OneKey: Blockchain DeFi Wallet

New Features
- Supports OneKey Pro hardware connection and firmware upgrades.
- Supports Nervos and Neurai networks.
- Dapp connection now supports EIP6963.
- Editable transaction fees on the Solana network.

Bug Fixes
- Fixed missing priority fees when cancelling limit orders with Jupiter on Solana.
- Resolved issues with using market orders with Drift on Solana.
- Fixed transaction fee retrieval failures on EVM networks.
- Corrected transaction status display errors on the DOT network.
- Fixed transfer failures of frozen Dapp balances on Astar network.
- Addressed connection errors with Cellana on Aptos network.
- Resolved account balance display issues on Tron network.

Improvements
- Enhanced accuracy of token details retrieval on Solana.

Bug Fixes
- Fixed transaction parsing failure for specific token transfers on Solana.
- Resolved Solana's inability to process token swap transactions.
- Addressed Thorswap order creation errors.
- Corrected transaction fee display issues due to Gas Limit.
- Rectified high fees during Merlinswap transactions.

Improvements
- Default tip addition optimized for Solana transactions.
- Refined fee limit settings for BTC Fork network.

New Features
- Support for Blast Network
- Support for Bitcoin Signet Test Network
- Support for Cosmos Babylon Test Network
- Support for Mint Test Network

Bug Fixes
- Fixed an issue where data synchronization migration fails in multi-end scenarios
- Fixed a UI display issue for cross-chain rewards to Arbitrum Network when using the Socket protocol

Improvements
- Improved the issue where invoices for internal payments under the Lightning Network can be reused

New Features
- Added support for Manta Atlantic Network.
- Supported Dapp invocation of the inscribe BRC-20 process.

Bug Fixes
- Fixed an issue where NFT could not be displayed on the BTC network.
- Fixed a failure prompt issue with single-chain account signatures on the BTC network.
- Fixed a transfer error issue on the Kusama network.
- Fixed an error issue when blind signing data was too large.

Improvements
- Renamed Ethereum Fair (ETHF) network to DIS CHAIN.
- Optimized the display logic for holdings in the DeFi module.

New Features
- Swap: Added "Thorswap" for router
- Algorand chain now supports atomic transfer

Bug Fixes
- Fixed: Amount not displayed on the transfer page when switching from fiat currency to cryptocurrency as the default currency
- Fixed: Inability to export private keys for ADA single-chain accounts
- Fixed: Only high network rate working for max ETF token transfer
- Fixed: Display issues for some BRC-20 .sats domain names asset
- Fixed: Error when connecting non-Taproot addresses to list items on Unisat marketplace
- Fixed: Camera cannot be opened for some users during Onramper KYC verification
- Fixed: Styling issues on iPad 11 Explore page

Improvements
- Swap: Optimized 1inch router
- Added transfer guidance when BRC-20 transferable balance is 0
- Optimized lightning network account balance display
- Optimized insufficient balance prompt during STC transfers

New Features
- Introduced a new UI for Discover
- Added support for sending BTC from manually added addresses

Bug Fixes
- Fixed: Reset failed due to the app being terminated by the app manager
- Fixed: Network fee estimate failed when swapping WETH to ETH
- Fixed: WebLN login failed with LNURL
- Fixed: App restart after tapping close button when verifying PIN code

Improvements
- Made a series of optimizations for Ordinals and UTXO management
- Swap - Optimized swap channels
- Swap - Removed rebundent options
- Browser - Request camera permission from users when websites require camera access

New Features
- Added support for Bitcoin Lightning Network
- Integrated with STAR domains

