Sound Level Analyzer
サウンドレベル・騒音測定ツール
$6.99
7.0for iPhone
Age Rating
Sound Level Analyzer Screenshots
About Sound Level Analyzer
"Sound Level Analyzer" is sound level meter and sound analysis tools for iPhone.
Available in variety of applications as the neighboring environmental noise measurement, audio system check, vehicle interior noise check, sound check of live events, and more.
"Sound Level Analyzer" has additional analysis modes, which are time graph, frequency real-time analyzer (RTA) and FFT analyzer. It can be used to analyze the characteristics for the sound/noise source.
Features:
# Measurement function
Main (Leq) : Sound level measurement (real-time display)
- Sound level measurement (dB): Leq (equivalent noise level), Min (minimum value), Max (maximum value), Avg (time average equivalent noise level)
- Frequency weighting correction characteristics : A (for noise level meter), C (for sound level measurement), Z (no correction)
- Time weighting characteristics : Fast = 0.125 sec, Slow = 1.0 sec
Power Spectrum (P.S.) : View of frequency spectrum analysis (real time display)
- Spectrum analyzer function : FFT analysis, 1/3-octave band response analysis.
- FFT frequency range settings : 100Hz - 20kHz (FFT all) / 100Hz - 3kHz / 3k - 6kHz
- Measured value display function in 1/3 oct band response analysis. (OctVal)
- Power spectrum display function at the time of occurrence of Max. (Display Max)
# Control function
- Calibration function : level correction value setting, -20 to +20dB
- Measurement timer function : 1 minute / 5 minutes / 10 minutes / 15 minutes / 20 minutes / 30 minutes / 1 hours
- Snapshot (Snap) : Save measurement display with time stamp to Photos.
Applications:
- Live Sound
- Environmental noise measurement
- Installation of audio equipment
- Tuning of audio equipment
- Architectural acoustics
- Broadcast
- Device management
Example of the noise level situation:
- 130dB : Engine sound of Airplane
- 110dB : Horn of Car
- 100dB : Noise of passing train
- 90dB : In loud factory
- 80dB : In the train, Vacuum cleaner
- 70dB : Noisy office, Noisy street
- 60dB : Quiet Car, Normal conversation
- 50dB : Quiet office
- 40dB : In the library, Quiet residential area
- 30dB : Outskirts of midnight, Whisper
- 20dB : Sounds of rubbing leaves
Note: At the time of the first access to Microphone and Photos after installing the app, you will be asked authorization to access them by the iOS system. If you have not enabled this setting, the app can not access them by privacy restrictions of the iOS system. Please enable the access permission on the iOS setting, "Settings > Privacy > Photos or Microphone".
Please visit our iOS app support page for more information on this app.
Available in variety of applications as the neighboring environmental noise measurement, audio system check, vehicle interior noise check, sound check of live events, and more.
"Sound Level Analyzer" has additional analysis modes, which are time graph, frequency real-time analyzer (RTA) and FFT analyzer. It can be used to analyze the characteristics for the sound/noise source.
Features:
# Measurement function
Main (Leq) : Sound level measurement (real-time display)
- Sound level measurement (dB): Leq (equivalent noise level), Min (minimum value), Max (maximum value), Avg (time average equivalent noise level)
- Frequency weighting correction characteristics : A (for noise level meter), C (for sound level measurement), Z (no correction)
- Time weighting characteristics : Fast = 0.125 sec, Slow = 1.0 sec
Power Spectrum (P.S.) : View of frequency spectrum analysis (real time display)
- Spectrum analyzer function : FFT analysis, 1/3-octave band response analysis.
- FFT frequency range settings : 100Hz - 20kHz (FFT all) / 100Hz - 3kHz / 3k - 6kHz
- Measured value display function in 1/3 oct band response analysis. (OctVal)
- Power spectrum display function at the time of occurrence of Max. (Display Max)
# Control function
- Calibration function : level correction value setting, -20 to +20dB
- Measurement timer function : 1 minute / 5 minutes / 10 minutes / 15 minutes / 20 minutes / 30 minutes / 1 hours
- Snapshot (Snap) : Save measurement display with time stamp to Photos.
Applications:
- Live Sound
- Environmental noise measurement
- Installation of audio equipment
- Tuning of audio equipment
- Architectural acoustics
- Broadcast
- Device management
Example of the noise level situation:
- 130dB : Engine sound of Airplane
- 110dB : Horn of Car
- 100dB : Noise of passing train
- 90dB : In loud factory
- 80dB : In the train, Vacuum cleaner
- 70dB : Noisy office, Noisy street
- 60dB : Quiet Car, Normal conversation
- 50dB : Quiet office
- 40dB : In the library, Quiet residential area
- 30dB : Outskirts of midnight, Whisper
- 20dB : Sounds of rubbing leaves
Note: At the time of the first access to Microphone and Photos after installing the app, you will be asked authorization to access them by the iOS system. If you have not enabled this setting, the app can not access them by privacy restrictions of the iOS system. Please enable the access permission on the iOS setting, "Settings > Privacy > Photos or Microphone".
