@Home for Homematic

• New: WireGuard VPN support
• New: Sunblind (HmIP-HDM1)
• Bug fixed: Shortcuts in combination with IPSec VPN
• Bug fixed: Glitches on Apple Watch Ultra
• Bug fixed: Apple Watch complications were not displayed
• Bug fixed: IPSec connection setup could cause the app to crash

Added support for the following devices

• Homematic IP Smart Home Keypad HmIP-WKP
• Homematic IP Smart Home LED Controller – RGBW HmIP-RGBW


The following bugs have been fixed

• HmIP-DRBLI4: Values of current level and slat position were not displayed

Added support for the following devices:

• CCU3 Maintenance Channel with Duty Cycle and Carrier Sense
• HmIP Multi IO module board: analog inputs
• HmIP dimmer status channel
• HmIP switching actuator with signal light
• Homebrew Pressure sensor with shutter contact
• CUxD (91) CloudMatic


The following bugs have been fixed:

• Hidden system variables were still displayed in some cases
• Editing of lists was sometimes no longer possible (e.g. adding paragraphs)
• Placeholders in device names and data points are now replaced by the correct German or English translation.
• other errors that caused the app to crash

New year: Time to get rid of a few bugs.
The following issues have been fixed:

- IPSec VPN: password and secret could not be changed under certain conditions
- Widget: Subsequent changes of names were not automatically applied to the widget
- System log: Error in the display of system variables
- System variables were displayed twice under certain conditions
- Manual reordering caused a crash under certain conditions
- Rain sensor and door lock actuator: Icons were incorrectly colored in rare cases
- App may switched to restricted mode even though the user had admin privileges
- Apple Watch app crashed as soon as an empty list was selected

- Widget -

• Jump to your favorite views with one tap. In addition, the most recently received notifications are displayed.


- New devices -

• Homematic IP door lock sensor (HmIP-DLS)
• CUxD Universal Wrapper Device (90), Transform function.


- New in-app purchase -

• Remove ads from everyone who is part of your Apple ID family share.


- Other improvements -

• System variables with a channel association will be displayed as well. Affects the views Devices, Rooms, Functions, Favorites.


- Bugs fixed -

• Inconsistencies in time information as soon as time zone of CCU and iPhone/iPad differ from each other.
• Counter of service messages reacted partly delayed.
• HmIP blind actuator: 100% opening of the blind was not possible in some cases.
• View "All" for programs and variables could not be sorted.
• Data was not completely saved when closing the app in some cases.

2.5.1 and 2.5.2 do some Bugfixes only



New TOP feature in 2.5:

- Add paragraphs and headings to your individual views.
- Display status values for Philips Hue and Osram Lightify devices.


Other features and changes:

- View of alarm and service messages can be hidden
- CCU push messages: UTF special characters (like emojis) can be sent URL encoded. *)
- HmIP Smoke Detector: Control burglar alarm
- Temperature difference sensor: time of last change
- Thermostats: Booster and (subsequent) set temperature can be set simultaneously
- Note that connection to CloudMatic server is encrypted


Errors have been fixed:

- Heating group without wall thermostat showed 20% humidity
- External connections to CCUs with invalid SSL/TLS certificates were possible, despite other settings.
- Low battery warning was not displayed for some devices
- Philips Hue / Osram Lightify: could not be controlled via Apple Watch
- Philips Hue / Osram Lightify: white light temperature could not be controlled in some cases.

*) CCU push messages: The service logic on the CCU must be updated. To do this, deactivate CCU push messages in the app and reactivate them. Confirm that the "Service logic" is to be updated when asked.

New TOP feature:

- Add paragraphs and headings to your individual views.
- Display status values for Philips Hue and Osram Lightify devices.


