If the number you pick becomes unavailable, you can now pick a new one more easily.
We're sending out updates as soon as they are ready. Here are some other things we've changed and fixed in the last weeks:
Update 2020.19:
If you're not on an unlimited plan, you may have noticed that outgoing calls that didn't connect showed a duration of a few seconds. You weren't ever actually charged for these seconds, but we've now made this more explicit and the duration shows zero seconds. If the person you called was busy, we now also show "Busy" in the call list.
Update 2020.12:
- Playing a video or audio message will now play on the speaker (or headphones if you have them on). Previously, the audio would play through the earpiece, and only if the ring switch was on.
Update 2020.10:
- Fixes bug that caused contacts to not load on the first launch after the update
Update 2020.09:
This release is focused on your three most frequent requests that we've put off for too long! We have some more coming soon, but wanted to get this out ASAP:
- If you have enabled notifications, they will now show your contact's name instead of just the phone number!
- VoIP calling is now more reliable for users behind a firewall or router
- Messages that are successfully sent will show a "Sent" status
Some more details on those for those interested:
- Showing your contact's name in the push notification is something we have wanted to do for a long time, but it is tricky since notifications are sent from our server and we don't upload your contacts. This means we don't have any way to put the caller or text sender's name in the notification since we don't actually have it (this is a good thing!). Now what we do is send the same push notification but have the app intercept it before you see it. It then looks up the phone number in your contacts and replaces the number with the contact's name in the notification. So now you will always know who is texting or calling you! This will work for both iOS and private Unlisted contacts. Of course, this is only for users who have actually enabled access to their contacts and have not set their notifications to "Off" or "Private" — in those cases, you won't see anything new here :)
- VoIP calling is tricky for all kinds of reasons that we have previously solved, but this update will help about 10% of our users whose networks are blocking their audio. At a basic level, a call has two signals: one manages it and the other carries the audio. Sometimes the first signal will get through so the call connects, but then the other signal is blocked so you don't hear anything. This is frustrating to say the least! We now use two techniques to make sure the call connects fully: 1) We are using a STUN server to help your app know where it is on the internet (this is not always obvious when you are behind a firewall), 2) if necessary, we will relay the audio through another server (called a TURN relay) so that your firewall doesn't block it. In the end, these two techniques should make sure that far more calls get connected!
- When sending messages, we show a "Sending..." message below the last bubble. When sent, that status disappears. This has lead many of us to wonder...did it send?!?! (It did.) Well now, instead of removing it, we show "Sent". This one was easy.
We are a small team that frequently adds features that our customers request, so please get in touch if you have an idea for Unlisted! You can always message us in the app, or via email at support@unlistedapp.com. Thanks!
More
2020.21
2020-07-09
If the number you pick becomes unavailable, you can now pick a new one more easily.
We're sending out updates as soon as they are ready. Here are some other things we've changed and fixed in the last weeks:
Update 2020.19:
If you're not on an unlimited plan, you may have noticed that outgoing calls that didn't connect showed a duration of a few seconds. You weren't ever actually charged for these seconds, but we've now made this more explicit and the duration shows zero seconds. If the person you called was busy, we now also show "Busy" in the call list.
Update 2020.12:
- Playing a video or audio message will now play on the speaker (or headphones if you have them on). Previously, the audio would play through the earpiece, and only if the ring switch was on.
Update 2020.10:
- Fixes bug that caused contacts to not load on the first launch after the update
Update 2020.09:
This release is focused on your three most frequent requests that we've put off for too long! We have some more coming soon, but wanted to get this out ASAP:
- If you have enabled notifications, they will now show your contact's name instead of just the phone number!
- VoIP calling is now more reliable for users behind a firewall or router
- Messages that are successfully sent will show a "Sent" status
Some more details on those for those interested:
- Showing your contact's name in the push notification is something we have wanted to do for a long time, but it is tricky since notifications are sent from our server and we don't upload your contacts. This means we don't have any way to put the caller or text sender's name in the notification since we don't actually have it (this is a good thing!). Now what we do is send the same push notification but have the app intercept it before you see it. It then looks up the phone number in your contacts and replaces the number with the contact's name in the notification. So now you will always know who is texting or calling you! This will work for both iOS and private Unlisted contacts. Of course, this is only for users who have actually enabled access to their contacts and have not set their notifications to "Off" or "Private" — in those cases, you won't see anything new here :)
- VoIP calling is tricky for all kinds of reasons that we have previously solved, but this update will help about 10% of our users whose networks are blocking their audio. At a basic level, a call has two signals: one manages it and the other carries the audio. Sometimes the first signal will get through so the call connects, but then the other signal is blocked so you don't hear anything. This is frustrating to say the least! We now use two techniques to make sure the call connects fully: 1) We are using a STUN server to help your app know where it is on the internet (this is not always obvious when you are behind a firewall), 2) if necessary, we will relay the audio through another server (called a TURN relay) so that your firewall doesn't block it. In the end, these two techniques should make sure that far more calls get connected!
- When sending messages, we show a "Sending..." message below the last bubble. When sent, that status disappears. This has lead many of us to wonder...did it send?!?! (It did.) Well now, instead of removing it, we show "Sent". This one was easy.
We are a small team that frequently adds features that our customers request, so please get in touch if you have an idea for Unlisted! You can always message us in the app, or via email at support@unlistedapp.com. Thanks!
2020.20
2020-07-07
If the number you pick becomes unavailable, you can now pick a new one more easily.
We're sending out updates as soon as they are ready. Here are some other things we've changed and fixed in the last weeks:
Update 2020.19:
If you're not on an unlimited plan, you may have noticed that outgoing calls that didn't connect showed a duration of a few seconds. You weren't ever actually charged for these seconds, but we've now made this more explicit and the duration shows zero seconds. If the person you called was busy, we now also show "Busy" in the call list.
Update 2020.12:
- Playing a video or audio message will now play on the speaker (or headphones if you have them on). Previously, the audio would play through the earpiece, and only if the ring switch was on.
Update 2020.10:
- Fixes bug that caused contacts to not load on the first launch after the update
Update 2020.09:
This release is focused on your three most frequent requests that we've put off for too long! We have some more coming soon, but wanted to get this out ASAP:
- If you have enabled notifications, they will now show your contact's name instead of just the phone number!
- VoIP calling is now more reliable for users behind a firewall or router
- Messages that are successfully sent will show a "Sent" status
Some more details on those for those interested:
- Showing your contact's name in the push notification is something we have wanted to do for a long time, but it is tricky since notifications are sent from our server and we don't upload your contacts. This means we don't have any way to put the caller or text sender's name in the notification since we don't actually have it (this is a good thing!). Now what we do is send the same push notification but have the app intercept it before you see it. It then looks up the phone number in your contacts and replaces the number with the contact's name in the notification. So now you will always know who is texting or calling you! This will work for both iOS and private Unlisted contacts. Of course, this is only for users who have actually enabled access to their contacts and have not set their notifications to "Off" or "Private" — in those cases, you won't see anything new here :)
- VoIP calling is tricky for all kinds of reasons that we have previously solved, but this update will help about 10% of our users whose networks are blocking their audio. At a basic level, a call has two signals: one manages it and the other carries the audio. Sometimes the first signal will get through so the call connects, but then the other signal is blocked so you don't hear anything. This is frustrating to say the least! We now use two techniques to make sure the call connects fully: 1) We are using a STUN server to help your app know where it is on the internet (this is not always obvious when you are behind a firewall), 2) if necessary, we will relay the audio through another server (called a TURN relay) so that your firewall doesn't block it. In the end, these two techniques should make sure that far more calls get connected!
