CarVantage

-Fix for hardware compatibility

20.1:
- Updated translations!
- Tweaked network timeout values for a less frustrating experience on unreliable internet connections.
- Various UI polish and cleanup.

- Fixed a bug with mode 16 loop status values being read as invalid.
- Fixed a rare situation that could corrupt scan data if a very specific set of vehicle communication errors occurred.
- Fixed a bug that could cause various items to unnecessarily reload on sporadic internet connections.

8.3.0:
- Added Indicator Library to the toolbox.
- Reduced app install size!
- Improved the loading screen for logbook/history items.
- Improved multi-language support & translations, and improved setting the correct language on launch.

- Fixed a text rendering issue on the history page.
- Fixed an issue that could prevent the timeline from switching languages when you change language preference.
- Fixed several text rendering issues on the report page.
- Fixed an issue that could cause the highlighted tab bar to de-sync from the active page if a vehicle with red status wear items was selected from the side menu.
- Fixed several pages that would not adjust their translations after a language change until the next launch of the app.
- Fixed a yellow flash effect that could occur on some pages when the phone’s GPU was heavily utilized.

8.2.11:
- Improved Bluetooth read/write speed!
- Further improvements to sensor compatibility

- Fixed a rare bug that could prevent enhanced scans on some vehicles with excessive response messages.

8.2.10:
- Improved bluetooth compatibility.
- Updated translations.

- Fixed various typos.

8.2.9:
- Speed improvements!

- Fixed a potential memory leak.
- Fixed a bug that could prevent some users from updating their passwords/accounts info.

8.2.8:
- Various UI polish and cleanup.

- Fixed a rare scenario where a specific series of page views during a scan could break the Report page.
- Several Dark Mode fixes/tweaks.

8.2.7:
- Several improvements to Dark Mode support throughout the app, including asset and text input improvements.

- Fixed a bluetooth issue for iOS13 users that happened to force quit the app with an active bluetooth connection open. Previous versions would require a power cycle on the sensor to reconnect, this should no longer be required.
- Fixed a race condition that could cause biometric auth prompts to appear after successful login if you logged in fast enough.

8.2.6:
- Reduced memory usage, and speed improvements!

- Emails containing .com.uk and other derivatives can now register.
- Fixed a bug that could prevent the report page from auto presenting after a scan on certain fast phones.

8.2.4
- Reduced app install size and memory usage!
- Updated Translations.
- Reduced memory load when backgrounding/quitting app.
- Improved clarity of the “oil change must be in the past” error, and included your current mileage in the warning.

- Fixed a bug that could cause the mileage input prompt to incorrectly warn you that your new input was significantly higher than before if you had your app’s distance unit set to kilometers.
- Fixed a potential issue that could prevent your timeline from updating upon switching to kilometers.

- Updated Translations
- Fixed a sizing issue on the details page

8.2.2:
- We’ve improved the DTC Report page to more clearly convey the difference between a Detected and Possible Issue.
- The mileage and oil change input screens now auto-format your input to include commas to help prevent typos.
- Reduced data usage.

- Updated 3rd party keyboard manager to hopefully squash any remaining input bugs!

8.2.1:
- Fixed various issues with launching from a push notification
- Fixed various issues with registration prepopulation.

8.2.0:
- If you have declined the new iOS13 bluetooth permission privacy prompt and then attempt to “tap to scan”, we will now send you to the proper page in your phone’s settings so that you can re-enable communication with your vehicle.
- Visual & Theming upgrades throughout the app.
- Optimized device generation and reduced app start-up time.

- Fixed some coloring issues on the timeline in dark mode.

8.1.6:
- When entering a new mileage you will now be warned if the new value is significantly higher than your current mileage relative to that mileage’s value, not just over a fixed value. Users with antique/high mileage vehicles will no longer have to hit “are you sure” every time they update!
- Dark mode improvements.

- Fixed a bug that could cause some users to not detect enhanced/advanced codes.
- The oil change input page will no longer allow you to set mileage changes that oil changes occurred at that are greater than the current mileage of the vehicle, preventing a typo from setting an oil change record far into the future.
- Fixed an issue that could cause some wear item icons on the maintenance page to be incorrectly tappable while their child elements were not ready to interact yet.
- Fixed a tab bar desync when launching the app for the first time and not setting a sensor up.

