1.22.0
2024-04-11
Overview
UniFi Protect iOS 1.22.0 adds the ability to manually specify the domain name for direct connections and improves the resiliency of live streams, recordings, and 2-way audio.
Improvements
- Added the ability to manually specify the domain name for direct connections to your UniFi Consoles.
- Improved performance and resiliency of live streams and recordings.
- Improved 2-way audio resiliency.
- Improved Dashboard empty view when there are no Protect devices.
Bugfixes
- Fixed an issue where streams fail to load in certain cases and show only greyed-out overlay.
- Fixed an issue where setting custom notification sound was ignoring focus mode causing the notification sound to play regardless.
- Fixed an issue where notifications weren't working on Apple Watch when custom notification sound was enabled.
- Fixed incorrect storage capacity shown in certain cases.
- Fixed console dropdown sometimes not updating data correctly.
- Fixed an issue where sometimes Timeline would load a recent timestamp causing the livestream to get stuck.
Known issues
- You may experience streaming issues after a couple of minutes while using 3rd party VPNs, this will be fixed in an upcoming release.
1.21.0
2024-02-29
Overview
UniFi Protect iOS 1.21.0 adds the ability to manually specify the UniFi Console IP address for direct connections and includes support for newly added detections since Protect 2.11.21.
Improvements
- Added the ability to manually specify the console IP address for direct connections to the UniFi Console.
- Added support for configuring and viewing newly supported detections added in Protect 2.11.21.
- Added object tracking in the Detections player.
- Added microphone noise reduction mode for G5 series cameras.
- Improved performance of 2-way audio via remote connections.
- Improved global recording settings user experience.
- Improved Detections player settings user experience.
- Improved device firmware update UI.
Bugfixes
- Fixed the inability to access device-specific push notification settings if the user only has Viewer permissions.
- Fixed the inability to reconnect wireless cameras in rare cases.
- Fixed false AC voltage warnings for doorbells.
- Fixed an issue where auto-tracking didn't initialize when enabling it.
- Fixed an issue where audio streams weren't stopped after exiting the app in rare cases.
1.20.0
2024-01-24
Overview
UniFi Protect iOS 1.20.0 adds support for object tracking in recordings, changing push notification sound, and includes improvements for playback controls in Timeline.
Improvements
- Added object tracking support for recordings in the Timeline. Configurable in Playback Settings > Highlight Smart Detections.
- Added zoom level slider in the Timeline.
- Added option to change the sound for push notifications. *
- Improved UX of the Timeline playback controls - configure showing inside or below the viewer.
- Improved stability of the detection player.
- Improved streaming resiliency.
* Currently supports only camera notifications. Configurable in Settings > App Preferences > Notification Sound.
Bugfixes
- Fixed an issue where the mechanical chime option was shown on the G4 Doorbell Professional PoE.
- Fixed an issue where auto-tracking sometimes is not enabled on the G4 PTZ.
- Fixed a rare issue where "Protect is Offline" was sometimes shown when switching between consoles.
- Fixed the wireless device reconnect popup on iPads.
1.18.1
2023-11-15
Overview
UniFi Protect iOS 1.18.1 includes UX improvement for the global recording settings that will be available in the upcoming UniFi Protect Application 2.9, as well as addresses an issue with 2-way talk in timeline.
Improvements
- Improved UX of global recording settings - allow configuring what Motions/Events to record. *
* Requires UniFi Protect Application 2.9 or newer.
Bugfixes
- Fixed 2-way talk session sometimes not stopped when exiting the timeline view.
1.18.0
2023-10-19
Overview
UniFi Protect iOS 1.18.0 adds support for new features that will be available in the upcoming UniFi Protect Application 2.9, includes improvements for geofencing and account handling.
Improvements
- Added a new “Updates” category under the System Log. *
- Added global push notification settings and improved UX. *
- Added global recording settings and improved UX. *
- Added ability to perform individual camera firmware updates. *
- Added license plate search in Detections view. **
- Added PTZ preset support.
- Improved performance and stability of geofencing.
- Improved "Managed by other" device UX.
- Improved account handling between Ubiquiti apps.
- Improved Smart Detection consent UX.
- Improved application stability.
* Requires UniFi Protect Application 2.9 or newer.
** Requires AI-compatible cameras and UniFi Protect Application 2.9 or newer.
Bugfixes
- Fixed camera reconnects not working properly when triggered from Overview.
- Fixed timeline being expanded even when there’s no recording history.
1.17.0
2023-09-14
Overview
UniFi Protect iOS 1.17.0 adds support for crossing line settings and includes improvements for PTZ and account handling between Ubiquiti apps.