- When sending messages, we show a "Sending..." message below the last bubble. When sent, that status disappears. This has lead many of us to wonder...did it send?!?! (It did.) Well now, instead of removing it, we show "Sent". This one was easy.
We are a small team that frequently adds features that our customers request, so please get in touch if you have an idea for Unlisted! You can always message us in the app, or via email at support@unlistedapp.com. Thanks!
2020.19
2020-07-03
If you're not on an unlimited plan, you may have noticed that outgoing calls that didn't connect showed a duration of a few seconds. You weren't ever actually charged for these seconds, but we've now made this more explicit and the duration shows zero seconds. If the person you called was busy, we now also show "Busy" in the call list.
We're sending out updates as soon as they are ready. Here are some other things we've changed and fixed in the last weeks:
Update 2020.12:
- Playing a video or audio message will now play on the speaker (or headphones if you have them on). Previously, the audio would play through the earpiece, and only if the ring switch was on.
Update 2020.10:
- Fixes bug that caused contacts to not load on the first launch after the update
Update 2020.09:
This release is focused on your three most frequent requests that we've put off for too long! We have some more coming soon, but wanted to get this out ASAP:
- If you have enabled notifications, they will now show your contact's name instead of just the phone number!
- VoIP calling is now more reliable for users behind a firewall or router
- Messages that are successfully sent will show a "Sent" status
Some more details on those for those interested:
- Showing your contact's name in the push notification is something we have wanted to do for a long time, but it is tricky since notifications are sent from our server and we don't upload your contacts. This means we don't have any way to put the caller or text sender's name in the notification since we don't actually have it (this is a good thing!). Now what we do is send the same push notification but have the app intercept it before you see it. It then looks up the phone number in your contacts and replaces the number with the contact's name in the notification. So now you will always know who is texting or calling you! This will work for both iOS and private Unlisted contacts. Of course, this is only for users who have actually enabled access to their contacts and have not set their notifications to "Off" or "Private" — in those cases, you won't see anything new here :)
- VoIP calling is tricky for all kinds of reasons that we have previously solved, but this update will help about 10% of our users whose networks are blocking their audio. At a basic level, a call has two signals: one manages it and the other carries the audio. Sometimes the first signal will get through so the call connects, but then the other signal is blocked so you don't hear anything. This is frustrating to say the least! We now use two techniques to make sure the call connects fully: 1) We are using a STUN server to help your app know where it is on the internet (this is not always obvious when you are behind a firewall), 2) if necessary, we will relay the audio through another server (called a TURN relay) so that your firewall doesn't block it. In the end, these two techniques should make sure that far more calls get connected!
- When sending messages, we show a "Sending..." message below the last bubble. When sent, that status disappears. This has lead many of us to wonder...did it send?!?! (It did.) Well now, instead of removing it, we show "Sent". This one was easy.
We are a small team that frequently adds features that our customers request, so please get in touch if you have an idea for Unlisted! You can always message us in the app, or via email at support@unlistedapp.com. Thanks!
2020.18
2020-07-01
This update fixes a few things under the hood. Most of you won't notice a thing, the rest of you might see things running a bit smoother!
We're sending out updates as soon as they are ready. Here are some other things we've changed and fixed in the last days:
Update 2020.12:
- Playing a video or audio message will now play on the speaker (or headphones if you have them on). Previously, the audio would play through the earpiece, and only if the ring switch was on.
Update 2020.10:
- Fixes bug that caused contacts to not load on the first launch after the update
Update 2020.09:
This release is focused on your three most frequent requests that we've put off for too long! We have some more coming soon, but wanted to get this out ASAP:
- If you have enabled notifications, they will now show your contact's name instead of just the phone number!
- VoIP calling is now more reliable for users behind a firewall or router
- Messages that are successfully sent will show a "Sent" status
Some more details on those for those interested:
- Showing your contact's name in the push notification is something we have wanted to do for a long time, but it is tricky since notifications are sent from our server and we don't upload your contacts. This means we don't have any way to put the caller or text sender's name in the notification since we don't actually have it (this is a good thing!). Now what we do is send the same push notification but have the app intercept it before you see it. It then looks up the phone number in your contacts and replaces the number with the contact's name in the notification. So now you will always know who is texting or calling you! This will work for both iOS and private Unlisted contacts. Of course, this is only for users who have actually enabled access to their contacts and have not set their notifications to "Off" or "Private" — in those cases, you won't see anything new here :)
- VoIP calling is tricky for all kinds of reasons that we have previously solved, but this update will help about 10% of our users whose networks are blocking their audio. At a basic level, a call has two signals: one manages it and the other carries the audio. Sometimes the first signal will get through so the call connects, but then the other signal is blocked so you don't hear anything. This is frustrating to say the least! We now use two techniques to make sure the call connects fully: 1) We are using a STUN server to help your app know where it is on the internet (this is not always obvious when you are behind a firewall), 2) if necessary, we will relay the audio through another server (called a TURN relay) so that your firewall doesn't block it. In the end, these two techniques should make sure that far more calls get connected!
- When sending messages, we show a "Sending..." message below the last bubble. When sent, that status disappears. This has lead many of us to wonder...did it send?!?! (It did.) Well now, instead of removing it, we show "Sent". This one was easy.
We are a small team that frequently adds features that our customers request, so please get in touch if you have an idea for Unlisted! You can always message us in the app, or via email at support@unlistedapp.com. Thanks!
2020.17
2020-06-02
This update fixes a few things under the hood. Most of you won't notice a thing, the rest of you might see things running a bit smoother!
We're sending out updates as soon as they are ready. Here are some other things we've changed and fixed in the last days:
Update 2020.12:
- Playing a video or audio message will now play on the speaker (or headphones if you have them on). Previously, the audio would play through the earpiece, and only if the ring switch was on.
Update 2020.10:
- Fixes bug that caused contacts to not load on the first launch after the update
Update 2020.09:
This release is focused on your three most frequent requests that we've put off for too long! We have some more coming soon, but wanted to get this out ASAP:
- If you have enabled notifications, they will now show your contact's name instead of just the phone number!
- VoIP calling is now more reliable for users behind a firewall or router
- Messages that are successfully sent will show a "Sent" status
Some more details on those for those interested:
- Showing your contact's name in the push notification is something we have wanted to do for a long time, but it is tricky since notifications are sent from our server and we don't upload your contacts. This means we don't have any way to put the caller or text sender's name in the notification since we don't actually have it (this is a good thing!). Now what we do is send the same push notification but have the app intercept it before you see it. It then looks up the phone number in your contacts and replaces the number with the contact's name in the notification. So now you will always know who is texting or calling you! This will work for both iOS and private Unlisted contacts. Of course, this is only for users who have actually enabled access to their contacts and have not set their notifications to "Off" or "Private" — in those cases, you won't see anything new here :)
- VoIP calling is tricky for all kinds of reasons that we have previously solved, but this update will help about 10% of our users whose networks are blocking their audio. At a basic level, a call has two signals: one manages it and the other carries the audio. Sometimes the first signal will get through so the call connects, but then the other signal is blocked so you don't hear anything. This is frustrating to say the least! We now use two techniques to make sure the call connects fully: 1) We are using a STUN server to help your app know where it is on the internet (this is not always obvious when you are behind a firewall), 2) if necessary, we will relay the audio through another server (called a TURN relay) so that your firewall doesn't block it. In the end, these two techniques should make sure that far more calls get connected!
