Light Project
Free
3.9.12for iPhone, iPod touch
Age Rating
Light Project Screenshots
About Light Project
This is an App with special firmware of BLE led lighting. User can use this App to upgrade lighting and set Max brightness.
Show More
What's New in the Latest Version 3.9.12
Last updated on Oct 21, 2019
Old Versions
The linkage mechanism is revised as following:
1. The linkage priority is higher than T2 (2nd Time Delay), so the linkage can be entered in the T2 state; the linkage doesn’t work during the T2 state in the previous versions2. Now the T2 state is no longer the state of absolute brightness, and is also controlled by the ambient lighting. T2 state in the previous version is not affected by the ambient lighting.
3. To set the linkage, the ratio corresponding to the T1 illuminance is defined, and only the ratio value is recorded without changing the brightness. In the previous versions, the brightness of the fixture will be changed. Now, since it has been changed to illuminance, the brightness of the fixture is no longer adjusted (changed to the scroll design). The latest firmware will work in the latest APP. The latest APP is compatible with the previous firmware.
4. Previously “Dim to %” is the percentage of the current brightness and is now changed to the percentage of T1 illuminance.
Others:
1.ON and AUTO merge
2.Add “Parameter Setting” function: PWM frequency adjustable, Top trim, Bottom trim, Min Auto light, Fade time, etc
3. The brightness of the fixture before the Buildnumber190606 is not uniform after power on. From 190606, after the fixture is powered on, it outputs 100% brightness, and the sensor still works. If the ambient light changes subsequently, the brightness of the lamp changes accordingly.
1. The linkage priority is higher than T2 (2nd Time Delay), so the linkage can be entered in the T2 state; the linkage doesn’t work during the T2 state in the previous versions2. Now the T2 state is no longer the state of absolute brightness, and is also controlled by the ambient lighting. T2 state in the previous version is not affected by the ambient lighting.
3. To set the linkage, the ratio corresponding to the T1 illuminance is defined, and only the ratio value is recorded without changing the brightness. In the previous versions, the brightness of the fixture will be changed. Now, since it has been changed to illuminance, the brightness of the fixture is no longer adjusted (changed to the scroll design). The latest firmware will work in the latest APP. The latest APP is compatible with the previous firmware.
4. Previously “Dim to %” is the percentage of the current brightness and is now changed to the percentage of T1 illuminance.
Others:
1.ON and AUTO merge
2.Add “Parameter Setting” function: PWM frequency adjustable, Top trim, Bottom trim, Min Auto light, Fade time, etc
3. The brightness of the fixture before the Buildnumber190606 is not uniform after power on. From 190606, after the fixture is powered on, it outputs 100% brightness, and the sensor still works. If the ambient light changes subsequently, the brightness of the lamp changes accordingly.
Show More
Version History
3.9.12
Oct 21, 2019
The linkage mechanism is revised as following:
1. The linkage priority is higher than T2 (2nd Time Delay), so the linkage can be entered in the T2 state; the linkage doesn’t work during the T2 state in the previous versions2. Now the T2 state is no longer the state of absolute brightness, and is also controlled by the ambient lighting. T2 state in the previous version is not affected by the ambient lighting.
3. To set the linkage, the ratio corresponding to the T1 illuminance is defined, and only the ratio value is recorded without changing the brightness. In the previous versions, the brightness of the fixture will be changed. Now, since it has been changed to illuminance, the brightness of the fixture is no longer adjusted (changed to the scroll design). The latest firmware will work in the latest APP. The latest APP is compatible with the previous firmware.
4. Previously “Dim to %” is the percentage of the current brightness and is now changed to the percentage of T1 illuminance.
Others:
1.ON and AUTO merge
2.Add “Parameter Setting” function: PWM frequency adjustable, Top trim, Bottom trim, Min Auto light, Fade time, etc
3. The brightness of the fixture before the Buildnumber190606 is not uniform after power on. From 190606, after the fixture is powered on, it outputs 100% brightness, and the sensor still works. If the ambient light changes subsequently, the brightness of the lamp changes accordingly.
