1.13.2
2024-02-06
- Fixes some layout bugs on X/Y module
- Fixes crash when drawing/recording automations
- Fixes keyboard module selection on iPhone
- Fixes crash when using AUM AUv3 preset change functionality
1.12.6
2023-05-15
- Fixes double speed bug when host has a 32 frames buffer size
- Added clip composer mouse support
- Added copy/paste selected notes between clips (long press composer to access menu)
1.12.5
2022-09-23
- Added follow actions loop amount (under follow actions settings)
- Added clip "from start" and "continue" play modes (under clip settings)
- Added probability to follow/transform clip actions
- Fix note events being sent during recording countdown
- Fix synchronization issues when creating notes in Ableton Live
- Fix midi not playing when using LK with UBRIDGE
- Fix hung notes when recording and triggering clips
- Fix duplicated notes when using LK hosted with scene follow actions
1.12.4
2022-07-08
- Auto zoom fit notes when a new clip finishes recording
- Added record fixed length setting (defined by default to OFF under MATRIX - MIDI settings)
- Added record count down setting (defined by default to 0 under MATRIX - MIDI settings)
- Default clip length is now a setting (defined by default to 1 under MATRIX - MIDI settings)
- Tempo can now also be set via input dialog
- Piano-roll vertical viewport navigator was reintroduced
- Controller module's knobs were repositioned below buttons
- Fix composer keyboard notes preview
- Fix MATRIX's Live mode crossfader
- General bug fixes and improvements
1.12.3
2022-05-27
- Add matrix setting to enable/disable sync controllers at startup
- Fix clip loop trigger actions state saving
- Fix matrix mode state persistence
- General bug fixes and improvements
1.12.2
2022-03-13
- Add 'select slot on fire' setting
- Add 'arm track on select' setting
- Fix shift buttons not respecting the same state
- Fix device knob stutter behaviour when using live mode
- Bug fixes
1.12.1
2022-03-01
- Performance improvements
1.12.0
2022-02-03
- Transport bar and composer toolbar buttons and icons revision
- Removed inner drag bar which would allow to see the velocity, probability and automations
- Added a toggle button to switch between notes view and automations editing
- Automations Refactor:
- Automations lanes can be renamed
- Automation nodes can be selected. When selected, nodes can be moved as a whole
- Automation lines between nodes can be curved when dragging them with shift button enabled
- Automations lanes can be copy/paste between clips. Where there are automations nodes selected, only those will be copied. Otherwise the entire lane will be copied
- Matrix settings now has the option to allow song to respond to midi realtime start/stop messages
- Song signature and trigger/recording quantization were moved from Matrix top bar to Matrix settings panel.
- Composer properties panel is now divided in tabs with icons representing each section
- Added the ability to assign midi mapping to Matrix clips/buttons manually using a dialog, which can be opened by double clicking the clip/button to be mapped
- Grid can now be quantized to triplets
- Allow notes to be smaller than grid resolution
- Add welcome dialog to standalone
- Fix transport bar play/stop when LK Modules had a different mode than Matrix module
- Pressing play while song is running, restarts all running clips
1.11.8
2022-01-09
- Use standard convention (1-16) in matrix's midi learn channel label
- Aims to improve overall stability
1.11.4
2021-10-15
- Add clip actions (accessed via clip properties context menu)
- Added APC40 mk2 support
- Added Launchpad mk2 support
- General bug fixes and improvements
1.11.3
2021-09-23
- Add song settings panel
- Add device and channel filtering to program change messages that change patch
- Record notes that were pressed before clip starts playing
- Fix clip length when created with recording
- Fix composer closing when switching modules
- Fix bug when disabling arm/record when recording a clip
1.9.3
2021-01-16
- Added MPE support to keyboard module
- Added fold notes, fold scale and fold notes to scale support
- Added fullscreen mode button to bottom bar
- Added inspector button button to bottom bar
- Added Korg Nano Kontrol Studio support
- Added Novation Launch Control XL support
- General bugs fixes and improvements
1.9.2
2021-01-08
- Fix midi input bug
- Fix layout issues on smaller screens
- Fix glitch while recording notes to a clip
- Fixes a bug where a note off wouldn't be sent out on clip stop
- General bug fixes and improvements
1.9.1
2020-12-22
- Performance improvements
- Track arm button is now always visible
- Fix XY and KEYBOARD midi cc to MATRIX
- General bug fixes and improvements
1.9.0
2020-12-13
- Sample accurate midi events (playback & recording)
- Clip drag and copy (with shift)
- Notes drag and copy (with shift)
- Fixes playback jitter
- Fixes sample rate (AUv3)
- Adds the ability to sync with host when hosted (status bar link icon)
- Send MIDI clock start/stop events only when enabled
- General bug fixes and improvements
1.8.5
2020-11-30
- Added note probability
