OptiTools Mobile
Optidrive commisioning tool
Free
1.42for iPhone, iPod touch
6.9
2 Ratings
Invertek Drives Limited
Developer
63.4 MB
Size
Aug 10, 2023
Update Date
Productivity
Category
4+
Age Rating
Age Rating
OptiTools Mobile Screenshots
About OptiTools Mobile
OptiTools Mobile is an intuitive and easy-to-use Smartphone App which provides wireless configuration and monitoring of the Optidrive product range. Wireless operation is carried out via Bluetooth BLE and is available on any Optidrive when the OptiStickSmart is plugged into a drive or a drive network.
PARAMETER TRANSFER
Monitor and Edit individual Optidrive parameters in real-time or transfer complete parameter sets between an Optidrive and the Smartphone. Parameter sets can be send and received via Email and are fully compatible with OptiTools Studio PC software.
OPTIDRIVE MONITOR AND CONTROL
Monitor drive status, motor speed, motor current and motor power in real-time. When unlocked, the user can adjust motor speed, start the drive, stop the drive and reset trips from the Smartphone App.
PARAMETER TRANSFER
Monitor and Edit individual Optidrive parameters in real-time or transfer complete parameter sets between an Optidrive and the Smartphone. Parameter sets can be send and received via Email and are fully compatible with OptiTools Studio PC software.
OPTIDRIVE MONITOR AND CONTROL
Monitor drive status, motor speed, motor current and motor power in real-time. When unlocked, the user can adjust motor speed, start the drive, stop the drive and reset trips from the Smartphone App.
Show More
What's New in the Latest Version 1.42
Last updated on Aug 10, 2023
Old Versions
Bug fixes and improvements
Show More
Version History
1.42
Aug 10, 2023
Bug fixes and improvements
1.41
Aug 15, 2022
Bug fixes and improvements
1.40
Apr 26, 2022
Changes / improvements
• Changed way OTM compares parameter values to default. Now compares display values rather than internal values, matches OptiTools Studio.
Bug fixes
• Fixed IOS NFC bug where newer phones did not allow NFC comms correctly
• Fixed Coolvert parameter set handling, now supports new flag for Coolvert
• Fixed crashing issue where BLE comms sets task cancellation token that is already cancelled
• Fixed issue where opening invalid parameter file causes crash
• Fixed Parameter groups font colour not updating after parameter values changed to / from default
• Changed way OTM compares parameter values to default. Now compares display values rather than internal values, matches OptiTools Studio.
Bug fixes
• Fixed IOS NFC bug where newer phones did not allow NFC comms correctly
• Fixed Coolvert parameter set handling, now supports new flag for Coolvert
• Fixed crashing issue where BLE comms sets task cancellation token that is already cancelled
• Fixed issue where opening invalid parameter file causes crash
• Fixed Parameter groups font colour not updating after parameter values changed to / from default
1.39
Mar 9, 2022
Bug fixes and improvements
1.38
Jul 16, 2021
Fixed changing BLE pairing code issue
1.37
May 25, 2021
• Fixed PLC transfer from Optistick via Bluetooth
• Fixed reading HP P2 drives via NFC.
• Now shows 2dp correctly on Drive description parameter (P0-29 on E3)
• Fixed issue where keyboards were not selected correctly for editing parameters
• OTM will now automatically check for DDFS updates if the user is on WIFI.
• Fixed reading HP P2 drives via NFC.
• Now shows 2dp correctly on Drive description parameter (P0-29 on E3)
• Fixed issue where keyboards were not selected correctly for editing parameters
• OTM will now automatically check for DDFS updates if the user is on WIFI.
1.36
Sep 18, 2020
• Disabled Optistick smart updates via BLE
• Pre-release Optistick Smarts will now be blocked from operating, will now show an error
• Fixed crashing issue where OTM would crash after editing one parameter set after NFC read / BLE read / drive transfer
• Fixed off by one issue for writing E2 drive to NFC
• Fixed Issue with writing E3 HP drives to Optistick smart
• Pre-release Optistick Smarts will now be blocked from operating, will now show an error
• Fixed crashing issue where OTM would crash after editing one parameter set after NFC read / BLE read / drive transfer
• Fixed off by one issue for writing E2 drive to NFC
• Fixed Issue with writing E3 HP drives to Optistick smart
1.35
May 11, 2020
Fixed issue with virtual drive creation
1.34
May 6, 2020
•Fixed issue with creating parameter sets where power rating is not an integer
•Fixed issue where not selecting virtual drive parameters and clicking button to create crashed application
•Now writes PLC data to drive before parameter set on transfer data page
•Fixed inconsistent third-party list item, depending on phone screen size the list item would render differently
•Fixed issue where not selecting virtual drive parameters and clicking button to create crashed application
•Now writes PLC data to drive before parameter set on transfer data page
•Fixed inconsistent third-party list item, depending on phone screen size the list item would render differently
1.33
Dec 19, 2019
•Fixed issue where app could crash when user changes E3 drive name.
•None integer drive addresses now don’t crash the app
•Fixed issue with C2 parameter sets not being transferred correctly
•Can now see Optisticks which have been paired
•General bug fixes and code maintenance.
