3.60
2024-04-05
- Add diagnostic data for BMW / Nissan and Honda
- Improved fault reading on older Peugeot/Citroen (klavkarr only)
- Add new models of vehicle
3.59
2024-01-15
- Fix an issue with new charts (6 bank)
3.56
2023-11-16
- New correction for connection to Engine with manufacturer mode
- Add data for Peugeot 5008 II
- Add DTC description for Volvo
- Improvement for BMW with DS2 protocol (klavkarr only)
3.55
2023-10-23
- Solve an issue to connect to Engine with manufacturer mode
- Display Flow Control with ELM327 device which do not manage frame with lot of data’s
- Improvement for PSA
3.54
2023-10-03
- Improvements for Mitsubishi
- Add support for KW71 protocol PSA (klavkarr only)
3.53
2023-09-06
- Improvements for Nissan (DDL3 protocol)
- Add data for Citroen C4 Picasso
- Add data for Hyundai / Kia
- Maintenance reset for VAG
3.52
2023-07-13
- Solve an issue with selection of parameters for the chart
- Add data for Alfa Romeo / Fiat (Bosch ME 2.1, ME 3.1 Delphi MT25E, MT27E)
- Correction for Toyota (Engine and Hybrid/Electric system)
3.51
2023-06-13
- New design for model selection
- Improvements for Jeep (A/T, All Wheel Drive)
- Improvements for Volvo (Add Engine ECU reference Denso VED/I4D, VEP/I4T, Bosch MED17, …)
- Improvements for Citroen C5 II
3.50
2023-03-24
- Improvement for Mercedes (Add Engine ECU référence MED177, CDI, …)
- Improvement for Volvo (Add Engine ECU référence EDC, DW10, SI6T, …)
- Improvements for VIN decoder
3.49
2023-02-08
- Add fault code definitions for VAG
- Solve an issue with Renault/Dacia to display real time sensors
- Improvements for Jeep
3.46
2022-10-07
- Add ECU reference for Renault/Dacia engine
- Add brand Cupra and Lynk&Co
- New icon
3.45
2022-08-25
- Improvement for Volvo cars produced after 2018
3.44
2022-08-04
- Improvement for BMW
- Improve oil and maintenance reset for Mercedes, Renault and Dacia
3.43
2022-07-18
- Review of status display. The display is now done in the same screen as the faults
3.42
2022-06-22
- Improvement for Renault Zoe (Phase 1 and 2)
3.41
2022-05-22
- Add data for Peugeot 3008 II
- Improvement for Toyota / Lexus (Transmission ECU)
3.40
2022-05-06
Add and improve DTC description for many brands: Volkswagen, Audi, Seat, Mercedes, BMW, Mini, Renault, Dacia.
3.38
2022-03-15
- New application icon
- Add actuator test for Renault / Dacia only available with klavkarr device
- Improvement for service data on PSA, Fiat and BMW vehicle
3.37
2022-02-05
- Added actuator tests for Renault and Dacia available only with klavkarr interfaces
- Improvements for VOLVO vehicles (specific protocol)
- Improvements of maintenance data on VAG
3.36
2022-01-13
- Add actuator test for Peugeot Peugeot 206 / 207 /307 and Citroen C2 / C3 I / C4 I only available with klavkarr device
- Solve display issue with zero value “-0.0”
- Solve an issue when recording last way used with graphics
3.35
2021-11-23
- Improvement for Electric cars
- Improvement for Renault/Dacia
3.33
2021-09-03
- Add Transmission data for VAG
- Improve performance test
2.90
2021-01-15
Improvement for VAG vehicle (Volkswagen, Audi, Seat, Skoda)
- Better support for KW1281 protocol (available only with klavkarr)
- Add data for KW2089 protocol
- Add data for UDS protocol
2.80
2021-01-06
- Report are now available from main screen
- Add data for Fiat, Alfa Romeo
2.70
2020-12-19
- Add systems for Toyota Lexus
- Add data for Citroen C4 and Peugeot 308, 1007 (klavkarr only)
- Improve status display for KW2089 protocol
2.62
2020-11-13
- Improve screen to select ECU (display ECU reference if available)
- New icon
- Add data for Peugeot 208
- Add data for Dacia Duster 2, Renault Megane 4
2.61
2020-10-19
- Solve an issue with parameter selection
- Improve WiFi connection
- Improve detection of Fiat / Alfa / Lancia older KWP protocol vehicle
2.60
2020-10-02
- Improve WiFi connection and iOS 14
2.51
2020-09-25
- Add data for PSA (for 607, 4007)
- Improvement for Fiat (DTC, Sensors)
- Nissan DDL2 protocol improvement for Nissan / Infiniti
- Add manufacturer data for Ford and Mazda
2.50
2020-09-02
- Add data for PSA (for 807, C8)
- Add data for Fiat (Bosch Me7.9.10 Engine)
- Improve reading of DTC with Suzuki
- Improve reading with Additive / AdBlue System
2.49
2020-07-10
- Improve reading of DF code with Renault/Dacia
