8.3
2022-10-07
1) A few users have experienced data issues with Boost and Throttle position on the S7 fixed stream. This was due to a change where the MAP1 and TPS1 was changed to use MAPMAX and TPSMAX to cover all sensors on the ECU.
2) Other bug fixes have been carried out to improve data ratio of valid data and also to increase speed.
8.1
2022-07-05
1) Fix to an issue with screens in settings only showing 1 screen and not full list.
2) Fix to any restricted features within the app. Everything should be unlocked as normal again.
6.23
2020-09-11
Added in a new switch to turn Auto Stream detection on / off. If using CAN Echo then set the switch to OFF in Settings -> General.
If using CAN Echo on an S7 ecu then again set the switch to OFF and also in SCal set frames 21-40 Frame frequency to UNUSED to increase performance in the app.
6.3
2019-12-18
Added 8 new inputs to support KT8_1 to KT8_8.
6.2
2019-11-10
v6.2 patch:
1) Adjustment to the Auto Startup Dashes - Recommended update for users.
2) iPhone 11 Pro Max and iPhone 6 Plus fix for screen layout issues.
v6.1 patch:
1) New Search feature to make it easier and quicker to find inputs on the Quick Setup screen and also changing gauges / indicators in the dashes
2) Fixed Indicator position in SP3 dash when changing Indicators
v6.0:
1) New Home screen menu look and feel
2) New feature to load into last used dash on startups
3) New slick looking theme throughout the app
4) Performance screen altered to give a fresher look and feel
5) Fix to reset switches back to previously selected position on bluetooth reconnection or module restart
6.1
2019-11-08
v6.1 patch:
1) New Search feature to make it easier and quicker to find inputs on the Quick Setup screen and also changing gauges / indicators in the dashes
2) Fixed Indicator position in SP3 dash when changing Indicators
v6.0:
1) New Home screen menu look and feel
2) New feature to load into last used dash on startups
3) New slick looking theme throughout the app
4) Performance screen altered to give a fresher look and feel
5) Fix to reset switches back to previously selected position on bluetooth reconnection or module restart
6.0
2019-11-04
1) New Home screen menu look and feel
2) New feature to load into last used dash on startups
3) New slick looking theme throughout the app
4) Performance screen altered to give a fresher look and feel
5) Fix to reset switches back to previously selected position on bluetooth reconnection or module restart
5.1
2019-10-14
1) New SP3 Dash
2) New SP4 Dash
3) Performance improvements
4) Bug Fixes
5.0
2019-10-02
1) Important bug fix to allow iOS 13 to continue to run without crashing - (further iOS 13 updates are in progress but this version should stop the crash and additional updates will come after)
2) New SP2 dash
3) New S7 support for 40 frames along with S7 default frame contents option
4) Additional bug fixes and improvements
4.5
2019-05-07
1) CALSWITCH (Calibration) gauge as it did not show Cal 1 when selected
2) TCSWITCH (Traction control) gauge as it did not show Cal 1 when selected
3) Added AirConSwitch input (Same type as ALS and LC)
4) Added AirConCtrl input (Same type as ALS and LC)
5) Altered touch area on the indicators e.g. LC / ALS to make selecting easier
4.3
2019-03-14
1) CAL Switch Gauge displaying the selected CAL as + 1
2) TC Switch Gauge displaying the selected TC as + 1
3) N2OP_BAR and N2OP_PSI alarms fixed
4.2
2019-02-23
1) Improved Switch changing (Cal & TC) between app and Bluetooth module as module did not always receive the change.
2) General improvements and maintenance.
4.1
2019-01-08
*IMPORTANT UPDATE RECOMMENDED! - due to point 1 below.
1) Correction to reading all slot 3's data as the incorrect value was being extracted causing incorrect values to be converted and used throughout the app.
2) Brand New Performance system including a brand new Drag Tree.
3) Tune up for when sending Switch commands to bluetooth device.
4) Fix crash on iPad when sharing Data Logs
5) General backend improvements and maintenance.
4.0
2018-10-15
1) Massive upgrade to the BT Connection to optimise the stability and speed ... HUGE IMPROVEMENT!