Bug Fixes
- Fixed: Bulksender - Many to One - Failure could occur when transferring maximum amount of a token in accounts
- Fixed: BRC20 token transfer history would abnormally show sent BTC
- Fixed: All Network - BTC - Inscriptions were still displayed in the NFT list, even after destroying and refreshing token details
- Fixed: Switch Network dialog did not prompt when connecting to Unisat while it was focused on All Network
- Fixed: Batch copy address - Failed to export after setting range 100
- Fixed: Avalanche Network - After jumping to swap it should show the native coin / USDC pair, not pairs of other chains
- Fixed: Swap - The refresh button does not work when the amount was less than minimum swap amount
- Fixed: Showed error "pubkey is not allowed to be empty" when connecting to Unisat (Mobile)

Improvements
- Display details of Limit Order in Swap History
- Optimized state logs

New Features
* Added support for BRC-20 token display, transfer, and receiving; supports inscription destruction
* Enabled 0x RFQ functionality

Improvements
* Optimized rendering of the Token Management page
* Market - Improved tokens sorting

Bug Fixes
* Fixed: Explore - Tags Tab - UI display issue with add and delete buttons
* Fixed: Token details page price history chart initially displayed No Data and lacked loading process prompt
* Fixed: Data migration - incomplete display of imported data text on mobile
* Fixed: Lagging issue in the sending process
* Fixed: Deployment failure of contracts for hardware wallets
* Fixed: Token details page - Incomplete display when the highest or lowest point is on the far left of the line chart
* Fixed: Explore - Tags Tab window switch - Failure to scroll to the just collapsed window upon collapsing again (iOS)
* Fixed: Homepage - Sliding on Tab triggers item click event unintentionally (iOS)
* Fixed: Account verification page - No response when clicking the back button (iOS)
* Fixed: Confirming password change took a relatively long time to succeed (iOS)
* Fixed: Market - In the Watchlist, the "Add Token" button is not fully displayed (on small screen models like iPhone SE2)

New Features
- Bulksender: Supports "Many-to-Many" and "Many-to-One" sending
- Staking: Added support for Lido Polygon Staking
- View Assets in All Networks: Allows manual selection of networks to expedite loading times
- Backup & Migration: Enhanced support for backing up or migrating more content
- Swap: Added 0x channel support for the Base network
- Added Linea, Base, and Mantle networks

Bug Fixes
- Hardware SDK: Adapted to both new and old versions of Messages, resolving Message ID conflicts
- Fixed the issue where spaces couldn't be input while entering Passphrase
- Swap: Fixed the issue where clicking "Max" did not respond or responded slowly
- Fixed the issue of insufficient balance error when sending the maximum value of BTC
- Fixed Linea Bridge issue where there was no prompt or error message when cross-chain transferring to the ETH network
- Fixed the error that occurred when sending a small amount of funds to a new account
- Resolved the issue where a successful Swap on the OpenOcean channel to Xdai resulted in a failed history record
- Fixed the price display issue for Kaspa
- Addressed the issue where switching to the All Networks page with a large account_index would cause freezing
- Fixed the issue of BTC fiat valuation not updating
- Fixed the problem in the Explore module where clicking on suggested autocomplete results did not open web pages
- Various UI minor issue fixes

Improvements
- Updated support for EVM sign_typed_data maximum message length to 1.5KB
- Language packs are now loaded on-demand
- Improved information display on the Account Token Details page

New Features
- All networks - View account assets on different networks in one view
- Add support for showing, inscribing, and transferring Ordinals NFTs
- Add support for rapid staking on Kelepool
- Add support for BTC multisignature address transfer
- Add support for Nexa network

Bug Fixes
- Fixed the issue of the update wizard not prompting for boot upgrade when upgrading across major version to 3.1.0
- Fixed the issue of Kaspa transaction history
- Fixed display issue caused by address caching

Improvements
- When dApps pass in a value without a 0x prefix, it will be processed as hex
- Improved transaction history details view - Show the full address and recognize address type
- You can now send transactions with optional Hex data
- Improved swap prompts
- Improved NFT list paging
- Optimized state logs
- Refinement of EVM-related message signing methods
- Improved data transfer - ignore version limitations between 0.0.x
- Added more RPCs of 1rpc and bloxroute
- Swap - Add an adjustment to the balance reservation according to the current gas price based on Blocknative realtime data
- Adjusted rules of BTC account balance calculation and added account balance modal
- Use revoke.cash as the tool for contract approval management

