Apps » Medical » LiNX Access

LiNX Access

2023.1.0 for iPhone, iPad
Free
0

0 Ratings

Update Date

2023-07-20

Size

31.8 MB

Screenshots for iPhone

iPhone
LiNX Access Description
Configuration and Diagnostics Tool for the LiNX Wheelchair System

INTENDED USE

Use the LiNX Access iOS tool on your iPad, iPod touch or iPhone in combination with an authorised LiNX Access Key to configure wheelchair performance parameters for the Dynamic Controls LiNX wheelchair control system.

Key features for Authorised Users
Wireless connectivity creates an entirely new experience as you can easily interact with the wheelchair as it moves around.
Graphical programming that provides an intuitive interface for programming wheelchair performance with touch and drag control points
Live Diagnostics provides real time graph data for key wheelchair performance such as joystick demand, motor current and battery status
Live Edit enables wheelchair performance configuration changes to instantly write to the wheelchair* so you can rapidly create the ride experience you want.
Wheelchair diagnostic information is updated instantly to the LiNX Access iOS tool as errors occur or are resolved.
Pair once with your LiNX Access Key and then use this to quickly connect to any LiNX system via the XLR port.
LiNX Access iOS wheelchair configuration files (.lci) are also compatible with the LiNX Access PC tool.

Authorised users are Original Equipment Manufacturers (OEMs) and their approved Distribution channels (Dealers/Providers, Therapists and Wheelchair Service Technicians). Non-authorised users can use the tool to read wheelchair configuration and diagnostic information from a stored file through the default access level.

Access Levels
Default = the ability to receive a LiNX wheelchair file via email, or other file exchange methods, to view read-only Distributor level configuration and diagnostics information.
Distributor = the ability to connect to a LiNX wheelchair system via a distributor level LiNX Access Key (DLX-HKEY01-A) to read and configure basic wheelchair performance parameters.
Manufacturer = the ability to connect to a LiNX wheelchair system via a manufacturer level LiNX Access Key (DLX-HKEY02-A) to read and configure high level wheelchair performance parameters.

WARNINGS

Read the LiNX Access User Manual as well as Installation Manual(s) of the System / Controller / Module as applicable before configuring a controller.

Performance adjustments should only be made by healthcare professionals, or by persons who completely understand the parameter settings, the adjustment process, the configuration of the vehicle, and the capabilities of the driver. Inappropriate settings can make the vehicle uncontrollable or unstable. An uncontrollable or unstable vehicle can cause an unsafe situation such as a crash, with the risk of serious injury to the driver or bystanders, or damage to the vehicle or surrounding property.

It is possible to set the configuration tools to write each parameter change instantly to a wheelchair without cycling power. When using the ‘Live Edit’ mode, users should be aware that the performance of the wheelchair will be instantly changed.

* Note: Safety critical configuration parameters are excluded from the Live Edit function.
LiNX Access 2023.1.0 Update
2023-07-20
This version supports firmware release MR7.0 and it remains compatible with all previous LiNX firmware.

New Features
· Support MR7.0 firmware and .lci files.
· Support for LiNX Memory Positions
· Support for OEM firmware and configuration file version control
· Support for Add and Remove of motions, positions, angle sources, trigger angles, and select modules
· Support for Live Diagnostics actuator channels and control inputs (requires iOS16 and above)
· Check for oversized configurations
· Updated function icons
· Updated iOS minimum version to iOS 15

Fixes
· Fixed issue where angle sensor chart resizes incorrectly when the screen is rotated on an iPad
More Information
Price:
Free
Version:
2023.1.0
Size:
31.8 MB
Genre:
Medical Utilities
Update Date:
2023-07-20
Developer:
Dynamic Controls
Language:
Chinese English French German Italian Spanish
You May Also Like
Happy Doctor : Hospital Game WEFUN STUDIO COMPANY LIMITED
HEARING AID APP:PETRALEX 4 EAR Pavle Kirkhanidi
Medscape WebMD
HiMommy - Pregnancy & Baby App Idea Accelerator
Farmatodo Col Farmatodo C.A.
Leafly: Find Weed Near You Leafly
NYSORA Vet App NYSORA inc.
Heart Rate Health: Pulse Mate Sergey Mosin
NCLEX PN Mastery Prep - 2024 Higher Learning Technologies
NCLEX RN Mastery Prep - 2024 Higher Learning Technologies
DOC24 Portal Salud SA
Blood Pressure & Heart Tracker Custom Arts
Developer Apps
Piccolo O₂ Medical
MyLiNX Medical
iPortal Dashboard Lifestyle

Safe to Download

AppPure.com and the download link of this app are 100% safe. The download link of this app will be redirected to the official App Store site, thus the app is original and has not been modified in any way.

