Barometer & Altimeter Pro

4.1.1 for iPhone, iPad
Free
7.8

126 Ratings

Size

20.3 MB

Screenshots for iPhone

iPhone
Barometer & Altimeter Pro Description
This app uses the barometric pressure sensor built into all the newer iPhone, iPad and Apple Watch Models sold after 2016 with few exceptions. You need one of these newer devices to use this App. See below which older iPhone, iPad and Apple Watch without this sensor are not supported!

This App features a Barometer for weather, an Altimeter for outdoor activities, a barometric Trend and a Notification Center Widget.

Even without the optional In-App-Purchase this is a fully functional Barometer with absolutely no draw-backs and all important features accessible. Always without ads! (See "Pro Features" at the end). No internet connection required, no data transmitted - runs on your device only!

Keep an eye on the barometric pressure and be your own weather forecast! This little app uses only GPS (optional) and the new barometric pressure sensor to calculate the barometric pressure used in weather forecasts. The new iPhones have a barometric pressure sensor built in so this app works completely without internet. The handy marker helps you keep track of changes in the barometric pressure and let's you predict weather changes! Please realize, that a single barometric pressure reading is not enough to tell the current weather situation but the barometric pressure and its change over time is a very good indicator for weather changes!

Now you can also see the trend in barometric pressure with graph charts displaying the measurements taken during the last 30 days! (6h, 12h, 24h, 3d, 7d, 14d, 30d)

The Altimeter helps you track your altitude changes based on the change of pressure. Just set your reference pressure and altitude in order to use the Altimeter for checking how high up the mountain you have climbed (works for other activities too). The App does not use GPS for the Altimeter.

Please Note that on older devices such as the 4S, 5, 5S and 5C as well as on any iPod Touch and iPad Models older than iPad Air 2 or iPad Mini 4 as well as the Apple Watch 1 and 2, this app will not be able to read barometric pressure values and not display any useful information. The first generation 4-inch iPhone SE is not supported - the new SE (2020) is!

All basic features, the Barometer, the Altimeter, the Trend and the Widget are completely free to use for everyone and are fully functional at maximum accuracy available. No ads!
The only features with restricted access via In-App-Purchase are listed at the end under "Pro Features". Those are nice to have features for power users or those that want to show their support for the App!

Features (free for everyone)
- Barometer for weather
- Altimeter for outdoor activities
- HomeScreen Widget (iOS 14 and newer)
- Today-View Widget (all Versions)
- Watch App
- Up to 30d trend visualised with graphs
- Interactive timeline on the trend graphs
- No internet connection required since the sensor is built into the new iPhones and iPads
- Supports 6 different pressure units
- Support for 2 different altitude units
- Analog Barometer with support for all 6 units
- Configurable "displayed accuracy" / number of decimals
- Supports setting a custom marker so you can track changes in barometric pressure
- Manual altitude setting or automatic altitude updates based on GPS for the Barometer.
- GPS Correction. In case your GPS seems to always be 'off' a little you can now fix this easily.
- Portrait and Landscape support
- No ads! No data collection beyond your device (history and settings). No web communication at all.

Pro Features (one time In-App Purchase required)
- Change the Barometer Face
- Fishing Barometer
- Two scales on the Barometer
- Data export in CSV Format
Barometer & Altimeter Pro 4.1.1 Update
2021-01-04
* Introducing a new iOS14 Widget: See all important information right on your Home Screen at a glance - regularly updating
* Option to use light or dark mode permanently or keep the automatic setting based on your phones overall appearance
* Small bug fixes on the iOS and watchOS Apps
More Information
Price:
Free
Version:
4.1.1
Size:
20.3 MB
Update Date:
2021-01-04
Developer:
Steffen Bauereiss
Language:
English German

Safe to Download

AppPure.com and the download link of this app are 100% safe. The download link of this app will be redirected to the official App Store site, thus the app is original and has not been modified in any way.

Got it
X
Share

Share this page with your friends if you find it useful

Facebook Linkedin Pinterest Tumblr Twitter Whatsapp Line
4.1.1 2021-01-04
* Introducing a new iOS14 Widget: See all important information right on your Home Screen at a glance - regularly updating
* Option to use light or dark mode permanently or keep the automatic setting based on your phones overall appearance
* Small bug fixes on the iOS and watchOS Apps
4.0.2 2020-05-09
Updated the app for better support of iOS 13 with refined UI.
Support for Light and Dark Mode where applicable - keeping the original blue on the barometer page!
And of course some minor bugs got fixed again.
3.0.0 2018-01-04
- Introducing Apple Watch 3 support in the free version! Apple Watch 3 has a barometric air pressure sensor built in! This update introduces a stand alone watch app that shows station pressure, station altitude and sea level pressure. It includes a marker and all units known from the iOS application! At this time without historical data and as a digital display
- Temperature setting for the Altimeter. By adjusting the average outside temperature, the altitude formula can be more exact
- Small bugfixes
2.7.0 2017-12-12
- Changed the SET long press behaviour to support setting the marker to exact values
- Tap anywhere on the Barometer screen to see additional information on the marker
- The current marker value is now displayed as an additional line on the trend view (and disappears if marker is disabled)
- Trend view line color is now more transparent
- Some smaller bug fixes
2.6.1 2017-09-26
Fixed some minor bugs and reworked the UI ever so slightly to match the new design of iOS11.
Introducing support for the new aspect ratio of the iPhone X.
Fix for an issue with the new design on 4.7 inch screens set to "zoomed"
2.6.0 2017-09-22
Fixed some minor bugs and reworked the UI ever so slightly to match the new design of iOS11.
Introducing support for the new aspect ratio of the iPhone X.
2.5.1 2016-11-19
Since iOS 10.1 the barometric pressure sensor works again on iPads. This app update is NOT required to fix this issue and every old version of this app has since started working again!
The update fixes a bug with the trend arrow in the widget and includes some optimizations to make the app use less resources.
2.5 2016-09-15
Attention: If you are using an iPad, update to at least iOS 10.1. Earlier iOS 10 releases on iPad do not offer access to the barometer sensor!