Improvements
- Added quick action to open multi-view when rotated to landscape. *
- Added crossing line settings for smart detections.
- Improved PTZ controls and added auto-tracking.
- Improved play/pause logic in Timeline.
- Improved Login screens and account handling between Ubiquiti apps.
- Improved "Managed by other" device UX.
- Improved application stability.
* To enable it, go to Settings > App Preferences > Landscape Multi-View.
Bugfixes
- Fixed several issues with talkback in Timeline.
- Fixed several issues with mute/unmute state in Timeline and Detections player.
- Fixed some cases where geofence location is not updated right away.
- Fixed an issue where the doorbell message still shows after successful removal.
- Fixed issue where the Dashboard would become empty when an offline camera comes back online.
1.16.1
2023-08-18
Overview
- UniFi Protect iOS 1.16.1 improves the recording playback stability.
Improvements
- Improved stability for playing back recordings.
- Improved UX for privacy and motion zones.
Bugfixes
- Fixed invalid reconnect messages may appear for WiFi cameras.
- Fixed 2-way audio wasn't working right after allowing permission to the phone's microphone.
1.16.0
2023-07-26
Overview
- UniFi Protect iOS 1.16.0 adds support for presets and portrait mode on the Multi-View and includes several UX and stability improvements.
Improvements
- Added preset support on the Multi-View. *
- Added portrait mode support on the Multi-view.
- Improved UX of the Multi-View.
- Improved application stability.
* Currently only supports up to 16 cameras. We plan to increase the number of cameras in future releases.
Bugfixes
- Fixed issue where in certain cases the camera audio stream would not stop when minimizing the app.
- Fixed incorrect connection type icon shown for PoE Chime.
- Fixed incorrect microphone sensitivity value range.
- Fixed occurrences of showing incorrect timestamps in the System log.
- Fixed an issue where the “Manage UI Account” button was not responding to tap gestures on macOS.
1.15.2
2023-06-29
Overview
UniFi Protect iOS 1.15.2 improves the camera feed playback stability and addresses an issue with the 2-way audio when receiving a doorbell notification.
Improvements
- Improved stability of the camera feed playback on the dashboard.
Bugfixes
- Fixed 2-way audio may not work when receiving ring notifications from a Doorbell.
1.15.1
2023-06-26
Overview
UniFi Protect iOS 1.15.1 adds a hardware keyboard shortcut for playing/pausing the video and addresses an issue where detections fail to play in a certain scenario.
Improvements
- Added a hardware keyboard shortcut for playing/pausing the video when the spacebar key is pressed.
- Improved application stability in the Timeline view.
Bugfixes
- Fixed an issue where detections failed to play after tapping on a detection notification. Occurred only if the Detections player was turned off in settings.
1.15.0
2023-06-14
Overview
UniFi Protect iOS 1.15.0 adds the Picture in Picture mode for livestreams, dewarped view improvements for 360 cameras and several enhancements for the Timeline view.
Improvements
- Added Picture in Picture (PiP) support for livestreams.*
- Added the ability to swipe between cameras on iPad while in landscape (fullscreen) mode in the Timeline view.
- Added 16:9 aspect ratio dewarped view support when in fullscreen for 360 cameras.
- Improved dewarped view UX and gesture performance for 360 cameras.
- Improved adoption when the user selects an incorrect network.
- Improved application stability in the Timeline view.
* Requires iOS 16.4.1 or newer. To enable the feature, open the Timeline view and press on the PiP icon.
Bugfixes
- Fixed issue where clip export size calculation was incorrect in the Timeline view.
- Fixed reconnect issue when switching from WiFi with Direct to Remote connection.
- Fixed an issue where the Follow System Audio setting may not work.
- Fixed issue where labels of detection record settings overlap.
1.14.0
2023-04-28
Overview
UniFi Protect iOS 1.14.0 adds the G4 Doorbell Pro package camera playback support, app switcher and includes several UX and stability improvements for iPhone, iPad and macOS users.
Improvements
- Added app switcher element for faster navigation across other UniFi apps.
- Added G4 Doorbell Pro package camera recordings playback and timelapse support.
- Added G4 Doorbell Pro package camera player on iPad.
- Added ability to swipe between cameras on iPhones while in landscape (fullscreen) mode in the Timeline view.
- Added ability to tap a detection category on Dashboard to view it in the Detections tab.
- Added an offline camera counter in Dashboard.
- Improved stackable NVR support in Devices tab.
- Improved Clip export stability.
- Improved the UI of the Devices tab.
- Improved overall UI responsivity.
- Improved stability on macOS.
- Improved camera drawer stability in the timeline view.