Got it
X
Share

Share this page with your friends if you find it useful

Facebook Linkedin Pinterest Tumblr Twitter Whatsapp Line
2023.1.0 2023-07-20
This version supports firmware release MR7.0 and it remains compatible with all previous LiNX firmware.

New Features
· Support MR7.0 firmware and .lci files.
· Support for LiNX Memory Positions
· Support for OEM firmware and configuration file version control
· Support for Add and Remove of motions, positions, angle sources, trigger angles, and select modules
· Support for Live Diagnostics actuator channels and control inputs (requires iOS16 and above)
· Check for oversized configurations
· Updated function icons
· Updated iOS minimum version to iOS 15

Fixes
· Fixed issue where angle sensor chart resizes incorrectly when the screen is rotated on an iPad
2022.1.0 2023-01-20
This version supports firmware MR6.3 and it remains compatible with all previous LiNX firmware.

Fixes:
- Fix for an issue where oversized configurations could be written to a system.
- Fix for an issue where last modified timestamp shown for modified file does not get updated in file selection screen.
2021.2.1 2022-02-22
This version remains compatible with all LiNX firmware up to and including version 6.2.

Fixes:
- Resolved issue where buttons on the function card dialog were not visible in light mode.
2021.2.0 2021-12-15
This version remains compatible with all LiNX firmware up to and including version 6.2.

New features
- Improved event log reporting. The event log now displays event-specific data that makes it easier to locate the cause of errors within the LiNX system.

Fixes
- The LiNX Access iOS tool now shows banner values when using the graphical programming.
- Missing translations have been added.
2021.1.0 2021-07-01
This version remains compatible with all LiNX firmware up to and including version 6.1.

Significant speed increase when reading parameters from a system.
- This requires you to upgrade your LAK, which you will be prompted to do on first connection.

Trigger Angle headers are correctly translated.

Automatically generated names are now shown in the current language of the tool, not the language when they were generated.

Fixed a potential crash when refreshing the Firmware Upgrade screen.
6.1 2021-01-13
Conditional Control I/O
- Configure rules to activate only under certain conditions
- Enables a single input or trigger angle to be used for different tasks in different contexts

Joystick Shaping
- Calibrate a joystick to have a different range in each direction

Unlock into Bulk Mode directly from the menu rather than under a parameter

Support for the latest LiNX system features
- Audible Cues
- Grid Navigation
- Rest
- Standby Select
- Proportional Head Array

Small performance improvements and bug fixes
6.0.1 2020-04-29
Improvements:
- Fix to address an intermittent upgrade problem in the IAP related to compressed firmware
- Fix for incorrectly showing the blue bar for active function
- Fix for an issue while loading off screen that resulted in application crash
6.0 2020-02-27
New features:
- Support for MR6 lci files
- Support for the new TILT module
- Support for the new IN200 module
- Support for speedometer and odometer
- Changes to IN500 DB9 connector inputs(1-4) to allow them to be used as digital control input
- Performance improvements
5.3 2019-10-31
New Features:
• Styling and colour changes related to iOS 13
• Support for ALC calibration with an enhanced algorithm implemented in MR6.0 power module firmware
• Updated translations for all languages
• Removal of Chair Setup menu level to reduce number of menu levels

The following issues have been resolved:
• File sharing on iOS 13 not working
• Incorrect jack socket port descriptions on REM500

