+++++++++++++++++++++++++++++++++ Dear customer, from now on the „IPCam“ app is free of charge! +++++++++++++++++++++++++++++++++
Important: IPCam app requires latest firmware version installed on your network camera. Please ensure to have latest firmware revisions intalled.
IPCam enables you to access live images of ABUS Security-Center network cameras on your device. Take the advantage of the impressive range of additional options offered by this app to control most important camera functions directly via IPCam: - Control pre-defined preset positions of your Pan/Tilt network camera - Start and stop guard tours - Manual control for relays outputs and detection of alarm inputs - Quick access to day/night settings to apply optimal image settings - MPEG-4 / H.264 streaming support for lower bandwidth usage - Integration of up to 12 network cameras (iPAD 18) - Easy swipe navigation to check camera images in single- and multiview - Sequential export of up to 5 snapshots stored on your device - Support for landscape mode in single view - Support for German, English, French, Dutch, Danish, Polish and Russian OSD language - Universal App for iPhone and iPad
An intensive usage of video streaming function will cause higher battery usage and may heat up your device. Please note that you generate additional costs when using remote connections, depending of your providers contract. The video performance is related to the available transmission bandwidth.
IPCam (English) 2.7.1 Update
2015-05-13
Important changes in Version 2.7.1: • Bugfix: App Startup Tablet
Important changes in Version 2.7: • Added support for new camera models (only HTTP mode supported / JPEG mode): TVIP91100, TVIP91300, TVIP91600, TVIP91700, TVIP92100, TVIP92300, TVIP92500, TVIP92600, TVIP92610, TVIP92700 • iOS8 support
AppPure.com and the download link of this app are 100% safe. The download link of this app will be redirected to the official App Store site, thus the app is original and has not been modified in any way.
Important changes in Version 2.7.1: • Bugfix: App Startup Tablet
Important changes in Version 2.7: • Added support for new camera models (only HTTP mode supported / JPEG mode): TVIP91100, TVIP91300, TVIP91600, TVIP91700, TVIP92100, TVIP92300, TVIP92500, TVIP92600, TVIP92610, TVIP92700 • iOS8 support
2.7
2015-05-08
• Added support for new camera models (only HTTP mode supported / JPEG mode): TVIP91100, TVIP91300, TVIP91600, TVIP91700, TVIP92100, TVIP92300, TVIP92500, TVIP92600, TVIP92610, TVIP92700
• iOS8 support
2.6
2014-10-17
• Added support for new camera models: TVIP11560, TVIP61550 • JPEG-stream stability improved
2.5
2014-02-07
• Added support for new camera models: TVIP41500, TVIP61500, TVIP52502, TVIP62500 • Russian language support
2.4
2013-06-13
• Maximum camera support increased from 12 to 16 on iPhone devices
• Support for new network cameras added:
✓ TVIP81000, TVIP81100
✓ TVIP82000, TVIP82100
IMPORTANT: All configuration data of installed IP cameras will saved by applying this update. The lost configuration data by updating from version 2.0.1 to 2.1.0 will be restored. No duplicates will be created during the import.
- Configuration of all IP cameras will be saved during the update - Password prompt during app start can be disabled - Following ABUS IP cameras are now supported: TVIP31501, TVIP31551 TVIP71501, TVIP71551 TVIP70000, TVIP72000 - Stability improvements during setup
2.1.0
2012-04-12
- Compatibility mode re-named to HTTP mode - Stability for live streaming over RTSP improved (deactivated HTTP mode) - IPCam no longer use/change stream resolutions (Stream1, MPEG-4 or H.264) which are used for recording with VMS or TVVR recorders - TVIP10xxx and TVIP20xxx now use 3GP stream when HTTP mode is deactivated - TVIP11xxx and TVIP21xxx now use 3GP stream when HTTP mode is deactivated - TVIP31xxx and TVIP71xxx now use 3GP stream when HTTP mode is deactivated - TVIP62000 now use mobile MPGEG-4 stream (320x240) when HTTP mode is deactivated - The default resolution setting when adding new cameras in IPCam will set to high - Download of video clips from SD-Card storage can be cancelled - App language Polish integrated - App-Crash analysis tool integrated
2.0.1
2012-01-09
!!! Caution: All APP settings will be rest to default when updating from IPCam 1.0 to IPCam 2.0.1. Please note the camera settings before applying the update!!!
- Solved issues with non working in-app-purchase - Firmware check for network camera can be skipped
2.0.0
2011-12-01
!!! Caution: All APP settings will be rest to default when updating to IPCam 2.0. 0. Please note the camera settings before applying the update!!!
!!!Caution: IPCam app requires latest firmware version installed on your network camera. Please ensure to have latest firmware revisions intalled.
- Control pre-defined preset positions of your Pan/Tilt network camera - Start and stop guard tours - Manual control for relays outputs and detection of alarm inputs - Quick access to day/night settings to apply optimal image settings - View recorded single JPG or video data on internal SD card via in-app-purchase - MPEG-4 streaming support for lower bandwidth usage - Sequential export of up to 5 snapshots stored on your device - Support for German, English, French, Dutch and Danish OSD language - Universal App for iPhone and iPad Additional camera Support for: - TV7203-A, TV7204-A (Single-Stream Version) - TV7214, TV7215, TV7216, TV7217 - TV7230-A, TV7240-A (Single-Stream Version) - TVIP11501, TVIP11551 - TVIP21501, TVIP21551 - TVIP21501, TVIP21551 - TVIP62000