1.18
2019-12-05
• Added manager and installer user roles to the commissioning project management. Each role has a set of varied user permissions.
• Added user role picker for inviting new collaborators to the project.
• User roles are displayed on collaborators list and on pending invitations.
• When a device is disconnected from Bluetooth, user will see a popup with information “Bluetooth required”.
• Performance improvements and minor bug fixes.
1.17
2019-11-06
• Support for network configuration optimization for large installations. All devices added to the area will work together in a separate subnetwork.
• User Interface adjustments for iOS 13 compatibility.
• Performance improvements.
1.16
2019-09-26
• Upgrades in user experience for commissioning zones with Daylight Harvesting scenario.
• User can select which ALS (ambient light sensor) will be controlling the commissioned zone.
• Color temperature slider added to scenario customize screen. The slider is visible only for devices supporting 2.14 Silvair firmware.
• Fixed issues of firmware updates and calibration view.
1.15.1
2019-09-09
• Additional devices filtering improvements
1.15
2019-09-05
• OTA (over-the-air) update now allows for:
Updating devices in the project with both Silvair and external firmware.
Selecting specific groups of devices for the update.
Performing an update of all nearby devices from selected zones.
Note: Updating devices is possible only for devices with firmware version 2.10 and higher
1.14
2019-07-04
• Improving interoperability in mesh nodes configuration.
• Diagnostic panel improvements
The “Diagnostic” panel for devices added to the network in the Silvair mobile app contains new information in “Configuration parameters” section.
1.13
2019-06-11
• Improved OTA (Over-the-air) update
The app is able to update up to 4 devices simultaneously which reduces the time of updating the whole zone.
• Diagnostic panel improvements
The panel shows additional configuration parameters and network diagnostics.
• Scenario in profile dropdown
When user creates a new zone and selects a profile, the scenario in which this profile operates is displayed below the profile name.
1.12
2019-05-17
OTA (over-the-air) update for devices in the mesh
Silvair firmware is updated without the need to upload a file with firmware. To update external firmware user must provide a firmware file.
Minor bugfixes and general improvements.
1.11
2019-04-26
Integrated OTAU inside the mobile app - ability to perform OTAU of provisioned devices.
Single chip devices and those with external MCU's can be updated with the new OTA process. Please note this is a beta feature.
Changed naming of some commissioning features.
Daylight controller and light sensor calibration - new alerts and warnings added.
1.10.3
2019-03-26
Fixed critical bug with calibration of Light Controller
1.10.2
2019-03-16
Fixed critical bug with calibration of Light Controller with slow responding ambient light sensors
1.10.1
2019-03-01
Bug fixes