Other updates:
• Improved diagnostic text in the error log
5.2.1 2019-07-31
Update to translations for French, German and Italian based on feedback
5.2 2019-05-30
This version adds the ability to configure buddy buttons and switches for the client, as well as the multi-function buttons (on REM400/500) and toggles switches (on REM400).
These switches can be configured to
- provide direct access to seating operation
- provide mouse clicks and buttons for switch control
- control navigation through the chair menus and functions
- entry and exit of the set up menu or menu navigation
- control other activities such as speed control, lighting and horn
This version reduces the time to write configuration changes to the system.
Italian language support is now included.
5.1.1 2018-10-12
Support for LiNX Market Release 5.1.10 systems
5.1 2018-08-20
LiNX Access iOS version 5.1 includes the following new features:
- Support for the LiNX output module has been added.
- Support for REM400 toggles has been added.
- Profile and function editing restrictions are displayed in the tools.
- The program file version is displayed in the tools.
- The ability to write bundle files has been added.
- Version 4.x program files can be converted to MR5.1 versions.
- The capability and flexibility of the utility card has been expanded to support the output modules.
- Additional seating icons have been added to seating motions.
- Support for new battery/energy saving modes in power wheelchair.
- Updates to latest translations.
- General speed up and improvements when loading a configuration.
4.3 2018-01-29
- Speed up file load and save.
- Added support for Switch Control functions
- Added support for working with systems running MR4.3
4.2 2017-08-11
- Implemented the display of function keys in the system summary
- Application version is now visible without having to open a file or a connection
- MyLiNX conversion no longer automatically offered when you connect to a wheelchair
- MyLiNX conversion can now be manually triggered
- Added support for Utility functions
- Added support for ASL and IDC modules
- Changed the valid range of the maximum deceleration parameters
- Help text is now shown for parameters in seating user functions
- Latched Drive is now available with all input modes
4.1 2017-06-06
LiNX Access iOS MR4.1 tool application is an update to version 3.3 and includes the following improvements and new features:
- Added support for future MR4 program files (available later in 2017).
- The user interface for the profiles and functions has been improved. Each function now shows an icon on the main screen which indicates whether it is a drive or seating function. In the case of drive functions, the icon looks like a speed setting and shows you the maximum speed for the drive function. In the case of a seating function the icon looks like the seating motion which it controls
- Profiles and functions that are not available because they are either disabled or are inoperable are displayed in a lighter format colour from normal
- Some Control I/O parameters which were previously visible have been hidden.
3.3 2017-03-08
LiNX Access version 3.3 is an update to version 3.2 and includes the following new features:
- Added support for MR3.3 program files. These are required to enable the new MyLiNX product.
- Added the ability to convert MR3.0 and 3.1 to MR3.3 program files when connected to a system.
- Added the ability to convert MR3.0 and 3.1 to MR3.3 program files when NOT connected to a system.
- Translations have been added for Spanish.
- LiNX Access Key (LAK) firmware is now bundled with the application , therefore LAK upgrades are possible without connecting to the internet.
- Native support for iPad has been added.
- Updated error and recovery alerts during connection for better clarity and ease of use.
3.2 2016-09-21
LiNX Access iOS Application version 3.2.0 contains a number of enhancements and improvements:
- Names can be added to Drive Functions, Seating Functions, and Motions
- Seating Functions and Motions have default names that are generated from their content
- The motions screen now shows an icon for the motion based on its movement type
- Motion type icon is visible in seating function
- Translation have been updated for German, French, Simplified Chinese, and Tradition Chinese
3.1 2016-07-08
LiNX Access iOS Application version 3.1.0 contains a number of enhancements and improvements:
- Home screen redesigned with direct access to System Summary and Event logs
- Read/Write buttons added to bulk edit mode
- New styling of chair logs and statistics
- ‘Save as’ function added
3.0.1 2016-05-12
LiNX Access iOS Application version 3.0.1 contains a number of minor upgrades:
- German Translations
- The ability to Write File to Chair for a system with an unrecognised configuration
- System Name access level changed to OEM
- Text wrapping improvements for increased legibility
- OEM Gyro calibration uses Live Edit mode only
3.0 2016-04-04
Configuration support for the new LiNX Rehab-lite suite of products which provide multiple drive, seating and lighting functions. In addition, the system now supports Gyro drive assist. Working from an active chair connection, or from a file is now easier to do, and Save and Save As functionality has been improved to assist with managing your files.
2.3.1 2016-03-24
LiNX Access now has language support for German, French, Traditional Chinese & Simplified Chinese.
2.2 2015-04-22
Additional functionality to support the release of the LiNX Drive Only product set.
Improved connectivity robustness that holds the programming session if the home button or off button is pressed, or if power saver functionality activates. Also removed the need to select the LiNX Access Key twice when starting a programming session.
2.0 2014-07-15
Support for LE MR2 systems with new Graphical Programming interface and Live Diagnostics.
1.1 2013-03-29