3.8.1
2023-06-29
- Bugfix storing the wh value of the second battery
- Bugfix Leg power and cadence display with TCU MasterMind and Levociraptor Gen2
3.8.0
2023-03-29
- Added support for new Levociraptor
- Changed dropdown menu in Bike Setup and Display configuration
3.7.10
2023-01-11
Added support for new firmware battery x.6
3.7.9
2022-06-02
Bug fix edit Levociraptor phone numbers
3.7.8
2022-05-10
Correct speed multiplier management with Levociraptor
3.7.7
2022-02-17
- Added voice message on bike and / or Levociraptor disconnected (linked to the configuration of the GPS out of coverage)
- Bugfix calculating altitude with Levociraptor (increased the time to 15 seconds before invalidating the levociraptor data)
3.7.6
2021-10-23
- Added compatibility with battery 2.5.4
- Increased the filter for altitude measurement
3.7.5
2021-09-23
- Added compatibility with Levo 2018 and x33 firmware
- Bugfix displays data in miles
3.6.4
2020-12-06
- Corrected compatibility with iOS 9
3.6.3
2020-11-10
- iOS 9 compatibility reintroduced
- Bugfix: Voice message of waypoints
- Bugfix: Time in TCX with date / time format set to 12H
3.6.2
2020-11-01
- Added compatibility with WayPoint with special description
- Bugfix: Duplicate text for cardio zone 5
- Bugfix: Calculation of battery consumed with SL
- Bugfix: Barometer management
- Use google maps version 4.0.0
3.6.1
2020-10-14
- Bugfix: Barometer calibration on autostart
- Bugfix: Crash on gradient display on map display
3.6.0
2020-10-07
- Added barometer handling (for the phones that have the barometer)
- Added gradient in the display (to be used only with barometer)
- Added cardio zones
- Added SL extender management
- Bugix: Display of average consumption with additional battery
- Bugfix: Changed green ball not visible for old iOS version
- Bugfix: long text visualization
- Update to XCode 12.0.1 for iOS 14
3.5.11
2020-07-21
- Added management of version 9.32 for Vado bikes
- Correct battery display for Levo SL
- Bugfix BPM decrease from remote command
- Update to XCode 11.6
3.5.10
2020-06-11
- Now in the map view, you can view your cadence and speed without dedicating 2 specific fields
- Now the background color of the assistance percentage changes to a second part of the assistance level set, so that you have an extra field available
- Now the background of the engine and battery temperature are colored according to the value
- Added remote control commands to increase and decrease the Smart HR reference BPM
- Added voice message for high heart rate (10% above the threshold set in the Smart HR)
- Bugfix time display on map
3.5.9
2020-04-24
- Added download limitation of 10000 titles at a time
- Bugfix: GPX import with coordinates with longitude less than 100
- Bugfix: GPX import with special files
- Bugfix: display of biker power and average engine on saved tours
- Update to XCode 11.4.1
3.5.8
2020-04-07
- Now if the cadence is greater than 10, the moving bike is considered
- Added configuration flag to calculate the range including the downhill KM
- Now if you rename a file, it is checked that the extension is GPX otherwise it is no longer displayed
- Moved the graphics to avoid conflicts with the iPhone X bar
- Now the + and - keys in the bike monitor are +/- 5 watts and +/- 10 watts or +/- 2% and +/- 5% depending on whether the Smart Power is active or not
- Added auto start and continuous auto ride configuration options
3.5.7
2020-02-26
- Review the configuration interface of Smart Power
- Added preset for Smart Power configuration
- Added the ability to upload all statistics to Strava
- Added ability to rename GPX
- Added configuration parameter to automatically lower the display brightness (to save battery). The display is reactivated on the change of assistance or on remote commands
- Removed Double Pop Up On New Tour
- Bugfix: Calculation of Wh / km when there is the second battery
- Bugfix: Correct display of data uploaded to Strava
3.5.6
2020-01-24
- Increased the maximum of the second battery to 1500wh
- Now if there is a Strava upload error due to authentication, authentication is automatically requested
- Bugfix upload activity in Strava
3.5.5
2019-12-03
- Added the functionality of the bell via remote control
- Added compatibility with firmware 2.32.2 (2018)
- Added TCU version as per Mission Control
- Bugix: GPX Import
- Update Xcode for iOS 13.2.1
- Updated MapBox library to 5.5.0
- Now the Smart Power in non Expert has the leg power decreased in TRAIL and TURBO
