3.3.2
2022-06-23
Stability and update required by apple
3.3.1
2022-05-13
Vertical Smokers
Updated context for vertical smokers
Library and security fixes
3.3.0
2021-08-20
New app logo and name
3.1.20
2021-01-08
Bug fixes and performance improvements
3.1.19
2020-11-12
Added WiFi signal strength visibility for WiFi capable devices.
3.1.18
2020-10-28
This update contains bug fixes and improved product support.
3.1.17
2020-10-01
Fixed an issue in which probe temperature notifications were presented multiple times.
3.1.16
2020-09-03
Max Fahrenheit meat probe temperature changed to 225 degrees for Gravity series grills.
Fixed a problem that was preventing users from controlling AWS devices when on V001 firmware.
3.1.15
2020-07-24
-Fixed an issue that was causing the "Connect to WiFi" error message to be displayed while connected to a device via Bluetooth.
3.1.14
2020-07-01
-Battery life optimizations
-Resolved an issue that was causing the app to crash when the app was in background.
-Resolved an issue where users were unable to delete their device
-Optimizations to how users are informed about device updates
3.1.13
2020-06-18
This update includes:
Battery Life Optimizations.
Firmware version added to user profile.
Weak WIFI signal warning during set-up.
Safe Mode warning removed from Gravity Series.
Upon Log in, Pairing will not be initiated if there is an existing device on the account.
Improved reliability of pop up that informs the user when an update is available.
Resolved an issue that was causing the set temperature to be inaccurate when switching between F and C.
Resolved issues to the device dashboard screen that were causing errors after signing into an account with existing devices .
Resolved an issue where the profile section was not displaying a Masterbuilt device’s firmware version number even if the device was connected to the app.
Resolved an issue in which the app was unable to connect to a device if the user had multiple devices.
Resolved an issue where the Masterbuilt iOS app was unable to connect to a WiFi enabled device that was provisioned using the Android app due to mismatch in the Letter case in which each platform was saving the MAC addresses.
Resolved an issue where Masterbuilt App would present users with Connection Error popups when returning to the application after putting the application in the background while being connected to a device.
3.1.12
2020-05-25
Resolved a crash that would happen when disconnecting from a Bluetooth Masterbuilt device.
3.1.10
Improvements to the Onboarding and Device Setup experience.
Resolved an issue that was causing false connection errors for users connected to their Masterbuilt device via WiFi.
Resolved an issue that was impacting the accuracy of the target temperature range for Generation 4 Masterbuilt Smokers that support Smoke On Demand .
Ability to change temperature to Celsius has been temporarily disabled for devices located in the United States. This will be resolved in a future update.
3.1.11
2020-05-23
Resolved a crash that would happen when disconnecting from a Bluetooth Masterbuilt device.
3.1.10
Improvements to the Onboarding and Device Setup experience.
Resolved an issue that was causing false connection errors for users connected to their Masterbuilt device via WiFi.
Resolved an issue that was impacting the accuracy of the target temperature range for Generation 4 Masterbuilt Smokers that support Smoke On Demand .
Ability to change temperature to Celsius has been temporarily disabled for devices located in the United States. This will be resolved in a future update.
3.1.10
2020-05-21
Improvements to the Onboarding and Device Setup experience.
Resolved an issue that was causing false connection errors for users connected to their Masterbuilt device via WiFi.
Resolved an issue that was impacting the accuracy of the target temperature range for Generation 4 Masterbuilt Smokers that support Smoke On Demand .
Ability to change temperature to Celsius has been temporarily disabled for devices located in the United States. This will be resolved in a future update.
3.1.9
2020-05-19
Resolved an issue where the App would display the wrong temperature if the user tapped the C/F button (remote screen) in quick succession.
Implemented multiple WiFi communication maintenance steps that will be performed every time the app connects to a WiFi enabled Masterbuilt device.
MAC Address is now displayed for each device in the Profile section of the App.
3.1.8
2020-04-29
Resolved an issue where target temperature notifications would sometimes not show if connected to a device via Bluetooth.
3.1.7
2020-04-22
Implemented support for Celsius temperature unit.
3.1.6
2020-04-10
Resolved multiple pairing issues.
Implement support for the Gravity Series™ 1050 Grill + Smoker.
3.1.5
2020-02-04
Resolved multiple connectivity issues for WiFi Masterbuilt devices.
3.1.4
2019-12-17
Resolved an issue where the Smoke On Demand button would not show up on devices that support it.
Resolved a database crash.
3.1.3
2019-11-06
Resolved an issue where meat probe numbers were not displayed properly if connected via bluetooth.
Resolved an issue where the app would display a connection error message even though the device was still connected.
