1.248.1
2026-10-17
General improvements
1.248.0
2026-10-07
General improvements
1.247.1
2026-09-19
Fix:
- Improved app stability on devices running iOS 16
More details http://bit.ly/tedee-release-notes
1.247.0
2026-09-16
New:
- Calibration activity logs now show the user name.
Fix:
- Fixed an issue where Bluetooth Only Mode: it could not be manually disabled during an incident-like state, and it would not re-enable itself after a pull-to-refresh when the API was otherwise working.
More details http://bit.ly/tedee-release-notes
1.245.0
2026-08-06
New:
- Tedee account holders can now change their password directly in the app, from the Profile page.
- Added Finnish language support.
More details http://bit.ly/tedee-release-notes
1.244.0
2026-07-20
New:
- Filter your device list to quickly see only devices that need your attention.
- Search lock activity logs by user name or PIN alias.
- Filter lock activity logs by activity type (e.g. locked, unlocked, battery alerts, and more).
- Filter lock activity logs to show only activities before a selected date.
- Review all active activity log filters at a glance and clear them with a single tap.
More details http://bit.ly/tedee-release-notes
1.243.0
2026-06-24
Fix:
- Fixed an issue where the device’s lock status could become stuck after a failed lock or unlock operation.
More details http://bit.ly/tedee-release-notes
1.242.1
2026-06-03
Improve app stability
1.242.0
2026-06-02
New:
- Bridge Wi-Fi module firmware can now be updated directly from the app — both during the bridge adding process and from the Bridge settings.
Fix:
- Bluetooth-only mode now activates automatically only during major Remote Control Service outages, reducing unnecessary switches during minor incidents.
- Improved app layout for users with large font sizes enabled in iOS Accessibility settings.
More details http://bit.ly/tedee-release-notes
1.241.0
2026-05-13
New:
- Faster app launch after cold start—improvements make opening the app faster after it’s been killed and relaunched.
Fix:
- Improved error handling when adding Tedee GO to Apple Home—errors during commissioning are now handled correctly so users know when to try again.
- Updated PIN code lists for lock owners when using keypad over Bridge—pull to refresh now correctly shows the latest PINs.
More details http://bit.ly/tedee-release-notes
1.240.0
2026-04-23
New:
- Manage fingerprints from all accessories paired with the lock in one unified list, directly from the lock access tab.
- Added an informational message during firmware update reminding users not to move the lock, as doing so may cause loss of calibration.
Fix:
- Improved app responsiveness after launch — the device list is now immediately interactive, especially for users with many devices.
More details http://bit.ly/tedee-release-notes
1.239.0
2026-04-01
New:
- Added a warning bar and updated instructions for fingerprint enrollment on the Tedee Keypad Pro.
- Implemented haptic feedback for lock and unlock button interactions and status updates.
- Redesigned lock and unlock buttons in the device details view with new colors and animations.
- Added a toggle to enable or disable haptic feedback in the main application settings.
- Remote door sensor status monitoring is now available for administrators via the Tedee Bridge.
Fix:
- Improved performance of the sharing access process for users with very long contact lists.
More details http://bit.ly/tedee-release-notes
1.238.1
2026-03-14
Improve app stability
1.238.0
2026-03-10
New:
- Owners can now transfer device ownership to another user.
Fix:
- Fixed an issue that could delay sending requests under poor network conditions.
- Fixed an issue where the lock accessory’s last known battery level was not displayed.
- Fixed a rare issue that prevented users from starting Matter commissioning.
- Fixed an issue where a cached battery level could block firmware updates.
- Fixed an issue with handling timeouts during remote lock operations.
More details http://bit.ly/tedee-release-notes
1.237.0
2026-02-18
New:
- Added Matter support for the tedee locks GO and GO2 (requires firmware 2.1)
- Added support for configuring multiple Wi‑Fi names for Auto‑unlock Wi‑Fi checks
- Improved visibility of the Privacy Policy pop-up when extra‑large font sizes are enabled
Fix:
- Fixed an issue where the “Scroll to Top” button didn’t work on the My Devices page
- Fixed an issue where the lock status could remail stuck when certain errors occurred during lock operations
- Fixed an issue where Auto‑unlock failed to start after leaving and re-entering the Auto‑unlock zone
More details http://bit.ly/tedee-release-notes
1.236.0
2026-01-27
Fix:
- Fixed a rare issue that could block BLE communication.
- Fixed an issue when loading long lists of device activities.
- Fixed an issue where the connected Wi‑Fi name was not shown on the Advanced Auto‑unlock settings page.
- Fixed an issue where the loading view was cut off on the My Devices page.
