Daintree EZ Connect

This update includes the following new features:

- Support adding switches and sensors to multiple Zones in a Room
- Support WWD2-4 switch in dual dimmer switch personality
- Create up to six Zones in a Room for any hardware type
- Support multiple WA220/WA230 room controllers up to 6 relay outputs
- Support unlimited number of WWD2 switches in a Room
- More intuitive page layout and navigation for Zoning and Scenes
- Adds new Auto ON @ Background strategy for Occupancy (firmware update required)
- Adds new Low-End Trim setting for Dimming
- Apply custom names to zones, switches, and scenes within a Room
- Default channel selection for new Rooms is now Automatic

** Note that none of new features are not available for the WIT100 sensor

We've fixed the following issues to improve the stability of the App:

- Incorrect Daylighting behaviour when Occupancy feature is disabled
- Restarting phone Bluetooth after firmware upgrade no longer needed
- App occasionally crashes after certain Scene configurations are saved
- App occasionally crashes after removing ownership of a Room
- App crashes in rare cases when applying certain types of settings Profiles
- App crashes in rare cases when connecting to an older Room
- Occupancy enable/disable button occasionally freezes
- Back button to exit Room screen occasionally disappears
- Too many warnings shown when using the App with GPS enabled
- Devices aren't detected by app when using iOS 12
- Faster page loading after exiting a Room to main menu
- Faster response to errors in removing a switch/sensor from Room
- Minor issues with form length and format validations
- Minor color, layout, and alignment issues on some pages

This update includes the following new features*:

- Supports WOS3 occupancy/daylight sensor
- Supports WWD2-4 scene controller switch (latest firmware required)
- Supports WA220 in two-zone and WA230 in three-zone configurations (latest firmware required)
- New mode for updating firmware on all nearby devices at once
- New control for identifying all lights in a room or zone at once
- Warn user while configuring Room if not all devices were found
- Improved user interface layout for switches page

We've fixed the following issues to improve the stability of the App:

- Errors when aborting in progress WWD2 switch add
- Errors when retrying after a WWD2 switch add failure
- Resolves a rare error preventing ZBT switch add from succeeding in large networks
- Unable to select new light sensor node for WA200 after deleting the previous one
- Star and Loading icons displayed on top of each other
- Removes incorrect option for creating rooms using wireless channel 26


* Note that these new features are not available for the WIT100 sensor

This update includes the following new features:
- Adds "Edit" button to make deleting objects easier to find in the user interface


These new features are not available for the WIT100 sensor:
- Support for WIZ20 occupancy/daylight sensor
- Support for WA210 zone controller device
- Support for WWD2-2 wireless wall dimmer switches
- Group settings into Dimming, Occupancy, and Daylighting categories
- Can disable occupancy detection functionality if desired
- Add Occupancy "control strategy" setting and remove "grace time"
- Rename "settling time" as "dwell time" for better clarity
- Replace "0"/"1" settings with "On"/"Off" for better clarity
- Shorten identify pattern from 60 seconds to 5 seconds
- Replace "chain link" with "data transfer" icon for better clarity
- Adds "diagnostics" feature to display technical information for troubleshooting
- Adds reminder to user to use Automatic channel selection for best performance


We've fixed the following issues to improve the stability of the App:
- Camera zoom is too high by default on recent model phones when scanning barcodes
- "Hold Time" setting description specified the wrong units (secs instead of minutes)
- Wrong channel listed when adding a switch right after creating a room with "auto" channel
- Fixes an issue causing settings save to fail in large networks of WHS20 sensors
- Fixes an issue causing app to freeze after an error while selecting a node to join room
- Fixes an issue causing app to freeze after an error while fetching node details info
- Fixes an issue causing app to crash upon immediately existing a newly created room
- Fixes an issue causing the app to crash occasionally if no nearby sensors are found
- Fixes an issue where device scanning may not restart after finishing commissioning
- Fixes an issue where room node count was incorrectly labelled as a “room” count

This update includes the following new features:

- Adds daylight harvesting calibration for WHS20 sensors
- Adds an audible alert when a device firmware update finishes
- Extend maximum switches per room from four to five
- Show support identifier of nearby rooms belonging to other users
- Cache sensor firmware between updates to reduce data consumption
- Improve clarity of daylight harvesting settings descriptions
- Add description to indicate character length limits for room names
- Prevent screen lock during room commissioning operations
- WHS20 Sensor: Add built-in settings profiles to help new users get started
- WHS20 Sensor: Allow user to select desired settings profile during room creation
- WHS20 Sensor: Allow switch to be used in either orientation (Requires firmware v5.0+)
- WHS20 Sensor: Improve switch commissioning time (Requires firmware v5.0+)
- WHS20 Sensor: Block user from adding switches while sensor commissioning is already active
- WHS20 Sensor: Add "Repair" feature to reconfigure room if sensors are not working correctly
- WHS20 Sensor: Check that firmware is up to date during room connection


We've fixed the following issues to improve the stability of the app:

