2.15.4
2024-03-28
- fixed rare issue in waypoint mode where the drone would pause the flight unexpectedly
2.15.3
2023-12-06
- fixed crash when stitching a pano
- fixed startup crash on older iOS versions
2.14.3
2022-11-10
- fixed take off error for Air 2S
- fixed bug where panoramas would take longer to shoot in some cases
- [DJI Fly drones only] fixed bug where 'Photo Capture Interval' would end after the 99th waypoint
- [DJI Fly drones only] fixed bug where using a too fast 'Photo Capture Interval' setting would result in irregular intervals
- [DJI GO/older drone models only] added new setting 'Enable DJI's Gimbal Interpolation in Waypoint mode' to allow gimbal pitch movements out of signal range
- [DJI GO/older drone models only] when supported by the drone's firmware, custom waypoint speeds will now work even out of signal range
- added new 'Delete My Account' feature
2.14.2
2022-06-22
- Air 2S is now fully supported
- fixed issues with zoom for Mini 2 and Air 2S
2.14.1
2022-06-21
- Air 2S is now fully supported
- fixed issues with zoom for Mini 2 and Air 2S
2.14.0
2022-05-26
- updated Litchi Vue to support the latest DJI drones, learn more at https://flylitchi.com/help#fpv-p3
- Litchi Vue now comes included with Litchi
- the maximum number of waypoints per mission has been increased to 10000, up from 99
- added new 'Sync Local Missions' setting which lets you enable or disable cloud sync for missions created on the device
- Go Home Altitude, Maximum Altitude and Minimum Location Accuracy can now be set in feet when using Imperial units
- added new 'RTMP Live Streaming Bitrate' and 'RTMP Live Streaming Buffer Time' settings
- fixed RTMP live streaming issues
2.13.2
2022-04-08
- security improvements
2.13.1
2022-04-05
- misc improvements and bug fixes
2.13.0
2022-03-26
- added support for shooting AEB x3 with custom ev offsets (0.7 to 2)
- misc improvements and bug fixes
2.12.2
2022-03-17
- added support for Mini 2 and Mini SE
- added support for Air 2S (app restart required when starting new autonomous flights)
- Photo Preview now lets you share to any app that can accept a photo, not just Facebook
- in VR mode, using the custom function 'Recenter Gimbal' now correctly resets the yaw head tracking
- fixed issues with Facebook/RTMP live streaming
- misc improvements and bug fixes
2.12.1
2022-03-14
- added support for Mini 2 and Mini SE
- added preliminary support for Air 2S (manual flight only)
- Photo Preview now lets you share to any app that can accept a photo, not just Facebook
- fixed audio issues with Facebook/RTMP live streaming
2.12.0
2022-03-12
- added support for Mini 2 and Mini SE
- added preliminary support for Air 2S (manual flight only)
- Photo Preview now lets you share to any app that can accept a photo, not just Facebook
- fixed audio issues with Facebook/RTMP live streaming
2.11.0
2022-02-22
- added support for RTMP streaming
- added new GPS Coordinates Format setting
- misc improvements and bug fixes
2.10.1
2021-10-07
- added support for Mavic Air 2
- added waypoint mode for Mavic Mini 1 and Mavic Air 2
- Facebook login is no longer supported. If you were using Facebook to log in, please migrate your Litchi account at https://flylitchi.com/facebooklogin
- fixed a bug in Follow mode where the gimbal would not stay on the subject when there are elevation changes
- fixed bug where Litchi Vue would fail to connect
- fixed flickering bug with inspire 2 gimbal
- misc improvements and bug fixes
2.9.1
2020-11-25
- added support for Mavic Mini 1, all flight modes are supported except waypoint which will come in a future update
- added Follow mode
- Panorama Database has been revamped, stitching is improved and you can now stitch up to 130 megapixels spherical panoramas on iPhone and up to 220 megapixels on iPad Pro
- added new "Auto Stitch Panoramas" general camera setting. When enabled, after shooting a panorama, Litchi will automatically stitch it in low resolution in the background