Bugfixes
- Fixed timeline issues when switching between cameras using the drawer.
- Fixed frozen camera control occurrences on G4 PTZ.
- Fixed ViewPort and Floodlight details showing incorrect connection state.
- Fixed Local Console disconnection popup while opening the app from its background state.
- Fixed issue where devices were offered for Bluetooth adoption after console reset.
1.13.0
2023-03-29
Overview
UniFi Protect iOS 1.13.0 adds support for ViewPort, Dashboard notifications and hiding IoT devices, and includes several improvements for iPad users.
Improvements
- Added support for Viewport.
- Added Dashboard notifications.
- Added locate function for a user with viewer permission.
- Added missing sections for Floodlight.
- Added an option to hide IoT devices from Dashboard.
- Added warning if Theta camera has no lens attached.
- Added different AI DSLR image if the case is attached or not.
- Improved Dashboard grid view responsiveness for iPads.
- Improved Devices tab for iPads.
- Improved Console selector for iPads.
Bugfixes
- Fixed adoption not appearing for the removed camera.
- Fixed playback resuming after rearranging cameras on Dashboard.
- Fixed race-condition when opening timeline from Dashboard immediately after establishing connection.
- Fixed several potential stability issues.
- Fixed unable to connect to consoles locally that run Older UniFi OS versions due to missing Protect permissions.
1.12.0
2023-02-24
Improvements
- Add Detections player.
- Add an option to disable the Detection player in App Preferences.
- Add Detections clip deletion and export on long press.
- Add notification in Dashboard if update available.
- Add an option to hide IoT devices from Dashboard.
- Add an Admins section to Settings.
- Improve Geofence accuracy.
- Improve Wi-Fi camera setup.
- Improve sensor reading and safe zone accuracy.
Bugfixes
- Fix Doorbell live playback issues.
- Fix the Doorbell stream not working after adoption.
- Fix the blinking timeline by improving image caching.
- Fix push notifications may still appear after logging out in rare cases.
- Fix When to Record settings not showing correctly during camera reconnects.
- Fix the timelapse not working on iPad with Launch Recent Camera.
- Fix the tap gesture breaking when dismissing the account screen.
- Fix System Logs swipe to go back gesture.
- Fix talkback not working with AirPods.
- Fix issues with Sensor values.
1.8.0
2022-11-03
Improvements
Improve app startup experience.
Improve timeline loading and stability.
Use Excellent/Good/Poor labels for connection experience.
Add Devices tab for iPad.
Bugfixes
Fix frozen live view in Multi-view.
Fix stability issues in the dashboard.
Fix frozen video issue after navigation between Dashboard/Timeline.
Fix the issue where reconnect couldn't connect to Public IP directly.
Fix the opening of favorite cameras.
Fix "No Detections" message.
1.7.3
2022-10-17
- Fix unable to connect to the console in rare cases.
- Fix Doorbell talkback function not working when opened from a notification with a direct connection.
1.7.2
2022-10-11
- Additional stability improvements.
1.7.1
2022-10-05
Improvements
- Improve recording playback resiliency.
- Improve session resiliency.
Bugfixes
- Fix playback not working on iPadOS 16 and iOS 16.
- Fix the full-screen button not working on iOS 16.
- Fix the console list being empty for a new user.
- Fix stream not starting when launch recent camera is enabled.
- Fix slow loading timeline on a local connection.
- Fix blank package camera view for Doorbell Pro.
- Fix account image not loading.
- Fix blurry camera image when doing a clip export.
1.7.0
2022-09-26
Improvements
- Add Multi-View support.
- Add notification in Timelapse when Resolution is lowered.
- Add support for 360 camera stream dewarping.
- Add console information in the Devices section.
- Add Line crossing events in Timelapse.
- Add tab navigation to iPad.
- Add option to locate Smart Flood Light.
- Add content caching.
- Add High Frame Rate Mode toggle for the supported camera.
- Improve Dashboard and Recent detection UX.
- Improve Timelapse content loading time.
- Improve connection and service outage toast UX.
- Improve startup stability.
Bugfixes
- Fix an issue where the header contains redundant spacing.
- Fix an issue where "Create new message" button is unresponsive.
- Fix an issue where Account section actions are unresponsive.
- Fix an issue where tapping on device might open details for wrong device.
- Fix an issue where 360 camera in Live View details is stretched.
- Fix an issue where navigation bar might disappear when setting up camera.
- Fix an issue where navigation bar not hiding when Doorbell notification feed is closed.
- Fix an issue where static black or white screens appears.
- Other stability improvements and bug fixes.
1.6.9
2022-09-12
Improvements:
- Improve local console discovery.
