3.5.25
2021-07-17
- Resolved an issue where the app could crash when your system is in alarm.
3.5.13
2020-11-13
- Modified password reset flow to make Username optional.
- Resolved an issue that prevented the Glass Break LP from being enrolled via the app.
- Resolved a bug that resulted in the Security screen zones scrolling off-screen in a way that made them inaccessible.
- Resolved an issue that resulted in the temperature of zones displaying incorrectly at times (usually reading as 0).
- Improved camera online/offline detection slightly.
- Resolved a virtual keypad issue on iPad where rotating the screen would cause the lower rows of buttons to go off-screen.
- Added camera Privacy Mode support.
- Resolved an issue that allowed un-enrolled zones to show on the Home dashboard.
1.5.11
2020-09-14
- Fixed a bug that resulted in switches disappearing in the device settings screen as you scroll.
- Camera provisioning improvements.
- Added BAT Connect sensor reset option in the settings screen.
- Added an option to the Motion Detection Area / PIR screen to "Refresh" the data.
- Added in-app review prompts.
- Added smoke/fire trouble and smoke reset support.
- Added Z-Wave Unlock/Lock Trigger Events
- Added Z-Wave Optimize Network feature.
- The app should now switch to a panel in entry delay or alarm if the said panel isn't in view.
- Removed strength requirement on new passwords in the change password dialog.
- Fixed a bug that resulted in the crashing of the app when leaving the event log screen.
- Fixed a bug that resulted in the crashing of the app on legacy BATs using KeySwitch.
- Fixed an issue that resulted in the "Change Password" button not being clickable by sub-users.
- Added new camera firmware support.
- Fixed some crashes that could occur if the user leaves the app while on a Z-Wave device screen.
- Fixed an issue where the app would take a long time to log the user out upon launch if the user's password had been changed outside of the app itself (such as via AC).
- Fixed an issue that resulted in the user sometimes needing to press the login button more than once on the initial login screen.
1.5.10
2020-07-29
- Added groups to favorites.
- Added empty list buttons.
- Added showcase to demonstrate where to add things to empty lists for the first time.
- Added some improved security measures.
- Improved Z-Wave battery handling.
- Improved zone notification handling.
- Fixed some shared user permissions issues.
- Fixed a presentation issue involving the EULA and biometric use dialogs.
- Fixed a crash that can occur after granting the app permission to use the camera for QR Code scanning.
- Fixed a bug that resulted in a premature dismissal of the unregistering camera prompt.
- Fixed a crash that could occur due to how the validate on resume login screen and biometric alerts are presented.
- Improved camera un-registration process slightly.
- Fixed a bug with zones that support temperature data.
- Misc bug & crash fixes.
1.5.7
2020-06-09
- Added a change password feature.
- Added thermostat half-point stepping when the user is using metric.
- Fixed a thermostat value updating bug.
- Replaced the “No Favorites” label with a “Select Favorites” button on the dashboard.
- Added company contact phone number as well as phone and email click handling in the dealer info section.
- Fixed a bug that resulted in camera names changing back and forth between a friendly name and serial numbers.
- Improved camera QR processing.
- Slightly modified the VKP view so that it wouldn’t clip the bottom row of buttons on older iPhones.
- Other misc. bug fixes.
1.5.6
2020-05-12
- Added a change password feature.
- Added thermostat half-point stepping when the user is using metric.
- Fixed a thermostat value updating bug.
- Replaced the “No Favorites” label with a “Select Favorites” button on the dashboard.
- Added company contact phone number as well as phone and email click handling in the dealer info section.
- Fixed a bug that resulted in camera names changing back and forth between a friendly name and serial numbers.
- Improved camera QR processing.
- Slightly modified the VKP view so that it wouldn’t clip the bottom row of buttons on older iPhones.
- Other misc. bug fixes.
1.5.3
2020-03-24
New arming icon layout - revised to show only the actionable arming state
Added Biometric user access to app, supporting TouchID and FaceID
Phone rotation to landscape live view, orientation flipping of live view video feeds fully supported
Numerous improvements for video camera navigation, live capture, monitoring and messaging
Resolved network/camera provisioning errors, updated video library to expedite Camera WiFi configuration and registration, allow SSID auto-population with location permissions
Added Global Chime support for BAT Connect, expanded and improved Virtual Keypad support for Interlogix NetworX panels communicating through a BAT-Connect
Streamlined PIN code validation, added warning identifiers for users missing PIN codes
Improved Z-Wave thermostat fan control setting, revised demo mode for interacting with the demo thermostat
Adjusted an arming level action/trigger to the correct description, resolved a permission issue alert for user arming level authorization, and user permission assignments
Arming bar update in certain conditions to show disarm button during an exit delay period
Updated arming modifiers and arming bar icon color when the system is in alarm
Resolved an entry delay issue to show the disarm button on certain panels, allows user to disarm a panel before an alarm state
Defined a consistent scene name length to sync with hardware
Updated a heat sensor notification text in the zone configuration view
Resolved data and networking related stalls with panel users and cameras
Refined display for entry/exit delay, door window sensor handling, zone naming and event log content for the Connect-XT Communicator and Simon XT panels
Moved glass-break sensors into the Door/Window category
Updated Connect+ permissions view to better inform users of a PIN code requirement and save requirements
Improved invalid User Number NAK handling, changes to only observe and handle NAKs that originate from current client commands
Added event notification renewal at each launch
Updated settings text to be more universal vs. referencing a specific panel
Added motion arming icon where applicable
System troubles and trouble display improvements
Modified camera order - alphanumeric
Localization updates, other miscellaneous enhancements