5.7.2
2023-05-03
Update DXF file to use DXF points for AB point instead of circles.
Correct HTML report file for liners to use the correct "Series" heading for the liner pattern instead of using the "Material" heading.
Minor fixes and improvements.
5.6.2
2022-03-15
Enable complexity setting for rectangle and oval pools. This allows these projects to use AB measurements for interior features as well as to flip "+out" points to place the point inside the pool instead.
Added a "insert point" command for voice recognition to allow a new point to be created and inserted after the current point.
The deep end view for rectangle and oval liner plots is now on the left side of the plot instead of the right side.
The process type (quote vs order) is now included in the email subject heading.
Fix an issue with bounding box calculations for the plot that, on rare occasion, could result in the app hanging.
Minor fixes and improvements.
5.5.1
2021-06-20
Fix for issue that could result in a hang during startup on iOS 14.6.
Minor fixes and improvements.
5.3.2
2020-10-13
Added voice command: "add label [label name]" to allow for addition of point labels through voice recognition.
Enabled voice recognition for rectangular and oval pool measurements.
Fixed case where the Bluetooth headset control status was not correctly shown in the preferences.
Updated voice recognition parser to allow leading (and ignored) words to have apostrophes in them.
Some behind the scenes changes.
Minor fixes and improvements.
5.3.1
2020-06-24
Fixed an instance where the Anchors feature was not always created for free-form replacement safety covers.
Now validates that email addresses are properly formed.
Added a button for the preferences to the bottom of the Home screen.
Added more information to the dialog message if the sending of a project was not able to complete.
Warning dialog messages are now more clear on which information is missing from a user or distributor profile.
Some behind the scenes changes.
Minor fixes and improvements.
5.2.1
2020-03-19
Minor fixes and improvements.
5.1.1
2019-06-18
Added all-A then all-B mode for the Measure screen. This makes entering data a little simpler for users that prefer to measure all of the A's followed by all of the B's.
Added bead type for Lock-In/Beaded covers.
Improved voice recognition parsing to allow up to five words prior to the "measure" and "go" keywords.
Minor fixes and improvements.
5.0.4
2019-06-01
Fix to speech output not working if voice recognition is not available.
Minor fixes and improvements.
5.0.2
2019-05-02
Minor bug fix.
5.0.1
2019-05-01
Added voice recognition for measurement values. Available via in-app purchase.
Added speech output for measurement values.
Added ability to use geolocation to determine user and customer addresses.
Changed menu and help buttons in the header bar to be cleaner round buttons.
Added A-B length to first page of HTML report.
Fixed an exception due to loss of name for AB reference.
Added customer email address for a project.
Minor fixes and improvements.
4.1.5
2018-11-07
Fixed issue that prevented the sending of projects for some users.
Minor fixes and improvements.
4.1.3
2018-08-19
Fixed an issue where extra numbers were entered if the keypad numbers were typed too fast.
Fix to an exception that occurred when sending the TXT report for a metric project.
Minor fixes and improvements.
4.1.2
2018-08-01
Minor fixes and improvements.
4.1.0
2018-04-25
Added support for height/depth measurements for complex freeform projects.
Turn on height measurements in Advanced Properties section of the Feature Properties screen.
Increased the plot size on the Measurement screen for some iPhone screen sizes.
Fixed image filenames when copying a project that has images.
Fixed crash on rectangle covers created by copying a rectangle liner.
Added ability to add a point from the Point Properties screen.
Added help information for the Copy Project screen.
Fixed error when sending projects from devices still on iOS 9.
Minor fixes and improvements.
4.0.1
2018-03-21
Changed how the pool's overall width and length are calculated. The new method is better able to align the length and width with the pool's shape.
Changed how the pool plot is included in the email message to work around email clients that truncate the email and corrupt the plot.
Changed plot legend to contain the color names when printed.
Minor fixes and improvements.
4.0.0
2018-03-02
Added support for complex freeform pool projects to allow for the measurement of larger pools and for easier measurement of features within the pool perimeter. Complex project allow for additional reference lines and the use of points other than the A and B points such as perimeter points, as reference points.
Restructured the Preferences screen to allow for better groupings of the controls.
Added a text description to features, steps, etc.
Added support for multiple user and distributor identities.
Improved layout of the point data display in the Measurements screen for small screens in landscape mode.
Some adjustments to font sizes used on the plots to improve clarity.
Fixed missing "Other" collection from the liner patterns and cover materials.