- Added another shift button to the left of the transport bar
- Save track arm and global recording state on song model
- Fixes crashes/freezes while handling midi input
- Fixes crash on midi import to a clip while playing
- General bug fixes and improvements
1.8.4
2020-11-12
- Fixed bug that would might cause LK to crash when disconnecting midi devices
- Added Launchpad X support
- Added APC Key 25 support
- Added Launchpad Mini MK2 support
- Added the ability to switch off controller via Menu->Midi menu item
- Added grid to automations editor with snap support
- Properties context menu for track and scene
- Midi trigger for scene launch and track stop
- Midi trigger can now be a note
- Recording of clips without pre defined length
- Allow undo/redo recorded notes
- Clip notes now have clip color
- Shift+tap to select/deselect notes
- General bug fixes and improvements
1.8.3
2020-10-30
- Swing and humanize
- Added Akai MPC Mini support
- Midi Export
- Ableton Live Export
- General bug fixes and optimizations
1.8.2
2020-10-19
- New notes operations
- Break down of clip inspector into sections
- Added chord and melody generation tools
- Fixed mute state on solo tracks change
- Fixed recording to multiple armed tracks
- Shift + Selection appends notes to selection
- Note velocity is now independent for each note unless Shift is pressed
- Improved restore state
1.8.1
2020-10-03
Keyboard module: natural keyboard
Keyboard module: double keyboard on tablet
Matrix: Navigate through selected track and scene using the arrows in the transport bar
Matrix: Added move left, move right and add track to track options
Matrix: Added cut operation to clip context menu
Matrix: Fixed audio glitch on add/delete track/scene
Matrix - Composer: keyboard scale saved as clip property- Composer: custom scale
Matrix - Composer: fixed viewport navigation
Matrix - Composer: fixed automation loading bug
Matrix - Composer: removed selected pitch indicator
Matrix - Composer: Keyboard Scales
Matrix - Composer: Multi-Touch Piano Roll
Matrix - Composer: allow fully hide modulations section
1.8.0
2020-09-26
- MIDI CC automations
- Visual review of all modules
- Fixed AUv3 MIDI playback drift
- Performance improvements
- General bug fixes and optimizations
1.7.6
2020-09-09
- More clip follow actions (MATRIX MIDI Mode)
- Clip play state saving (MATRIX MIDI Mode)
- Aims to fix crashes
1.7.4
2020-08-29
- Fixes bug in clip grid when using group tracks (Live Mode)
- Fixes bug in selected notes move (Clip Composer)
1.7.3
2020-08-25
- Import MIDI files (MATRIX - MIDI Mode)
- Bug fixes and optimisations
1.7.2
2020-08-14
- Add clip properties panel (MATRIX MIDI mode only)
- Add clip copy/paste/delete context menu (MATRIX MIDI mode only)
- Add move scene up/down options (MATRIX MIDI mode only)
- Add clip follow actions & midi cc triggering
- Performance improvements
- General bug fixes and improvements
1.7.1
2020-07-17
- Fix Apple Pencil support
- Fix note min length
- Fix timeline disappearing
- Fix notes delete on move and overlap
- Fix quantized recording
- Fix note off when track is muted while playing
- Fix tempo when hosted (AUv3)
- Fix host play state sync (AUv3)
- Fix clock source label (AUv3)
- General bug fixes and optimizations
1.7.0
2020-07-09
- Add AUv3 support
1.6.2
2020-06-08
- Fixes crashes related to track selection and project loading
- General bug fixes and improvements
1.6.1
2020-05-01
- Fixes group track crash
- Fixes CHORDER zoom
- General bug fixes and improvements
1.5.5
2019-08-25
- Inter App Audio support
- Allow track and scene name change
- Aims to fix crash at startup on some devices
1.5.4
2019-08-07
- Makes MIDI PADS, KEYBOARD and CHORDER available as midi input
- Fixes bug that would cause crash when stopping song with playing notes, if there's no midi output device
- Fixes clip slot name text overflow
- Sends note off when a playing note is deleted
- General bug fixes and improvements
1.5.3
2019-07-30
- Add background mode support
- Saves tempo information along with matrix module projects
- Fixes chorder new layout prompt
- Fixes bug that would make LK crash when a note was moved while playing on a track without midi device set
- Fixes metronome sync with song tempo in midi mode
- Fixes metronome usage in live mode
- Fixes bug that could cause crash when arming a track
- Fixes bug that would cause hanging notes when disabling arm while pressing notes
- General bug fixes and improvements
1.5.2
2019-07-19
- Add background mode support
- Improved Ableton Link support
- Metronome on Matrix Module (Midi Mode)
- Bug fixes and improvements
1.5.1
2015-03-05
- Fixes bug that would prevent a proper use of MIID PADS, MIDI CONTROLLER, CHORDER and KEYBOARD modules, if the MATRIX started in Live mode
- Fixes bug in MATRIX module that would make clip names to be displayed in the wrong positions
1.5.0
2015-03-05
- MATRIX module now supports MIDI mode. Add tracks and scenes and sequence your hardware gear easily and intuitively using an USB midi interface adaptor or sequence software apps via virtual midi.
- MATRIX module under MIDI mode features an undo/redo engine and allows you to save/load your projects.