Viper SmartStart

5.4.1 for iPhone
Free
9.0

3k+ Ratings

Update Date

2022-12-20

Size

217.1 MB

Screenshots for iPhone

iPhone
Viper SmartStart Description
Start, locate and control your car from virtually anywhere with your iPhone or Apple watch!

"Making the cloud-connected car a reality"
- Edmunds.com

"Without a doubt, one of the coolest apps I've ever seen"
- GIZMODO

With the release of its all-new 5th generation Viper SmartStart app, connecting with and controlling your vehicle is easier than ever – including real time status via the updated dashboards, and control via your Apple watch!

- Add a Viper SmartStart GPS module to the Viper remote start or security system in your car so you can start, lock and unlock your car from virtually anywhere. You can also locate your car, share its location with your friends or family, and get safety notifications if your Viper SmartStart-protected car is speeding or goes where it's not supposed to go.

- For the ultimate connected car experience, install a complete Viper SmartStart Digital System and you’ll also get engine runtime and real time status on your choice of app dashboard. Get notified if your vehicle sets a diagnostic code, or check your fuel, battery, or odometer right in the app!

- All 4G LTE GPS modules come with a free 30-day GPS trial so you can check out the cool features right away, and there’s even an option for a year of free Basic service. Step up to Secure service to get 2-way control confirmations or add GPS or Small Fleet & Family for the ultimate in car control and monitoring along with extended warranty and theft protection.

The sleek, modern dashboards of Viper SmartStart 5.3 mobile app give you fingertip control over the following features of your installed Viper remote start or security/remote start system:
- Lock/arm
- Unlock/disarm
- Remote car starter
- Trunk release
- Panic
- Aux channels

Follow these three simple steps to get Viper SmartStart:
1) Download the free Viper SmartStart app
2) Get a SmartStart system installed in your vehicle
3) Set up your account, and start using your SmartStart system

Viper SmartStart also includes Viper Motor Club, providing convenient 24/7 access to our nationwide roadside assistance network. Just press a button in the app to get connected for towing due to breakdown or accidents, or assistance with a dead battery or flat tire. Member roadside assistance is free with Secure or higher level service plans and pre-registration. Even if you don’t sign up, you can use the guest program for the same great service at a fixed cost.

Latest features:

- Real time status on your favorite dashboard! Check the remote start runtime or whether your doors are locked and more instantly just by opening the app! (digital systems only)

- Monitor the battery, odometer, and fuel level in the extended Status page (requires a digital system, some features may not be supported on all vehicles)

- Convenient widget for one-touch command execution without needing to open the app first

- Start, lock, unlock or locate your car using your Apple watch, or send other commands

- Receive alert notifications on your phone and Apple watch

- Four user-selectable dashboards and launch page settings – now you can customize the app for the way you use it

- Modern dashboard "swipe up to start" feature eliminates accidental remote start commands

- Map page integrates GPS and SmartPark features seamlessly – locate your vehicle, or track down where you parked

- Manage notifications: Each user can select how they want to receive alerts or other notifications. Choose from push alerts with custom sound effects, email, or SMS (SMS alerts may not be available outside North America)
Viper SmartStart 5.4.1 Update
2022-12-20
Minor enhancements and bugs fixes
More Information
Price:
Free
Version:
5.4.1
Size:
217.1 MB
Update Date:
2022-12-20
Developer:
Directed
Language:
English French Spanish

Safe to Download

AppPure.com and the download link of this app are 100% safe. The download link of this app will be redirected to the official App Store site, thus the app is original and has not been modified in any way.

Got it
X
Share

Share this page with your friends if you find it useful

Facebook Linkedin Pinterest Tumblr Twitter Whatsapp Line
5.4.1 2022-12-20
Minor enhancements and bugs fixes
5.4.0 2022-05-19
App now supports three languages, English, Spanish and French
Now supports EV battery level (digital systems only)
Biometric support for passcode
5.3.8 2022-02-02
- Fixed passcode issue and other improvements.
5.3.7 2021-12-24
Fixed login issues and other improvements.
5.3.5 2021-07-27
- Bug fixes and improvements
5.3.3 2020-10-16
5.3.3 New Feature:
- Remote Start Runtime Reset

5.3 New Features:
- Battery Voltage
- Fuel Level
- Odometer

The Real Time Status bar provides instant feedback on:
- Remote start runtime
- Vehicle locked/unlocked
- Door, trunk, and hood open/close status
- Alert and panic notification

