Jetting for Rotax Max EVO Kart
All categories and years
¥900Best Deal Ever
2.2.1for iPhone, iPad and more
Age Rating
Jetting for Rotax Max EVO Kart スクリーンショット
About Jetting for Rotax Max EVO Kart
This app provides, using weather conditions and your engine configuration, a recommendation about jetting and spark plug to use for karts with Rotax Max EVO (Senior, Minimax, Micromax, Supermax, DD2 or Junior), which use a Dellorto VHSB 34 XS carb.
In order to get the weather values, the application can use the GPS to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station. Nevertheless, the application can run without GPS and internet connection, in this case, the user has to give the weather data.
The application is made up of four tabs that are described next:
- Results: in this tab, the recommended main jet, needle position, air density and spark plug type values are shown. This data are calculated depending on the weather conditions and the engine configuration given in the next tabs. In addition, this tab lets to make a fine tuning adjustment to adapt to a concrete engine.
- Weather: you can set the values for current temperature, altitude, pressure and humidity. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest public weather station (from the GPS tab).
- Engine: you can set in this screen the information about your engine, carburator and track, that is, the engine type (Micromax, Minimax, Senior, Supermax, Junior or DD2), the model year of the engine, the spark plug brand used, the needle type, the float/pilot jet combo, the floats height, venturi, oil mix ratio, airbox type (new or old model) and the track type.
- GPS: this tab allows to use the GPS to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).
The application works with different measure units: inHg, mb, mmHg, hPa, atm for pressure, ºC and ºF for temperature.
The app is NOT VALID for Rotax Max engines before 2015. For these engines, you should install Jetting Max Kart.
In order to get the weather values, the application can use the GPS to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station. Nevertheless, the application can run without GPS and internet connection, in this case, the user has to give the weather data.
The application is made up of four tabs that are described next:
- Results: in this tab, the recommended main jet, needle position, air density and spark plug type values are shown. This data are calculated depending on the weather conditions and the engine configuration given in the next tabs. In addition, this tab lets to make a fine tuning adjustment to adapt to a concrete engine.
- Weather: you can set the values for current temperature, altitude, pressure and humidity. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest public weather station (from the GPS tab).
- Engine: you can set in this screen the information about your engine, carburator and track, that is, the engine type (Micromax, Minimax, Senior, Supermax, Junior or DD2), the model year of the engine, the spark plug brand used, the needle type, the float/pilot jet combo, the floats height, venturi, oil mix ratio, airbox type (new or old model) and the track type.
- GPS: this tab allows to use the GPS to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).
The application works with different measure units: inHg, mb, mmHg, hPa, atm for pressure, ºC and ºF for temperature.
The app is NOT VALID for Rotax Max engines before 2015. For these engines, you should install Jetting Max Kart.
Show More
最新バージョン 2.2.1 の更新情報
Last updated on 2024年02月29日
旧バージョン
Small adjustment in the calculation model of micro and mini engines after testing on the dynamometer.
Engines updated until 2024.
Engines updated until 2024.
Show More
Version History
2.2.1
2024年02月29日
Small adjustment in the calculation model of micro and mini engines after testing on the dynamometer.
Engines updated until 2024.
Engines updated until 2024.
2.2
2023年10月15日
Small adjustment in the calculation model of micro and mini engines after testing on the dynamometer.
Engines updated until 2024.
Engines updated until 2024.
2.1
2020年12月18日
Updated with 2020 engines.
The model is adjusted a bit to adapt it to the changes that occur every year in cylinders, etc.
Solves bug in dark mode.
Fixes some minor user interface bugs.
The model is adjusted a bit to adapt it to the changes that occur every year in cylinders, etc.
Solves bug in dark mode.
Fixes some minor user interface bugs.
2.0.3
2020年04月04日
Updated with 2020 engines.
The model is adjusted a bit to adapt it to the changes that occur every year in cylinders, etc.
Solves bug in dark mode.
Fixes some minor user interface bugs.
The model is adjusted a bit to adapt it to the changes that occur every year in cylinders, etc.
Solves bug in dark mode.
Fixes some minor user interface bugs.
2.0.2
2020年04月03日
Updated with 2020 engines.
The model is adjusted a bit to adapt it to the changes that occur every year in cylinders, etc.
Solves bug in dark mode.
Fixes some minor user interface bugs.
The model is adjusted a bit to adapt it to the changes that occur every year in cylinders, etc.
Solves bug in dark mode.
Fixes some minor user interface bugs.
2.0.1
2020年03月04日
Updated with 2020 engines.
The model is adjusted a bit to adapt it to the changes that occur every year in cylinders, etc.
Solves bug in dark mode.
The model is adjusted a bit to adapt it to the changes that occur every year in cylinders, etc.
Solves bug in dark mode.
2.0
2020年03月03日
Updated with 2020 engines.
The model is adjusted a bit to adapt it to the changes that occur every year in cylinders, etc.
The model is adjusted a bit to adapt it to the changes that occur every year in cylinders, etc.
1.4.2
2019年02月04日
Adapts the screen to iphone X, XR and XS.
1.4.1
2016年09月29日
Minor changes like literals or metadata.
1.4
2016年04月24日
Minor changes in user interface.
1.3
2016年04月19日
Improved service for obtaining weather information.
Minor changes in user interface.
Minor changes in user interface.
1.2.1
2015年10月22日
Fixed display bug and network access error in iOS9.
1.2
2015年08月06日
Fixed issue in GPS functionality.
1.1
2015年07月04日
Modifications in calculation model for Micromax and Minimax.
1.0
2015年06月22日
Jetting for Rotax Max EVO Kart 価格
今日:
¥900
最低価格:
¥900
最高価格:
¥1,000
Jetting for Rotax Max EVO Kart FAQ
ここをクリック!地理的に制限されているアプリのダウンロード方法をご参考ください。
次のリストをチェックして、Jetting for Rotax Max EVO Kartの最低システム要件をご確認ください。
iPhone
iOS 11.1以降が必要です。
iPad
iPadOS 11.1以降が必要です。
iPod touch
iOS 11.1以降が必要です。
Jetting for Rotax Max EVO Kartは次の言語がサポートされています。 日本語, アラビア語, イタリア語, インドネシア語, ウクライナ語, オランダ語, ギリシャ語, スウェーデン語, スペイン語, スロバキア語, タイ語, チェコ語, デンマーク語, トルコ語, ドイツ語, ノルウェー語 (ブークモール), ハンガリー語, フィンランド語, フランス語, ヘブライ, ベトナム語, ポルトガル語, ポーランド語, マレー語, ルーマニア語, ロシア語, 簡体字中国語, 繁体字中国語, 英語, 韓国語