8.1.5:
- Speed improvements & optimizations for iOS13.
- Updated Translations

- Fixed several rare crashes

8.1.0:
- Dark Mode support! Every page in the app should now properly adapt to dark mode!
- Updated animations.

8.0.4:

- Fixed an issue that could cause the app to think it was still in the background when launched/backgrounded/foregrounded again rapidly.
- Hitting X on the mileage input screen will no longer auto-submit whatever mileage you might have input.
- Fixed a rare rabbit hole situation in the UI manager.

8.0.3:
- Improved login speed & network resilience.

- Fixed a rare bug when setting up a new vehicle.
- Fixed a rare bug that could cause tire tread wear items to become desynced.
- Fixed Procon users not being able to load mileages.

8.0.2:
- Based on your feedback, Canadian users will now have a quarter displayed for the “penny test” screen.
- We’ve updated our 3rd party keyboard manager to hopefully resolve missing “Submit” toolbar buttons for keyboard entry, namely mileage.
- Updated and rescaled graphics for the penny test page.
- Updated translations!
- Performance improvements throughout the app.

- Fixed a bug that could allow you to save a sensor without a name, and updated error messages.
- Fixed several infrequent timing issues that could prevent the timeline page from correctly scrolling, especially when switching vehicles.

8.0.1:
- Returning to a previous page should now properly animate with a transition spatially consistent with how you got there. Flipping right then returning flips left etc.

- Fixed a bug that could cause some Freeze Frames to be incorrectly reported as very low values (close to absolute minimum).
- Fixed a bug that could prevent exiting some screens after backgrounding/foregrounding the app rapidly.
- Improved state handling for the scan icon on the scan page. It should now be impossible to get in an invalid state when backgrounding/foregrounding the app.
- The scan page will no longer repeatedly send you to the report page while a scan is loading freeze frames.
- Fixed invisible text on the sensor setup pages for dark mode users.
- Dismissing the vehicle setup page no longer breaks the page for iOS13 users.

8.0.0:
- This update adds full support for iOS13, and fixes several unique issues related to dark mode on iOS13. Complete dark mode support will be coming in a future release!
- Significantly improved launch times.
- Significantly reduced app install size.
- Replaced the old picker UI with a new, more modern design.
- The last tab you had selected on the main page now persists across app launch.
- The diagnostic footer has been properly scaled down some on “max” sized devices.

- Fixed crash in emissions precheck related to vehicle selection.
- All sections of the app should work properly when in dark mode.
- You can no longer open a selection menu during vehicle creation if the next category is still loading, preventing several odd picker bugs.
- iOS13 users will no longer occasionally boot into a black screen.
- The page line on the main tab bar should no longer occasionally desync.
- Fixed a rare issue that could cause apps on the “Toolbox” page to be invisible.
- Mileage should now load for procon users.
- Phone number should now no longer incorrectly display “Optional” at signup.
- Invalid phone numbers will now show a proper error, instead of “server error”.
- Fixed a bug that could cause some sensors to report as invalid incorrectly.

7.4.6:
- We can now read even more types of codes!
- Further optimized new user signup.
- Updated translations.
- Reduced data usage during background scans, and reduced battery usage.
- Improved user account persistence.

- Fixed an issue that could pop up if you force quit the app immediately after completing an in app purchase

7.4.5:
- Improvements to background scan reliability, and further reductions in data usage!
- Updated translations.
- Additional speed improvements, so we’ll use even less of your battery!

- Fixed several rare background crashes.
- Malformed external resource URLs can no longer crash the app.

7.4.4:
- Speed improvements!
- Reduced data usage.

- Fixed some rare async caching issues.

7.4.3:
- Improved user persistence, and further clarified the logout warning.

- Fixed a bug that, if the app was set to kilometers instead of miles, could cause the input value to revert to miles if the submission of the new mileage failed for some reason.
- Fixed a bug that could prevent the delivery of push notifications/vehicle health alerts.

7.4.2:
- Added a “load failed” state to vehicles on the vehicle menu to handle situations were relevant data about the status of that vehicle failed to load. Tapping a vehicle in the menu in this state will batch reload any vehicles that experienced a load failure.
- Speed improvements and optimizations throughout the app.
- Improved logging to catch a rare logout issue.

- Fixed a bug that could cause wear item desync in rare scenarios.
- Fix for rare thread sync deadlock issue if the queue name was inexplicably null.