- added Simulator mode that can be used to simulate a flight, enable/disable it with a long press on the top bar's flight mode (requires a connection to the drone)
- added new "Switch Flight Mode" custom function to switch the Mavic Mini's flight mode
- added new Dynamic Homepoint setting
- added support for Auto Exposure Bracketing (AEB) photo capture mode for Mavic Mini
- AutoPano now shoots 360x110 spherical panoramas compared to 360x90 before
- Mavic 2 Zoom's optical zoom is now correctly reported in the UI
- fixed bug where sharing a panorama on Facebook would fail
- misc improvements and bug fixes
2.9.0
2020-11-20
- added support for Mavic Mini, all flight modes are supported except waypoint which will come in a future update
- added Follow mode
- Panorama Database has been revamped, stitching is improved and you can now stitch up to 130 megapixels spherical panoramas on iPhone and up to 220 megapixels on iPad Pro
- added new "Auto Stitch Panoramas" general camera setting. When enabled, after shooting a panorama, Litchi will automatically stitch it in low resolution in the background
- added Simulator mode that can be used to simulate a flight, enable/disable it with a long press on the top bar's flight mode (requires a connection to the drone)
- added new "Switch Flight Mode" custom function to switch the Mavic Mini's flight mode
- added new Dynamic Homepoint setting
- added support for Auto Exposure Bracketing (AEB) photo capture mode for Mavic Mini
- AutoPano now shoots 360x110 spherical panoramas compared to 360x90 before
- Mavic 2 Zoom's optical zoom is now correctly reported in the UI
- fixed bug where sharing a panorama on Facebook would fail
- misc improvements and bug fixes
2.8.0
2019-11-26
- when starting a waypoint mission, you can now choose to start at a specific waypoint rather than from the beginning
- added new "Exit Waypoint Mission on Signal Loss" aircraft setting. When enabled, waypoint missions will end when signal is lost. When that happens, the drone will then execute the failsafe procedure (which can be changed with the "Signal Lost Behavior for Manual Flying" setting)
- added new "Map Auto Zoom" general setting which lets you disable the map auto zoom
- misc improvements and bug fixes
2.7.1
2019-11-12
- fixed Facebook login
2.7.0
2019-10-18
- added new mission setting "Photo Capture Interval" that can be used to automatically start an interval capture for the entire mission or between specific waypoints
- misc bug fixes
2.6.7
2019-08-29
- added new Tracking Quality setting in Track mode, set to High for improved tracking accuracy (only for powerful devices)
- it is now possible to add a POI while a mission is in progress using the custom function "POI at Aircraft"
- misc improvements and bug fixes
2.6.6
2019-06-12
- misc bug fixes and improvements
2.6.5
2019-02-25
- misc improvements and bug fixes
2.6.4
2019-01-14
- misc bug fixes and improvements
2.6.3
2018-11-21
- added support for Mavic 2 Enterprise
- updated no fly zone system to support GEO 2.0
- fixed Inspire 2 gimbal bug where it would be forced to switch to Free mode
2.6.2
2018-09-28
- added support for Mavic 2 Zoom/Pro
2.6.1
2018-09-24
- added support for Mavic 2 Zoom/Pro
2.6
2018-09-22
- added support for Mavic 2 Zoom/Pro
2.5.1
2018-08-16
- added support for Phantom 4 Pro V2
- enabled waypoint and orbit mode for Spark
- added support for Manual Focus mode
- added 'Calibrate Lens' camera setting, can be used to set Infinity Focus
- the custom key 'Focus to Infinity' is now available for all drones with variable focus
- the gimbal pitch angle in degrees is now displayed in the UI
- added camera exposure settings to the VR mode on-screen display
- added 'Transmission Channel' setting for Mavic Air/Spark
- added 'Frequency Band' setting for Phantom 4 Pro V2
- added 'Lock Gimbal when Shooting Photos' setting