- When sending messages, we show a "Sending..." message below the last bubble. When sent, that status disappears. This has lead many of us to wonder...did it send?!?! (It did.) Well now, instead of removing it, we show "Sent". This one was easy.
We are a small team that frequently adds features that our customers request, so please get in touch if you have an idea for Unlisted! You can always message us in the app, or via email at support@unlistedapp.com. Thanks!
2020.16
2020-05-29
This update fixes a few things under the hood. Most of you won't notice a thing, the rest of you might see things running a bit smoother!
We're sending out updates as soon as they are ready. Here are some other things we've changed and fixed in the last days:
Update 2020.12:
- Playing a video or audio message will now play on the speaker (or headphones if you have them on). Previously, the audio would play through the earpiece, and only if the ring switch was on.
Update 2020.10:
- Fixes bug that caused contacts to not load on the first launch after the update
Update 2020.09:
This release is focused on your three most frequent requests that we've put off for too long! We have some more coming soon, but wanted to get this out ASAP:
- If you have enabled notifications, they will now show your contact's name instead of just the phone number!
- VoIP calling is now more reliable for users behind a firewall or router
- Messages that are successfully sent will show a "Sent" status
Some more details on those for those interested:
- Showing your contact's name in the push notification is something we have wanted to do for a long time, but it is tricky since notifications are sent from our server and we don't upload your contacts. This means we don't have any way to put the caller or text sender's name in the notification since we don't actually have it (this is a good thing!). Now what we do is send the same push notification but have the app intercept it before you see it. It then looks up the phone number in your contacts and replaces the number with the contact's name in the notification. So now you will always know who is texting or calling you! This will work for both iOS and private Unlisted contacts. Of course, this is only for users who have actually enabled access to their contacts and have not set their notifications to "Off" or "Private" — in those cases, you won't see anything new here :)
- VoIP calling is tricky for all kinds of reasons that we have previously solved, but this update will help about 10% of our users whose networks are blocking their audio. At a basic level, a call has two signals: one manages it and the other carries the audio. Sometimes the first signal will get through so the call connects, but then the other signal is blocked so you don't hear anything. This is frustrating to say the least! We now use two techniques to make sure the call connects fully: 1) We are using a STUN server to help your app know where it is on the internet (this is not always obvious when you are behind a firewall), 2) if necessary, we will relay the audio through another server (called a TURN relay) so that your firewall doesn't block it. In the end, these two techniques should make sure that far more calls get connected!
- When sending messages, we show a "Sending..." message below the last bubble. When sent, that status disappears. This has lead many of us to wonder...did it send?!?! (It did.) Well now, instead of removing it, we show "Sent". This one was easy.
We are a small team that frequently adds features that our customers request, so please get in touch if you have an idea for Unlisted! You can always message us in the app, or via email at support@unlistedapp.com. Thanks!
2020.15
2020-05-24
This update fixes a few things under the hood. Most of you won't notice a thing, the rest of you might see things running a bit smoother!
We're sending out updates as soon as they are ready. Here are some other things we've changed and fixed in the last days:
Update 2020.12:
- Playing a video or audio message will now play on the speaker (or headphones if you have them on). Previously, the audio would play through the earpiece, and only if the ring switch was on.
Update 2020.10:
- Fixes bug that caused contacts to not load on the first launch after the update
Update 2020.09:
This release is focused on your three most frequent requests that we've put off for too long! We have some more coming soon, but wanted to get this out ASAP:
- If you have enabled notifications, they will now show your contact's name instead of just the phone number!
- VoIP calling is now more reliable for users behind a firewall or router
- Messages that are successfully sent will show a "Sent" status
Some more details on those for those interested:
- Showing your contact's name in the push notification is something we have wanted to do for a long time, but it is tricky since notifications are sent from our server and we don't upload your contacts. This means we don't have any way to put the caller or text sender's name in the notification since we don't actually have it (this is a good thing!). Now what we do is send the same push notification but have the app intercept it before you see it. It then looks up the phone number in your contacts and replaces the number with the contact's name in the notification. So now you will always know who is texting or calling you! This will work for both iOS and private Unlisted contacts. Of course, this is only for users who have actually enabled access to their contacts and have not set their notifications to "Off" or "Private" — in those cases, you won't see anything new here :)
- VoIP calling is tricky for all kinds of reasons that we have previously solved, but this update will help about 10% of our users whose networks are blocking their audio. At a basic level, a call has two signals: one manages it and the other carries the audio. Sometimes the first signal will get through so the call connects, but then the other signal is blocked so you don't hear anything. This is frustrating to say the least! We now use two techniques to make sure the call connects fully: 1) We are using a STUN server to help your app know where it is on the internet (this is not always obvious when you are behind a firewall), 2) if necessary, we will relay the audio through another server (called a TURN relay) so that your firewall doesn't block it. In the end, these two techniques should make sure that far more calls get connected!
- When sending messages, we show a "Sending..." message below the last bubble. When sent, that status disappears. This has lead many of us to wonder...did it send?!?! (It did.) Well now, instead of removing it, we show "Sent". This one was easy.
We are a small team that frequently adds features that our customers request, so please get in touch if you have an idea for Unlisted! You can always message us in the app, or via email at support@unlistedapp.com. Thanks!
2020.14
2020-05-20
This update fixes a few things under the hood. Most of you won't notice a thing, the rest of you might see things running a bit smoother!
We're sending out updates as soon as they are ready. Here are some other things we've changed and fixed in the last days:
Update 2020.12:
- Playing a video or audio message will now play on the speaker (or headphones if you have them on). Previously, the audio would play through the earpiece, and only if the ring switch was on.
Update 2020.10:
- Fixes bug that caused contacts to not load on the first launch after the update
Update 2020.09:
This release is focused on your three most frequent requests that we've put off for too long! We have some more coming soon, but wanted to get this out ASAP:
- If you have enabled notifications, they will now show your contact's name instead of just the phone number!
- VoIP calling is now more reliable for users behind a firewall or router
- Messages that are successfully sent will show a "Sent" status
Some more details on those for those interested:
- Showing your contact's name in the push notification is something we have wanted to do for a long time, but it is tricky since notifications are sent from our server and we don't upload your contacts. This means we don't have any way to put the caller or text sender's name in the notification since we don't actually have it (this is a good thing!). Now what we do is send the same push notification but have the app intercept it before you see it. It then looks up the phone number in your contacts and replaces the number with the contact's name in the notification. So now you will always know who is texting or calling you! This will work for both iOS and private Unlisted contacts. Of course, this is only for users who have actually enabled access to their contacts and have not set their notifications to "Off" or "Private" — in those cases, you won't see anything new here :)
- VoIP calling is tricky for all kinds of reasons that we have previously solved, but this update will help about 10% of our users whose networks are blocking their audio. At a basic level, a call has two signals: one manages it and the other carries the audio. Sometimes the first signal will get through so the call connects, but then the other signal is blocked so you don't hear anything. This is frustrating to say the least! We now use two techniques to make sure the call connects fully: 1) We are using a STUN server to help your app know where it is on the internet (this is not always obvious when you are behind a firewall), 2) if necessary, we will relay the audio through another server (called a TURN relay) so that your firewall doesn't block it. In the end, these two techniques should make sure that far more calls get connected!