2) A new Dash called SP1 - Clean dark style dash
3) New Data logging system that allows Data log files to be shared and viewed via the Syvecs SView software from the app.
4) General maintenance of the app along with backend process improvements
This upgraded is highly recommended for all uses !!! ... Enjoy...
3.0
2018-07-18
1) Has a whole new look and feel for the official go live.
2) Fixed issue with screens on Performance and Race Stats screen where screens go blank after changing screens.
3) General maintenance and performance tune ups.
2.8
2018-04-18
1) Altered IAP Process and Promo Code logging.
2.7
2018-04-13
1) Additional Tune-ups and performance changes.
2) Fix to PRP1 Input.
2.6
2018-04-06
1) Performance enhancements.
2.5
2018-03-22
A number of Tune-ups and alterations to improve the performance, speed and memory management.
2.4
2018-03-17
1) Fixed EOP1_PSI (Oil Pressure) reading as part of the calculation was reading in millibar before converting to PSI
2) Fixed EOP1_BAR (Oil Pressure) reading as it was reading in millibar
3) Fixed PRP1_PSI (Post Restrictor) reading as part of the calculation was reading in millibar before converting to PSI
4) Fixed PRP1_BAR (Post Restrictor) reading as it was reading in millibar
5) Added a fix in for Alarm Warnings activating
6) Added alterations to try help performance
2.3
2018-03-09
1) Bug Fixe Release
2.2
2018-02-17
1) Added double tap of indicators to show the linked status description e.g. LIMPMODE can show ect cold.
2) Minor internal changes
2.1
2018-02-02
1) Backend changes to allow faster alterations of gauges / inputs.
2) New Promo Code system to offer more promotions.
3) Alterations to some of the gauge inputs.
4) Added 60-120mph / kph time to the performance system.
5) New option in general settings to allow music streaming on v2 modules.
6) Added screen sleep override to force screen to stay awake while in the app.
7) Added continuous scrolling on the gauges screen when swiping left / right.
2.0
2017-12-23
A HUGE update has been getting carried to Syvecs Pro. This includes:-
1) Updates and bug fixes to the original version. This includes support for iPhone X and also Swift 4.
2) Performance tune ups
3) The all new upgrade to include dashboards for you to use. In this release includes 2 fully customisable dashboards and are completely FREE for the users to use.
4) New look and feel of the large gauges
5) All new indicators styles e.g. LC and ALS now have icons
6) Full Warning and Alarm system, this has changed from checking gauges that are displayed on the screen, to now checking every gauge that has alarms set on by the user.
7) Over 150 inputs (Gauges and indicators) have been added to the app to allow the app to be amazing to display huge amounts of data for the user.
7) Iphone X update to support full screen
8) Added quick change feature to the gauges and indicators. Users can now press and hold any gauge and indicator to change.
9) Double tap a gauge to display its large gauge
New gestures ...
1) To changed gauges and Indicators, press and hold them down to display a popup. Simply select the new gauge from the list and all the configuration will automatically be updated.
2) Double Tap a gauge to display its large gauge.
1.2
2017-09-30
1) Added a new Quick Setup screen to allow users to quickly setup the inputs to match Scal Frame Content.
2) Fixed an issue where the Screens Settings menu refreshed back to screen 1 after each input changed.
3) Fixed the Oil Pressure "bar" gauge as when displayed on the screen it had psi as the description.
4) Changed the settings menu so its easier to get to from the main screen.
5) Removed Record Screen option due to a Bug with the Apple firmware. We decided to remove this due to iOS 11 having a record screen feature now added.
1.1
2017-09-26
1) Fixed issue with Shift Light where it had to have rpm in frame 1 slot 1 to work.
2) Redesigned new Large Gauges
3) Allowed users to select mph or kmh for both performance screen and Race Stats screen
4) Added master reset button to restore all settings back to default
5) Added Max Marker reset option in (In the Large gauges)
6) in the background, a new update process has been added to update configuration without overwriting current custom settings e.g. frames / slots, alarms etc.