4.4.4
2024-03-20
- Added an option for landing in icing conditions when OAT less than 0 C with LDG flaps.
- Added warning about takeoff roll increase by up to 3X in slippery conditions.
- Added a choice of flaps TO or UP for takeoff.
- Updated to TBM 960 POH E0R5.
- Fixed error in LOW VOLTAGE procedure in 900 series.
- Allow upgrade to GWX radar in legacy aircraft.
- Updated the airport database.
4.3.16
2023-10-05
- Fixed displaying help on medium-sized devices with a tabbed interface.
- Updated the airport database.
4.3.15
2023-07-10
- Improved error messages on the Departure Procedure page.
- Fixed a bug that retrieved old METAR data.
- Updated the airport database.
4.3.14
2023-05-01
- Updated for TBM 960 PIM Edition 0, Revision 4.
- Updated the airport database.
4.3.13
2023-03-01
- Fixed the Enroute page help description of alternate reserves.
- Fixed the TBM 960 serial number range.
- Updated the airport database.
4.3.0
2022-03-22
- Added automatic estimate of enroute winds for the continental US.
- Converted to display of advisory panel for emergency procedures on 700 and 850L model aircraft.
- Added chip detector option on 700 and 850L model aircraft.
- Added enroute winds to Quick Setup page when manual entry is required.
- Rationalized manual overrides with Man/Auto selector.
- Fixed scope view legend on Radar page.
- Updated the airport database.
4.2.6
2021-12-09
- Added radar beam calibration parameters to the Aircraft page.
- Added a heavy pattern where the weather beam intersects the ground in the Scope view on the Radar page.
- Updated the airport database.
4.2.4
2021-08-28
Fixed the feedback button on the Settings page.
4.1.9
2020-12-09
- Fixed formating bug in glide.
- Updated airport database.
4.1.6
2020-09-25
- Fixed a bug in the amplified 900 and 930 after engine start procedure.
- Updated the airport database.
4.1.2
2020-07-04
- Fix a bug on Flight Performance page where the trip name goes blank after selecting a trip.
- Adjust JetA fuel density to 6.7 lbs/gal.
- Limit Vs2g to >= 100 KIAS.
Recent new features:
- Updated data and procedures for new PIM revisions for 850G and 9XX.
- Added Vo, the operating maneuvering speed to the Departure, Enroute, and Destination pages.
4.1.1
2020-05-01
- Added Vo, the operating maneuvering speed to the Departure, Enroute, and Destination pages.
- Fixed a bug in layout on startup.
4.0.4
2020-03-26
Update the airport database.
4.0.2
2020-01-30
- Allow manual input of landing fuel.
- Update the airport database.
Recent new features:
- Add Flight Performance page to phones.
4.0.1
2020-01-07
- Fix bug in airports for which the true heading of a runway is not published.
- Fix bug on the Memory Items page.
- Update the airport database.
Recent new features:
- Add Flight Performance page to phones.
4.0.0
2019-12-20
- Add the Flight Performance page to phones.
- Simplify the Flight Performance page.
- Add average headwind/tailwind input on the Flight Performance page.
- Add setting wind direction in true or magnetic north on the Departure and Destination pages.
- Add computing exact departure and destination runway magnetic heading when possible.
- Enhance beams on the Radar page.
3.5.14
2019-11-10
- Removed "CHK AT - NO FMS" CAS messages in TBM 940 per Revision 1.
3.5.13
2019-11-06
- Airport database prefers ourairports.com over NFDC for non-US airports.
- Airport database allows runways with unspecified reciprocal end elevation.
3.5.12
2019-10-25
- Updated 940 to PIM Edition 0, Revision 1.
- Fixed bug in landing distance with flaps UP or TO.
- Fixed bug in showing cold weather adjustment on the approach procedures page.
- Fixed bug in showing some procedures.
- Updated airport database.
2.5.11
2019-09-26
Fix Memory Items page.
3.5.10
2019-09-17
Add autoplay for spoken Normal procedures checklists.
3.5.9
2019-09-03
- Remember checklist speech setting on each device.
- Improved Help and tips to better explain safe TORA, safe LDA,
and safe obstacle clearance distance.
- Updated airport database
3.5.8
2019-07-31
- Added 940 and Edition 1 910.
- Added more G1000, G100Nxi, and G3000 annunciations to procedures.
- Fixed bug on Enroute page with Bleed HI.
- Use two-column layout on wide displays.
- Updated airport database.
3.5.7
2019-06-27
- Allow Flight Performance page on smaller views.
3.5.6
2019-06-01
- Fixed layout issue in landscape orientation on older iPads.
Recent new features:
- Added required fuel to Weight and Balance page.
- Added fuel and payload weights to Weight and Balance diagram.
- Added maximum additional payload weight to Weight and Balance page.