- When sending messages, we show a "Sending..." message below the last bubble. When sent, that status disappears. This has lead many of us to wonder...did it send?!?! (It did.) Well now, instead of removing it, we show "Sent". This one was easy.
We are a small team that frequently adds features that our customers request, so please get in touch if you have an idea for Unlisted! You can always message us in the app, or via email at support@unlistedapp.com. Thanks!
2020.13
2020-05-19
This update fixes a few things under the hood. Most of you won't notice a thing, the rest of you might see things running a bit smoother!
We're sending out updates as soon as they are ready. Here are some other things we've changed and fixed in the last days:
Update 2020.12:
- Playing a video or audio message will now play on the speaker (or headphones if you have them on). Previously, the audio would play through the earpiece, and only if the ring switch was on.
Update 2020.10:
- Fixes bug that caused contacts to not load on the first launch after the update
Update 2020.09:
This release is focused on your three most frequent requests that we've put off for too long! We have some more coming soon, but wanted to get this out ASAP:
- If you have enabled notifications, they will now show your contact's name instead of just the phone number!
- VoIP calling is now more reliable for users behind a firewall or router
- Messages that are successfully sent will show a "Sent" status
Some more details on those for those interested:
- Showing your contact's name in the push notification is something we have wanted to do for a long time, but it is tricky since notifications are sent from our server and we don't upload your contacts. This means we don't have any way to put the caller or text sender's name in the notification since we don't actually have it (this is a good thing!). Now what we do is send the same push notification but have the app intercept it before you see it. It then looks up the phone number in your contacts and replaces the number with the contact's name in the notification. So now you will always know who is texting or calling you! This will work for both iOS and private Unlisted contacts. Of course, this is only for users who have actually enabled access to their contacts and have not set their notifications to "Off" or "Private" — in those cases, you won't see anything new here :)
- VoIP calling is tricky for all kinds of reasons that we have previously solved, but this update will help about 10% of our users whose networks are blocking their audio. At a basic level, a call has two signals: one manages it and the other carries the audio. Sometimes the first signal will get through so the call connects, but then the other signal is blocked so you don't hear anything. This is frustrating to say the least! We now use two techniques to make sure the call connects fully: 1) We are using a STUN server to help your app know where it is on the internet (this is not always obvious when you are behind a firewall), 2) if necessary, we will relay the audio through another server (called a TURN relay) so that your firewall doesn't block it. In the end, these two techniques should make sure that far more calls get connected!
- When sending messages, we show a "Sending..." message below the last bubble. When sent, that status disappears. This has lead many of us to wonder...did it send?!?! (It did.) Well now, instead of removing it, we show "Sent". This one was easy.
We are a small team that frequently adds features that our customers request, so please get in touch if you have an idea for Unlisted! You can always message us in the app, or via email at support@unlistedapp.com. Thanks!
2020.12
2020-05-15
Playing a video or audio message will now play on the speaker (or headphones if you have them on). Previously, the audio would play through the earpiece, and only if the ring switch was on.
We're sending out updates as soon as they are ready. Here are some other things we've released in the last few days:
Update 2020.10:
- Fixes bug that caused contacts to not load on the first launch after the update
Update v2020.09:
This release is focused on your three most frequent requests that we've put off for too long! We have some more coming soon, but wanted to get this out ASAP:
- If you have enabled notifications, they will now show your contact's name instead of just the phone number!
- VoIP calling is now more reliable for users behind a firewall or router
- Messages that are successfully sent will show a "Sent" status
Some more details on those for those interested:
- Showing your contact's name in the push notification is something we have wanted to do for a long time, but it is tricky since notifications are sent from our server and we don't upload your contacts. This means we don't have any way to put the caller or text sender's name in the notification since we don't actually have it (this is a good thing!). Now what we do is send the same push notification but have the app intercept it before you see it. It then looks up the phone number in your contacts and replaces the number with the contact's name in the notification. So now you will always know who is texting or calling you! This will work for both iOS and private Unlisted contacts. Of course, this is only for users who have actually enabled access to their contacts and have not set their notifications to "Off" or "Private" — in those cases, you won't see anything new here :)
- VoIP calling is tricky for all kinds of reasons that we have previously solved, but this update will help about 10% of our users whose networks are blocking their audio. At a basic level, a call has two signals: one manages it and the other carries the audio. Sometimes the first signal will get through so the call connects, but then the other signal is blocked so you don't hear anything. This is frustrating to say the least! We now use two techniques to make sure the call connects fully: 1) We are using a STUN server to help your app know where it is on the internet (this is not always obvious when you are behind a firewall), 2) if necessary, we will relay the audio through another server (called a TURN relay) so that your firewall doesn't block it. In the end, these two techniques should make sure that far more calls get connected!
- When sending messages, we show a "Sending..." message below the last bubble. When sent, that status disappears. This has lead many of us to wonder...did it send?!?! (It did.) Well now, instead of removing it, we show "Sent". This one was easy.
We are a small team that frequently adds features that our customers request, so please get in touch if you have an idea for Unlisted! You can always message us in the app, or via email at support@unlistedapp.com. Thanks!
2020.11
2020-05-14
Playing a video or audio message will now play on the speaker (or headphones if you have them on). Previously, the audio would play through the earpiece, and only if the ring switch was on.
We're sending out updates as soon as they are ready. Here are some other things we've released in the last few days:
Update 2020.10:
- Fixes bug that caused contacts to not load on the first launch after the update
Update v2020.09:
This release is focused on your three most frequent requests that we've put off for too long! We have some more coming soon, but wanted to get this out ASAP:
- If you have enabled notifications, they will now show your contact's name instead of just the phone number!
- VoIP calling is now more reliable for users behind a firewall or router
- Messages that are successfully sent will show a "Sent" status
Some more details on those for those interested:
- Showing your contact's name in the push notification is something we have wanted to do for a long time, but it is tricky since notifications are sent from our server and we don't upload your contacts. This means we don't have any way to put the caller or text sender's name in the notification since we don't actually have it (this is a good thing!). Now what we do is send the same push notification but have the app intercept it before you see it. It then looks up the phone number in your contacts and replaces the number with the contact's name in the notification. So now you will always know who is texting or calling you! This will work for both iOS and private Unlisted contacts. Of course, this is only for users who have actually enabled access to their contacts and have not set their notifications to "Off" or "Private" — in those cases, you won't see anything new here :)
- VoIP calling is tricky for all kinds of reasons that we have previously solved, but this update will help about 10% of our users whose networks are blocking their audio. At a basic level, a call has two signals: one manages it and the other carries the audio. Sometimes the first signal will get through so the call connects, but then the other signal is blocked so you don't hear anything. This is frustrating to say the least! We now use two techniques to make sure the call connects fully: 1) We are using a STUN server to help your app know where it is on the internet (this is not always obvious when you are behind a firewall), 2) if necessary, we will relay the audio through another server (called a TURN relay) so that your firewall doesn't block it. In the end, these two techniques should make sure that far more calls get connected!