Other features and changes:

- View of alarm and service messages can be hidden
- CCU push messages: UTF special characters (like emojis) can be sent URL encoded. *)
- HmIP Smoke Detector: Control burglar alarm
- Temperature difference sensor: time of last change
- Thermostats: Booster and (subsequent) set temperature can be set simultaneously
- Note that connection to CloudMatic server is encrypted


Errors have been fixed:

- Heating group without wall thermostat showed 20% humidity
- External connections to CCUs with invalid SSL/TLS certificates were possible, despite other settings.
- Low battery warning was not displayed for some devices
- Philips Hue / Osram Lightify: could not be controlled via Apple Watch
- Philips Hue / Osram Lightify: white light temperature could not be controlled in some cases.

*) CCU push messages: The service logic on the CCU must be updated. To do this, deactivate CCU push messages in the app and reactivate them. Confirm that the "Service logic" is to be updated when asked.

New TOP feature: Web view for system variables:

The value of a system variable can optionally be displayed in a web view.
This results in almost unlimit possibilities if a system variable contains HTML code:

- Formatted content such as text, tables, images
- Embedding of whole web pages e.g. via linking or iFrames (e.g. webcams, diagrams from Grafana)
- interactive content (JavaScript)

The web view is activated via the edt icon in the top right corner of the respective view.


Further additions and changes:

- Combination Signalling Device MP3 (HmIP-MP3P): volume can be adjusted.
- Radiator thermostats: Colored symbol signals valve open = red, valve closed: blue.
- Thermostats: Icon also reacts to touch gesture. Selection of modes and set temperature thus somewhat easier to reach.
- Display "last change" for temperature sensors and for dimmers
- Access protection: If the password consists only of digits, the numeric keypad is displayed for input.
- Incorrectly written user name "admin" is automatically corrected to "Admin". (Thus less support effort for the developer :-)
- More beeps for push messages: @HomeCensorBeep, @HomeComputerMagic, @HomeFrontDeskBells, @HomeServiceBell, @HomeSpookyWaterDrops, @HomeWaterChurning, @HomeWaterSplash.


Bugfixing:

- Under certain circumstances it happened that all channels/variables/programs of a view were hidden.
- Dimmer displayed wrong (+1 too high) value in rare cases
- Display of connection failure, low battery and warnings bounces
- Configuring Watch App

Bugfixing

Bugfixing

Bugfixing

Bugfixing

- Geofencing
- Support of iOS Dark Mode

Bugfixing

2.0.25: Bugfixing


New with 2.0.21

- View for the WebUI diagrams (iOS 13 only)
- HmIP-MOD-RC8 and HmIP-FCI: are displayed as door / window contact if they are configured accordingly
- HmIP Wired Blind Actuator: is displayed as a blind actuator ( i.e. no slat position) if it is configured accordingly
- Optimization for Siri Shortcuts, so that they can be reused more easily in the "Shortcuts" app
- Bugfix blind actuator: Setting of blind height and slat position
- Bugfix danger detector: virtual CUxD device is now correctly displayed in the Apple Watch App

2.0.25: Bugfixing


New with 2.0.21

- View for the WebUI diagrams (iOS 13 only)
- HmIP-MOD-RC8 and HmIP-FCI: are displayed as door / window contact if they are configured accordingly
- HmIP Wired Blind Actuator: is displayed as a blind actuator ( i.e. no slat position) if it is configured accordingly
- Optimization for Siri Shortcuts, so that they can be reused more easily in the "Shortcuts" app
- Bugfix blind actuator: Setting of blind height and slat position
- Bugfix danger detector: virtual CUxD device is now correctly displayed in the Apple Watch App

2.0.24: Bugfixing


New with 2.0.21

- View for the WebUI diagrams (iOS 13 only)
- HmIP-MOD-RC8 and HmIP-FCI: are displayed as door / window contact if they are configured accordingly
- HmIP Wired Blind Actuator: is displayed as a blind actuator ( i.e. no slat position) if it is configured accordingly
- Optimization for Siri Shortcuts, so that they can be reused more easily in the "Shortcuts" app
- Bugfix blind actuator: Setting of blind height and slat position
- Bugfix danger detector: virtual CUxD device is now correctly displayed in the Apple Watch App