7.4.0:
- New multi-vehicle status system! We’ve improved how we load and display data for your entire fleet of vehicles and will now display this data on the vehicle menu. We’ve also improved how we alert you when components reach “critical” health levels.
- The scan page will now show a “Last Scan” shortcut if your last scan contained DTCs.
- If a DTC Report only has one active DTC, we will now auto-present the details page for you.
- DTC reports from the logbook will now show how many days ago they occurred.
- Speedups and improvements.


- All wear item pages should now be properly locked while their dependencies are loading, preventing any unexpected UI jitter.
- Fixed a potential desync issue with tire treads.

7.3.4:
- Further improvements to offline mode functionality.

- Fixed an issue that could prevent advanced diagnostics from running the first time you scan a car that was not previously on your account.
- Several logging and diagnostic fixes/improvements.

7.3.3:
- We’ve identified inconsistent app behavior resulting from phones that are nearly completely full. To resolve this issue we’ve moved where we save your settings & preferences to a more private area of your phone. To free up space on your iOS device, you can visit settings/general/iPhone storage for recommendations on how to free up space!
- We now better handle network errors when posting mileage & wear item updates.

- Fixed a bug that could prevent oil changes from saving at the correct mileage for some users.
- Fixed a bug that could prevent oil & mileage input if the first update failed due to a network error, and you closed and reopened the input prompt without entering a value on the 2nd attempt.

7.3.1:
- Improved background scan reliability.
- Updated translations!
- Improved safety checks and setup during initial registration to make sure you’re good to go before entering the app, so that you have the best possible experience!
- Significantly improved haptics latency.
- Improved threading/reduced main thread sync requirements on app boot for a smoother launch.

- Fixed an issue that could prevent mileage submission if you entered a large value, then attempted to enter a null/empty value.
- Fixed several rare issues with animation set/unsetting via improved layer tag management.

7.3.0:
- Improved how we handle local vehicle persistence in the (hopefully) rare event that our servers are down.
- Improved font size & readability for current mileage values on the timeline.
- The logbook now only shows new codes for state changes, in order to be less confusion. Tapping to open a log still shows the same values as before.
- This release now supports remote code clearing.
- Schedule service has been re-added to the maintenance page.
- User registration values should now persist if you back out of the app mid-registration

- Fixed an issue that could cause some vehicles to get stuck in a mileage calibration loop.
- Fixed a rare bug that could prevent saving a new mileage for a vehicle.
- Fixed some potential thread dead-locking via reducing synchronous dependencies.

7.2.3:
- Improved push notification reliability.
- Improved multi-path offline mode detection, as well as faster connection status detection on app boot. This should prevent the annoying “OFFLINE MODE” banner popup at app launch that immediately disappears!
- Memory usage reduction.

- Fixed a rare crash during background scans.
- Fixed a double-present issue when fixing disabled alerts.
- Fixed an issue that could cause “OFFLINE MODE” to become stuck on the banner if iOS began a network path migration from WiFi -> LTE and did not ultimately execute it.

7.2.0:
- Improved clarity of the Network Error popup during Offline mode based on your feedback.
- This release fixes several issues and edge cases that have popped up since the release of offline mode. We release as soon as we identify and correct issues to ensure the best possible experience!
- More translation updates.

- Fixed an issue that could cause freeze frames not to execute for some users.
- Fixed an issue that could prevent wear items from being savable if the network request to post a mileage update hung due to an unreliable network connection.
- Fixed a double-login/double-register bug that could occur if your app launched into the background at precisely the same time that iOS encrypted data became available, leading to a race condition.
- Fixed several memory corruption issues that arose due to thread conflicts that could occur in offline mode.
- Fixed a bug that could prevent resting voltage tests from saving on the battery page.

7.0.1:
- Further improvements to network request validation, and fixes for rare issues when switching back and forth between vehicles rapidly.
- UI Improvements to the Oil wear item page.
- Mileage tracking improvements.

- Fixed “placeholder” text in the logbook notes entry cell.
- Fixed an issue where the “No logs yet” page was scrollable.

6.14.0:
- We have added Oil as a wear item! You can now enter the mileage you changed your oil at and we will remind you when it’s due!
- We’ve added a new onboarding screen to educate new users on how wear items work.
- More improvements to the new-user experience.
- Improvements to the maintenance UI to more clearly convey when your vehicle is missing a mileage.
- During registration, we now more clearly explain how/why/what we send you push notifications for.
- Inputting/saving a vehicle mileage update is now much more smooth.
- Maintenance warning badges will no longer display while wear items are loading, preventing potentially confusing intermediate states.
- Updated translations for all our international users!