Bug Fixes
- Fixed the issue that unlocking the screen could cycle through Face ID pop-ups and block access to the account screen

New Features
- Add support for OneKey Lite Gen.2
- You can check token contract address when choosing target token in Swap
- Make native tokens highlighted with a label

Bug Fixes
- Fixed the issue that stuck at loading screen when making CFX transfer
- Fixed the issue that the app may crash when transferring some SUI tokens
- Fixed some UI issues

Improvements
- Gas Monitor - Remember whether the EIP-1559 option is on

New Features
- Add Gas display widget to "Discover"
- Add support for WalletConnect V2
- Add Opside testnet
- Add BTC support for Bulksender

Improvements
- Swap - optimized interface display for Swap details and history
- Optimized token allowance settings for Bulksender
- Trimmed precision of push notification token values for improved readability
- Refactored SOL and CFX related code

Bug Fixes
- Fixed Swap tooltip component issue on mobile devices
- Fixed occasional freeze issue (iOS)
- Fixed unresponsiveness issue after opening 99 windows in browser
- Fixed occasional inability to close window on Discover page
- Fixed some UI issues

Bug Fixes
- Fixed the issue of delayed account balance updates

New Features
- BTC Coin Control - By managing your UTXOs, you can enhance your privacy and control your UTXOs with inscriptions
- Add update wizard for OneKey Mini Firmware 3.0.0
- Swap - Integrated with OpenOcean

Bug Fixes
- Fixed the issue that crashes when sliding and scrolling the account view simultaneously (iOS)
- Fixed the balance display issue after successfully unstaking all tokens on Kelepool
- Fixed some UI issues

Improvements
- Optimized the performance of QR Code recognition
- Improved gesture implementation

New Features
- Add support for Kaspa
- Add support for SUI mainnet
- Add support for updating bootloader of OneKey Classic

Bug Fixes
- Fixed the issue when interacting with Tronscan
- Fixed the issue of displaying blank screen after successfully submitting the swap transaction
- Fixed some UI issues

Improvements
- Add swipe gesture on the tab of Market and Swap
- New UI of Token Details view
- Improve UI and performance on Swap, Limit Order, Token Details and more

4.4.0

New Features
- All new Gas Fee UI - Integrated with BlockNative quotes, easy to use for newbies, powerful and convenient for pro players to customize fees
- Add support for editing nonce - On the transaction confirmation page, tap Advance to edit
- Swap - Add support for limit orders
- Add support for BTC public key export
- Add support for modifying BTC transfer network fee
- Add support for unstaking on kelepool
- Add Conflux eSpace network
- Settings - Clear Cache

Bug Fixes
- Fixed the issue that Tron can’t get token balance and add tokens
- Swap - Fixed the issue that the list of token selector was not sorted in reverse order of token valuation
- Swap - Fixed the issue that the rate was not refreshed
- Fixed the issue that after adding tokens, the chart data and balance could be displayed, but the price was not fetched
- Fixed the issues related to SUI network
- Fixed the exception of iOS importing private key
- Fixed the exception of XRP transactions
- Fixed the issue that DOT cannot update addresses
- Fixed some UI issues

Improvements
- Optimized loading time of NFT details
- Improved Swap UI
- Added an alert to prompt user hasn’t enough coin for network fee, and proivde a button to buy gas
- App and hardware wallet limit changed up to 100

---

4.3.0

New Features
- Add support for searching accounts in account selector

Bug Fixes
- Fixed an issue that could cause a jam when bulk-exporting addresses with hardware wallets
- Fixed the issue that ETH price was not correctly display on zkSync Era
- Fixed the network fee issue that could make it unable to send transactions
- Fixed the issue that some sites could not prompt the spending cap settings request