1. The linkage priority is higher than T2 (2nd Time Delay), so the linkage can be entered in the T2 state; the linkage doesn’t work during the T2 state in the previous versions2. Now the T2 state is no longer the state of absolute brightness, and is also controlled by the ambient lighting. T2 state in the previous version is not affected by the ambient lighting.
3. To set the linkage, the ratio corresponding to the T1 illuminance is defined, and only the ratio value is recorded without changing the brightness. In the previous versions, the brightness of the fixture will be changed. Now, since it has been changed to illuminance, the brightness of the fixture is no longer adjusted (changed to the scroll design). The latest firmware will work in the latest APP. The latest APP is compatible with the previous firmware.
4. Previously “Dim to %” is the percentage of the current brightness and is now changed to the percentage of T1 illuminance.
Others:
1.ON and AUTO merge
2.Add “Parameter Setting” function: PWM frequency adjustable, Top trim, Bottom trim, Min Auto light, Fade time, etc
3. The brightness of the fixture before the Buildnumber190606 is not uniform after power on. From 190606, after the fixture is powered on, it outputs 100% brightness, and the sensor still works. If the ambient light changes subsequently, the brightness of the lamp changes accordingly.
3.1.11
Oct 18, 2019
The linkage mechanism is revised as following:
1. The linkage priority is higher than T2 (2nd Time Delay), so the linkage can be entered in the T2 state; the linkage doesn’t work during the T2 state in the previous versions2. Now the T2 state is no longer the state of absolute brightness, and is also controlled by the ambient lighting. T2 state in the previous version is not affected by the ambient lighting.
3. To set the linkage, the ratio corresponding to the T1 illuminance is defined, and only the ratio value is recorded without changing the brightness. In the previous versions, the brightness of the fixture will be changed. Now, since it has been changed to illuminance, the brightness of the fixture is no longer adjusted (changed to the scroll design). The latest firmware will work in the latest APP. The latest APP is compatible with the previous firmware.
4. Previously “Dim to %” is the percentage of the current brightness and is now changed to the percentage of T1 illuminance.
Others:
1.ON and AUTO merge
2.Add “Parameter Setting” function: PWM frequency adjustable, Top trim, Bottom trim, Min Auto light, Fade time, etc
3. The brightness of the fixture before the Buildnumber190606 is not uniform after power on. From 190606, after the fixture is powered on, it outputs 100% brightness, and the sensor still works. If the ambient light changes subsequently, the brightness of the lamp changes accordingly.
1. The linkage priority is higher than T2 (2nd Time Delay), so the linkage can be entered in the T2 state; the linkage doesn’t work during the T2 state in the previous versions2. Now the T2 state is no longer the state of absolute brightness, and is also controlled by the ambient lighting. T2 state in the previous version is not affected by the ambient lighting.
3. To set the linkage, the ratio corresponding to the T1 illuminance is defined, and only the ratio value is recorded without changing the brightness. In the previous versions, the brightness of the fixture will be changed. Now, since it has been changed to illuminance, the brightness of the fixture is no longer adjusted (changed to the scroll design). The latest firmware will work in the latest APP. The latest APP is compatible with the previous firmware.
4. Previously “Dim to %” is the percentage of the current brightness and is now changed to the percentage of T1 illuminance.
Others:
1.ON and AUTO merge
2.Add “Parameter Setting” function: PWM frequency adjustable, Top trim, Bottom trim, Min Auto light, Fade time, etc
3. The brightness of the fixture before the Buildnumber190606 is not uniform after power on. From 190606, after the fixture is powered on, it outputs 100% brightness, and the sensor still works. If the ambient light changes subsequently, the brightness of the lamp changes accordingly.
3.1.10
Sep 10, 2019
Firmware build number 190704.
Light version 3.1.9
Light version 3.1.9
2.3
Jan 28, 2019
Firmware build number 181224.
Light version 3.1.8
Light version 3.1.8
2.0
Dec 29, 2018
1. New firmware for light.
2. Performance improvement.
2. Performance improvement.
1.0
Sep 3, 2018
Light Project FAQ
Click here to learn how to download Light Project in restricted country or region.
Check the following list to see the minimum requirements of Light Project.
iPhone
Requires iOS 8.0 or later.
iPod touch
Requires iOS 8.0 or later.
Light Project supports English, Portuguese, Simplified Chinese, Traditional Chinese