Bugfixes
- Fix issue with top spacing in the Dashboard on devices running iOS 16.
- Fix Timeline playback might get stuck when opening recent detection.
- Fix optical zoom and focus field appearance.
1.6.7
2022-08-22
Fix crash on launch for pre-UniFi OS devices for users that have "Launch recent camera" enabled.
1.6.5
2022-08-01
Improvements
- Improve authentication resiliency.
- Improve connection stability.
- Improve direct console discovery.
- Improve remote connection time.
- Improve scrolling to an event in the timeline.
- Improve state restoration.
- Add “Playback Settings” for iPad.
- Add Primary device option in settings for the view-only user.
- Add deprecation notice view. (support for pre-UniFi OS devices will be dropped in the next release)
- Add event thumbnail for player when timeline seeking.
- Add extra doorbell message durations.
- Add package detection type.
- Add support for MFA.
- Add notification in case when camera has a bad connection.
- Remove 15-minute message from “Ring Screen”.
- Minor UX improvements.
Bugfixes
- Fix issue with “Console List” state race.
- Fix issue with “Detections List” position change.
- Fix issue with “Favorite Camera” actions.
- Fix issue with “Go Live” appearance.
- Fix issue with “Primary Device” selection.
- Fix issue with “Timelapse Export” limits.
- Fix issue with Camera FPS value.
- Fix issue with avatar appearance when expanded “Console List” is visible.
- Fix issue with chime paired doorbell icon.
- Fix issue with compressed info icons.
- Fix issue with location permissions and primary device selection.
- Fix issue with ring event replay.
- Fix issue with showing console which does not have Protect Application installed.
- Fix issue with showing popups in the wrong theme color.
- Fix issue with theme switch behavior.
- Fix issue with wrong console shown in “Console List”.
- Fix issue with zone name change validation.
- Fix issue where export fails after 15 seconds on direct connect.
- Fix crash related to new “Smart Zone” creation.
- Fix ring event dead-end.
- Other stability improvements and bug fixes.
1.6.4
2022-05-24
- Fix issue where PTZ recording playback won't start.
- Fix issue where initial “Launch Recent Camera” transition will not play back live video.
- Fix issue where transition from “Launch Recent Camera” screen to "Camera List" will cause crash.
1.6.3
2022-05-10
Improvements:
- Add new device details UX.
- Add App preferences.
- Improve switching between consoles.
- Improve clip export functionality.
- Improve connection resiliency.
- Improve General Console and Account settings UI.
- Minor UX improvements.
Bugfixes:
- Fix discovery issues.
- Fix go live behavior when there is an ongoing motion event near live.
- Fix playback issue when the user returns from TL to Dashboard.
- Fix unresponsive thumbnails in “Timeline mode”.
- Improve authentication resilience.
- Other stability improvements and bug fixes.
1.6.2
2022-04-13
Bugfixes
- Fix issue where local connections to consoles don't work after Protect 1.21.4 or newer.
1.6.1
2022-03-14
Improvements
- Add support for direct connections across VLANs. (Requires SSO authentication, and UniFi OS/Console versions 1.11.0 / 2.3.0 or newer)
- Add support for dark mode.
- Add redirect to Network app to support console setup without SSO.
- Add support for the “Recording mode changed” event.
- Change “Clip Export” timelapse dropdown values.
- Update the UI of the “Camera Name” screen.
- Update “Camera Settings” UI.
- Update “Device List” UX.
- Remove consoles without Protect Application from console list.
- Remove intro animation from the local history screen.
Bugfixes
- Fix selected lens when creating a snapshot.
- Fix package camera position.
- Fix copy in “FloodLight” settings.
- Fix crash related to “Clip Export”.
- Other stability improvements and bug fixes.
1.6.0
2022-02-03
Improvements
- Add camera update progress indicator.
- Improve clip-export UX.
- Improve zoom indicator UX.
- Improve microphone button position.
Improve the "Go Live" button appearance.
Improve direct connect session handling.
- Improve buffering animation.
- Improve reconnect to the recent console.
Bugfixes
- Fix crash on the "Camera List" screen.
- Fix crash on the "Detections" screen.
- Fix crash related to multiple concurrent 4k streams.
- Fix "Quick Action" initial position.
- Fix "Setup Popup" when Protect Application is uninstalled.
- Fix incorrect connection speed values.
- Fix changing Stream Resolution for a camera with microphone prompts for microphone access.
- Fix stale streams in the camera list for iPad's.
- Fix snapshot access permission for iPad's.
- Fix issue where clip export was not available in rare cases.
1.5.9
2022-01-13
Improvements
- Add new doorbell ring popup UX.