Improvements
- Improved some UIs

---

4.2.0

New Features
- Add “Bulk Copy Addresses“ - Easy to fetch addresses to distribute funds
- Add support for finding an BTC address by path
- Add support for QR Code with URI Scheme (BTC, BCH, ETH)

Bug Fixes
- Fixed the issue that hardware wallets could not sign EIP-712 for nested arrays
- Fixed the issue of unable to import ALGO private key
- When using cryptocurrency as the default currency, the price of that coin should be 1 (e.g. Bitcoin or Ethereum)
- Some other minor fixes

Improvements
- Disabled the “scroll to focused item” animation after entering the "Network Selector" or "Account Selector" to make the list more snappy
- Support using gesture to switch tab in account page

New Features
- Add update wizard for OneKey Touch 4.1.0 firmware

Bug Fixes
- Fixed an issue that import KeyTag UI could look laggy
- Fixed the issue of some RPC did not accept nonce which is numeric type, causing errors when performing bulk transfer
- Disabled setting the receive amount of the target swap token which could lead to displaying incorrect quote offer in swap
- Fixed the issue that not correctly recognize BCH addresses
- Fixed the issue that not correctly recognize some BTC private keys
- Fixed the issue that data could not be displayed in the confirmation page of some signing or transfer for Aptos
- Fixed the issue of RPC detection on Crypto.org
- Fixed the issue that adding websites to favorites might trim the parameters in the address

Improvements
- Added a menu with options to Copy Address or Open in Browser when clicking a hash or address in transaction details
- Favorites now supports editing name or address
- Improve some UI details

New Features
- Bulksender - Transfer your token to multiple addresses, sending up to 500 addresses at a time
- Add networks: Polkadot Astar, Cosmos Testnet
- Add “Auto“ option for slippage tolerance

Bug Fixes
- Fixed the issue that cannot swap on Polkadot
- Fixed the “Mismatch Network“ issue, now browser will correctly respond to swtich network request from Web3 sites

Improvements
- Added display of amount for EIP-1155 NFTs
- Updated display rules of token security information
- Improved UI performance

New Features
- Added supoprt for Algorand tokens and history, available on app and hardware wallet
- Added notifications for favourite tokens
- Added support for Aptos signing
- Added support for adding wallpapers and resources files on OneKey Touch
- Added dApps sharing

Bug Fixes
- Fixed the issue that can’t revoke NFT allowances
- Fixed some bugs in MARKET tab
- Fixed the UI issue after waking up with deeplink

Improvements
- Use wide-angle instead of ultra wide-angle camera when scaning QR code
- Improved history details UI

New Features
- OneKey has now supported Aptos Mainnet tokens, dApps, with hardware wallet support
- All new dApps explore view UI
- RPC Traffic Light - Showing RPC status on the current network, check and change RPC node with few clicks
- Added support for setting allowance when using OneKey Swap
- Added support for NFTs on Avalanche
- Scan and add tokens with balances automatically on Solana, NEAR, Starcoin Network

Bug Fixes
- Fixed the issue that can’t close passphrase dialog
- Fixed the issue when using personal_sign

Improvements
- Improved swap history UI
- Improved “Restore Accounts” UI

New Features
- Added support for transfering Solana and EVM NFTs
- Now desktop app can receive notifications too
- Added support multi-tab in dApps browser

Bug Fixes
- Fixed the issue that can’t pop up the signing request dialog when sending transactions continuously
- Fixed some UI issues

Improvements
- New “Restore Account” UI
- Added showing address label after resolving .bit domains
- Improved tips of BTC estimated transaction fee and time

New Features
- Support for Aptos(Testnet) tokens and dApps
- Support for entering passphrase on app when using hidden wallet on hardware wallet
- Split the wallet-account selector into the wallet selector and the network-account selector, making it clearer and easier to switch between chain and accounts for more scenarios
- Added ETHF, ETHW into default networks