- When sending messages, we show a "Sending..." message below the last bubble. When sent, that status disappears. This has lead many of us to wonder...did it send?!?! (It did.) Well now, instead of removing it, we show "Sent". This one was easy.
We are a small team that frequently adds features that our customers request, so please get in touch if you have an idea for Unlisted! You can always message us in the app, or via email at support@unlistedapp.com. Thanks!
2020.10
2020-05-12
** The last update caused some users' contacts to not load on the first launch after update. They are safe, there was just a bug displaying them. This update fixes the issue. Read below for details about the previous update:
Update v2020.09:
This release is focused on your three most frequent requests that we've put off for too long! We have some more coming soon, but wanted to get this out ASAP:
- If you have enabled notifications, they will now show your contact's name instead of just the phone number!
- VoIP calling is now more reliable for users behind a firewall or router
- Messages that are successfully sent will show a "Sent" status
Some more details on those for those interested:
- Showing your contact's name in the push notification is something we have wanted to do for a long time, but it is tricky since notifications are sent from our server and we don't upload your contacts. This means we don't have any way to put the caller or text sender's name in the notification since we don't actually have it (this is a good thing!). Now what we do is send the same push notification but have the app intercept it before you see it. It then looks up the phone number in your contacts and replaces the number with the contact's name in the notification. So now you will always know who is texting or calling you! This will work for both iOS and private Unlisted contacts. Of course, this is only for users who have actually enabled access to their contacts and have not set their notifications to "Off" or "Private" — in those cases, you won't see anything new here :)
- VoIP calling is tricky for all kinds of reasons that we have previously solved, but this update will help about 10% of our users whose networks are blocking their audio. At a basic level, a call has two signals: one manages it and the other carries the audio. Sometimes the first signal will get through so the call connects, but then the other signal is blocked so you don't hear anything. This is frustrating to say the least! We now use two techniques to make sure the call connects fully: 1) We are using a STUN server to help your app know where it is on the internet (this is not always obvious when you are behind a firewall), 2) if necessary, we will relay the audio through another server (called a TURN relay) so that your firewall doesn't block it. In the end, these two techniques should make sure that far more calls get connected!
- When sending messages, we show a "Sending..." message below the last bubble. When sent, that status disappears. This has lead many of us to wonder...did it send?!?! (It did.) Well now, instead of removing it, we show "Sent". This one was easy.
We are a small team that frequently adds features that our customers request, so please get in touch if you have an idea for Unlisted! You can always message us in the app, or via email at support@unlistedapp.com. Thanks!
2020.09
2020-05-12
This release is focused on your three most frequent requests that we've put off for too long! We have some more coming soon, but wanted to get this out ASAP:
- If you have enabled notifications, they will now show your contact's name instead of just the phone number!
- VoIP calling is now more reliable for users behind a firewall or router
- Messages that are successfully sent will show a "Sent" status
Some more details on those for those interested:
- Showing your contact's name in the push notification is something we have wanted to do for a long time, but it is tricky since notifications are sent from our server and we don't upload your contacts. This means we don't have any way to put the caller or text sender's name in the notification since we don't actually have it (this is a good thing!). Now what we do is send the same push notification but have the app intercept it before you see it. It then looks up the phone number in your contacts and replaces the number with the contact's name in the notification. So now you will always know who is texting or calling you! This will work for both iOS and private Unlisted contacts. Of course, this is only for users who have actually enabled access to their contacts and have not set their notifications to "Off" or "Private" — in those cases, you won't see anything new here :)
- VoIP calling is tricky for all kinds of reasons that we have previously solved, but this update will help about 10% of our users whose networks are blocking their audio. At a basic level, a call has two signals: one manages it and the other carries the audio. Sometimes the first signal will get through so the call connects, but then the other signal is blocked so you don't hear anything. This is frustrating to say the least! We now use two techniques to make sure the call connects fully: 1) We are using a STUN server to help your app know where it is on the internet (this is not always obvious when you are behind a firewall), 2) if necessary, we will relay the audio through another server (called a TURN relay) so that your firewall doesn't block it. In the end, these two techniques should make sure that far more calls get connected!
- When sending messages, we show a "Sending..." message below the last bubble. When sent, that status disappears. This has lead many of us to wonder...did it send?!?! (It did.) Well now, instead of removing it, we show "Sent". This one was easy.
We are a small team that frequently adds features that our customers request, so please get in touch if you have an idea for Unlisted! You can always message us in the app, or via email at support@unlistedapp.com. Thanks!
2020.08
2020-05-10
This release is focused on your three most frequent requests that we've put off for too long! We have some more coming soon, but wanted to get this out ASAP:
- If you have enabled notifications, they will now show your contact's name instead of just the phone number!
- VoIP calling is now more reliable for users behind a firewall or router
- Messages that are successfully sent will show a "Sent" status
Some more details on those for those interested:
- Showing your contact's name in the push notification is something we have wanted to do for a long time, but it is tricky since notifications are sent from our server and we don't upload your contacts. This means we don't have any way to put the caller or text sender's name in the notification since we don't actually have it (this is a good thing!). Now what we do is send the same push notification but have the app intercept it before you see it. It then looks up the phone number in your contacts and replaces the number with the contact's name in the notification. So now you will always know who is texting or calling you! This will work for both iOS and private Unlisted contacts. Of course, this is only for users who have actually enabled access to their contacts and have not set their notifications to "Off" or "Private" — in those cases, you won't see anything new here :)
- VoIP calling is tricky for all kinds of reasons that we have previously solved, but this update will help about 10% of our users whose networks are blocking their audio. At a basic level, a call has two signals: one manages it and the other carries the audio. Sometimes the first signal will get through so the call connects, but then the other signal is blocked so you don't hear anything. This is frustrating to say the least! We now use two techniques to make sure the call connects fully: 1) We are using a STUN server to help your app know where it is on the internet (this is not always obvious when you are behind a firewall), 2) if necessary, we will relay the audio through another server (called a TURN relay) so that your firewall doesn't block it. In the end, these two techniques should make sure that far more calls get connected!
- When sending messages, we show a "Sending..." message below the last bubble. When sent, that status disappears. This has lead many of us to wonder...did it send?!?! (It did.) Well now, instead of removing it, we show "Sent". This one was easy.
We are a small team that frequently adds features that our customers request, so please get in touch if you have an idea for Unlisted! You can always message us in the app, or via email at support@unlistedapp.com. Thanks!
2020.07
2020-05-06
This update contains a few small updates to our VoIP calling engine. We have also fixed an issue that caused our heaviest users the occassional hang when renewing their numbers.
We are a small team that frequently adds features that our customers request, so please get in touch if you have an idea for Unlisted! You can always message us in the app, or via email at support@unlistedapp.com. Thanks!
2020.06
2020-04-22
This update fixes a few nagging issues to make your life easier. Specifically, if you are adding a number with a free credit, we have added a confirmation step so you make sure to get the number you want. We've also fixed an issue that prevented you from picking a new number should your initial choice turn out to be no longer available.
