DomintellRemote
$99.99
2.4for iPhone, iPad
Age Rating
DomintellRemote Screenshots
About DomintellRemote
Domintell Remote gives you your whole house at your finger tips.
Please check the support site for additional information, follow @domintellremote on Twitter and don't hesitate to provide feedback at dr_support@iphone-remotes.com
Domintell Remote gives you the power to control your Domintell installation from your iPhone, iPod touch or iPad.
Its flexible user interface allows you to organize your control as you see fit. Trigger sfers, raise and lower lights or blinds, group per rooms, person or scenario, the decision is up to you.
Requirements:
Domintell Remote requires a DETH02 module. It has been tested with v1.19.18 of the software as well as several v1.2x versions.
Domintell Remote controls the Domintell system through its IP interface. The DETH02 module must be connected to your LAN and the iPhone / iPod touch / iPad must be able to access it.
Supported modules include : DDIM01, DOUT10V02, DBIR01, DMR01, DTRP01, DTRV01, DTRVBT01, DTRP02, DTEM01, DTEM02, DTSC0x, DTSC35, DLCD03, DPBTLCD0x, DPBT0x, DISM0x, DLED01, DAMPLI01, DFAN01, DDMX01
Please check the support site for additional information, follow @domintellremote on Twitter and don't hesitate to provide feedback at dr_support@iphone-remotes.com
Domintell Remote gives you the power to control your Domintell installation from your iPhone, iPod touch or iPad.
Its flexible user interface allows you to organize your control as you see fit. Trigger sfers, raise and lower lights or blinds, group per rooms, person or scenario, the decision is up to you.
Requirements:
Domintell Remote requires a DETH02 module. It has been tested with v1.19.18 of the software as well as several v1.2x versions.
Domintell Remote controls the Domintell system through its IP interface. The DETH02 module must be connected to your LAN and the iPhone / iPod touch / iPad must be able to access it.
Supported modules include : DDIM01, DOUT10V02, DBIR01, DMR01, DTRP01, DTRV01, DTRVBT01, DTRP02, DTEM01, DTEM02, DTSC0x, DTSC35, DLCD03, DPBTLCD0x, DPBT0x, DISM0x, DLED01, DAMPLI01, DFAN01, DDMX01
Show More
What's New in the Latest Version 2.4
Last updated on Jun 14, 2016
Old Versions
This is mainly a maintenance version.
In addition to some internal clean-up, we added additional logging and basic analytics in order to improve the app stability and better focus our efforts for future releases.
In addition to some internal clean-up, we added additional logging and basic analytics in order to improve the app stability and better focus our efforts for future releases.
Show More
Version History
2.4
Jun 14, 2016
This is mainly a maintenance version.
In addition to some internal clean-up, we added additional logging and basic analytics in order to improve the app stability and better focus our efforts for future releases.
In addition to some internal clean-up, we added additional logging and basic analytics in order to improve the app stability and better focus our efforts for future releases.
2.3
Apr 5, 2016
- Improved UI, now fully adapted to all screens sizes
- Fixed application freeze in system refresh after DETH02 discovery
- Improved communications with DETH02
- Miscellaneous UI tweaks and bug fixes
- Fixed application freeze in system refresh after DETH02 discovery
- Improved communications with DETH02
- Miscellaneous UI tweaks and bug fixes
2.2
Dec 14, 2015
Bug fixes and improvements when using newer iOS versions
Improvements to communication with DETH02
Help information when adding a UI element to the design and grey out elements that do not make sense in that context
Progress indicator when exporting configuration
Presence simulation switch in Popover on iPhone too
Improvements to communication with DETH02
Help information when adding a UI element to the design and grey out elements that do not make sense in that context
Progress indicator when exporting configuration
Presence simulation switch in Popover on iPhone too
2.1
Nov 12, 2014
- Now supporting Domintell Master version 1.2x. In that case, the temperature widget allows to control both the cooling and the heating points. The color wheel automatically detects the DMX channels used for RGB.
- Export/import feature allows you to copy a configuration from one device to another using peer-to-peer communication or via e-mail. This can also be used to archive your configurations.
- A setup wizard automatically guides you when first using the application and detects any DETH02 present on your local network.
- Fully compatible (but not optimized yet, this is coming soon) for iOS 7 and 8.
- Most widgets can now display status and control variables.
- Control of presence simulation (boat icon).
- The pulsating color in the navigation bar to indicate connection status has been replaced with an icon in the toolbar.
- Fixed behavior of TRP module control.
- Several others improvements on UI behavior and communication robustness.
- Export/import feature allows you to copy a configuration from one device to another using peer-to-peer communication or via e-mail. This can also be used to archive your configurations.
- A setup wizard automatically guides you when first using the application and detects any DETH02 present on your local network.
- Fully compatible (but not optimized yet, this is coming soon) for iOS 7 and 8.
- Most widgets can now display status and control variables.
- Control of presence simulation (boat icon).
- The pulsating color in the navigation bar to indicate connection status has been replaced with an icon in the toolbar.
- Fixed behavior of TRP module control.
- Several others improvements on UI behavior and communication robustness.