Bug Fixes
- Fixed the issue that cause white screen after using refresh shortcut
- Fixed the issue that Solana swap history did not show
- Fixed the issue that the connected sites may show duplicate sites
- Fixed the sorting issue in token selector
- Fixed the issue that didn’t show chart and price when can’t fetch price for native token
- Fixed some UI issues

Improvements
- Some UI Improvements

New Features
- Support for Solana swap
- Support for Tron tokens on both app wallet and hardware wallet (with OneKey Classic / OneKey Mini 2.5.0 firmware)
- NEAR has been supported on app wallet in the earlier release. In this release we added support for NEAR on hardware wallet (with OneKey Classic / OneKey Mini 2.5.0 firmware)
- Added management page for connected sites

Bug Fixes
- Fixed some UI typos

Improvements
- Improved NFT history UI
- Combined approve and swap transaction signing into one action when an account is not approved swapping contract yet, making it easier to use at the first time.
- Improved some UI styles

New Features
- Added support for entering passphrase on hardware wallet (with firmware 2.4.0 on OneKey Classic / OneKey Mini)
- Added support for .ens and .bit domains
- Added fiat value for NFT assets
- You can stake your ETH for ETH 2.0 now (Your stake cannot be redeemed during the first phase, it may take more than 2 years.)
- Added support for testnet signing and transaction on OneKey Touch

Bug Fixes
- Fixed the issue that reseting app may causes receiving duplicated notifications
- Fixed the issue that token amount could not be set to the maximum value when sending tokens due to the lag of auto tokens balance detection
- Fixed the UI bouncing when initializing the exporting private key modal
- Fixed some UI issues

Improvements
- Removed the llmitation on the number of decimal places when setting gas
- Improved loading performance of the price chart

New Features
- Added support for Solana tokens, NFTs, dApps (Finally arrived! OneKey is the first open source Solana wallet app with hardware wallet support)
- Tokens that already exsited in your address will be automatically added in your token list of account view
- You can now swap coins from BTC to EVM tokens
- Added more token sources that makes searching tokens more convenient

Bug Fixes
- Fixed the issue that can’t use “personal_sign” with hardware wallet on some sites
- Fixed the issue that wallet or account can’t be shown in time after adding it
- Fixed the landscape screen layout issue (iPadOS)

Improvements
- Improved the performance of loading NFTs on landscape screen layout
- Improved performance of connecting hardware wallet via Bluetooth. Added a status indicator for connected devices

New Features
- Now available to connect accounts on the other wallet app with WalletConnect to make cross-chain swap and account management
- Added notification - High volatility alert of BTC & ETH

Bug Fixes
- Fixed the issue that gas price estimation of Starcoin may be abnormal
- Fixed the issue that may cause NFT layouts to display abnormally when switching accounts
- Fixed the issue that may stuck at loading screen due to network connection issues

Improvements
- You can copy account address in hardware wallet when your hardware wallet is not connected
- You can now restore the wallpaper on hardware wallet to default
- Added more default options of RPC on Bitcoin / BSC / Polygon
- You can see balance of the accounts in the list when restoring accounts
- Improved performance of recognizing QR Code
- Provided more information about the error when connecting hardware wallet
- Improved UI layout (iPad)

New Features
- You can now back up your wallet to iCloud
- Added support for Aurora/ETC network
- Added support for Ethereum Classic network
- To avoid the confusion due to our app is not yet support passphrase, the passphrase mode will be disabled by default when connecting to a new hardware wallet (Passphrase support is also coming soon. Stay tuned!)