- Add "Enable Notifications view" to camera settings.
- Improve Timelapse clip export UX.
- Improve detections screen.
- Improve audio session persistence.
- Improve native permission requests.
- Improve background location handling.
- Improve local console discovery.
- Improve Doorbell ring sound file.
- Improve switching between multiple local consoles.
Bugfixes
- Fix labels that contain an amount of time.
- Fix crash when deleting last local console.
- Fix initial audio session issue.
- Fix console list parsing issues.
- Fix Timelapse rotation crash.
- Fix iPad Timelapse rotation dead-end.
- Fix the frequency of system status updates.
- Fix 2FA close button alignment.
- Fix direct console appearance when a Remote Access service is down.
- Fix camera settings background view animation.
- Fix remote access availability messaging.
1.5.8
2021-11-25
Improvements
- Improve Sensor settings.
Bugfixes
- Fix stability issue in the Smart Detection section.
1.5.5
2021-09-20
We've made several key fixes and improvements to enhance your UniFi Protect experience and ensure peak performance.
1.4.6
2020-12-22
IMPROVEMENTS
Added `UP Flood Light` support.
Controller device setup users are redirected to new UniFi app.
Improved UX of connection screen.
Improved section names.
BUGFIXES
Fixed possible crash if user opened multiple events in a row.
Fixed possible crash if users tried to reconnect.
1.4.5
2020-12-02
In this version: opening last watched camera and bug fixes.
IMPROVEMENTS
* Open the last viewed camera when connecting to the device.
* Add booting indicator to G3 Instant camera during the adoption process.
FIXES
* Fix bug where a user could get logged out if using the same account on multiple devices.
* Fix bug where a user with unverified email could log in.
* Fix bug where a user would see a black screen when opening smart detection push notification.
* Fix broken G4 PTZ camera controls on iPads.
We value your feedback! If you have an idea on how to improve the app, feel free to contact us using the Ubiquiti support portal - help.ui.com
1.4.4
2020-11-19
In this version: new PTZ controls, Smart Detection, and bug fixes.
FEATURES
* Smart Detection support.
IMPROVEMENTS
* Improved G4 PTZ camera controls.
FIXES
* Fixed bug that caused black screen when opening the app from push notifications.
* Fixed bug where users are logged out of the app.
* Fixed bug where the Doorbell Ring event video stream could freeze.
We value your feedback! If you have an idea on how to improve the app, feel free to contact us using the Ubiquiti support portal - help.ui.com
1.4.3
2020-10-09
In this version: setup and connectivity improvements.
FEATURES
Added support for new cameras.
Added support for native UNVR and UNVR Pro setup.
Added High FPS option to Camera settings.
IMPROVEMENTS
Improved connectivity logics.
We value your feedback! If you have an idea on how to improve the app, feel free to contact us using the Ubiquiti support portal - help.ui.com
1.4.2
2020-09-01
In this version: bug fixes and stability improvements.
We value your feedback! If you have an idea on how to improve the app, feel free to contact us at protectmobilefeedback@ui.com.
1.4.0
2020-07-20
In this version: video latency and stability improvements.
FEATURES
Added option to use messages from UVC G4 Doorbell ring popup.
Added support for UNVR and UDM-Pro controllers running without HDD (Controller version 1.14.11+ required).
IMPROVEMENTS
Improved live playback latency in Camera screen while connected to the Wi-Fi network.
Improved UVC G4 Doorbell setup experience.
FIXES
Fixed an issue when “New Device Found” popup had an incorrect IP address.
Fixed stability issues for the new device discovery.
Fixed stability issues in the Camera screen.
Fixed multiple issues for the Bluetooth camera setup.
Fixed an issue when a user could not setup UNVR.
We value your feedback! If you have an idea on how to improve the app, feel free to contact us at protectmobilefeedback@ui.com.
1.3.9
2020-05-28
In this version: device setup popup and stability improvements.
FEATURES
Added popup to conveniently add devices and controllers.
IMPROVEMENTS
Added option to disable the chime during the UVC G4 Doorbell setup.
Added Troubleshoot option for UNVR.
FIXES
Fixed an issue when the user could not reconnect using the "Retry" button on the Connection screen.
Fixed an issue when the user could not select items in the User section of Alerts settings.
Fixed an issue when UNVR was randomly appearing and disappearing during the setup.
Fixed stability issues when using UNVR or UDM-Pro.
We value your feedback! If you have an idea on how to improve the app, feel free to contact us at protectmobilefeedback@ui.com.
1.3.8
2020-05-07
In this version: motion Insights, G4 Doorbell support, and stability improvements.