*New features require the Viper SmartStart 5.3.3 App, a SmartStart Pro with a DS4 or another digital system, or a Connect device with a DS4

Note: Some features are vehicle dependent and may not be supported
5.3.1 2020-05-26
5.3.1 Bug Fix:
- Legacy Bluetooth device commands crashed app

5.3 New Features:
- Battery Voltage
- Fuel Level
- Odometer

Real Time Status bar provides instant feedback for:
- Remote start runtime
- Vehicle lock status
- Door, trunk, hood open/close status
- Panic status

*New features require Viper SmartStart 5.3.1 app, SmartStart Pro with DS4 or another digital system, or Connect device with DS4

Note: Some features are vehicle dependent and may not be supported
5.3.0 2020-03-04
New Features:
- Battery Voltage
- Fuel Level
- Odometer
- Real Time Status


The Real Time Status bar at the bottom of the app will provide you instant feedback to see things like:
- Remote start runtime countdown
- Vehicle locked/unlocked state
- Door, trunk, and hood open/close status
- Alert and panic notification
- Real Time Status push notifications

*** New features and Real Time Status require the SmartStart 5.3 App, a SmartStart Pro with a DS4 or another digital system, or a Connect device with a DS4 system ***

Note: New features are vehicle dependent and some features may not be supported
5.2.3 2019-12-19
Miscellaneous improvements and bug fixes
5.2.2 2019-10-28
Enhanced support for iOS 13
Bug fixes
5.2.1 2019-10-07
Enhanced support for iOS 13
Added support for new SmartStart service plans
Bug fixes
5.2 2019-09-26
Bug Fixes & Improvements
5.1 2019-07-24
Adds support for new VCM550 and DCM550 hardware
Miscellaneous improvements and bug fixes
5.0 2018-09-14
Added support for Viper SmartStart Pro devices
4.4 2018-06-06
- Support for Viper Powersports GPS systems
- iPhone X compatibility
- Bug fixes
4.3.4 2017-11-30
- Improved SmartFence and Speed Alert Scheduling feature
- Widget improvements
- Support for 48 hour grace period
- Various bug fixes
4.3.3 2017-09-07
•Improved Activity page functionality
•Various bug fixes
4.3.2 2017-05-16
-Fixed a crash that some GPS users experienced when updating from a previous version
4.3.1 2017-05-13
Addition of new widget
Addition of two new dashboards
Various bug fixes
4.3 2017-03-17
-Added compatibility for new DS4/DS4+ systems
-Minor bug fixes
4.2.2 2016-12-08
Various bug fixes
4.2.1 2016-11-11
- Added remote start runtime counter (digital systems only)
- Added signal strength indicator (all systems)
- Bug fixes
4.2 2016-09-21
- Enhanced remote start feedback: Ever started your car from your smartphone, but weren’t sure afterwards if the car was actually running? No problem with v4.2, the app confirms the command and then follows it up a few moments later to let you know if the engine is running, or stopped (digital systems only). The details are provided right on the dashboard too, no need to check the status page.

- Enhanced command feedback: Now when you send a command to your SmartStart system, the app provides the details for the command right on the dashboard and keeps them there in case you forget and want to check back later to confirm what happened. Doors locked at 8:30AM? Check! (all systems)

- Last command sent: Tired of having to refresh the Status page and wait for it to update just so you could check on whether you remembered to lock the doors? Now you can simply open the Status page and your last command sent is displayed at the top.

- New Help page: Allows SmartStart users to troubleshoot issues, leave us feedback, or connect directly with our support team through the app.

- Other bug & crash fixes: Good news! We’ve found and fixed the bug that was causing the app to occasionally log users out when they relaunched the app.
4.1 2016-03-16
enhancements to Map page, fixed password rule issue for Register feature, Status refresh icon, misc. bug fixes
4.0.5 2015-12-22
miscellaneous bug and crash fixes
4.0.1 2015-09-16
New for Viper SmartStart 4.0