•Users can now change BLE Pairing code (default is 000000)
Current pairing key can be seen in NFC screen
•Remote Optistick unlock is now supported when pairing is used to connect.
•Added new Optistick settings screen which has:
Change name
Change / add pin code
Erase pin code
Set Optistick in firmware upgrade mode
•Can now write NFC (if on IOS 13+)
•Fixed notch display issues
•Drive trip status is now updated when scanning for drives
•Default filenames will now have firmware version to two decimal places
•Dropped support for iPhone 5
•None integer drive addresses now don’t crash the app
•Fixed issue with C2 parameter sets not being transferred correctly
•Can now see Optisticks which have been paired
•General bug fixes and code maintenance.
•Users can now change BLE Pairing code (default is 000000)
Current pairing key can be seen in NFC screen
•Remote Optistick unlock is now supported when pairing is used to connect.
•Added new Optistick settings screen which has:
Change name
Change / add pin code
Erase pin code
Set Optistick in firmware upgrade mode
•Can now write NFC (if on IOS 13+)
•Fixed notch display issues
•Drive trip status is now updated when scanning for drives
•Default filenames will now have firmware version to two decimal places
•Dropped support for iPhone 5
1.32
Nov 26, 2018
Old HVAC drive will be have the same parameter group names as Eco
Now backs out if the user doesn’t want to turn BT on
Fixed IOS visual bug for BLE transfer screen
Reorganised virtual drive screen
Changed minimum stick version from svn 181 to svn 206
Firmware updates are better handled now, and prompt the user that there is an update available
Now backs out if the user doesn’t want to turn BT on
Fixed IOS visual bug for BLE transfer screen
Reorganised virtual drive screen
Changed minimum stick version from svn 181 to svn 206
Firmware updates are better handled now, and prompt the user that there is an update available
1.31
Sep 19, 2018
•About screen reworked
•Added support screen with links to drive and Optistick smart manuals
•Added settings screen
•Select different keyboards depending on users keyboard settings
•Virtual drive creator: removed redundant output phase selection
•New file manager with
oImproved sharing capabilities
oMultiple file selection allowing:
-Bulk Delete
-Bulk File Share
•Improved German translations
•Current parameter value is now shown as a placeholder in the parameter edit popup
•File system structure updated
•Shortened file manager title so it fits on more screens
•Users are now prompted to save their changes to parameter files before they go back to the previous page
•NFC header now shows short name of the Optistick when minimized
•Added support screen with links to drive and Optistick smart manuals
•Added settings screen
•Select different keyboards depending on users keyboard settings
•Virtual drive creator: removed redundant output phase selection
•New file manager with
oImproved sharing capabilities
oMultiple file selection allowing:
-Bulk Delete
-Bulk File Share
•Improved German translations
•Current parameter value is now shown as a placeholder in the parameter edit popup
•File system structure updated
•Shortened file manager title so it fits on more screens
•Users are now prompted to save their changes to parameter files before they go back to the previous page
•NFC header now shows short name of the Optistick when minimized
1.30
Jul 16, 2018
DDFs and Optistick firmware files are now downloadable.
Added third party plugins screen
updated minimum Optistick firmware version the app will work with
NFC transfer screen now shows where to place the stick on the phone.
Added third party plugins screen
updated minimum Optistick firmware version the app will work with
NFC transfer screen now shows where to place the stick on the phone.
1.29
May 31, 2018
Added support for:
•P2-Eco V2.30
•Eco V2.30
•P2 Solar V2.30
•C2 PFC v2.02
Included are:
•Drive header minimise status is remembered when changing screen
•Parameter default is now shown correctly when P1-09 is changed
•Optitools file manager is now available through the Apple file app
•P2-Eco V2.30
•Eco V2.30
•P2 Solar V2.30
•C2 PFC v2.02
Included are:
•Drive header minimise status is remembered when changing screen
•Parameter default is now shown correctly when P1-09 is changed
•Optitools file manager is now available through the Apple file app
1.28
May 15, 2018
•Fixed issue where tips were always shown in English
•Fixed issue where P-10 being changed didn't update the DP of parameter P-01 + P-02
•Transferring data to/from the drive/Optistick now gives the user feedback
•Fixed issue where changing P-14 to 201 didn't show parameters P-51 and above
•Parameter default scaling now matches OTS
•Fixed issue where P-10 being changed didn't update the DP of parameter P-01 + P-02
•Transferring data to/from the drive/Optistick now gives the user feedback
•Fixed issue where changing P-14 to 201 didn't show parameters P-51 and above
•Parameter default scaling now matches OTS
1.0
Apr 18, 2018
OptiTools Mobile FAQ
Click here to learn how to download OptiTools Mobile in restricted country or region.
Check the following list to see the minimum requirements of OptiTools Mobile.
iPhone
Requires iOS 11 or later.
iPod touch
Requires iOS 11 or later.
OptiTools Mobile supports English, Czech, Danish, Dutch, German, Polish, Portuguese, Russian, Simplified Chinese, Swedish