- added 'Sync Gimbal Yaw with Aircraft Heading' setting
- added 'Show VPS Height when Used' setting
- fixed an issue where the VR mode would stretch too much on iPhone X
- fixed a display bug with the pause button in waypoint mode
2.5
2018-08-14
- added support for Phantom 4 Pro V2
- enabled waypoint and orbit mode for Spark
- added support for Manual Focus mode
- added 'Calibrate Lens' camera setting, can be used to set Infinity Focus
- the custom key 'Focus to Infinity' is now available for all drones with variable focus
- the gimbal pitch angle in degrees is now displayed in the UI
- added camera exposure settings to the VR mode on-screen display
- added 'Transmission Channel' setting for Mavic Air/Spark
- added 'Frequency Band' setting for Phantom 4 Pro V2
- added 'Lock Gimbal when Shooting Photos' setting
- added 'Sync Gimbal Yaw with Aircraft Heading' setting
- added 'Show VPS Height when Used' setting
- fixed an issue where the VR mode would stretch too much on iPhone X
- fixed a display bug with the pause button in waypoint mode
2.4
2018-06-14
- pano mode speed and reliability improvements
- pano mode settings revamp
- when the general setting "Show GPS coordinates" is enabled, you can now edit waypoint GPS coordinates in their settings
2.3
2018-05-29
- fixed bug where in some cases a waypoint mission could fail to start without showing a reason
- fixed bug where the orbit speed could not be set without being connected to a drone
- fixed bug where having more than 60 waypoints would cause lag
- added new "Save to Panorama Database" pano setting
2.2
2018-04-24
- added support for Mavic Air
- fixed exposure compensation bug in Shutter/Aperture Priority modes
2.1.4
2018-04-06
- added lock/unlock feature for mission editing; when loading a mission it will be locked for editing by default
- improved support for altitudes above ground level in waypoint mode
- fixed bug where in some cases the POI setting of a waypoint would not save correctly
2.1.3
2018-04-02
- added lock/unlock feature for mission editing; when loading a mission it will be locked for editing by default
- improved support for altitudes above ground level in waypoint mode
- fixed bug where in some cases the POI setting of a waypoint would not save correctly
2.1.2
2018-03-30
- added lock/unlock feature for mission editing; when loading a mission it will be locked for editing by default
- improved support for altitudes above ground level in waypoint mode
- fixed bug where in some cases the POI setting of a waypoint would not save correctly
2.1.1
2018-01-18
- re-enabled Infinity Focus (Mavic Pro only)
2.1.0
2018-01-11
- added support for x7 camera
- updated to DJI SDK 4.4 which fixes the crash on 32 bit devices
2.0.0
2017-12-23
- speed improvements for panoramas shot with Pano mode
- added Auto Pano and Panorama database features (can be used for in-app panorama stitching and sharing), learn more at https://flylitchi.com/help#pano-p3
- known issue in 1.19.0 and 2.0.0: Litchi will crash at startup on older iOS devices (iPhone 5, iPhone 5c, iPad 2, iPad 3, iPad 4 and iPad mini 1) due to a recent update from DJI's software libraries, we are working on restoring support for these devices
1.19.0
2017-11-07
- added support for iPhone X
- added RTH/Land button in FPV mode
- added Smart Return to Home general setting
- added support for bluetooth controllers
- added "Find My Aircraft" in general settings
- added a custom function to "Toggle FPV/Main Camera" (Inspire 2)
- known issue in 1.19.0: Litchi will crash at startup on older iOS devices (iPhone 5, iPhone 5c, iPad 2, iPad 3, iPad 4 and iPad mini 1) due to a recent update from DJI's software libraries, however this should be fixed in our next update. Our recommended devices are: iPad mini 4, iPad 2017, iPad Air 2, iPad Pro, iPhone 6s, iPhone 6s+, iPhone 7, iPhone 7+, iPhone 8, iPhone 8+, iPhone X.
