xControl
$9.99
1.5.6for iPhone, iPad
Age Rating
xControl Screenshots
About xControl
Easily control your Insteon devices. List all of your Insteon devices and hit on/off button or use slider to adjust accordingly.
Some Feature Highlights:
- Control Lighting
- Control Scenes
- Enable/Disable, run programs
- Check Sensors
- Local and Remote control (including ISY Portal)
Scroll through your devices quickly and easily without having to navigate lots of menus.
Swipe between favorites, lights, scenes and sensors easily without having to open menus.
Currently requires an ISY controller and you need the ip/dns and port number or login via the ISY Portal.
Works across all platforms for a consistent UI look and feel.
Create a favorites tab or control all lights and scenes quickly and easily.
Version 1.5.6
-----------
Added some more help messages when favorites are blank.
Fixed some minor bugs.
Version 1.5.5
-----------
Fixed sensor switch to turn on when the sensor is actually on not just display the message "on"
Improved status updates.
Fixed sliders so they don't jump while sliding and updating.
Made some performance enhancements.
When adding a device they are now alphabetically sorted.
Version 1.5.4
-----------
Changed the slider handle to be silver and bigger for better control.
Version 1.5.3
-----------
Performance Improvements
Switches now show the message associated with them and not the dimmer. i.e. locked, on, off, etc
Added a yellow border for on to make them look more distinguished.
Fixed an issue with the data load from ISY where some of the devices weren't going into the correct categories.
Added an options menu with the option to disable the view scrolling feature.
Flash a yellow border around the scene buttons when pressed on/off
Version 1.5.2
-----------
Other UI elements now refresh after scenes are turned on/off or programs are run.
Programs in right menu now shows all folders and the programs underneath them even if they're nested folders(it does flatten the structure).
Version 1.5.1
-----------
Added a sensor view
Added devices that are sensors to the sensor view when querying an ISY
Dimmers, switches and sensors have their own templates
Fixed issue when existing folders could not be removed after being added (Might require a remove of the app and re-install)
Moved programs onto the right menu and made them generic for more of a setup look
Added runThen and runElse buttons for programs.
Programs can now be added like any other device into any folder (run is assumed for now).
Fixed a few crashing issues when going between menus.
Some Feature Highlights:
- Control Lighting
- Control Scenes
- Enable/Disable, run programs
- Check Sensors
- Local and Remote control (including ISY Portal)
Scroll through your devices quickly and easily without having to navigate lots of menus.
Swipe between favorites, lights, scenes and sensors easily without having to open menus.
Currently requires an ISY controller and you need the ip/dns and port number or login via the ISY Portal.
Works across all platforms for a consistent UI look and feel.
Create a favorites tab or control all lights and scenes quickly and easily.
Version 1.5.6
-----------
Added some more help messages when favorites are blank.
Fixed some minor bugs.
Version 1.5.5
-----------
Fixed sensor switch to turn on when the sensor is actually on not just display the message "on"
Improved status updates.
Fixed sliders so they don't jump while sliding and updating.
Made some performance enhancements.
When adding a device they are now alphabetically sorted.
Version 1.5.4
-----------
Changed the slider handle to be silver and bigger for better control.
Version 1.5.3
-----------
Performance Improvements
Switches now show the message associated with them and not the dimmer. i.e. locked, on, off, etc
Added a yellow border for on to make them look more distinguished.
Fixed an issue with the data load from ISY where some of the devices weren't going into the correct categories.
Added an options menu with the option to disable the view scrolling feature.
Flash a yellow border around the scene buttons when pressed on/off
Version 1.5.2
-----------
Other UI elements now refresh after scenes are turned on/off or programs are run.
Programs in right menu now shows all folders and the programs underneath them even if they're nested folders(it does flatten the structure).
Version 1.5.1
-----------
Added a sensor view
Added devices that are sensors to the sensor view when querying an ISY
Dimmers, switches and sensors have their own templates
Fixed issue when existing folders could not be removed after being added (Might require a remove of the app and re-install)
Moved programs onto the right menu and made them generic for more of a setup look
Added runThen and runElse buttons for programs.
Programs can now be added like any other device into any folder (run is assumed for now).
Fixed a few crashing issues when going between menus.
Show More
What's New in the Latest Version 1.5.6
Last updated on Aug 9, 2016
Old Versions
Version 1.5.6
-----------
Performance Improvements
Switches now show the message associated with them and not the dimmer. i.e. locked, on, off, etc
Added a yellow border for on to make them look more distinguished.
Fixed an issue with the data load from ISY where some of the devices weren't going into the correct categories.
Added an options menu with the option to disable the view scrolling feature.
Flash a yellow border around the scene buttons when pressed on/off
Version 1.5.2
-----------
Other UI elements now refresh after scenes are turned on/off or programs are run.
Programs in right menu now shows all folders and the programs underneath them even if they're nested folders(it does flatten the structure).
Version 1.5.1
-----------
IMPORTANT: Please remove the app and re-install. There were some deeper changes that had to be made for some of the following fixes.
Added a sensor view
Added devices that are sensors to the sensor view when querying an ISY
Dimmers, switches and sensors have their own templates
Fixed issue when existing folders could not be removed after being added (Might require a remove of the app and re-install)
Moved programs onto the right menu and made them generic for more of a setup look
Added runThen and runElse buttons for programs.
Programs can now be added like any other device into any folder (run is assumed for now).
Fixed a few crashing issues when going between menus.
Version 1.5
-----------
- Scene buttons now give feedback when pressed.
- Switches for http/https and remote/local network
- Changed name of default folder
- ISY portal is the default remote connection
- Added About page with version
- Fixed issue where button tracking wasn't working for some ISY devices.
- Changed the add icon to green. Isn't it pretty?