More details http://bit.ly/tedee-release-notes
1.235.0
2026-01-05
New:
- The settings page of a disconnected device has a common design across all device types
Fix:
- Issue where a user was able to pair accessories with a lock when the two devices had different owners
- Issue with incorrect labels for start and end times in the daily hours section on the access details page
- Issue with the incorrect time picker used for daily hours in the access details page
More details http://bit.ly/tedee-release-notes
1.234.0
2025-12-02
New:
- Swipe to Unlock: You can now unlock your device with a simple swipe directly from the My Device page.
- Privacy Policy Confirmation: On first launch, you’ll be asked to review and confirm our Privacy Policy for improved security.
- Improved Navigation: The Privacy Policy and Terms of Use now open in your default browser for a smoother experience.
Fix:
- Fixed an issue where the last known battery level was displayed when the lock was disconnected.
- Resolved scrolling problems in long device lists and activity logs.
- Corrected a glitch that caused the red dot for new features to reappear.
More details http://bit.ly/tedee-release-notes
1.233.0
2025-11-19
New:
- A red dot appears whenever a new preview feature becomes available for preview testers
- After using a preview feature three times, preview testers will be asked to provide feedback
- A red dot appears when a new feature becomes available in the app
Fix:
- Fixed an issue with widgets, when using clear or tinted icons on iPhone
More details http://bit.ly/tedee-release-notes
1.232.0
2025-11-04
New:
- Preview: Possibility to enable or disable "Swipe to unlock" on "My devices" page
Fix:
- Fixed rare case where the lock status might not update properly
More details http://bit.ly/tedee-release-notes
1.231.0
2025-10-23
New:
- In Preview: Swipe to unlock the lock or gate from the My Devices page.
Fix:
- Stability improvements for Apple Watch
- Fixed an issue with receiving notifications after switching accounts
More details http://bit.ly/tedee-release-notes
1.230.0
2025-10-09
Fix:
- Fixed an issue when switching accounts after signing in to the same account
- Fixed an issue where the locking/unlocking state was displayed for too long when there was an internet connectivity problem
More details http://bit.ly/tedee-release-notes
1.229.0
2025-09-23
New:
- Display user groups in the device share list
- Show detailed access information for user groups
- Users with group access can view their own access details
Fix:
- Fixed an issue on some iPhones where enabling the torch caused the camera feed to freeze in the activation code scanner
More details http://bit.ly/tedee-release-notes
1.228.0
2025-09-09
- General improvements and optimizations.
More details http://bit.ly/tedee-release-notes
1.227.0
2025-08-29
- General improvements and optimizations.
More details http://bit.ly/tedee-release-notes
1.226.0
2025-08-13
New:
- Added meaningful information when user attempts to log in with an unsupported Microsoft work account
- Added an option to log out from all user devices
Fix:
- Fixed an issue where the lock state was not updating on the "My devices" page for locks connected via BLE
More details http://bit.ly/tedee-release-notes
1.225.0
2025-07-29
New:
- Dropped support for iOS 14 and iOS 15
- Added external power information for Keypad Pro
Fix:
- Fixed the order of available devices that can be paired with the lock or accessories
- Fixed missing device icons in the list of devices paired via the bridge
More details http://bit.ly/tedee-release-notes
1.224.0
2025-07-15
New
• You can now update the firmware of Keypad PRO even when it’s powered externally without batteries installed.
Fixed
• Lock activity history now loads correctly while scrolling.
• The charging icon for the lock now consistently appears when connected via Bluetooth.
• “Lock left unlocked” notifications now verify the current state before being sent.
• In Lock Settings, labels now correctly display the path to app settings on iOS 18 and above.
1.223.0
2025-07-01
New:
- Redesigned accessory pairing process
- Lock accessories can now be paired directly from the lock settings
- Updated description for the "Lock without PIN" feature on Keypad PRO
Fix:
- Prevented Auto-unlock from starting immediately after turning on the iPhone
More details http://bit.ly/tedee-release-notes
1.222.0
2025-06-10
New:
- Incident bar added for BleBox service issues
- New activity log entry for Auto-unlock events
- Profile name now shown in sidebar
Fixes:
- Lock operation reliability improved
- More stable Bluetooth connection with devices
- Lock status now updates correctly after app restart and actions
- Norwegian language now displays properly in settings
1.220.0
2025-05-14
New:
- All users can now use the Door Sensor in the Tedee app.
- It is now possible to purchase the Tedee GO2 lock and Tedee Door Sensor directly from within the Tedee app.
- The checkout page during the purchase process is now displayed in the user’s local language, for all languages supported on the tedee.com website.
- When adding a discharged device to an account, the administrator will be notified, but the process will not be blocked.
- Firmware updates are now blocked if the device’s battery level is too low. Updates will become available again once the device is charged or the batteries are replaced.
- Users will be notified when they are using an outdated version of the Tedee app.
Fixed:
- an issue where a misleading red dot appeared on the lock settings icon.