2.0.5
Feb 4, 2014
- When adding a group, allows to take a picture in addition to picking from the library (if device allows it)
- Search criteria for adding an element is remembered
- When creating a default GUI, don't create a top level "House" group
- Refresh configuration button only enabled when DETH02 connection information is valid
- Warning if DETH02 version is older than 9 (you should update your DETH02 if this is the case)
- Search criteria for adding an element is remembered
- When creating a default GUI, don't create a top level "House" group
- Refresh configuration button only enabled when DETH02 connection information is valid
- Warning if DETH02 version is older than 9 (you should update your DETH02 if this is the case)
2.0.2
Jan 24, 2014
Fixes crash in configuration refresh on iOS 7
2.0.1
Jun 18, 2013
Bug fix:
- button feedback not working properly
- button feedback not working properly
2.0
May 23, 2013
- Added support for DAMPLI01 module, including pre-defined stations list
- Added support for DFAN01 module
- Added support for DDMX01 module and specific color wheel UI element for easy color selection
- Improved control for shutters, with individual up/down control and long press to open/close
- Support iPhone 5 display (full height)
- Create GUI creates default UI elements for Shutters, AMPs and FANs
- Elements created by the "Create GUI" feature are now alphabetically ordered
- Support for local and remote connection information (address and port number), making usage of Domintell Remote from internet much more convenient
- Support for multiple configurations
- Better demo configuration, including all supported elements
- Overall review of the UI for improved ease of use and consistency
- Numerous bug fixes and stability improvements, mainly in communication with master
- Added support for DFAN01 module
- Added support for DDMX01 module and specific color wheel UI element for easy color selection
- Improved control for shutters, with individual up/down control and long press to open/close
- Support iPhone 5 display (full height)
- Create GUI creates default UI elements for Shutters, AMPs and FANs
- Elements created by the "Create GUI" feature are now alphabetically ordered
- Support for local and remote connection information (address and port number), making usage of Domintell Remote from internet much more convenient
- Support for multiple configurations
- Better demo configuration, including all supported elements
- Overall review of the UI for improved ease of use and consistency
- Numerous bug fixes and stability improvements, mainly in communication with master
1.41
May 24, 2012
Added support for temperature sensor in DTSC02, DTSC04, DTSC35 screens
1.40
Feb 22, 2012
- Support for Domintell firmware 1.19.17 and above
- Added automatic UI creation based on system configuration
- Fixed issues with changes in location information not detected on configuration refresh
- New refresh configuration panel, indicating detected master version
- Improved a bit the UI, new icons
- Added automatic UI creation based on system configuration
- Fixed issues with changes in location information not detected on configuration refresh
- New refresh configuration panel, indicating detected master version
- Improved a bit the UI, new icons
1.30
Mar 1, 2011
- Bug fix : some modules were missing from selection list
- Bug fix : PBL temperature sensor not working (Important: Domintell software version 1.19.11 is required for this to work correctly)
- Better indication that connection is underway (navigation bar now pulses to indicate that)
- Improved error messages in case of connection failures
- Improved communication code
- Bug fix : PBL temperature sensor not working (Important: Domintell software version 1.19.11 is required for this to work correctly)
- Better indication that connection is underway (navigation bar now pulses to indicate that)
- Improved error messages in case of connection failures
- Improved communication code
1.20
Dec 23, 2010
- Added support for LED, ISM and keypad modules
- Connection status is now displayed in the navigation bar
- Added full-text search in list when selecting module
- Reviewed Settings page
- Improved behavior of temperature module when global temperature mode is not set to automatic
Bug fixes:
- no more crash when no password set in DETH02 but one set in DomintellRemote
- several UI glitches have been fixed
- fixed typo in e-mail on Info page
- Connection status is now displayed in the navigation bar
- Added full-text search in list when selecting module
- Reviewed Settings page
- Improved behavior of temperature module when global temperature mode is not set to automatic
Bug fixes:
- no more crash when no password set in DETH02 but one set in DomintellRemote
- several UI glitches have been fixed
- fixed typo in e-mail on Info page
1.1
Aug 6, 2010
Universal application with full support for the iPad
Added control of temperature
Connection is now possible over 3G/EDGE
After the upgrade, in order for the new module types to be recognized, please go to the Settings page and tap on "Refresh system configuration".
Added control of temperature
Connection is now possible over 3G/EDGE
After the upgrade, in order for the new module types to be recognized, please go to the Settings page and tap on "Refresh system configuration".
1.02
Jun 18, 2010
Added support for
- password authentication
- hostnames in addition to IP addresses
- DTRV01, DTRVBT01, DTRP02 modules
Some improvements to the UI
Improved networking code
Miscellaneous bug fixes
- password authentication
- hostnames in addition to IP addresses
- DTRV01, DTRVBT01, DTRP02 modules
Some improvements to the UI
Improved networking code
Miscellaneous bug fixes
1.0
May 15, 2010
DomintellRemote FAQ
Click here to learn how to download DomintellRemote in restricted country or region.
Check the following list to see the minimum requirements of DomintellRemote.
iPhone
iPad
DomintellRemote supports English, French