- Improvement for Mercedes/Smart (VIN and System)
- Improve display of ECU name (OBD and Manufacturer)
2.48
2020-06-08
- Improvement engine data for Peugeot Citroen (available with klavkarr only)
- Improvement for VAG (Automatic gear box)
- Add system for Subaru (Stop Start Engine)
2.47
2020-05-27
- Improvement for Renault TCM
- Add data for Peugeot 207
2.46
2020-05-13
- Improvement for BMW (DS2 Protocol only with klavkarr)
- Add data for Opel (X25XE, X18XE, etc)
2.45
2020-04-29
- Fix an issue with Fiat / Alfa Romeo connection to Engine
2.44
2020-04-22
- Improvement for VAG (KW2089 Protocol)
- Improve connection with Volkswagen (Golf V)
- Add systems for Suzuki
- Improve connection with PSA (C2, C3, 106, Saxo, Partner)
2.43
2020-03-13
- Add fault code definitions (DF code for Renault, VAG codes)
- Improve connection with Mitsubishi model built before 2007
- Improve connection with PSA (107, C1)
2.42
2020-02-21
- Add KW2089 protocol for VAG
- Improvement for Land Rover (Defender TD5 available with klavkarr only)
- Improve connection with PSA (306/406 and Xsara model)
2.41
2020-01-17
- Solve an issue when connection to the the vehicle fail
- Improve connection with Renault vehicle before 2001 (klavkarr only)
- Add data for Renault (engine L7X, …)
- Improve connection with Peugeot (mainly with 206 model)
2.40
2020-01-09
- Improve reading of fault with VAG (KW1281 available only with klavkarr device)
- Add data for Saab
- Improve connection with Mercedes
2.39
2019-12-20
- Add data for Opel (engine Z19DT, Z17DTJ, Z10XEP, …)
- Add data for Renault (engine F4R, K4M, …)
- Improve connection with Peugeot (mainly with 307 model)
2.38
2019-12-05
- Add diagnosis data for Opel (moteur Z19DT, Z17DTJ, Z17DTH, …)
- Improve connection with Peugeot / Citroen
- Improve reading of DTC with VAG which support KW1281 protocol (klavkarr device only)
2.37
2019-11-29
- Improve Chart display for iPhone
- Improve connection with Opel and ELM327 device
- Improve connection with Nissan vehicule
- Add data for Opel (engine X12XE, X16XE, Y13DT, Z22XE)
- Add data for VIN decipher
2.36
2019-11-07
- Improve VIN decoder to add recent models
2.35
2019-10-30
- Add support for VAG TP 2.0 and TP 1.6 (klavkarr only)
- Fix an issue with ELM327 and ISO9141 protocol
- Add DTC definitions
- Improvement for Volvo
2.34
2019-10-03
- Minor fix for Dark Mode
- Fix an issue when replay a chart after a record
- Improve sharing of DTC
- Optimizations (reduce application size)
2.33
2019-09-28
- Support for iOS 13 and Dark Mode
- Add DTC definitions for BMW
2.32
2019-09-21
- Improve reading of fault for BMW
- Add Mercedes System
- Add DTC definitions
2.31
2019-08-30
- Improve connection for Porsche (Transmission)
- Improve connection for Volvo (Engine and Transmission)
- Add data for Renault/Dacia Engine
- Faster vehicule connection
- Minor design reviews
2.30
2019-07-30
- Add TP2.0 protocol for VAG (klavkarr only)
- Improvement and solve issue for Opel
- Improvement for Land Rover (Transmission)
- Improvement for Mitsubishi
2.29
2019-06-27
- Added KW1281 protocol for VAG (klavkarr only)
- Improvement for BMW
2.28
2019-04-25
- Fix issue with restoring license
2.27
2019-04-24
- Add diagnostic data for Opel
- Add diagnostic data for Renault and Dacia
2.26
2019-04-09
- Fix issue with DTC descriptions
2.25
2013-10-24
- Add TCM diagnostic data for Renault and Dacia
- Improve and solve issue with PSA for reading/clearing faults
- Improve connection with Ford from 1996 to 1999
- Improve reading of DTC for Opel
2.24
2019-02-21
- Add support for device working with Bluetooth 4.0
2.23
2019-02-02
- Solve connection issues
- Improvement for Mitsubishi
2.22
2019-01-31
- Improve connection to ECM / TCM of vehicle which use 2 different protocols
- Improve VIN / Engine code decoding for Renault / Dacia
- Improve connection with older Renault vehicle (klavkarr needed)
2.21
2018-12-20
- Improve connection to transmission ECU with Jeep/Chrysler/Dodge
- Better detection of OBD ECU name
2.20
2018-12-04
- Improve connection with transmission ECU (gearbox and transfert case)
- Improve vehicle connection speed and graphic reading speed
- Add diagnostic data for Ford
2.19
2018-09-29
- Improve connection to Subaru ECM
- Improve data read for Mitsubishi
- Add definitions for Renault/Dacia
- Add vehicle make (Abarth, Alpine, ...)