2.0.23: Bugfixing


New with 2.0.21

- View for the WebUI diagrams (iOS 13 only)
- HmIP-MOD-RC8 and HmIP-FCI: are displayed as door / window contact if they are configured accordingly
- HmIP Wired Blind Actuator: is displayed as a blind actuator ( i.e. no slat position) if it is configured accordingly
- Optimization for Siri Shortcuts, so that they can be reused more easily in the "Shortcuts" app
- Bugfix blind actuator: Setting of blind height and slat position
- Bugfix danger detector: virtual CUxD device is now correctly displayed in the Apple Watch App

2.0.22: Bugfixing


New with 2.0.21

- View for the WebUI diagrams (iOS 13 only)
- HmIP-MOD-RC8 and HmIP-FCI: are displayed as door / window contact if they are configured accordingly
- HmIP Wired Blind Actuator: is displayed as a blind actuator ( i.e. no slat position) if it is configured accordingly
- Optimization for Siri Shortcuts, so that they can be reused more easily in the "Shortcuts" app
- Bugfix blind actuator: Setting of blind height and slat position
- Bugfix danger detector: virtual CUxD device is now correctly displayed in the Apple Watch App

- NEW: View for the WebUI diagrams

- HmIP-MOD-RC8 and HmIP-FCI: are displayed as door / window contact if they are configured accordingly
- HmIP Wired Blind Actuator: is displayed as a blind actuator ( i.e. no slat position) if it is configured accordingly
- Optimization for Siri Shortcuts, so that they can be reused more easily in the "Shortcuts" app
- Bugfix blind actuator: Setting of blind height and slat position
- Bugfix danger detector: virtual CUxD device is now correctly displayed in the Apple Watch App

This update makes @Home ready for the latest iPhones and iPads and the latest iOS version.

Additionally the CUxD danger detector is now supported and a bug in the watch app has been fixed.

Bugfixing

- Bugfixing: Siri shortcuts iCloud sync
- Bugfixing: Hide Service Messages for hidden devices

- Bugfixing: Siri Shortcuts with Englisch language
- Bugfixing: IP Presence Detector (HmIP-SPI)
- Add localization for unknown devices types

New since 2.0.14:

- Siri shortcuts
- Optimization: Key (short / long) is highlighted for 2 seconds after selection
- Optimization: When importing an encrypted configuration file, the passphrase is only asked for if a passphrase has been specified.
- Fixes a bug with HM-Sec-Sir-WM
- Fixes a bug in system log of variables

- Siri shortcuts
- Optimization: Key (short / long) is highlighted for 2 seconds after selection
- Optimization: When importing an encrypted configuration file, the passphrase is only asked for if a passphrase has been specified.

- Fixes a bug with HM-Sec-Sir-WM
- Fixes a bug in system log of variables
- Fix a rare problem in cases of sync with admin privileges

- Siri shortcuts

- Optimization: Key (short / long) is highlighted for 2 seconds after selection
- Optimization: When importing an encrypted configuration file, the passphrase is only asked for if a passphrase has been specified.

- Fixes a bug with HM-Sec-Sir-WM
- Fixes a bug in system log of variables

Bugfixing

Bugfixing

Bugfixing

Bugfixing

New in 2.0.9:

- System log: Change between single-line and multiline helps to read long values without losing the overview
- System log: Values of system variables (type alarm, logic value and value list) are written out.
- Bugfixing

2.0.7 & 2.0.8: Bugfixing


2.0.6:

Lists can be sorted alphabetically up and down. Individual sorting (as before) is still possible.