3.5.4
2019-10-10
- Bugfix: iOS 13 dark mode: correct colors
- Now you don't need to have GPS permission on "Always" but just follow "When in use"
3.5.3
2019-09-28
- The speed multiplier can reach up to 4 and has steps of 0.1
- Fixed GPX import with online tag
- Added the possibility of not showing the initial disclaimer message
- "Stop" key inserted to stop downloading maps
- Update for ios 13
- Update mapbox v5.4.0
- Bugfix: Crash with iOS 13
3.5.2
2019-08-30
- Added compatibility with new Levo battery sign 2019 2.4.4
- Added GPX support without end point tag
- Bugfix: count of lap time that failed to calculate the height difference, average speed and distance
3.5.1
2019-08-01
- XCode Update 10.3
- Now the tour data is saved every 20 seconds
- Added speed multiplier (to be used only if a speed sensor data modification system is installed)
- Bugfix: Map rotates in direction of ride
3.5.0
2019-07-02
- Added MapBox offline maps
- Wh also displayed of the second battery in the bike monitor
- Added Strava description with ride data
3.4.3
2019-05-10
- Inserted second battery management
- Now the static values are restored even if you are not using Smart Power
- Update for iOS 12.2
- Bugfix: Distance calculation with bike sensor
- Bugfix: GPX import with larger longitudes 100
- Bugfix: CSV header creation
- Bugfix: Reading data at the beginning of the tour
3.4.2
2019-04-16
- Now it is possible to start the ride without the bike connected to use the app with a different bike than the Levo / Kenevo
- Activity upload button on Strava active only at the end of the ride
- Separate voice messages in English and American
- Bugfix: Dedicated leg power setting for turbo mode
- Bugfix: Optimized GPS update
- Bugfix: Map orientation in driving direction
3.4.1
2019-04-02
- Added upload activity on Strava
- Bugfix: GPS management and speed sensor
3.4.0
2019-03-20
- Added remote control management
- Increased the help of the Smart HR when connected to the Smart Power
- Added "Support BLEVO" page
- Added audio message to understand when the GPS is not in coverage
- Bugfix: Now if it does not find the GPS use the bike sensors to calculate the movement
3.3.4
2019-02-04
- Changed the name from "Map to north" in "Map to drive direction"
- Added Italian translation
- Bugifx: Audio messages in the background with screen off
- Bugifx: Map display with invalid values
- Bugfix: Management of cadence at zero
- Bugfix: Setting the configuration name on firmware x.23
- Bugfix: GPX reading from Strava
- Bugfix: Fixed GPX header (failed to import the file on some tools)
3.3.3
2019-01-10
- Now the automatic pause resumes only if the speed is greater than 2km / h
- Added on the Marker map with the name specified in the GPX
- Added on the map Waypoints specified in the GPX
- Added voice message when you are near a waypoint or Marker with name
- Now you can remove GPX files
- Now the display of the battery status in the map is green if charged and red if it is discharged
- Bugfix: now when BLEvo starts, it does not disable any active audio player
- Bugfix: now even with the screen off, the recording will continue
- Bugfix: now the GPS service is stopped correctly
3.3.2
2019-01-01
- Now it is possible to view more than one GPX track on the map
- GPX tracks can now be uploaded with file sharing via iTunes or via an email attachment
- Now you can download the CSV, GPX, TCX created by sharing files via iTunes
- Added time of day in the selectable fields for the bike monitor
- Bugfix: saving change Smart Power legs during the tour
3.3.1
2018-12-22
- Added GPX on the map
- Added map configuration menu
- Added ability to quickly change from the display with the map to the normal one
- Added the possibility to keep the map always oriented towards the north
- Bugfix: data in miles also in the new display with the map
3.3.0
2018-12-18
- Added new display with the map
- Optimized Bluetooth connection
- Bugfix: Corrected graphical position of the Smart HR configuration
3.2.1
2018-12-13
- Added display of static settings in the smart power configuration
- Optimized Bluetooth connection
- Bugfix: improved accuracy in the count of km traveled when the bike sensor is used
3.2.0
2018-12-09
- Added the view of the data recorded on the map
- Now you can keep the statistics of all the tours stored and reviewed them
- Now, after pronouncing the messages, the audio resource is released to allow you to continue to listen to other audio sources.
