Age Rating
SSTV Slow Scan TV Capturas de tela
About SSTV Slow Scan TV
Want to display or send SSTV transmissions, without using a bulky computer? SSTV Pad lets you decode and display Ham (Amateur) Radio SSTV (Slow Scan TV) transmissions. Just connect your device to an HF radio (or even set it next to the radio's speaker), tune in an SSTV frequency, and watch the pictures. SSTV Pad decodes all of the popular SSTV modes, including Robot, Scottie, Martin, and more. Some modes are receive only.
Decoding of SSTV transmissions begins automatically as soon as the start of image audio signals are detected, and the image format is automatically selected. Manual control is also available for use when receiving conditions are poor. Timing signals (phase and skew) can be adjusted to compensate for mismatches with the sending station.
Received images can be saved - including automatically as they are received. You can leave the app running unattended, and come back to view all the received images. You can review saved images, as well as send them via email, and use iTunes file sharing to transfer them to your computer. You can even share them on your Facebook page, or tweet them to your followers, directly from the app! (iOS 6 and later)
You can also transmit images, taken from your saved photos or taken with your device's camera. Text, such as your callsign, can be added to the sent image.
Buy your copy right now, and start decoding and displaying SSTV transmissions in minutes. Just set your iPhone or iPad next to the radio speaker, and watch the pictures come rolling in.
Note: If you cannot see the transmit button, go to the Accessibility settings for your device and turn Button Shapes OFF. It makes the buttons too large so you cannot see them all.
Also, It is very important to have a well tuned signal of good quality, and make sure you get the audio from your radio to your device without adding additional distortion, or auto start and mode detect will not work optimally. Please see this page for tips on using the app and connecting your radio: http://www.blackcatsystems.com/ipad/iPad_SSTV_Pad_FAQ.html
You can also use Bluetooth audio devices to feed audio into your device. Please be sure to use a good quality Bluetooth device, that does not distort the audio.
Modes supported for reception (not all modes can be transmitted):
B&W 8 sec
B&W 12 sec
B&W 24 sec
B&W 36 sec
Martin M1
Martin M1
Martin M2
Martin M3
Martin M4
MP73"
MP115
MP140
MP175
MR73
MR90
MR115
MR140
MR175
PD 50
PD 90
PD 120
PD 160
PD 180
PD 240
PD 290
Robot 12C
Robot 24C
Robot 36C
Robot 72C
SC-1 32 sec
SC-1 16 sec
SC-1 8 sec
SC-2-60
SC-2-120
SC-2-180
Scottie S1
Scottie S2
Scottie S3
Scottie S4
Scottie DX
Decoding of SSTV transmissions begins automatically as soon as the start of image audio signals are detected, and the image format is automatically selected. Manual control is also available for use when receiving conditions are poor. Timing signals (phase and skew) can be adjusted to compensate for mismatches with the sending station.
Received images can be saved - including automatically as they are received. You can leave the app running unattended, and come back to view all the received images. You can review saved images, as well as send them via email, and use iTunes file sharing to transfer them to your computer. You can even share them on your Facebook page, or tweet them to your followers, directly from the app! (iOS 6 and later)
You can also transmit images, taken from your saved photos or taken with your device's camera. Text, such as your callsign, can be added to the sent image.
Buy your copy right now, and start decoding and displaying SSTV transmissions in minutes. Just set your iPhone or iPad next to the radio speaker, and watch the pictures come rolling in.
Note: If you cannot see the transmit button, go to the Accessibility settings for your device and turn Button Shapes OFF. It makes the buttons too large so you cannot see them all.
Also, It is very important to have a well tuned signal of good quality, and make sure you get the audio from your radio to your device without adding additional distortion, or auto start and mode detect will not work optimally. Please see this page for tips on using the app and connecting your radio: http://www.blackcatsystems.com/ipad/iPad_SSTV_Pad_FAQ.html
You can also use Bluetooth audio devices to feed audio into your device. Please be sure to use a good quality Bluetooth device, that does not distort the audio.
Modes supported for reception (not all modes can be transmitted):
B&W 8 sec
B&W 12 sec
B&W 24 sec
B&W 36 sec
Martin M1
Martin M1
Martin M2
Martin M3
Martin M4
MP73"
MP115
MP140
MP175
MR73
MR90
MR115
MR140
MR175
PD 50
PD 90
PD 120
PD 160
PD 180
PD 240
PD 290
Robot 12C
Robot 24C
Robot 36C
Robot 72C
SC-1 32 sec
SC-1 16 sec
SC-1 8 sec
SC-2-60
SC-2-120
SC-2-180
Scottie S1
Scottie S2
Scottie S3
Scottie S4
Scottie DX
Show More
Novidades da Última Versão 2.0
Last updated on Jan 10, 2017
Versões Antigas
This app has been updated by Apple to display the Apple Watch app icon.
Can now add multi line text to transmitted images.
Updates for iOS 10.2
Can now add multi line text to transmitted images.
Updates for iOS 10.2
Show More
Version History
2.0
Jan 10, 2017
This app has been updated by Apple to display the Apple Watch app icon.
Can now add multi line text to transmitted images.
Updates for iOS 10.2
Can now add multi line text to transmitted images.
Updates for iOS 10.2
1.9
Jul 7, 2016
Added an option to save received images to your Photos.
Fixed a bug where some controls would not be visible on an iPad if the app was launched in landscape orientation.
Fixed a bug where some controls would not be visible on an iPad if the app was launched in landscape orientation.
1.8
Jun 18, 2015
Support for Bluetooth audio devices.
1.7.1
Feb 28, 2015
Eliminated blank areas in saved pictures.
1.7.0
Feb 21, 2015
Fixed bugs that could cause a crash in iOS 8.1.3.
Corrections to the PD modes.
Corrections to the PD modes.
1.6.1
Oct 8, 2014
Fixed a bug that could cause a crash when deleting a saved picture.
Updates for iOS 8.
Updates for iOS 8.
1.6
Sep 17, 2014
Updates for iOS 8
1.5
Aug 1, 2014
Added ability to share received images to Facebook, as well as tweet them.
Fixed a bug that caused some images to be rotated when transmitted.
Fixed a bug that caused some images to be rotated when transmitted.
1.4
Apr 25, 2014
Updates for iOS 7.1
1.3
Jan 14, 2013
Added the ability to transmit SSTV pictures
1.2.1
Sep 19, 2012
Bug fixes for iOS 6.0
1.2
Oct 31, 2011
Corrected a bug that could cause a crash when trying to email an image.
1.1
Oct 17, 2011
iOS 5 compatibility
iPhone/iPad support
iPhone/iPad support
1.0.0
Aug 27, 2010
Preço de SSTV Slow Scan TV
Hoje:
R$ 19,90
O Mais Baixo:
R$ 16,90
O Mais Alto:
R$ 19,90
SSTV Slow Scan TV FAQ
Clique aqui para saber como baixar SSTV Slow Scan TV em um país ou região restrita.
Confira a lista a seguir para ver os requisitos mínimos de SSTV Slow Scan TV.
iPhone
Requer o iOS 6.0 ou posterior.
iPad
Requer o iPadOS 6.0 ou posterior.
iPod touch
Requer o iOS 6.0 ou posterior.
SSTV Slow Scan TV suporta Inglês