Resolved a crash that happened if the user left the app and came back to it five minutes later while being connected to a device.
3.1.2
2019-10-16
Resolved an issue in the WiFi selection screen.
Resolved multiple crashes and remote issues.
Resolved multiple issues on the meat probe screen.
Added support for WiFi enabled Masterbuilt devices.
3.1
2019-10-15
Resolved multiple crashes and remote issues.
Resolved multiple issues on the meat probe screen.
Added support for WiFi enabled Masterbuilt devices.
3.0.5
2019-04-27
Resolved an issue where the in remote control was not displaying the Smoker or Broiler mode properly if its heating elements were Off.
Resolved an issue where tapping Skip during the onboarding flow was not taking the user to the recipes screen.
Resolved an issue where text was being cropped in some shopping lists.
Resolved an issue where the done and next buttons where not working as expected during device registration.
Resolved a crash in the temperature picker.
Resolved a crash during app launch that happened if new recipes were added server side.
New feature: Remote control now shows the current temperature and remaining time no matter what mode the device is in, as long as it is turned On.
New feature: App now lands directly on the device selection screen upon launch.
New feature: Implemented connection troubleshooting screen letting the user know how to resolve most bluetooth connection issues. This screen shows if the user fails to pair twice during Onboarding or their device disconnects while they are using the remote control.
New feature: Device registration fields are now required to be filled out before tapping next.
New feature: App version is now shown in the profile section so it can be easily retrieved for support calls.
3.0.4
2019-02-22
- New Feature: Current Smoker temperature is now displayed all the time.
- New Feature: A notification sound will be played when the meat probe-target temperature is reached. (New models only)
- Fixed: Tapping skip during onboarding wouldn’t take the user to the recipes screen.
- Fixed: Recipes were missing a few steps.
- Fixed: The recipe list screen would scroll to top automatically after coming back from a recipe.
- Fixed: The app’s remote wasn’t displaying the remaining cook time if there was no temperature setting.
- Fixed: A crash would occur in the temperature picker screen.
- Fixed: Smokers would sometimes be duplicated in the app’s dashboard if the Smoker’s was added from the profile screen.
- Fixed: The user couldn’t navigate back to the profile screen after adding a smoker from within their profile.
3.0.3
2018-11-07
Resolved an issue where the app would not show an alert after the cooking time reached zero.
3.0.2
2018-11-01
Resolved an issue where the temperature picker would display values not supported.
Resolved an issue where timer notifications would not display if the app was open when they fired.
3.0.1
2018-10-19
Resolved an issue where the information sent via device registration would be malformed if the receipt image was missing.
Extended connection timeout to improve pairing with legacy devices.
Implemented a more comprehensive crash report tool.
3.0
2018-10-05
Improved Design
•Learn how to master the art of smoking, grilling, frying, and more.
Improved Connectivity
•Stay connected to your smoker with the latest Bluetooth 4 technology. Bluetooth connectivity has been enhanced with the latest technology, software, and industry best practices.
Recipes
•Craft a masterpiece to feed a couple or a crowd. Choose your cooking method, food type, and start the journey.
Shopping List
•Capture all the ingredients to perfect slow-cooked ribs in one place. Experimenting with different wood flavors and seasoning is no problem.
Product Registration
•Protect your investment and register your Masterbuilt product. On your path to mastery, we’re with you every step of the way.
2.1
2016-08-19
- Bluetooth issues fixed
- Remote screen UI has been changed
- Universal Timer is available in Side Bar
- Access remote from side bar menu controls
2.0.2
2016-02-16
- Fix for bluetooth connectivity issue.
2.0.1
2016-01-07
- Setting temperature issue is now fixed
2.0
2015-12-18
Smoking is made simple and smart with the Masterbuilt app. Turn your smart device into a remote control for your digital electric smoker! With integrated Bluetooth® Smart technology, you can operate your smoker from the comfort of your home. With new alarm and alert options, you are in complete control of your smoking experience.
FOR USE WITH BLUETOOTH-COMPATIBLE MASTERBUILT SMOKERS ONLY!
FEATURES
Control multiple Masterbuilt digital electric smokers with a single mobile device.
Control the same Masterbuilt digital electric smoker from multiple devices.
Set your smoking temperature.
Set your smoking time and receive alerts
Monitor the internal meat temperature from the comfort of your home.
Power your smoker and smoker light on/off.
1.7.0
2015-09-11
- Bug fixes and improvments
1.6.0
2014-11-13
- Added support for iOS 8, iPhone 6, and iPhone 6+
1.5.3
2014-11-04
Bug fixes and optimizations.
1.5.1
2014-08-26
- Bug fixes and optimizations.