- Optimized the Smart HR connected to Smart Power
- Removed animation when going in bike setup and / or bike monitor
- Bugfix: Cadence was not stored in the CSV
- Bugfix: Configuration of Speed and Wheel Size values
3.1.4
2018-11-27
- Added autonomy in audio messages
- Bugfix: Configuration of Speed and Wheel Size values
- Bugfix: Filtered invalid cadence values
3.1.3
2018-11-19
- Now the statistics of the Levo 2019 take into account the biker power and cadence even when the bike is OFF
- Now you can only view the speed and cadence numbers in the bike monitor
- Bugfix: Display KCalc consumed
3.1.2
2018-11-09
- Now the acceleration can be set from 0% to 100% with step of 1%
- Bugfix connection on Levo different from 2019
3.1.1
2018-11-08
- Corrected the value of Wh for the 2019 levo with 700 battery (added a factor of 0.9157)
- Now the limit speed can be 20Km/h
- Added the possibility to modify the acceleration for the Levo 2019
- Added cadence reading also for Levo 2019
- Bugfix PP % and Shuttle %
3.1.0
2018-11-02
- Added battery monitor
- Corrected the value of Wh for levo 2019 (added a factor of 0.9)
- Added checks to avoid ECO at 0%
- Bugfix timezone in the TCX file
3.0.2
2018-10-28
- Added kcal consumed also in the bike monitor
- Added Levo 2019 search with code 0000000000000000
- The default wheel size is 2300 for the Levo 2019
- Bugfix timezone in the TCX file
3.0.1
2018-10-11
- Added Spanish
- Added battery beep management
- Added Stealth Mode management (Levo 2019 only)
- Added voltage and battery current in the CSV
- Added in the statistics the kcal consumed
- Bugfix size button
3.0.0
2018-10-03
- Compatibility with iOS 12 (XCode 12)
- Review the graphics to configure Peak Power
- Initial partial compatibility with the Levo 2019 (thanks ‘EMTB Forums’ members for the test)
- Added new Peak Power management
- Shuttle percentage change added
2.8.1
2018-09-19
- Decreased minimum value of Smart Power to 50 watts
- Revised initial menu
- Correct dynamic power management
- Added German translation
2.8.0
2018-09-11
- Added customization of the display
- Added Apple Watch Heart Rate
- Added time of day and phone battery in the bike monitor
- Added feet and miles in the new bike monitor
- Added min and max and average of motor and battery temperature
- Translated New Bike monitor in Italian
- Bugfix on "BLEvo Smart" preset
- Bugfix on auto reconnection
- Bugfixes
2.7.2
2018-08-27
- Bugfix New Bike Monitor with cardio
2.7.1
2018-08-24
- Modified acceptance of GPS accuracy. Now it's okay under 48 meters
- Added +/- 1 keys on the Bike Monitor in order to modify the assistance
- Bugfix new bike monitor on iPhone X
- Bugfix
2.7.0
2018-08-22
- New bike monitor
- Bugfixes
2.6.4
2018-08-13
- Increased speed of the reactivity of Smart Power when high reactivity is selected
- Optimized Smart Power algorithm. Improved pedabilty by including corrections based on human physiology (thanks to Stefano Duranti)
- Added configuration for use Fahrenheit instead Celsius