Ti2 Control
The Controller for ECLIPSE Ti2
Grátis
2.91for iPhone, iPad and more
Age Rating
Ti2 Control Capturas de tela
About Ti2 Control
This application is used to make settings for the Inverted Research Microscope ECLIPSE Ti2-E/Ti2-A, control the Ti2-E, display the Ti2-A status, and display the Assist Guide.
[Supported Microscopes]
- Nikon ECLIPSE Ti2-E (FW 2.00 or later)
- Nikon ECLIPSE Ti2-A (FW 1.21 or later)
[System Requirements]
- iOS 13.3.1 or later.
- iPhone 7 or later, iPad (sixth generation) or later.
- There is no guarantee that this application will run on all devices.
[Main Features]
- Enable to setup the microscope.
- Enable to detect the position of accessory (e.g. motorized or intelligent nosepiece).
- Enable to control the motorized accessory (e.g. motorized stage).
- Enable to view or capture live image of the embedded Assist Camera.
- Enable to confirm that all the correct microscope components are in place for chosen observation method.
- Provides interactive step-by-step guidance for microscope operation and troubleshooting.
[Notes]
- Turn off the mobile data communication of the iPhone/iPad before using the TI2 Control.
- To use this application, the Wi-Fi router and iPhone/iPad which satisfy the required specifications are necessary.
- When Ti2 Control searches the microscope, network traffic will be increased, as it sends packets to all devices which are connected in same network segment. So, please use dedicated router for Ti2 Control.
[Instruction Manual]
For more information, see the instruction manual, which can be downloaded from the following URL:
https://www.manual-dl.microscope.healthcare.nikon.com/en/Ti2-Control/
[Trademark Information]
- iPhone, iPad, and iPod touch are trademarks or registered trademarks of Apple Inc in the United States and other countries.
- App Store is a service mark of Apple Inc.
- All other tradenames mentioned in this document are the trademarks or registered trademarks of their respective holders.
[Supported Microscopes]
- Nikon ECLIPSE Ti2-E (FW 2.00 or later)
- Nikon ECLIPSE Ti2-A (FW 1.21 or later)
[System Requirements]
- iOS 13.3.1 or later.
- iPhone 7 or later, iPad (sixth generation) or later.
- There is no guarantee that this application will run on all devices.
[Main Features]
- Enable to setup the microscope.
- Enable to detect the position of accessory (e.g. motorized or intelligent nosepiece).
- Enable to control the motorized accessory (e.g. motorized stage).
- Enable to view or capture live image of the embedded Assist Camera.
- Enable to confirm that all the correct microscope components are in place for chosen observation method.
- Provides interactive step-by-step guidance for microscope operation and troubleshooting.
[Notes]
- Turn off the mobile data communication of the iPhone/iPad before using the TI2 Control.
- To use this application, the Wi-Fi router and iPhone/iPad which satisfy the required specifications are necessary.
- When Ti2 Control searches the microscope, network traffic will be increased, as it sends packets to all devices which are connected in same network segment. So, please use dedicated router for Ti2 Control.
[Instruction Manual]
For more information, see the instruction manual, which can be downloaded from the following URL:
https://www.manual-dl.microscope.healthcare.nikon.com/en/Ti2-Control/
[Trademark Information]
- iPhone, iPad, and iPod touch are trademarks or registered trademarks of Apple Inc in the United States and other countries.
- App Store is a service mark of Apple Inc.
- All other tradenames mentioned in this document are the trademarks or registered trademarks of their respective holders.
Show More
Novidades da Última Versão 2.91
Last updated on Oct 30, 2023
Versões Antigas
- Improved GUI.
- Fixed some minor bugs.
- Fixed some minor bugs.
Show More
Version History
2.91
Oct 30, 2023
- Improved GUI.
- Fixed some minor bugs.
- Fixed some minor bugs.
2.70
Jan 31, 2022
- Improved GUI.
2.60
Nov 30, 2021
- Improved GUI.
2.50
Jun 30, 2021
- Improved GUI.
2.40
Feb 4, 2021
- Improved GUI.
2.30
Jun 30, 2020
- Improved GUI.
2.20
May 14, 2019
- Improved GUI.
- Fixed some minor bugs.
- Fixed some minor bugs.
2.10
Nov 15, 2018
- Improved GUI.
- Fixed some minor bugs.
- Fixed some minor bugs.
2.00
May 8, 2018
- Home screen can be changed to NIS-Elements style.
- Added indivisual ajustments guides and ajustment guide tools at Assist Guide.
- Improved GUI.
- Fixed some minor bugs.
- Added indivisual ajustments guides and ajustment guide tools at Assist Guide.
- Improved GUI.
- Fixed some minor bugs.
1.2.0
Jan 9, 2018
- Added iOS11 support.
- You can now execute functions assigned to the function buttons on the microscope or the joystick using Ti2 Control. (Ti2-E FW 1.20 or later)
- You can now assign functions to the custom function buttons on the Home screen and execute them. (Ti2-E FW 1.20 or later)
- You can now transfer the setting files to other terminals.
- Improved GUI.
- Fixed some minor bugs.
- You can now execute functions assigned to the function buttons on the microscope or the joystick using Ti2 Control. (Ti2-E FW 1.20 or later)
- You can now assign functions to the custom function buttons on the Home screen and execute them. (Ti2-E FW 1.20 or later)
- You can now transfer the setting files to other terminals.
- Improved GUI.
- Fixed some minor bugs.
1.1.0
Jul 31, 2017
Ti2 Control FAQ
Ti2 Control está disponível fora dos seguintes países restritos:
Iraq,Afghanistan,Turkey,Libya
Confira a lista a seguir para ver os requisitos mínimos de Ti2 Control.
iPhone
Requer o iOS 10.3 ou posterior.
iPad
Requer o iPadOS 10.3 ou posterior.
iPod touch
Requer o iOS 10.3 ou posterior.
Clique aqui para saber como baixar Ti2 Control em um país ou região restrita.