We are a small team that frequently adds features that our customers request, so please get in touch if you have an idea for Unlisted! You can always message us in the app, or via email at support@unlistedapp.com. Thanks!
2020.05
2020-04-02
This update fixes a few small bugs under the hood. Specifically, we have updated our VoIP calling engine to ensure a better connection when changing networks (i.e. from WiFi to cellular).
We are a small team that frequently adds features that our customers request, so please get in touch if you have an idea for Unlisted! You can always message us in the app, or via email at support@unlistedapp.com. Thanks!
2020.04
2020-03-09
This update fixes a few small bugs under the hood. A few of you may notice that some things run a bit more smoothly; the rest of you won't notice anything at all!
We are a small team that frequently adds features that our customers request, so please get in touch if you have an idea for Unlisted! You can always message us in the app, or via email at support@unlistedapp.com. Thanks!
2020.03
2020-03-04
This update fixes a few small bugs under the hood. A few of you may notice that some things run a bit more smoothly; the rest of you won't notice anything at all!
We are a small team that frequently adds features that our customers request, so please get in touch if you have an idea for Unlisted! You can always message us in the app, or via email at support@unlistedapp.com. Thanks!
2020.01
2020-01-22
This update fixes a few small bugs under the hood. A few of you may notice that some things run a bit more smoothly; the rest of you won't notice anything at all!
We are a small team that frequently adds features that our customers request, so please get in touch if you have an idea for Unlisted! You can always message us in the app, or via email at support@unlistedapp.com. Thanks!
2019.13
2019-12-10
This one is a small but exciting update: we've made the missed call notifications more informative so you know who called and which number they called! We're sorry it took so long to make this happen.
What else would you like to see in Unlisted? Let us know - support@unlistedapp.com
== New in 2019.12 ==
You can now transfer private contacts into Unlisted and get them off your phone. We've also added a logout button in the settings. And we fixed the ability to delete your numbers. You will find this option in each number's options menu. Finally, we renamed the "Unlisted Bot" to "Unlisted Support" since we are actually on the other end (and are pretty sure we're not robots).
We are a small team that frequently adds features that our customers request, so please get in touch if you have an idea for Unlisted! You can always message us in the app, or via email at support@unlistedapp.com. Thanks!
== New in 2019.11 ==
Unlimited usage of real phone numbers to call & text anyone. Try it free! Your personal caller ID is hidden and not connected in any way, just like with all of our plans.
We now offer unlimited plans for $9.99 after a free three day trial. You can get a new number or upgrade your existing prepaid numbers. If you'd like to upgrade an existing subscription plan, please contact Support and we'd be happy to help you out.
Of course, you can always stick with our pay-as-you-go plans depending on what you need from your second number. They aren't going anywhere, we promise!
Important note: This update will require you to log in again. Please use the same email address that you setup your account with (or later added/updated in settings) so that we can log you in to the same account with all of your Unlisted numbers and data. If you have trouble finding the correct email address, please contact us at support@unlistedapp.com and we'd be happy to help out. Your best bet is to look for an email from getkeepsafe.com.
This update has a ton of huge updates under the hood, including optimizations to make the app quicker and snappier overall, but we wanted to call out one more huge update: our new VoIP calling system. We've re-implemented it from the ground up and you will see that not only are calls quicker to connect, but also more reliable and with better audio quality.
We think you're going to be really happy with the new Unlisted!
If you ever have any questions or think we can help with something, please send us an email at support@unlistedapp.com. If it is a question about your account, the best way is to contact us from inside the app (in the side menu), so that we can see your account information. Thank you!
2019.12
2019-11-20
You can now transfer private contacts into Unlisted and get them off your phone. We've also added a logout button in the settings. And we fixed the ability to delete your numbers. You will find this option in each number's options menu. Finally, we renamed the "Unlisted Bot" to "Unlisted Support" since we are actually on the other end (and are pretty sure we're not robots).
We are a small team that frequently adds features that our customers request, so please get in touch if you have an idea for Unlisted! You can always message us in the app, or via email at support@unlistedapp.com. Thanks!
== New in the last release, 2019.11 ==
Unlimited usage of real phone numbers to call & text anyone. Try it free! Your personal caller ID is hidden and not connected in any way, just like with all of our plans.
We now offer unlimited plans for $9.99 after a free three day trial. You can get a new number or upgrade your existing prepaid numbers. If you'd like to upgrade an existing subscription plan, please contact Support and we'd be happy to help you out.
Of course, you can always stick with our pay-as-you-go plans depending on what you need from your second number. They aren't going anywhere, we promise!
Important note: This update will require you to log in again. Please use the same email address that you setup your account with (or later added/updated in settings) so that we can log you in to the same account with all of your Unlisted numbers and data. If you have trouble finding the correct email address, please contact us at support@unlistedapp.com and we'd be happy to help out. Your best bet is to look for an email from getkeepsafe.com.
This update has a ton of huge updates under the hood, including optimizations to make the app quicker and snappier overall, but we wanted to call out one more huge update: our new VoIP calling system. We've re-implemented it from the ground up and you will see that not only are calls quicker to connect, but also more reliable and with better audio quality.
We think you're going to be really happy with the new Unlisted!
If you ever have any questions or think we can help with something, please send us an email at support@unlistedapp.com. If it is a question about your account, the best way is to contact us from inside the app (in the side menu), so that we can see your account information. Thank you!
2019.11
2019-11-08
Try our unlimited calling and texting plans for free! Your personal caller ID is hidden and not connected in any way, just like with all of our plans.
We now offer unlimited plans for $9.99 after a free three day trial. You can get a new number or upgrade your existing prepaid numbers. If you'd like to upgrade an existing subscription plan, please contact Support and we'd be happy to help you out.
Of course, you can always stick with our pay-as-you-go plans depending on what you need from your second number. They aren't going anywhere, we promise!
Important note: This update will require you to log in again. Please use the same email address that you setup your account with (or later added/updated in settings) so that we can log you in to the same account with all of your Unlisted numbers and data. If you have trouble finding the correct email address, please contact us at support@unlistedapp.com and we'd be happy to help out. Your best bet is to look for an email from getkeepsafe.com.
This update has a ton of huge updates under the hood, including optimizations to make the app quicker and snappier overall, but we wanted to call out one more huge update: our new VoIP calling system. We've re-implemented it from the ground up and you will see that not only are calls quicker to connect, but also more reliable and with better audio quality.
We think you're going to be really happy with the new Unlisted!
If you ever have any questions or think we can help with something, please send us an email at support@unlistedapp.com. If it is a question about your account, the best way is to contact us from inside the app (in the side menu, under Settings), so that we can see your account information. Thank you!
4.0.3
2019-11-04
Unlimited usage of real phone numbers to call & text anyone. Try it free! Your personal caller ID is hidden and not connected in any way, just like with all of our plans.
We now offer unlimited plans for $9.99 after a free three day trial. You can get a new number or upgrade your existing prepaid numbers. If you'd like to upgrade an existing subscription plan, please contact Support and we'd be happy to help you out.
Of course, you can always stick with our pay-as-you-go plans depending on what you need from your second number. They aren't going anywhere, we promise!