- You can now add new folders or existing folders to a view.
- When adding devices you can now click on them to add/remove them from the same page.
- When clicking to add devices it will no longer add duplicates.
- Now when you choose a device you can rename it you don't have to go to edit mode.
- There is a new page for Programs that allows you to run them, disable them or see when they were last run.
-----------
Performance Improvements
Switches now show the message associated with them and not the dimmer. i.e. locked, on, off, etc
Added a yellow border for on to make them look more distinguished.
Fixed an issue with the data load from ISY where some of the devices weren't going into the correct categories.
Added an options menu with the option to disable the view scrolling feature.
Flash a yellow border around the scene buttons when pressed on/off
Version 1.5.2
-----------
Other UI elements now refresh after scenes are turned on/off or programs are run.
Programs in right menu now shows all folders and the programs underneath them even if they're nested folders(it does flatten the structure).
Version 1.5.1
-----------
IMPORTANT: Please remove the app and re-install. There were some deeper changes that had to be made for some of the following fixes.
Added a sensor view
Added devices that are sensors to the sensor view when querying an ISY
Dimmers, switches and sensors have their own templates
Fixed issue when existing folders could not be removed after being added (Might require a remove of the app and re-install)
Moved programs onto the right menu and made them generic for more of a setup look
Added runThen and runElse buttons for programs.
Programs can now be added like any other device into any folder (run is assumed for now).
Fixed a few crashing issues when going between menus.
Version 1.5
-----------
- Scene buttons now give feedback when pressed.
- Switches for http/https and remote/local network
- Changed name of default folder
- ISY portal is the default remote connection
- Added About page with version
- Fixed issue where button tracking wasn't working for some ISY devices.
- Changed the add icon to green. Isn't it pretty?
- You can now add new folders or existing folders to a view.
- When adding devices you can now click on them to add/remove them from the same page.
- When clicking to add devices it will no longer add duplicates.
- Now when you choose a device you can rename it you don't have to go to edit mode.
- There is a new page for Programs that allows you to run them, disable them or see when they were last run.
Show More
Version History
1.5.6
Aug 9, 2016
Version 1.5.6
-----------
Performance Improvements
Switches now show the message associated with them and not the dimmer. i.e. locked, on, off, etc
Added a yellow border for on to make them look more distinguished.
Fixed an issue with the data load from ISY where some of the devices weren't going into the correct categories.
Added an options menu with the option to disable the view scrolling feature.
Flash a yellow border around the scene buttons when pressed on/off
Version 1.5.2
-----------
Other UI elements now refresh after scenes are turned on/off or programs are run.
Programs in right menu now shows all folders and the programs underneath them even if they're nested folders(it does flatten the structure).
Version 1.5.1
-----------
IMPORTANT: Please remove the app and re-install. There were some deeper changes that had to be made for some of the following fixes.
Added a sensor view
Added devices that are sensors to the sensor view when querying an ISY
Dimmers, switches and sensors have their own templates
Fixed issue when existing folders could not be removed after being added (Might require a remove of the app and re-install)
Moved programs onto the right menu and made them generic for more of a setup look
Added runThen and runElse buttons for programs.
Programs can now be added like any other device into any folder (run is assumed for now).
Fixed a few crashing issues when going between menus.
Version 1.5
-----------
- Scene buttons now give feedback when pressed.
- Switches for http/https and remote/local network
- Changed name of default folder
- ISY portal is the default remote connection
- Added About page with version
- Fixed issue where button tracking wasn't working for some ISY devices.
- Changed the add icon to green. Isn't it pretty?
- You can now add new folders or existing folders to a view.
- When adding devices you can now click on them to add/remove them from the same page.
- When clicking to add devices it will no longer add duplicates.
- Now when you choose a device you can rename it you don't have to go to edit mode.
- There is a new page for Programs that allows you to run them, disable them or see when they were last run.
-----------
Performance Improvements
Switches now show the message associated with them and not the dimmer. i.e. locked, on, off, etc
Added a yellow border for on to make them look more distinguished.
Fixed an issue with the data load from ISY where some of the devices weren't going into the correct categories.
Added an options menu with the option to disable the view scrolling feature.
Flash a yellow border around the scene buttons when pressed on/off
Version 1.5.2
-----------
Other UI elements now refresh after scenes are turned on/off or programs are run.
Programs in right menu now shows all folders and the programs underneath them even if they're nested folders(it does flatten the structure).
Version 1.5.1
-----------
IMPORTANT: Please remove the app and re-install. There were some deeper changes that had to be made for some of the following fixes.
Added a sensor view
Added devices that are sensors to the sensor view when querying an ISY
Dimmers, switches and sensors have their own templates
Fixed issue when existing folders could not be removed after being added (Might require a remove of the app and re-install)
Moved programs onto the right menu and made them generic for more of a setup look
Added runThen and runElse buttons for programs.
Programs can now be added like any other device into any folder (run is assumed for now).
Fixed a few crashing issues when going between menus.
Version 1.5
-----------
- Scene buttons now give feedback when pressed.
- Switches for http/https and remote/local network
- Changed name of default folder
- ISY portal is the default remote connection
- Added About page with version
- Fixed issue where button tracking wasn't working for some ISY devices.
- Changed the add icon to green. Isn't it pretty?
- You can now add new folders or existing folders to a view.
- When adding devices you can now click on them to add/remove them from the same page.
- When clicking to add devices it will no longer add duplicates.
- Now when you choose a device you can rename it you don't have to go to edit mode.
- There is a new page for Programs that allows you to run them, disable them or see when they were last run.
xControl FAQ
Click here to learn how to download xControl in restricted country or region.
Check the following list to see the minimum requirements of xControl.
iPhone
iPad
xControl supports English