Please visit our iOS app support page for more information on this app.
Show More
What's New in the Latest Version 7.0
Last updated on Sep 30, 2023
Old Versions
- Improved internal processing and performance.
- Changed the display position of the occurrence time and the maximum level in "Display Max" at P.S. mode.
- Requires iOS 16.6 or later.
- Changed the display position of the occurrence time and the maximum level in "Display Max" at P.S. mode.
- Requires iOS 16.6 or later.
Show More
Version History
7.0
Sep 30, 2023
- Improved internal processing and performance.
- Changed the display position of the occurrence time and the maximum level in "Display Max" at P.S. mode.
- Requires iOS 16.6 or later.
- Changed the display position of the occurrence time and the maximum level in "Display Max" at P.S. mode.
- Requires iOS 16.6 or later.
6.0
Oct 5, 2022
- Improved internal processing and performance.
- Renewed UI design.
- Requires iOS 15.0 or later.
- Renewed UI design.
- Requires iOS 15.0 or later.
5.0.1
Nov 6, 2021
- Replaced a screenshot on the AppStore.
5.0
Nov 3, 2021
- Minor improvements.
- Requires iOS15.0 or later.
- Requires iOS15.0 or later.
4.2
Feb 17, 2021
- Minor improvements.
- Requires iOS12.5 or later.
- Requires iOS12.5 or later.
4.1
Nov 4, 2020
- Minor improvements.
4.0
May 18, 2020
- Partially changed the FFT frequency display range to match the frequency with high audibility.
- Added processing to prevent erroneous operation during measurement.
- Minor improvement.
- Requires iOS12.4 or later.
- Added processing to prevent erroneous operation during measurement.
- Minor improvement.
- Requires iOS12.4 or later.
3.1
Apr 2, 2019
- Add the measured value display function in 1/3 oct band response analysis.
- Minor improvement.
- Requires iOS12.2 or later.
- Minor improvement.
- Requires iOS12.2 or later.
3.0
Nov 13, 2018
- Changed UI.
- Minor bug fixes and minor improvements.
- Requires iOS12.1 or later.
- Minor bug fixes and minor improvements.
- Requires iOS12.1 or later.
2.3
May 17, 2017
"Sound Level Analyzer" has received the best rating as sound level measurement app in the research paper of the academic journal "Applied Acoustics". (Paper: ”Testing the accuracy of smartphones and sound level meter applications for measuring environmental noise”, Enda Murphy, Eoin A. King ; Applied Acoustics 106(2016)16-22.)
- Minor bug fixed.
- Performance Improvement.
- Requires iOS10.3 or later.
- Minor bug fixed.
- Performance Improvement.
- Requires iOS10.3 or later.
2.2
Mar 24, 2017
- Optimized the code.
- Changed the screen design.
- Requires iOS10.2 or later.
- Changed the screen design.
- Requires iOS10.2 or later.
2.1
Mar 5, 2016
Achieved over 100,000 downloads, "Sound Level Analyzer / Lite", #1 sound level meter app for iPhone !
- Changed the screen design.
- Requires iOS9.2 or later.
- Changed the screen design.
- Requires iOS9.2 or later.
2.0
Dec 12, 2015
- Add the display function of the long-term average equivalent noise level.
- Code optimization.
- Code optimization.
1.3
May 28, 2015
- Support for the background operation.
- Code optimization.
- Code optimization.
1.2
Mar 25, 2015
- Supported iOS8.
- Code optimization.
- Changed screen design.
- Code optimization.
- Changed screen design.
1.1
Sep 3, 2014
- Slight adjustment of the reference level.
If you enjoy using the app, please take a minute to leave a positive review. This really helps and keeps us motivating to work on new updates !
If you enjoy using the app, please take a minute to leave a positive review. This really helps and keeps us motivating to work on new updates !
1.0
Jun 9, 2014
Sound Level Analyzer FAQ
Sound Level Analyzer is available in regions other than the following restricted countries:
China,Russia,Belarus,South Korea,Hong Kong
Sound Level Analyzer supports English
Click here to learn how to download Sound Level Analyzer in restricted country or region.
Check the following list to see the minimum requirements of Sound Level Analyzer.
iPhone
Requires iOS 16.6 or later.
Related Videos
Latest introduction video of Sound Level Analyzer on iPhone