FEATURES
Added Insights for recorded motion events (Controller version 1.13.0+ required).
Added G4 Doorbell support (Controller version 1.13.3+ required).
Added UNVR setup support.
IMPROVED
Improved Activity screen to separate activity events from status changes.
FIXES
Fixed stability issues in the Camera screen.
Fixed an issue when WiFi camera stats were reported incorrectly.
Fixed motion zone, privacy zone, and touch focus editing on iPads.
Fixed status bar issue on iPad.
We value your feedback! If you have an idea on how to improve the app, feel free to contact us at protectmobilefeedback@ui.com.
1.3.7
2020-03-09
In this version: motion detection algorithm switch, stability and performance improvements.
FEATURES
Added a Camera setting to switch between motion detection algorithms (Controller version 1.13.2+ required).
FIXES
Fixed an issue when a user could not select the current date in the calendar on the Camera screen.
Fixed an issue when video streams would not resume on iPad.
Fixed an issue when the user was not navigated to Timeline from the push notification.
Fixed stability issues in the Camera screen.
We value your feedback! If you have an idea on how to improve the app, feel free to contact us at protectmobilefeedback@ui.com.
1.3.6
2020-02-11
In this version: bug fixes and performance improvements.
We value your feedback! If you have an idea on how to improve the app, feel free to contact us at protectmobilefeedback@ui.com.
1.3.5
2020-02-03
In this version: stability and performance improvements.
FEATURES
Added support for G4 Bullet, UNVR4, and UDM Pro.
FIXES
Fixed reconnection issue for the controllers in the local network.
Fixed an issue when talkback was disabled on device rotation.
Fixed an issue when switching to Timeline motion-only mode had an incorrect scale.
We value your feedback! If you have an idea on how to improve the app, feel free to contact us at protectmobilefeedback@ui.com.
1.3.4
2020-01-15
In this version: stability and performance improvements.
IMPROVED
Improved connection speed to controller (Controller version 1.13.1+ required).
FIXES
Fixed an issue when the user could not export clips in bad network conditions.
Fixed stability issues in the Camera screen.
We value your feedback! If you have an idea on how to improve the app, feel free to contact us at protectmobilefeedback@ui.com.
1.3.3
2019-12-19
In this version: motion-only Timeline, side menu, and stability improvements.
FEATURES
Added motion-only Timeline mode.
IMPROVED
Improved Side Menu and controller list.
Improved connection speed to controller (Controller version 1.13.0+ required).
FIXES
Fixed an issue when the user could not set a Camera Enhance setting.
Fixed issue with Camera audio on phone rotation.
Fixed digital zoom animation issues.
We value your feedback! If you have an idea on how to improve the app, feel free to contact us at protectmobilefeedback@ui.com.
1.3.2
2019-11-06
In this version: stability and performance improvements.
FIXES
Fixed an issue when a user could not delete mobile devices in Account & Cloud.
Fixed app stability issue when changing the Camera Enhance setting.
Fixed an issue when the Back Up Now button did nothing.
Fixed an issue when a user could zoom in live for the offline camera.
Fixed an issue when navigating from Update screen on iPad.
Fixed an issue when a user could not set When To Send for Alerts.
We value your feedback! If you have an idea on how to improve the app, feel free to contact us at protectmobilefeedback@ui.com.
1.3.1
2019-10-18
In this version: stability and performance improvements.
FIXES
Fixed a Timeline scaling issue when overlapping thumbnails were not removed.
Fixed app stability issues.
We value your feedback! If you have an idea on how to improve the app, feel free to contact us at protectmobilefeedback@ui.com.
1.3.0
2019-10-14
In this version: geofence-based alert filtering, troubleshooting wizard, stability and performance improvements.
FEATURES
Added geofence-based filtering for alerts.
Added wizard for troubleshooting controller and camera setup issues.
Added a screen to manage and overview app permissions.
IMPROVED
Improved bottom controls on the Camera screen.
FIXES
Fixed a talkback issue when using Bluetooth headphones with a microphone.
Fixed app stability issues.
Fixed iPad zoom issue when double tap did nothing.
We value your feedback! If you have an idea on how to improve the app, feel free to contact us at protectmobilefeedback@ui.com.
1.2.9
2019-08-14
In this version: improved Talkback, bug fixes, and performance improvements.
IMPROVEMENTS
* Improved Talkback controls for iPhone and iPad.
* Improved Camera Drawer for 12.9 inch iPad.
FIXES
* Fixed a crash in Activity screen.
* Fixed an issue in Camera Settings when the user could not set a new * setting value.
* Fixed an issue when Camera icons were set incorrectly and were not scaling properly.