- Fixed an issue that could prevent loading very long logbooks, and smoothed out the loading process. Thanks for the bug-report video!
- Wear items will now properly update when a new mileage is created that impacts their health status.

6.13.7:
- Further refinement to the sensor setup process, and new user experience to reduce how long it takes to setup and improve clarity.
- Improvements and copy fixes users who haven’t setup a vehicle yet.
- When setting up a new sensor, tapping a sensor you’ve already registered will simply select that sensor and return you to the scan page instead of blocking your progress.

- Fixed a bug that could prevent us from detecting certain types of app errors.

6.13.6:
- Improvements to the registration page & setup flow.
- Increased font size in several places throughout the app.
- Optimizations and improvements!

- Fixed an issue that could prevent remote image caching if the URL was >1000 characters.

6.13.5:
- Improvements to how the app handles network errors, to improve reliability and user experience.

- Fixed a bug that could cause wear items to disappear if you backgrounded/launched the app many times very quickly.
- Fixed a rare bug that could cause the screen to get stuck in a blurred view if its presented view failed to appear.
- Fixed a bug that could cause the app to report “Connection Lost” to your bluetooth sensor, when the bluetooth sensor was really working fine and it was an internet issue.
- Fixed some minor issues related to tappability on the DTC Report page.

6.13.4:
- We’ve made improvements to the DTC Details page to more clearly and concisely convey diagnostic information.

- Fixed several popovers with incorrect offsets.
- Several fixes/improvements to the registration page.
- Fix for several keyboard bugs.

6.13.3:

- Added Toolbox & Emissions Precheck
- Wear Items that have not been set up on the maintenance tab are now more clear.

- Pressing both left and right side menu buttons on the main screen will no longer cause undefined, exciting behavior.
- The Mileage Input prompt will no longer allow you to copy-paste exotic non-numeric values into it and crash the app.
- “Tap To Scan” will now properly appear on the scan page when you don’t have any vehicles/have deleted all your vehicles.

6.13.2:

- Fixed a bug where VIN input could incorrectly allow whitespace/invalid characters, preventing you from adding a vehicle by VIN.
- Fix for rare crash when opening a historical scan while rapidly changing vehicles.
- Fixed several bugs wen saving/editing logbook items using “Other” or custom types.

6.13.1:
-Logbook has been renamed to "History".

- Fixed a bug that could break the main tab bar
- Fixed a bug that was causing views to disappear under transparency layers.
- Fixed a bug where, after filling out a VIN and selecting model information you could delete the vin before submitting and crash the app.

6.13.0:
- We have re-ordered the Diagnostic Details page to provide information in a more relevant and straightforward way.
- “Timeline” has been renamed to “Maintenance” to better convey its feature set.
- Issue Severity on the Diagnostic Details Page has been redesigned into a button + popover that provides more contextual information, as well as issue commonality.
- Headers for Symptoms, Resource Videos, and Resource links have been contextualized to better convey their relevance to your specific issue.
- Updated translations!

- Fixed several state bugs where “Tap To Scan” could appear incorrectly, and where exiting certain pages mid-scan could leave the wrenches in a weird state.
- Fixed an issue that could incorrectly scale down long vehicle names on the main page nav bar.

6.12.4:
- We’ve merged the timeline and wear items pages to make them more efficient and intuitive!
- Several improvements to how the app handles the situation where your Check Engine Light is mysteriously on and no codes are returned to us.
- We can now communicate with even more of your vehicle’s computers!
- UI Polish

- Fixed potential crash when receiving a push notification.
- Fixed several issues with popovers receiving weird/incorrect offsets.

6.12.3:
- Minor UI polish.
- Updated translations!

- Fixed a bug that could result in some CAN-11 vehicles displaying incorrect problems due to malformed data responses.
- Fixed a bug that could cause the miles timeline to appear even if you had selected kilometers.
- Fixed a bug where your mileage input preview would be in miles, even if you selected kilometers.
- Fixed a bug where background the app mid-vehicle-creation could cause inconsistent behavior on subsequent launch.