Added support for more devices:

HmIP-BRC2: Remote Control for brand switches
HmIP-DBB: Doorbell Button
HmIP-FALMOT: Floor Heating Actuator, motorized
HmIP-FCI*: Contact Interface
HmIP-KRC4: Key Ring Remote Control
HmIP-MOD-RC8: Module Board Transmitter
HmIP-MOD-TM: Tormatic
HmIP-RC4: Remote Control
HmIP-RCV-50: Virtual Remote Control
HmIP-WRCD: Wall-mount Remote Control

HmIPW-DRI*: Wired Input Module
HmIPW-FIO*: Wired IO Module

HM-SwI-3-FM: Switch interface

Lots of other invisible changes as a basis for future features: With this update large parts of program code have been rewritten, which are responsible for the display and operation of devices, programs and variables.

2.0.7: Bugfixing


2.0.6:

Lists can be sorted alphabetically up and down. Individual sorting (as before) is still possible.


Added support for more devices:

HmIP-BRC2: Remote Control for brand switches
HmIP-DBB: Doorbell Button
HmIP-FALMOT: Floor Heating Actuator, motorized
HmIP-FCI*: Contact Interface
HmIP-KRC4: Key Ring Remote Control
HmIP-MOD-RC8: Module Board Transmitter
HmIP-MOD-TM: Tormatic
HmIP-RC4: Remote Control
HmIP-RCV-50: Virtual Remote Control
HmIP-WRCD: Wall-mount Remote Control

HmIPW-DRI*: Wired Input Module
HmIPW-FIO*: Wired IO Module

HM-SwI-3-FM: Switch interface


Lots of other invisible changes as a basis for future features: With this update large parts of program code have been rewritten, which are responsible for the display and operation of devices, programs and variables.

Lists can be sorted alphabetically up and down. Individual sorting (as before) is still possible.



Added support for more devices:


HmIP-BRC2: Remote Control for brand switches
HmIP-DBB: Doorbell Button
HmIP-FALMOT: Floor Heating Actuator, motorized
HmIP-FCI*: Contact Interface
HmIP-KRC4: Key Ring Remote Control
HmIP-MOD-RC8: Module Board Transmitter
HmIP-MOD-TM: Tormatic
HmIP-RC4: Remote Control
HmIP-RCV-50: Virtual Remote Control
HmIP-WRCD: Wall-mount Remote Control

HmIPW-DRI*: Wired Input Module
HmIPW-FIO*: Wired IO Module

HM-SwI-3-FM: Switch interface



Lots of other invisible changes as a basis for future features: With this update large parts of program code have been rewritten, which are responsible for the display and operation of devices, programs and variables.

- FaceID starts immediately, no prior confirmation required
- Adds missing localization of device types and service messages
- Fixes some bugs



2.0.3 Feature Release
--------------------------
- Badge for the number of current alarm and service messages can be shown or hidden (Settings / Graphical User Interface)
- New central symbol (CCU3). Optionally, the old icon (CCU2) can also be selected (Settings / Graphical User Interface).
- Language can be changed independently of the iOS system language to German or English (Settings / Graphical User Interface)
- Sound of a CCU push notificationwill be played even if the app is active. Can be disabled (Settings / CCU Push Notifications)
- Thermostat: If the auto mode is activated, the current target temperature is preselected in the picker.
- Help view: References to Facebook Group and Homematic Forum
- Watch App: Complications can be configured via iOS App "Watch"

2.0.4 ------------ - Fixe Crash with iOS 9 2.0.3 ------------ - Badge for the number of current alarm and service messages can be shown or hidden (Settings / Graphical User Interface) - New central symbol (CCU3). Optionally, the old icon (CCU2) can also be selected (Settings / Graphical User Interface). - Language can be changed independently of the iOS system language to German or English (Settings / Graphical User Interface) - Sound of a CCU push notificationwill be played even if the app is active. Can be disabled (Settings / CCU Push Notifications) - Thermostat: If the auto mode is activated, the current target temperature is preselected in the picker. - Help view: References to Facebook Group and Homematic Forum - Watch App: Complications can be configured via iOS App "Watch"