Important note: This update will require you to log in again. Please use the same email address that you setup your account with (or later added/updated in settings) so that we can log you in to the same account with all of your Unlisted numbers and data. If you have trouble finding the correct email address, please contact us at support@unlistedapp.com and we'd be happy to help out. Your best bet is to look for an email from getkeepsafe.com.
This update has a ton of huge updates under the hood, including optimizations to make the app quicker and snappier overall, but we wanted to call out one more huge update: our new VoIP calling system. We've re-implemented it from the ground up and you will see that not only are calls quicker to connect, but also more reliable and with better audio quality.
We think you're going to be really happy with the new Unlisted!
If you ever have any questions or think we can help with something, please send us an email at support@unlistedapp.com. If it is a question about your account, the best way is to contact us from inside the app (in the side menu), so that we can see your account information. Thank you!
4.0.2
2019-11-02
Unlimited usage of real phone numbers to call & text anyone. Try it free! Your personal caller ID is hidden and not connected in any way, just like with all of our plans.
We now offer unlimited plans for $9.99 after a free three day trial. You can get a new number or upgrade your existing prepaid numbers. If you'd like to upgrade an existing subscription plan, please contact Support and we'd be happy to help you out.
Of course, you can always stick with our pay-as-you-go plans depending on what you need from your second number. They aren't going anywhere, we promise!
Important note: This update will require you to log in again. Please use the same email address that you setup your account with (or later added/updated in settings) so that we can log you in to the same account with all of your Unlisted numbers and data. If you have trouble finding the correct email address, please contact us at support@unlistedapp.com and we'd be happy to help out. Your best bet is to look for an email from getkeepsafe.com.
This update has a ton of huge updates under the hood, including optimizations to make the app quicker and snappier overall, but we wanted to call out one more huge update: our new VoIP calling system. We've re-implemented it from the ground up and you will see that not only are calls quicker to connect, but also more reliable and with better audio quality.
We think you're going to be really happy with the new Unlisted!
If you ever have any questions or think we can help with something, please send us an email at support@unlistedapp.com. If it is a question about your account, the best way is to contact us from inside the app (in the side menu), so that we can see your account information. Thank you!
4.0.0
2019-10-31
Looking for unlimited texting and calling with an Unlisted number? Try out our new unlimited plans for free! You can try them out with a new number, or upgrade your existing prepaid numbers. If you'd like to upgrade an existing subscription plan, please contact support and we'd be happy to help you out.
Of course, you can always stick with our pay-as-you-go plans depending on what you need your second number for. They aren't going anywhere, we promise!
Important note: This update will require you to log in again. Please use the same email address that you setup your account with (or later added/updated in settings) so that we can log you in to the same account with all of your Unlisted numbers and data. If you have trouble finding the correct email address, please contact us at support@unlistedapp.com and we'd be happy to help out. Your best bet is to look for an email from getkeepsafe.com.
This update has a ton of huge updates under the hood, including optimizations to make the app quicker and snappier overall, but we wanted to call out one more huge update: our new VoIP calling system. We've re-implemented it from the ground up and you will see that not only are calls quicker to connect, but also more reliable and with better audio quality.
We think you're going to be really happy with the new Unlisted!
If you ever have any questions or think we can help with something, please send us an email at support@unlistedapp.com. If it is a question about your account, the best way is to contact us from inside the app (in the side menu), so that we can see your account information. Thank you!
3.26.1
2019-10-03
This version has a few small but useful fixes:
* It is a bit easier to find and recover expired numbers
* If you are recovering a prepaid number, you can now choose a 1 month option
* Blocking a number now lets you know how to unblock it (go to the settings menu and remove it from Blocked Numbers)
* Contacts with custom number labels would not appear in the number picker. Now they do!
* A few other small tune ups to make common tasks more efficient under the hood
* The support email address has now changed to support@unlistedapp.com. Say hi anytime :)
3.26.0
2019-10-01
This version has a few small but useful fixes:
* It is a bit easier to find and recover expired numbers
* If you are recovering a prepaid number, you can now choose a 1 month option
* Blocking a number now lets you know how to unblock it (go to the settings menu and remove it from Blocked Numbers)
* Contacts with custom number labels would not appear in the number picker. Now they do!
* A few other small tune ups to make common tasks more efficient under the hood
* The support email address has now changed to support@unlistedapp.com. Say hi anytime :)
3.25.0
2019-09-29
This version has a few small but useful fixes:
* It is a bit easier to find and recover expired numbers
* If you are recovering a prepaid number, you can now choose a 1 month option
* Blocking a number now lets you know how to unblock it (go to the settings menu and remove it from Blocked Numbers)
* Contacts with custom number labels would not appear in the number picker. Now they do!
* A few other small tune ups to make common tasks more efficient under the hood
* The support email address has now changed to support@unlistedapp.com. Say hi anytime :)
3.24.0
2019-08-20
This version fixes a few things under the hood, as well as a problem that prevented some users from switching away from their forwarding number. Please contact us via the in-app side menu if you encounter any issues or if we can ever help with anything!
3.23.1
2019-06-17
This small update fixes a few crashes that were happening for users with PIN enabled.
Last week was also a big update with the two most requested features: blocking other numbers & restoring your previous numbers!
= You can now block a number by swiping on any conversation or call and choosing "Block". You can view blocked numbers (and unblock them) from Settings.
= If you accidentally delete or let a number expire, you can now go to the Settings (on the side menu) and restore it from there. We only have access to your number for a few days after it is deactivated, so please act quickly if you need it back.
On top of that, we've added a ton of little things throughout the app:
= iPhone 7s and later have haptic feedback (very small vibrations) in response to various actions. You can disable this in your iOS settings if you want, but we think you'll like it!
= Did you ever notice the round "New Message" button floating around on its own? That wasn't supposed to happen and now it's fixed.
= Prepaid plans now display their expiration date in the number options (tap the button on the top right to get there)
= It was a little too easy to delete an entire message conversation. We've added a confirmation to make sure you don't accidentally delete anything you didn't mean to.
= There were some small things "under the hood" that have been fixed to stop some occasional crashes & improve performance
That's it! We hope you find the new changes helpful and always welcome your feedback. Please get in touch with any questions, comments, or ideas. We're always reachable at unlisted-support@getkeepsafe.com.
3.23.0
2019-06-10
This small update fixes a few crashes that were happening for users with PIN enabled.
Last week was also a big update with the two most requested features: blocking other numbers & restoring your previous numbers!
= You can now block a number by swiping on any conversation or call and choosing "Block". You can view blocked numbers (and unblock them) from Settings.
= If you accidentally delete or let a number expire, you can now go to the Settings (on the side menu) and restore it from there. We only have access to your number for a few days after it is deactivated, so please act quickly if you need it back.
On top of that, we've added a ton of little things throughout the app:
= iPhone 7s and later have haptic feedback (very small vibrations) in response to various actions. You can disable this in your iOS settings if you want, but we think you'll like it!
= Did you ever notice the round "New Message" button floating around on its own? That wasn't supposed to happen and now it's fixed.
= Prepaid plans now display their expiration date in the number options (tap the button on the top right to get there)
= It was a little too easy to delete an entire message conversation. We've added a confirmation to make sure you don't accidentally delete anything you didn't mean to.