* Fixed an issue when thumbnails were not displayed during clip export.
* Fixed animation issue in Location settings.
We value your feedback! If you have an idea on how to improve the app, feel free to contact us at protectmobilefeedback@ui.com.
1.2.8
2019-07-30
In this version: new features for iPad, stability improvements and app launch time optimizations.
FEATURES
* Added Backup Settings for the Controller.
* Added Clip Export and Camera Drawer for iPad.
IMPROVEMENTS
* Improved connectivity restoration from the background.
* Improved Talkback control responsiveness both on iPad and iPhone.
* Improved application and connection start times.
FIXES
* Fixed black screen issue, when the app was resumed on the Camera screen.
* Fixed Settings layout issue on iPad.
Fixed an issue when old Camera screen was opened from Activity on iPad.
* Fixed stability issues on the Camera screen.
* Fixed stability issue in Camera List on iOS 10.3.
We value your feedback! If you have an idea on how to improve the app, feel free to contact us at protectmobilefeedback@ubnt.com.
1.2.7
2019-06-17
In this version: improved Controller Settings, new Camera Settings options and bug fixes.
FEATURES
* Camera Settings now have new options: Night Vision without LEDs, HDR mode, Live Resolution.
* Controller Settings now have a Storage option.
IMPROVEMENTS
* Improved Controller Settings screen.
* Added an option for a user to leave controller.
FIXES
* Improved video stream stability.
* Improved Timeline stability.
* Fixed Fullscreen toggle on the Camera screen.
* Fixed an issue when the app could get frozen while fetching the vast amount of data.
* Fixed an issue, when a user could travel from Activity to no-longer-existing Timeline date.
We value your feedback! If you have an idea on how to improve the app, feel free to contact us at mobilefeedback@ubnt.com.
1.2.6
2019-05-13
In this version: alert filtering, improved Camera settings and bug fixes.
FEATURES
* Alert rules now have a configuration option for filtering based on geolocation.
IMPROVEMENTS
* Improved Camera screen for iPad.
* Improved Camera Settings.
FIXES
* Fixed permission issue when the user could not open Camera settings.
* Fixed an issue when controller and camera updates were displayed in Controller tab of Activity screen.
* Fixed an issue when update events were not displayed in Timeline.
* Fixed connectivity issues.
We value your feedback! If you have an idea on how to improve the app, feel free to contact us at mobilefeedback@ubnt.com.
1.2.5
2019-04-02
In this version: initial iPad support and improved push notifications.
NEW FEATURES
* Added initial iPad support.
IMPROVEMENTS
* Improved push notifications.
* Controller update events are displayed in Activity screen.
* Show both primary and current user client device in Account & Cloud.
FIXES
* Fixed an issue when a user could not delete offline controller.
* Fixed an issue when a user could initiate a connection to updating controller.
* Fixed an issue when Magic Zoom values were sometimes calculated incorrectly.
* Fixed an issue when a user could open Camera drawer in Camera Settings.
* Fixed an issue when administrator could not edit his roles.
* Fixed 2FA dialog during controller setup to no longer return user to Controller List when canceling.
* Fixed multiple issues in Clip Export.
* Fixed multiple Timeline drawing artifacts.
We value your feedback! If you have an idea on how to improve the app, feel free to contact us at mobilefeedback@ubnt.com.
1.2.4
2019-03-18
In this version: Timelapse export and Camera List landscape support .
NEW FEATURES
* Added Timelapse export with different fps values (requires controller version 1.9.1+).
* Added landscape support for Camera List.
IMPROVEMENTS
* Improved talkback quality and latency.
* Updating controllers are now displayed in Controller List.
* Navigating using Camera Drawer keeps previous playback position.
FIXES
* Fixed a bug when administrator could factory reset the controller.
* Fixed a bug when user without edit permissions could unmanage cameras.
We value your feedback! If you have an idea how to improve the app, feel free to contact us at mobilefeedback@ubnt.com.
1.2.3
2019-02-04
In this version: custom user roles and stability improvements.
NEW FEATURES
* Added custom roles to define access to specific cameras and functionality (requires controller version 1.6.0+).
* Added Timeline pinch-to-zoom tutorial and scale indicator.
IMPROVEMENTS
* Camera enhance is now conveniently available within video player.
* Improved Timelapse camera tools look and feel.
FIXES
* Fixed stability issues in Camera List and Activity.
* Fixed stability issue while establishing a connection.
We value your feedback! If you have an idea how to improve the app, feel free to contact us at mobilefeedback@ubnt.com.
1.2.2
2019-01-25
In this version: camera list reordering, drawer in camera list and in-app controller updates.