6.12.2:
- We now support specifying engine type when configuring a vehicle, in order to provide more accurate diagnosis of problems!
- Renamed My Account to Settings.


- Fixed several annoying bugs when interacting with maps.
- Fixed rare crash when playing sounds.
- Fixed a bug that could prevent the timeline page from reloading after entering a new mileage if that vehicle did not have a preexisting mileage.
- Fixed several iPad-only animation bugs.
- Fixed a bug that could cause the problem details page to break after you texted a screenshot of it.
- Fixed a bug that could cause some images not to load.
- Emailing support will now properly include your vehicles make/model/year

6.12.1:
- New & Improved Mileage input interface that also fixes several bugs with the old system, and can properly handle poor network conditions.
- Improved the help screen on the vehicle setup page.

- Fixed a bug that could prevent login.

6.12.0:
- Fixed a bug that could cause some vehicles to enter a mileage “needs calibration” loop, as well as 2 bugs that could prevent mileages from saving properly.
- Fixed a bug that could cause an infinite load in the vehicle menu.
- Fixed an issue that could reduce how frequently background scans occurred.
- Fixed a bug that could cause the user to get logged out when updating account information such as email/password/phone number.
- Fixed a wrongly-sized gesture recognizer on the penny test/tire measurement page, that could allow taps outside the penny to frustratingly change the penny measurement.

6.11.3:
- Improved general performance by reducing the number of network calls.

- Fixed a bug that could prevent background scans from functioning.

6.11.2:
- We can now check to see if your bluetooth radio is “busy” every time we communicate with your sensor! If your device’s bluetooth radio reports it’s too congested to transmit we will now wait for a while and try again when iOS lets us know it’s ready. This should result in much more reliable streaming/scanning when your iPhone is paired with multiple bluetooth devices such as AirPods, Apple Watch, or in-car radio! Before congestion could result in a disconnect.
- Speed improvements throughout the app’s UI, as well as bluetooth read/write speed via reduced application overhead.
- Updated translations!


- Fixed an issue that could prevent us from reading/debugging your diagnostic logs when you contacted support.
- Fixed a memory leak.

6.11.1: - Several major improvements to the way we display animations, making them smoother/fixing some long standing bugs. - Fixed a bug that could prevent you from being able to call a shop. - Fixed a bug that could prevent some animations from playing/updating if their initial value was too small.

6.10.8: - The Timeline page now shows you when the selected vehicle needs a mileage calibration. - Updated translations! - Improved new user experience. - Fixed a crash that could occur when scanning a vehicle. - Fixed an issue that could cause timeline page elements not to be colored properly in intermittent network scenarios.

6.10.6: - We’ve improved how we cache things, for better app performance when using the app in spotty network conditions. - Speed improvements, optimizations. - Fixed several bugs with footers not rendering properly. - Fixed a memory leak.

6.10.4: - Improved the diagnostic report page UI to further breakdown Engine vs Enhanced error codes such as Airbag, TPMS, etc. - Fixed a communication error that could occur with both KWP and ISO-9141 protocol vehicles. - Some minor bluetooth tweaks/fixes. - Fixed a bug in the main tab bar that could cause poor performance/choppy UI.

6.10.3: - More speed improvements and background scan tweaks! - Fixed a crash that could occur if you deleted the last vehicle in a really long list of vehicles, such that the newly selected vehicle was off the current vehicle menu page. - Several minor Bluetooth fixes.

6.10.2: - Speed Improvements! - Fixed a bug that could cause the main tab bar (and sometimes scan page footer) to load incorrectly. - Fixed a crash that could occur if you deleted all of your vehicles and tapped on certain features.

6.10.1 - Fixed several memory leaks - Fixed 2 crashes

6.10.0: - Further improvements to background scans. - The vehicles menu will now auto-scroll to your selected vehicle. - Improved detection of bluetooth communication issues that may occur due to radio congestion (typically due to lots of paired/active bluetooth devices). - Improved communication speed on older, non-CAN vehicles. - Fixed an issue that could cause logbook/timeline to load indefinitely when your vehicles failed to load due to a spotty network connection - Fixed an issue that could allow users to input absurdly high mileage values (99+ million). - Fixed several rare issues that could cause the app to launch into a black/blurred screen, especially on older devices. - Fixed several issues with scrolling/panning behavior around buttons. - Fixed some minor issues with biometric authentication. - Fixed an issue where selected issues were not saving when scheduling an appointment