- an issue where lock settings were not updated after the share type was changed.
1.219.1
2025-04-23
Improve app stability
1.218.0
2025-04-09
New:
- It is now possible to pair a Dry Contact with the Bridge to allow automatic firmware updates when available
- Users can now learn more about Tedee devices by opening the product website directly from the Tedee app
Fixes:
- Fixed an issue where the calibration screen did not close after lock calibration was completed, but pull-spring calibration was canceled
- Fixed an issue where the lock remained stuck in the "moving" state after performing an action on the lock details page
1.217.1
2025-03-27
New:
- iOS 18: A new widget for opening gates is now available. Users can choose to open gates locally (when a location is configured) or remotely.
- The unlock widget can now be set to work via Bluetooth or via Bridge, if the lock is paired with one and the user has remote access enabled.
- All widgets have been refreshed with a modern, updated look.
- Purchasing new devices is now easier — users can buy a smart lock or accessories directly within the Tedee app.
- Dates and times are now displayed according to the user’s local region settings.
Fixes:
- Fixed an issue causing slow performance in the device list when users had more than 50 devices on their account.
1.216.0
2025-03-11
New:
- iOS 18: New widget allowing manual initiation of the Auto-unlock process.
- The Nearby widget now works faster when all user locks have Auto-unlock configured.
- Support for legacy iOS widgets has been removed.
- Improved user experience for the Nearby widget.
Fix:
- Fixed an issue with the bottom bar on the Keypad Pro details screen.
- Fixed an issue where finalizing a firmware update failed if the user left the application before the device rebooted.
More details http://bit.ly/tedee-release-notes
1.215.0
2025-02-27
New:
- New iOS 18 widget allowing users to unlock configured lock
- Updated designs of the bridge details page
- Updated designs of the lock details page
Fix:
- Fixed issue with updating pull spring time when set to more than 60 seconds
- Fixed temporary display of the uncalibrated state for locks connected via BLE after the app was killed and relaunched
More details http://bit.ly/tedee-release-notes
1.214.2
2025-02-12
New:
- Tedee app is now available in Japanese.
Fixes:
- Improved accessibility of the new time picker.
- Fixed an issue where pairing devices was unsuccessful.
- Fixed an issue that allowed pairing a lock not in the organisation with a bridge that is in the organisation.
1.211.2
2024-12-21
General improvements
1.211.0
2024-12-17
General improvements
1.210.0
2024-12-03
Fixes:
- Fixed an issue where a device was successfully paired, but an error message was displayed.
- Fixed an issue where no locks were detected during the process of adding a bridge.
- Fixed crashes occurring while using the app.
1.209.1
2024-11-20
Fix:
- Crash that could happens after lock operation is performed
1.208.0
2024-11-05
New:
- Dry Contact configuration can now be customized using predefined templates or user-defined settings. Predefined templates can be downloaded, edited, and re-uploaded to Dry Contact. Users can also create a custom configuration from scratch and upload it. Note: Dry Contact firmware must be updated to enable these new configuration features.
Fix:
- Fixed an issue where the device list would not scroll to a newly added device.
- Fixed an issue where the user’s email was not visible when a share invitation was pending approval.
More details http://bit.ly/tedee-release-notes
1.206.0
2024-10-08
New:
- You can now check the keypad's battery level remotely, without needing a Bluetooth connection.
- It is now possible to select any future start date when configuring access limits for users and PINs.
- When sharing an organization device, contacts tab is now selected by default if the user has granted access to their contacts.
- We have further improved the appearance and behavior of the sharing views:
-- The "Add" button now shrinks when the list of shares or PINs is scrolled
-- Users can now swipe between the "Users" and "PINs" tabs.
-- The user share details page now displays more information about the user and the status of the invitation.
- The widgets section has been removed on iOS 18+ devices as this version no longer supports Today Widgets.
Fixes:
- We have made several improvements to enhance app performance on the "My Devices" list.
1.205.1
2024-09-27
Fix:
- crash after unlocking the app with PIN or Face ID
1.205.0
2024-09-24
New:
- When the user does not yet have access to the device, it is now easier to go directly to the device share details.
- Improved application performance.
- Instead of the Keypad details page, the user will now see the Keypad settings page when tapping on the Keypad device in the "My Devices" page.
- If the Keypad is disconnected, the user can tap the connection status element to see why the device is disconnected.
- Lock PINs can now be managed directly from the Keypad itself.
More details http://bit.ly/tedee-release-notes
1.203.0
2024-08-27
New:
- Added a search feature to the list of device shares
- Added the ability to import contacts from the phone when creating a new device share
Fix:
- Fixed the Swedish translation
More details http://bit.ly/tedee-release-notes
1.202.0
2024-08-13
New:
- We have unified access limit descriptions across all devices.