Thanks for the continuing support and feedback. This is a compatibility update with the following changes:

- Update for better iOS10 compatibility (Swift 3)
- Widget in iOS10 style and with a barometric trend indicator
- Fixes an error where the trend view axes were not labelled
- The app does now record measurements in the history every minute while in foreground(!). Not only when "opened" or "marker set"
2.4.3 2016-02-10
Bugfix release 2.4.3.
This version brings a number of bug fixes that have been reported by you! Thanks for all the help.
* Fixes an issue where users could not use commas as decimal delimiter
* Fixes an issue where the lower end of the inHg Scale was incorrect
* Improves an issue where the Trend shows large spikes a lot.

And on top of that two much requested improvements:
* A small indicator tells you how accurate the GPS altitude was determined
* A tap on the center of the barometer also sets the marker
2.4.0 2015-09-25
Updated for iOS9
Supports iPad Split Screen
Supports iPhone 6S, iPhone 6S Plus, iPad Mini 4, iPad Pro
2.3.2 2015-07-15
Bugfix release:
- Fixes graphic display issues for some users
- Fixes widget issues where the altitude wasn't updated for some users

and also a small new feature that some of you requested:
Longpress on "Set" displays the time of when the marker was last adjusted.
2.3.1 2015-05-27
Interactive Trend View improved. Now shows the exact pressure at the selected point in time. (interpolated in between two measurements).

Bugfix: CSV-Export now generates a real CSV file.
Additionally: Improved CSV-Export with dates formatted for your timezone and with your selected unit for pressure and altitude. Now also includes sea-level corrected pressure values. Export not freezing the app temporarily anymore (for some users).
2.3 2015-05-14
A big update with a set of new features!

The continuous work on this project, that started with me just wanting to have my own barometer App, has now led to a set of new features that have been requested by a lot of users. Thanks for all your feedback.
I hope I don't disappoint anyone by announcing, that Barometer now offers one single (and for all times one and only) In-App-Purchase to get access to some of those new features. The app will remain free and all features you already know will remain free and available the same way you know them. This App will also never introduce Ads.

Free new Features:
- Bugfixes
- Often requested: Analog Barometer can now show station pressure.
- GPS Correction: In case your GPS seems to always be 'off' a little you can now fix this easily.

The new Pro Features:
- Barometer Faces (finally!)
- Face: Classic
- Face: Metal
- Face: Fishing Barometer [In case this needs to be adjusted: You fishermen out there let me know!]
- Second Scale. The Barometer can now display two scales. The main one just like before and optionally a second smaller one with a different unit.
- Data export. Generates a CSV-String that you can send to your computer for further evaluation!

Regarding the Barometer Faces: I am open to any suggestions and help from the community. If you want to design a royalty free Barometer face to share...
2.2.1 2015-02-26
2.2.1
- minor bug fix

2.2
- Introduced full Landscape support on both iPhone and iPad.
- Added atm and psi analog faces - now complete!
- Trend view now has an interactive timeline. Simply move your finger across the graph.
- Trend view remembers your last timeframe setting.
- Trend view can now display either sea level corrected pressure or station pressure.
- A tap on the today view widget opens the app.
- Easier on the GPS (setting).
- Altimeter now offers manually set values for reference altitude and pressure. This makes it even more flexible.
- Localization for "German" added
2.2 2015-02-18
- Introduced full Landscape support on both iPhone and iPad.
- Added atm and psi analog faces - now complete!
- Trend view now has an interactive timeline. Simply move your finger across the graph.
- Trend view remembers your last timeframe setting.
- Trend view can now display either sea level corrected pressure or station pressure.
- A tap on the today view widget opens the app.
- Easier on the GPS (setting).
- Altimeter now offers manually set values for reference altitude and pressure. This makes it even more flexible.
- Localization for "German" added
2.0 2015-01-03
Some much requested features are finally here!

- Trend/History Graph: See a 6h, 12h, 24h, 3d, 7d, 14d or 30d trend in barometric pressure on a graph chart!
- Now with psi and kPa
- Anlog dial now also supports inHg and kPa (others follow)
- Adjust the displayed number of decimals
- New Info page with a (very) short manual
1.4 2014-11-26
- Added an Altimeter for outdoor activities
- Cleaner interface with a separate Settings page. No more settings on the Barometer view.
- Reworked large parts of the App internals in preparation for the next major update. Stay tuned!

Thanks again for all the feedback!
1.3 2014-11-16
- Widget! Check the pressure directly in the Today-View/Notification-Center!
- Corrected some labels in the App
- Manual altitude setting (if you decide you do not want GPS)
- New App logo matches the one on the app store

Thanks for your feedback!
1.2 2014-11-08