= There were some small things "under the hood" that have been fixed to stop some occasional crashes & improve performance
That's it! We hope you find the new changes helpful and always welcome your feedback. Please get in touch with any questions, comments, or ideas. We're always reachable at unlisted-support@getkeepsafe.com.
3.22.0
2019-06-02
This is a big update. First up are the two most requested features: blocking other numbers & restoring your previous numbers!
* You can now block a number by swiping on any conversation or call and choosing "Block". You can view blocked numbers (and unblock them) from Settings.
* If you accidentally delete or let a number expire, you can now go to the Settings (on the side menu) and restore it from there. We only have access to your number for a few days after it is deactivated, so please act quickly if you need it back.
On top of that, we've added a ton of little things throughout the app:
* iPhone 7s and later have haptic feedback (very small vibrations) in response to various actions. You can disable this in your iOS settings if you want, but we think you'll like it!
* Did you ever notice the round "New Message" button floating around on its own? That wasn't supposed to happen and now it's fixed.
* Prepaid plans now display their expiration date in the number options (tap the button on the top right to get there)
* It was a little too easy to delete an entire message conversation. We've added a confirmation to make sure you don't accidentally delete anything you didn't mean to.
* There were some small things "under the hood" that have been fixed to stop some occasional crashes & improve performance
That's it! We hope you find the new changes helpful and always welcome your feedback. Please get in touch with any questions, comments, or ideas. We're always reachable at unlisted-support@getkeepsafe.com.
3.21.0
2019-06-01
This is a big update. First up are the two most requested features: blocking other numbers & restoring your previous numbers!
* You can now block a number by swiping on any conversation or call and choosing "Block". You can view blocked numbers (and unblock them) from Settings.
* If you accidentally delete or let a number expire, you can now go to the Settings (on the side menu) and restore it from there. We only have access to your number for a few days after it is deactivated, so please act quickly if you need it back.
On top of that, we've added a ton of little things throughout the app:
* iPhone 7s and later have haptic feedback (very small vibrations) in response to various actions. You can disable this in your iOS settings if you want, but we think you'll like it!
* Did you ever notice the round "New Message" button floating around on its own? That wasn't supposed to happen and now it's fixed.
* Prepaid plans now display their expiration date in the number options (tap the button on the top right to get there)
* It was a little too easy to delete an entire message conversation. We've added a confirmation to make sure you don't accidentally delete anything you didn't mean to.
* There were some small things "under the hood" that have been fixed to stop some occasional crashes & improve performance
That's it! We hope you find the new changes helpful and always welcome your feedback. Please get in touch with any questions, comments, or ideas. We're always reachable at unlisted-support@getkeepsafe.com.
3.20.0
2019-04-28
* Some messages and voicemails weren't being properly marked as read. This is fixed now so those pesky red dots won't keep re-appearing.
* As part of our constant maintenance, we fixed some crashes here and there.
If you have any questions or need help using Unlisted, please get in touch anytime: unlisted-support@getkeepsafe.com
3.19.0
2019-04-21
Recording your voicemail greeting is much easier and is now done through the app! You can also toggle between the default and custom greeting, with playback so that you can double check it.
3.18.0
2019-03-29
Recording your voicemail greeting is much easier and is now done through the app! You can also toggle between the default and custom greeting, with playback so that you can double check it.
3.16.1
2019-02-28
Recording your voicemail greeting is much easier and is now done through the app! You can also toggle between the default and custom greeting, with playback so that you can double check it.
3.16.0
2019-02-25
Recording your voicemail greeting is much easier and is now done through the app! You can also toggle between the default and custom greeting, with playback so that you can double check it.
3.15.0
2019-02-01
In this version of Unlisted:
New Pro Feature - long press on the message or voicemail tab to mark all as read.
We also fixed a bug in the settings menu that was showing multiple headers. Cheers!
3.14.0
2018-12-12
Save images from Unlisted to Keepsafe Photo Vault! Photos saved from Unlisted will show up in Keepsafe Photo Vault within an album called "Unlisted".
Smaller releases:
- You are now able to tap on links from within text message threads.
- It is now more apparent that you can start a new text thread by inputing a number into the search field when in the contacts page.
3.13.0
2018-12-04
Save images from Unlisted to Keepsafe Photo Vault! Photos saved from Unlisted will show up in Keepsafe Photo Vault within an album called "Unlisted".
Smaller releases:
- You are now able to tap on links from within text message threads.
- It is now more apparent that you can start a new text thread by inputing a number into the search field when in the contacts page.
3.12.0
2018-11-15
- New call notifications an interface are no live.
- Links that are sent or received over SMS will now be tappable.
Having issues? Please let us know at support@getkeepsafe.com
3.11.1
2018-11-07
Protect your Unlisted conversations with a PIN!
By default the PIN is turned off, so you will need to turn it on in the settings menu. Once on it will require the PIN every time you open the app.
Having issues? Please let us know at support@getkeepsafe.com
3.11.0
2018-11-05
Protect your Unlisted conversations with a PIN!
By default the PIN is turned off, so you will need to turn it on in the settings menu. Once on it will require the PIN every time you open the app.
Having issues? Please let us know at support@getkeepsafe.com
3.10.0
2018-10-18
New Feature: Private Contacts
Keep your Unlisted and iPhone contact lists separated with Unlisted Private Contacts.
Contacts added to Unlisted will stay in Unlisted and will never touch your iPhone's Contact Book.
Easily toggle through both your Unlisted Private Contacts and your regular Contact Book when selecting messages.
Access your Unlisted Private Contacts anytime, even if you don't have a registered number!
3.9.0
2018-10-05
Bug fixes and performance improvements.
3.8.0
2018-09-08
Bug fixes and performance improvements.
3.7.1
2018-08-23
We have new features in this update that we're excited to share with you!
Two new number options, both accessible from number's Options tab:
- Add a color to a number and it will appear throughout the app. This helps you determine which number you are using when dialing & texting.
- You can set notification settings per number. The options are Normal, Private, and None. This gives you full control over what the notification shows, in case you want to keep certain conversations private.
Another awesome feature being added is the ability to copy and paste images into chat!
3.7.0
2018-08-22
Bug fixes and performance improvements.
3.6.0
2018-08-09
Bug fixes and performance improvements.
3.5.0
2018-07-26
Bug fixes and performance improvements.
3.4.0
2018-07-12
Bug fixes and performance improvements.
3.3.0
2018-06-27
Bug fixes and performance improvements.
3.2.0
2018-06-13
Bug fixes and performance improvements.
3.1.0
2018-06-06
Bug fixes and performance improvements.
3.0.0
2018-05-16
We've renamed LineUp. It's now Keepsafe Unlisted!
Keepsafe Unlisted is the newest addition to Keepsafe's family of simple privacy apps. With Keepsafe Photo Vault and Keepsafe VPN, we're giving people more ways to protect their personal space.
Never fear - All LineUp phone numbers and plans work as expected. Here are the three biggest changes in this release:
- Completely new app design
- iPhone X support
- Optional monthly subscriptions for each number
Please send feedback and questions to support@getkeepsafe.com!
2.10.0
2018-05-03
Bug fixes and performance improvements.
2.9.0
2018-04-24
Bug fixes and performance improvements.