1.18.0
2017-08-04
- added support for Spark: all flight modes are supported except waypoint/orbit at this time (if you are using Spark with the remote controller, you must connect using Wi-Fi between the RC and the mobile device, connecting via USB OTG is not currently supported)
- added Tripod function in FPV mode (for supported drones only: Spark/Mavic Pro/Phantom 4 Adv-Pro/Inspire 2)
- added custom function to "Toggle Tripod Mode"
- added "Gimbal Gesture Control" general setting that lets you enable/disable the scroll movements on the video preview to move the gimbal
- added "Show GEO Warning Zones" general setting that lets you show/hide GEO warning zones on the map
- added a stop button in all flight modes that can be used to stop the current flight (waypoint, orbit, pano, focus, track)
- a warning will now be shown when "Multiple Flight Mode" is disabled in DJI Go
1.17.2
2017-07-18
- added Precision landing and Landing protection settings for Phantom 4
- added support for polygon shaped no fly zones (for china)
- misc improvements and bug fixes
1.17.1
2017-07-11
- misc improvements and bug fixes
1.17.0
2017-07-03
- with the latest DJI firmware for Mavic Pro (v01.03.0800 or higher), Phantom 4 Pro (v01.04.0602 or higher), Phantom 4 Advanced (v01.00.0128 or higher), Inspire 2 (v01.01.0010 or higher), Phantom 3 Standard (v1.9.20 or higher), Phantom 3 4K (v1.6.50 or higher), Phantom 3 Advanced/Pro (v1.11.20 or higher), Phantom 4 (v02.00.0106 or higher), users in China are required to activate Litchi by logging into their DJI account at least once every three months, this can now be done within Litchi. Outside of China, Litchi will automatically activate the application without requiring the user to log in within Litchi or DJI Go
- added support for Phantom 4 Advanced and Matrice 200
- added "Over Exposure Warning" general camera setting
- added "Enhance Display for D-Log Filter" general camera setting
- fixed issue where the RC shutter button would not always use the selected capture mode
- misc improvements and bug fixes
1.16.2
2017-05-25
- added "Share" button in the Facebook live settings giving you the ability to share your live stream on a friend's timeline or in a Facebook group
- misc improvements and bug fixes
1.16.1
2017-05-19
- added Facebook live streaming feature (tap on the share icon at the top right corner of the video preview to start it)
- added "Cache Videos" setting. When enabled, recording videos with the drone will also cause Litchi to save the video to the "Litchi Video Cache" album in the Photos app
- added "Cache Photos" setting. When enabled, photos you take will be saved to the 'Litchi Photo Cache' album (in the Photos app). Photo Caching does not work when the image format is set to RAW or when using the Interval capture mode. Photo Caching does not work during Waypoint, Pano and Track sessions
- added "Photo Preview" setting. Requires "Cache Photos" setting to be enabled. When enabled, after taking a photo a preview will be shown along with a share button providing an easy way to share the photo to Facebook
- added AutoFocus Continuous mode (AFC) for Mavic Pro, Phantom 4 Pro and X4S
- added uplink/downlink signal information to the VR mode display
- faster panoramas with Mavic Pro
- reliability improvements for Pano mode
- references to HealthyDrones replaced with its new name, Airdata UAV
- upgraded Airdata UAV's free subscription offer from Gold to Pro plan
- fixed issue with M600/M600 Pro RC switch not being recognized correctly
- misc improvements and bug fixes
1.16.0
2017-05-17
- added Facebook live streaming feature (tap on the share icon at the top right corner of the video preview to start it)
- added "Cache Videos" setting. When enabled, recording videos with the drone will also cause Litchi to save the video to the "Litchi Video Cache" album in the Photos app
- added "Cache Photos" setting. When enabled, photos you take will be saved to the 'Litchi Photo Cache' album (in the Photos app). Photo Caching does not work when the image format is set to RAW or when using the Interval capture mode. Photo Caching does not work during Waypoint, Pano and Track sessions
- added "Photo Preview" setting. Requires "Cache Photos" setting to be enabled. When enabled, after taking a photo a preview will be shown along with a share button providing an easy way to share the photo to Facebook
- added AutoFocus Continuous mode (AFC) for Mavic Pro, Phantom 4 Pro and X4S
- added uplink/downlink signal information to the VR mode display
- faster panoramas with Mavic Pro
- reliability improvements for Pano mode
- references to HealthyDrones replaced with its new name, Airdata UAV
- fixed issue with M600/M600 Pro RC switch not being recognized correctly
- misc improvements and bug fixes