When printing the HTML report, fixed an instance where a heading could be printed on a separate page from its data.
Added preferences settings for default liner and cover material collections, to enable/disable swipe gestures, and to allow pictures to also be saved to the camera roll/photo gallery.
Added user and distributor information to JSON report files.
Some changes to the XML file format. Requires software that reads these files to be updated.
Minor fixes and improvements.
3.9.4
2017-05-08
Minor fixes and enhancements.
3.9.3
2017-04-27
Fixed issue where some warnings were not being shown.
Improved layout of the point data display in the Measurements screen for small screens in landscape mode.
Slightly decreased the size of the names of steps, break lines, and cross pool measurements on the plots.
Minor fixes and improvements.
3.9.1
2017-03-25
Fix to feature creation from Measurements screen to show the proper properties screen.
Now plots the names of steps, break lines, and cross pool measurements.
Improvements to the Measurements screen for non-AB points.
Minor enhancements to the XML report.
Minor fixes and improvements.
3.9.0
2017-03-04
Added ability to measure a pool for both a liner and a cover. Use the copy button on the Info screen to copy a completed project and change its type.
Added the length and width values for steps and cross pool measurements to the Measurements screen below the point inputs. This should be a more convenient location than just existing on the step and cross pool measurement properties screens.
Allow the text to go smaller on the plots for smaller devices. Looks a lot cleaner but the font is much smaller.
Fix to DXF report file to remove the line thicknesses.
Fix to copy feature operation where the number of copied points could be incorrect.
Fix to HTML report file for accented French characters, etc.
Fixed a timing issue where stale data could be saved for project features such as break lines and steps. Primarily affects the example projects.
Make sure that the highlighted point remains visible for large metric plots.
Replaced the TXT file format with an XML file format.
Fixed rare instance where the source points for features, break lines, or steps could not be selected.
Fixed loading of metric example projects.
Minor improvement on label placement for metric project plots.
Minor fixes and improvements.
3.8.0
2016-12-03
Minor fixes and enhancements.
3.7.3
2016-11-17
Performance improvements in the tracking of project data.
Fixed an instance where pictures for a project were no longer available.
When adding an image to a project, it now checks to be sure that the chosen filename does not already exist.
Fixed case where the app didn't return to the Review screen after sending a project.
Now uses a secure connection when sending projects.
Minor fixes and improvements.
3.7.2
2016-09-29
Added a UUID to each project to assist with tracking projects through fabrication.
Minor fixes and improvements.
3.7.1
2016-07-07
No longer allows the deletion of any feature, break line, step, etc that contains points referenced by other points.
The point properties page now lists any points that are known to reference the displayed point.
Several improvements in the tracking of point references.
Minor fixes and improvements.
3.7.0
2016-06-29
Some reformatting of the HTML report so that it prints out in a fewer number of pages.
Moved warnings to just below the description/comments in the HTML report file to make them more visible.
Reduced the height of the pool plot in the HTML report file for rectangle and oval projects.
Added the number of project errors and warnings to the project information in the DXF files.
Minor fixes and improvements.
3.6.5
2016-05-01
Added warning if corner size is too small for rectangular pools.
Fixed update of the points list on the measurements page if a point's label is changed.
Now shortens long feature names before displaying them in the measurements page's point data display.
Updated some liner patterns.
Minor fixes and improvements.
3.6.4
2016-04-14
Updated some liner patterns.
Minor fixes and improvements.
3.6.2
2016-04-06
Fixed issue where the progress dialog was being closed too early when sending projects.
Minor fixes and improvements.
3.6.0
2016-03-23
Added a symbol on the projects page to indicate which projects have been exported, sent for a quote, or ordered.
Improved the layout of the Measurements page for larger screen sizes.
Internal changes to handling of in-app purchases.
Improved support for the iPad Pro. Now takes better advantage of the larger screen size.
Improvements to reduce the amount of time required to show the liner patterns or cover materials page.
Updated the lists of available liner patterns.
Minor fixes and improvements.
3.5.7
2015-11-25
Improved handling of projects without a project name.
Minor fixes and improvements.
3.5.3
2015-09-11
Fix to the help information for liner bead color.
Minor improvement to handling of the preferred vendors list.
Minor fixes and improvements.
3.5.2
2015-09-02
Now restricts the sizes of pictures to reduce transfer time and fix a potential issue with large pictures.
Added blue to as a supported liner bead color.
3.5.1
2015-08-07
No longer shows the feature type input for steps, cross pool measurement or break line property screens.