- Remind users to reset Bluetooth after updating firmware
- Improved signal strength determination when selecting closest nodes
- Improved visual alignment of certain elements throughout the application
- Improved description of Grace Time setting for WHS20 sensors
- Fixes a bug preventing adding nodes to a room after long inactivity
- Fixes a bug that could cause the app to freeze after aborting room creation
- Fixes a bug preventing closing the new account creation dialog screen
- Fixes a bug causing the node to temporarily still appear after being reset
- Fixes several misspellings throughout the application
- Shorten WHS20 device identifiers to improve visual layout
- Removes unneeded "Edit" button from certain firmware selection pages
- Fixes an issue that can occasionally block the user from performing a password reset
- Fixes an issue causing slow responsiveness of the user interface for large networks

This update includes the following new features:
-Support for WHS20 wireless high bay sensors
-Support for wireless firmware update of WHR1 wireless handheld remotes

We've fixed the following issues to improve the stability of the App:
-Resolves issues with the "Back" button during room commissioning
-Added on-screen message text when maximum switch count for room is reached

We've fixed the following issues to improve the stability of the App:
-Fixes an account login error that sometime occurred when waking from sleep
-Fixes an issue where room switch list fails to load immediately after room creation
-Fixes an issue preventing user from leaving a room after aborting room creation
-Removes unnecessary Edit button from room switches list

This update includes the following new features:
- Allows user to create Teams and share Rooms with entire Teams
- Updated color scheme throughout the application
- Apply signal strength averaging for sensor devices
- Adds ability to change the name of existing rooms
- Adds warning text when account is locked after failed logins
- Displays app version number from Account page

We've fixed the following issues to improve the stability of the App:
- Switches could not be deleted if commander sensor is powered off
- Fixes an error causing the sensor to receive multiple disconnects

We've fixed the following issues to improve the stability of the App:
- Fixed an issue where text fields are invisible when using iOS Dark Mode

This update includes the following new features:
- Added ability to remotely manage your Rooms from the Account tab
- Automatic reminder to share Room access with others after creating
- Support for scanning switches with 3D barcodes instead of 2D
- Added new page to assist with changing wireless channel on switches
- Added ability to download latest sensor firmware via the Internet
- Added ability to share updated sensor firmware with the entire room
- Added additional error handling to improve firmware upgrade process
- Reduced loading screen time delay after creating a new room
- Improved login screen design for better usability on some devices
- Autofill last used email address on login and password reset forms
- Now hiding screen contents when app is backgrounded for user privacy
- Update GE Current, a Daintree Company branding and logo

We've fixed the following issues to improve the stability of the App:
- Resolved multiple error handling bugs causing occasional application crashes
- Fixed an Unauthorized error that could appear after long inactivity periods
- Fixed multiple communication issues causing excessive network traffic
- Fixed multiple communication issues causing errors while connecting to sensors
- Fixed a communication issue causing the scan for nodes process to become stuck
- Fixed an issue incorrectly causing the signal strength to appear as +127 or N/A
- Added error handling and retrial mechanism while adding a switch
- Added cancel option to abort failed room creation process
- Added controls to prevent adding more than the maximum allowed 5 switches to a Room
- Handling for latest iOS 13 swipe gestures in text fields and navigation forms
- Detect when another user has added or removed devices from the current room

This update includes the following new features:
- Improved sign up process for new users.
- Adds new custom room profiles feature.
- Adds new Account tab to manage user data.
- Adds cancel button when editing room settings.

We've fixed the following issues to improve the stability of the App:
- Fixes an issue where node scan process becomes stuck after a communication error.
- Fixes an issue where toggling the show/hide password cleared the text box.
- Fixes an issue where recently shared rooms don't show up until app is relaunched.
- Fixes an issue where node remains temporarily in room list after a factory reset.
- Fixes an issue where switch "Edit" button didn't appear after adding a new switch.
- Improved error handling when connected to Wi-Fi networks without Internet.
- Improved input text validation and error handling when editing room settings.
- Improved input text validation and error handling when requesting password resets.
- Prevents password keyboard from overlapping form elements on some phones.

This update includes the following new features:
- Adds helpful descriptions of available room configuration settings
- Adds support for automatic daylight harvesting calibration
- Support for automatic wireless channel selection
- Automatically selects to the best node when connecting to existing rooms

We've fixed the following issues to improve the stability of the App:
- Room became unresponsive while viewing switches list, display issues in app
- Adds timeout and retrial after connection failures through the app
- Nearby room list did not refresh after a new room became available
- Room configuration parameters list did not update after saving a change
- Password form allowed user to type passwords which were too long
- Some text was not visible when user entered long form inputs
- "Select Profile" button could not be tapped under certain conditions
- "Edit" button on nodes tab could not be tapped under certain conditions
- Certain room configuration parameters could not be tapped under certain conditions

This update includes the following new features:
- Can connect to older rooms created with earlier App versions ("legacy" rooms)
- Option to upload room GPS location to help us support you better

We've fixed the following issues to improve the stability of the App:
- Allow user to sign out even when no rooms are nearby
- User was not automatically redirected to login screen after session expired
- Password typed by user was cleared when show/hide button is tapped
- Confirm password text field didn't work under certain conditions
- 'X' close button on registration page led to the wrong place
- 'Already Registered' link on registration page didn't always work
- Allow '.' as a special character in passwords
- Improved text validation and keyboard options
- More helpful descriptions for error message dialog boxes
- Layout and resolution improvements on newer iPhones