Bug Fixes
- Fixed the issue that can’t sign successfully when using WalletConnect on OpenSea
- Fixed a layout issue in Emoji picker panel
- Fixed the issue that can’t load tokens and show incorrect information when sending tokens
- Fixed the issue that caused firmware upgrade failure occasionally

Improvements
- Fresh new cross-chain swap experience
- Improved performance of loading NFT
- Improved UI of account view

New Features
- dApps support for NEAR Protocol
- dApps support for Starcoin
- New account view with better performance and experience

Bug Fixes
- Fixed the issue that didn’t show a guide message when using a hidden wallet
- Fixed some connection issues when using hardware wallet

Improvements
- Improved network connection when using SWFT bridge
- Improved UI styles

3.4.0

New Features
- Added support for swap on HECO, CELO, Optimism
- Added support for changing hardware wallet homescreen image and device name
- Added support for verifying the hardware firmware and Bluetooth firmware for OneKey Touch
- Added Status Log which you can export and send it to OneKey support team for debugging (Caution: Only send them to hi@onekey.so)

Bug Fixes
- Fixed some connection issue when using hardware wallet

---

3.3.0

New Features
- You can verify that the firmware on your hardware wallet is from OneKey
- You can set a peroid of time to operate your account without password after unlocking the app
- You can turn on / off the vibration in settings

Bug Fixes
- Fixed the issue that NFT is not muted during autoplay
- Fixed the issue that copy address on the hardware wallet accounts without confirming on the hardware wallet
- Fixed some issues when connecting with the hardware wallet

Improvements
- Improved UI styles

New Features
- Added chart in the token page

Bug Fixes
- Fixed the issue that modal didn’t close when the connection was timeouted

Improvements
- Improved transactions history list in BTC and some other chains
- Improved history list of swap
- Improved performance of loading quotes of fiats

New Features
- Support managing NFTs on Polygon Network
- Support for playing audio & video NFTs
- Support for iPad

Bug Fixes
- Fixed some issues on UIs

Improvements
- Improved performance of rendering UIs
- Improved performance of loading NFTs

New Features
- You can add your friends' address in address book and use them when sending tokens

Bug Fixes
- Fixed some hardware wallet connection issues

Improvements
- Improved various UI details

Bug Fixes
- Fixed the wording issues of in history list

Improvements
- Improved various UI details

New Features
- Cross-chain swap is now available, making it easier to transfer EVM assets to another EVM network
- Support for using Touch ID to unlock (on macOS)
- Support for sending and receiving Starcoin (STC)
- You can enter receive page and send page with the newly added floating action button

Bug Fixes
- Fixed the issue that couldn’t sign with the second account on dYdX
- Fixed the issue that the account list didn’t refresh after renaming watched accounts

Improvements
- Keep showing navigation bar when enter inner pages (on desktop)
- Clearer UI for sending token process
- Neater UI Color System

New Features
- You can buy or sell coins with fiat now
- You can choose your favorite Emoji for your wallets now

Bug Fixes
- Fixed some issues when using WalletConnect
- Fixed some UI issues when connecting hardware wallet
- Fixed some UI issues in “buy with fiat” feature

Improvements
- Improved UI of signing EVM messages

New Features
- Support for sending and receiving BTC

Bug Fixes
- Fixed the issue of keyboard couldn’t be closed after receiving a Touch ID / Face ID prompt (on iOS)
- Resolved an issue that caused crash after connecting to hardware wallet
- Fixed the issue that permission prompt didn’t pop up
- Fixed the issue of slide menu didn’t update in a timely manner after creating wallet

Improvements
- Added network filter for account list in the slide menu
- Improved OneKey Lite connection

New Features
- Support for managing Bitcoin accounts
- Support for sending and receiving NEAR network tokens
- Support for connecting WalletConnect with QR Code
- Neater app update and changelog dialog

Bug Fixes
- Resolved an issue that caused users couldn’t close dialog when visiting DApps
- Added a timeout message when reconnecting the connected hardware wallet

Improvements
- Improved button styles in swap

New Features
- Added haptic feedback. Optimization on bottom navigation. Added buttons hover and pressed feedback.
- Transaction fee support automatic refresh & local history display & EVM DAPP signature process.
- Support for Bluetooth connection with hardware wallets.
- Support checking for updates.

Bug Fixes
- The overlapping problem of the drop-down box components on the desktop app and the browser extension.
- Some Lottie animation autoplay and display issues.
- Fixed the detection of EVM fees, offer the correct feedback based on the time consuming of putting data on-chain.