- It is now easier to change the device name when adding a new device.
Fix:
- We have fixed an issue where, after a password reset, the user's session would expire frequently.
More details http://bit.ly/tedee-release-notes
1.201.0
2024-07-29
New:
- Improved design of the bottom bar on the Dry Contact settings page.
Fix:
- Fixed an issue where the Dry Contact could not be factory reset while being deleted from the account.
- Fixed a design issue when the user is navigated to sign in with Microsoft from the account creation process.
More details http://bit.ly/tedee-release-notes
1.200.0
2024-07-15
New:
- Users can now see that shared Dry Contact device permissions are not active.
- Users can delete their share for the Dry Contact device.
- When deleting an account that owns any organization, the user is now informed about the requirement to remove those organizations before deleting the account.
- The Bridge Wi-Fi configuration page now has improved contrast.
- Users can access the new Tedee Community forum directly from the Tedee app.
Fixes:
- Fixed an issue where the lock battery field had improper height during update.
- Fixed an issue where the app did not verify current location permissions upon entering the foreground and did not inform users that AU will not work if the setting is other than "Always."
- Fixed an issue where the Dry Contact device was not factory reset during deletion.
- Fixed an issue where the back button was disappearing on the App settings page.
1.199.0
2024-07-02
New:
- Search and filters are avaiable for everyone
- Added device type filter
- Organization admins can re-add factory reset devices to the organization
Fix:
- App stuck in BLE mode after internet problems
More details http://bit.ly/tedee-release-notes
1.198.1
2024-06-18
New:
- Added support for a new device type that allows you to unlock the Tedee Lock using wires: Dry Contact
- You can now use your Microsoft account to log in to the Tedee App.
- It's now easier to distinguish the incident status bar from the session expired status bar.
- Tedee lock administrators can now see in the activity logs when a PIN was used outside of authorized access times.
- Tedee lock administrators can now see in the activity logs when the spring was pulled automatically using a PIN.
Fixes:
- Fixed issues with connecting to the lock using Bluetooth.
- Fixed issues where the access token could not be refreshed in the background, resulting in the session expired status bar being displayed.
- Improved some accessibility labels in widgets configuration and selection elements.
- Fixed an issue where the lock could not be calibrated during the adding process.
1.197.0
2024-06-04
New:
- Added "Uncalibrated" activity log
- Improved handling of unhealthy API
- Improved handling of unhealthy login service
- Improvements in automatic "Bluetooth only" mode
- New design of "No internet connection" bar
- Blocking logout or account switching when the login service is unhealthy
Fix:
- Fixed UI issues
More details http://bit.ly/tedee-release-notes
1.196.1
2024-05-23
Fix:
- Crash on entering pull spring settings page
1.184.0
2023-11-14
New:
- Improved designs of My Devices screen, with a new way of presenting disconnected devices
- Preview Feature: Bridge API that allows operating the lock from the local network
Fix:
- Issue with showing AU timeout notification after AU was cancelled by another lock
- Position of the favorite icon on the lock details page
More details http://bit.ly/tedee-release-notes
1.176.0
2023-07-24
New:
- We've added a battery level indicator for the tedee GO lock: high/medium/low.
Fix:
- Fixed issue that could cause the selected lock to change on the lock details page without user interaction.
- Fixed issue that could fail the first attempt of the calibration process after replacing batteries in the tedee GO lock.
- Resolved a performance issue.
More details http://bit.ly/tedee-release-notes
1.173.1
2023-06-15
- Minor bug fixes
1.170.0
2023-04-25
New:
- New icons for tedee relay module (Gate) help to show where the module is installed
- Selecting default organization for devices added via integration with BleBox
Fix:
- Issue with widgets when the Gate button animation was cancelled by the interaction with the lock buttons
More details http://bit.ly/tedee-release-notes
1.169.0
2023-04-11
New:
- You can now use Blebox integration to add Blebox doorBox devices to the Tedee app to open a variety of doors and gates (shared entrance doors, barriers, garage doors, entry gates, etc.).
- Gates added via Blebox integration can be operated and shared as easy as Tedee devices.
- When the gate is activated via a link generated over portal.tedee.com (organization feature) the gate owner or administrator will see the description of this event in the activity logs.
- When the lock is unlocked via a link generated over portal.tedee.com (organization feature) the lock owner or administrator will see the description of this event in the activity logs.
Fixed:
"Bluetooth only mode" and "Force unlock" was enabled with the Bluetooth turned off in the system settings.
1.154.0
2022-08-30
Fix:
- Issue with calibration during adding process
- Issue that could make auto unlock process unstable
- Issue that could unlock the door twice during auto unlock process
- Issue with software updated notification
More details http://bit.ly/tedee-release-notes
1.95.1
2020-04-30
Fix:
- Updating bridge issues