2.18
2018-08-17
- Improve sensor reading with Opel
- Improve connexion to transmission ECU for VAG and BMW
- Fix issue with « bad » ELM327 firmware
2.17
2018-08-01
- Trace until 4 banks in graphic mode
- Consult and share documents created with « Files » application
- Improve WiFi issues detection
- Improve connexion to transmission ECU for PSA and Renault
2.16
2018-06-27
- Improve connection with Mitsubishi vehicle
- Solve an issue with reading of oxygen sensors
- Add user guide in German
2.15
2018-05-17
- Improve TCM connection with Toyota and Ssangyong
- Improve Suzuki AWD connection
- Add DTC description
2.14
2018-03-08
- Solve issue with sensor list inside the graphic mode
- Add DTC description for Hyundai/Kia and Ford
2.13
2018-02-22
- Add share button for diagnosis and report
- Add a new screen to test electronic device
- Improve VIN decoder with latest model (2017/2018)
2.12
2018-01-04
- Add 2 icons to display the status of the connetion with the interface and vehicle
- Add the possibility to select ECU to diagnose
- Improvement of the design with iPad
2.11
2017-11-14
- Solve issue with « ELM KLAVKARR » screen
2.10
2017-11-10
- Adapt application for iPhone X display
- New sheet to select freeze frame
- Improve reading accuracy of battery voltage with KLAVKARR device
- Improve detection of the ECM for Jeep/Chrysler with CRD engine
- Improve behaviour of the application with faulty ELM327 firmware
2.09
2017-10-11
- Solve issue with in App Purchase
2.08
2017-08-31
- Add VIN decoder functionality
- Saving diagnostic data also record freeze frames
- Improve connection and DTC reading with Toyota/Lexus and Mitsubishi
- Solve issues with diagnosis reports
2.07
2017-07-20
- Add definitions for fault codes for Ford, Volkswagen/Audi
- Add definitions for new engine generation (Euro 6.2)
- Improve connection with Hyundai/Kia
2.06
2017-06-02
- Solve issue when reading DTC on Opel/Chevrolet vehicle
- Improve connection to TCM on Jepp
- Improve connection with light duty vehicle from VAG
- Improve reading of fault with Hyundai/Kia
2.05
2017-05-12
- Solve issue when erasing which may happens with vehicle before 2008
- Add DTC descriptions (now more than 9000 description are available)
- New splash screen
2.04
2017-03-08
- Improve compatibility with older vehicles (2002/2006)
- Solve issue with diagnostic report generation
2.03
2017-02-07
- Add support for klavkarr product (Bluetooth)
2.02
2017-01-12
- Improve erasing of fault with Peugeot/Citroen
- Improve Ford connection
2.01
2016-12-15
The “Premium Version” is now the “Basic Edition”. The features of Basic Edition are exactly the same as the Premium version. You still have access to the functions for which you paid.
We have added new features that are available in the “Plus Edition”:
- Ability to generate and print diagnostic reports
- Advanced graphical functions: reviewing data
- Additional performance tests
If you have lost access to the Basic Edition, simply restore the application by going into the “help” menu and “Unlock Basic/Plus functions”. In the top right is the “Restore” button .
2.00
2016-11-30
The "Premium version" is now the "Basic Edition". The functionnalities are exactly the same in the Basic Edition as they were in the Premium Version. You still have access to the functionnalities you paid for.
We added new functionnalities which are available in the "Plus Edition" :
+ Generate report of the diagnosis you can print and share with your customer
+ Advanced chart option, reload data
+ New performance test
If you lost the access to the Basic Edition go in the "Help" menu, then tap on "Unlock Basic/Plus Edition".
Tap on "restore" button at the top left of the purchase screen, you will not be charged and the Basic Edition access will be activated.