NEW FEATURES
* Added a drawer in Camera List to conveniently access menu.
* Added in-app Protect Controller updates in controller settings.
* Added manual Camera List reordering available by long pressing on a camera.
IMPROVEMENTS
* Improved playback start time precision for recoded video.
FIXES
* Fixed an issue when incorrect controller was selected during setup.
* Fixed stability issues in Controller List.
We value your feedback! If you have an idea how to improve the app, feel free to contact us at mobilefeedback@ubnt.com.
1.2.1
2019-01-10
In this version: camera drawer, new connection screen and in-app controller invites.
NEW FEATURES
* Added camera drawer in Timelapse screen to conveniently switch between cameras.
* Added new Connection screen to better represent connection progress and status.
* Added in-app controller invites support.
* Added camera model icons in Camera Setup screen.
IMPROVEMENTS
* Improved bottom menu.
* Improved date picker.
FIXES
* Fixed multiple stability issues.
We value your feedback! If you have an idea how to improve the app, feel free to contact us at mobilefeedback@ubnt.com.
1.2.0
2018-12-18
In this version: activity alerts and push notifications.
NEW FEATURES
* Added activity alert screen to create and edit alert rules (requires controller version 1.5.0+).
* Added camera motion alerts.
* Added camera offline alerts.
* Added controller offline alerts.
* Added push notification and email support for alerts.
IMPROVEMENTS
* Added confirmation dialog on user deletion.
* Increased activity date selection button touch area.
FIXES
* Fixed an issue when Clip export/delete selection handles were positioned incorrectly.
* Fixed clip delete label display.
* Fixed locally cached timelapse data cleanup on clip delete.
* Removed add camera button for view only users.
We value your feedback! If you have an idea how to improve the app, feel free to contact us at mobilefeedback@ubnt.com.
1.1.1
2018-12-03
In this version: user roles, clip delete, new bottom menu.
NEW FEATURES
Added user roles with Adminstrator and View Only support (Requires controller version 1.4.0+).
Added clip delete.
Added user detail screen.
Added pending invite and resend invite support.
IMPROVEMENTS
Changed bottom menu in Timelapse screen.
Connection screen animation is more responsive.
FIXES
Fixed time mismatch in Activity and Timelapse screens.
Fixed issue when Thumbnails were overlapping offline and other events
We value your feedback! If you have an idea how to improve the app, feel free to contact us at mobilefeedback@ubnt.com.
1.1.0
2018-11-07
In this version: motion and privacy zones, activity, performance improvements.
NEW FEATURES
* Added possibility to create and edit rectangular motion and privacy zones
* Added Activity screen with a list of occurred events
IMPROVEMENTS
* Completely reworked event thumbnail drawing logics
FIXES
* Fixed Camera List screen issue when it was producing too many requests
* Fixed playback resume issue on Clip Export canceling
* Fixed disabled Snapshot button for paused video streams
* Previously opened Camera screen now is reopened only on reconnects
* Improved video playback stability
We value your feedback! If you have an idea how to improve the app, feel free to contact us at mobilefeedback@ubnt.com.
1.0.2
2018-10-25
In this version: video export, stability improvements.
NEW FEATURES
* Added video export to Photo Library.
IMPROVEMENTS
* Added Optical zoom option to Camera settings.
* Added Microphone disable option to Camera settings.
FIXES
* Fixed an issue during camera setup when user was able to continue before all required data was loaded.
* Fixed audio stream processing issue.
* Fixed connection cleanup logics.
* Fixed gyroscope positioning in landscape videos
* Fixed issue with Snapshot creation.
* Fixed a glitch when zooming in player.
We value your feedback! If you have an idea how to improve the app, feel free to contact us at mobilefeedback@ubnt.com.
1.0.1
2018-10-05
In this version: timelapse landscape support, video snapshot, stability improvements.
NEW FEATURES
* Added landscape support for Timelapse.
* Added possibility to make a snapshot in a video and store it in the Photo Library.
IMPROVEMENTS
* Video sound in Camera screen is muted by default.
* Player control buttons touch area is increased for a better user experience.
* "Forgot your password?" link is available in the app.
* Recording playback starts more precisely from scroll stop position. Same applies when tapping on an event thumbnail.
* UI and UX improvements across the whole app.
FIXES
* Fixed timezone format differences between iOS and Android apps.
* Fixed device credential validation and possible unexpected 2FA errors.
* Fixed an issue with an unexpected camera event parsing.
* Fixed memory usage in Camera screen.
* Fixed multiple stability issues.
We value your feedback! If you have an idea how to improve the app, feel free to contact us at mobilefeedback@ubnt.com.