- Added gust to runway wind components diagram and show all relevant components for variable winds.
- Changed checklist indentation.
3.5.5
2019-05-28
- Added required fuel to Weight and Balance page.
- Added fuel and payload weights to Weight and Balance diagram.
- Added maximum additional payload weight to Weight and Balance page.
- Added gust to runway wind components diagram and show all relevant components for variable winds.
- Changed checklist indentation.
- Improved Trouble Reports.
- Fixed app layout issue on large iPad Pro.
- Fixed fullscreen webapp to reflect iOS safe areas.
- Update airport database.
3.5.4
2019-05-27
- Added required fuel to Weight and Balance page.
- Added fuel and payload weights to Weight and Balance diagram.
- Added maximum additional payload weight to Weight and Balance page.
- Added gust to runway wind components diagram and show all relevant components for variable winds.
- Changed checklist indentation.
- Improved Trouble Reports.
- Fixed app layout issue on large iPad Pro.
- Fixed fullscreen webapp to reflect iOS safe areas.
3.5.3
2019-04-19
- Added intermediate cruise data to TBM 700.
- Corrected cruise TAS on 9XX with radar.
- Corrected cold weather adjustment to be in line with AIM procedures.
3.5.2
2013-05-10
- Improved gathering of nearby Metars.
- Allow performance calculations for extreme cold conditions.
- Fix bug in 850G Elite aircraft with forward facing middle seats.
Recent new features:
- Added turf, dirt and gravel runways to airport database.
- Added slope adjustment for landing runways.
3.5.1
2019-02-20
- Fixed bug that computed incorrect maximum on converted units.
- Added red warning when maximum crosswind is exceeded.
Recent new features:
- Added turf, dirt and gravel runways to airport database.
3.5.0
2019-02-09
- Add turf, dirt and gravel runways to airport database.
- Add slope adjustment for landing runways.
- Fix bug that caused erroneous thumbwheel behavior on some inputs.
- New Settings page layout.
- Update End User License Agreement and Privacy Policy.
3.4.9
2019-01-13
- Fix METAR display bug.
Recent new features:
- Improve Memory Items page speed.
- Adjusted Risk page to avoid over-penalizing night flight.
- Spoken normal procedures for TBM 9X0.
3.4.8
2019-01-12
- Improve Memory Items page speed.
- Airport database update.
- Adjusted Risk page to avoid over-penalizing night flight.
3.4.7
2018-12-17
Minor bug fixes.
3.4.6
2018-11-21
- Fix for input bug on iOS 12.
Recent changes:
- Update to 900E0R4, 900E1R3, 910E0R2, 930E0R3, and 930E1R1 PIMs.
3.4.5
2018-11-16
- Update to 900E0R4, 900E1R3, 910E0R2, 930E0R3, and 930E1R1 PIMs.
- Fix Nxi messages.
- Fix radar scope display bug.
- Update airport database.
3.4.4
2018-08-31
- Add radar page
3.4.2
2018-08-01
- Improved cloud sync.
- Minimum safe runway is at least obstacle clearance distance for IFR safety.
3.4.0
2018-06-20
-Add required IAS at 50 ft. for obstacle clearance.
3.3.5
2018-05-03
- Spoken normal procedures for TBM 910 and 930.
3.3.4
2018-04-01
Minor bug fixes.
3.3.3
2018-03-18
- Fix bugs in normal procedures.
- Fix bug in METAR decode.
3.3.2
2018-03-17
- Minor bug fixes.
Recent new features:
- Add normal procedures.
3.3.1
2018-03-14
- Fixed Memory Items page.
- Corrected 700C2 procedures.
- Minor bug fixes.
Recent new features:
- Add normal procedures.
3.3.0
2018-03-10
- Added Normal Procedures for all models.
- Update airport database.
3.2.4
2018-02-11
- Bug fix for external links and email.
- Fix layout on iPhone X.
3.2.3
2017-12-07
Bug fix for Trips page
3.2.2
2017-11-30
- Update for recent PIM revisions.
- Reset input to default if invalid.
3.2.1
2017-11-28
- Update for recent PIM revisions.
- Reset input to default if invalid.
3.2.0
2017-10-15
- Performance improvements.
- Cloud backup when cloud sync is not enabled.
- Opt in or out for contact via email.
- Can set a numeric input mechanism for each device type.
3.1.6
2017-09-14
Bug fix for 900 procedures.
Bug fix for seat weight.
3.1.5
2017-09-12
- Automatically set wet/slippery surface conditions from METAR.
- Add memory item flash cards (More->Memory Items).
- Add data sources on aircraft page.
3.1.4
2017-09-09
- Automatically set wet/slippery surface conditions from METAR.
- Add data sources on aircraft page.
3.1.3
2017-08-08
- Fixed bug in airport magnetic variance
- Added weight to departure and destination diagrams
- Airport database update