- Completely redesigned app with streamlined, easy access to key features and information.
- The controls you use most often are right at your fingertips, and other useful features are just a tap or swipe away.
- New swipe to start feature eliminates accidental remote start commands (modern dashboard).
- User-selectable dashboard and home page settings – now you can customize the app for the way you use it.
- Map page now integrates GPS and SmartPark features seamlessly, and provides quick access for programming location or movement alerts.
- Forget how long it’s been since you parked your car at that meter? No problem, tap the Map icon and it’ll let you know when you last locked your car.
- One-touch vehicle selection menu with integrated vehicle status page; pick your vehicle and get status updates at the same time.
- One-touch access to Alert history and new alert programming.
- Built-in tutorial videos, help overlay on key pages, and guided on-boarding process make getting to know SmartStart 4.0 easier than ever.
- Set up your own SmartStart account right from the app including picking your own personalized password (now required for users that have Bluetooth-only Viper SmartKey or VSM50BT systems; optional for new SmartStart cellular system owners).
- In-app management of your SmartStart vehicles and their associated service plans.
- Start, lock or unlock your car using your Apple Watch, or send other commands.
- Check your vehicle location from Apple Watch, with one-touch link to Apple Maps for getting directions or sharing the location.
- Receive alert notifications on your Apple Watch if vehicle alarm is triggered, or a SmartStart GPS alert is received.
- Swipe from SmartSchedule reminder (on iPhone or Apple Watch) directly to app to start your vehicle.

Known issues:

- No backup cell commands if Bluetooth link fails; must turn off Bluetooth Control and re-send command
- Map view selection and other map features coming soon
- Time, temp and location displayed for non-GPS systems (reflects details handset location instead of using vehicle location)
- Owners of Bluetooth-only (Viper SmartKey or VSM50BT systems with no cellular SmartStart device) must create an account after installing the app in order to access the dashboard controls and other features
- Images currently associated with your vehicles will have to be re-linked to them in the app after installing Viper SmartStart 4.0
3.2.1 2014-09-30
- iOS8 optimization.
- Bug Fixes
3.2 2014-04-07
- Supports SmartKey (must have hardware)
- "Add a car" redesign of Cars page for adding bluetooth devices.
- Can have bluetooth devices as standalone on an active cars list.
- New iOS7 graphics UI redesign.
- Bug Fixes
3.1.5 2013-08-30
-This upgrade supports Bluetooth passive keyless entry. Requires special beta hardware.
3.1.1 2013-01-08
- Streamlined service plan purchase and account management via the app
- Streamlined launch page navigation - new launch page gives new users a direct path to either log in for the first time, or to the free features portion of the app. Built-in popups also link to the Service Plan/Account Manager tool.
- iPhone 5 Updates
- 3.1 bug fixes
3.1 2012-12-19
- Streamlined service plan purchase and account management via the app
- Streamlined launch page navigation - new launch page gives new users a direct path to either log in for the first time, or to the free features portion of the app. Built-in popups also link to the Service Plan/Account Manager tool.
- iPhone 5 Updates
- 3.0.1 bug fixes
3.0.1 2012-10-18
- Added ability to launch the app and auto-execute a remote start or lock/unlock command, using Siri (older handsets can do same by tapping the launch icon)
- Added ability for user to program their text message alerts, including turning them on/off
- Added ability for user to program email alerts
- Added support for Maps (restored function for SmartPark and GPS sections)
- General iOS 6 support
- 3.0 bug fixes including SmartSchedule set time error and Bluetooth pop-up errors after command sent
3.0 2012-05-31
— SmartSchedule - Part weatherman, part mind-reader. Get alerts to start your car when pre-programmed conditions are met.
— Vehicle Status - Know your vehicle is running, armed, locked and more.
— Auxiliary Channels - Customize your SmartStart experience.
— Power user mode - Get to the home screen and send commands faster than ever, so you can get on with your busy day.
— Vehicle Diagnostics - Know the health of your car from the cloud. Diagnostic Trouble Codes, right on your smartphone.
— Bluetooth compatibility – one app that controls both Viper SmartStart modules seamlessly

* Some 3.0 features are system-dependent. Go to www.viper.com/smartstart for more information.
2.3 2011-12-20
— New Viper look and feel graphic interface
— New elegant user interface highlights all the new and exclusive features in SmartStart
— Choose between a new pink UI or rock the old school Viper Responder look with new user-selectable custom skins
— Updated Viper Motor Club – automatically retrieves subscribed member information
— Completely revised SmartPark section with improved accuracy and interactive map UI
— Updated Parking Meter graphics
2.2.2 2011-08-06
- Bug Fixes
2.2.1 2011-06-21
- Adds new selector to turn off motion switch for home control
- Bug fixes
2.2 2011-04-11
- New Viper SmartStartGPS Features
- Locate your vehicle
- Share location via social networking
- Protect your vehicle and family
- Set alert notifications if your car is speeding or goes where it's not supposed to go
- New Home Control Feature allows you to arm/disarm compatible alarm systems and check home alarm status from your iPhone
- Retina display support
- Enhanced user interface & feedback
- Built-in Help pages