Age Rating
MID WiFi Screenshots
About MID WiFi
Marine Instrument Display WiFi allows you to create/follow/transfer routes, track your path, control autopilot, receive/store/forward NMEA0183 data over WiFi and see AIS targets on the map. Send/receive data through iCloud (e.g. remote anchor alarm).
MID WiFi also features the world's first autopilot remote controller app for Apple Watch.
More information at www.veerasolutions.com/midwifi.
Try "MID WiFi (Free)" now!
FEATURES
- Compass Heading (mag/true) (HDG)
- Clock (utc/local) (CLK)
* Course Over Ground (COG)
* Speed Over Ground (SOG)
* Average SOG (ASOG)
* Maximum SOG (MSOG)
* Trip Distance (TRIP)
* Trip Time (TIME)
* Countdown Timer (CDT)
* Distance to Line (DTL)
* Time to Line (TTL)
* Barometric Pressure (BPR) (NMEA or iPhone6->)
* Bearing to Waypoint (BTW)
* Distance to Waypoint (DTW)
* Time to Waypoint (TTG)
* Cross Track Error (XTE)
* Velocity Made Good to Waypoint (VMGwpt)
* Heeling (HLG)
* Position
** Apparent Wind Angle and Speed (AWA, AWS)
** True Wind Angle and Speed (TWA, TWS)
** Maximum Apparent/True Wind Speed (MAWS, MTWS)
** True Wind Direction (TWD)
** Velocity Made Good to Wind (VMGwnd)
** Boat Speed (SPD)
** Maximum Boat Speed (MSPD)
** Depth (DPT)
** Air and Sea Temperatures (AIR, SEA)
** Predicted Boat Speed (PSPD)
** Boat Speed to Predicted Boat Speed Ratio (SPR)
** Revolutions Per Minute (Engine/Shaft) (RPM)
** Propeller Pitch (PRP)
** NoLand Eng. Analog Values (EAV1-5)
** TackTick FFP1-4
** Rate of Turn (ROT)
** Fluid Levels (TANKS)
* = Internal GPS or NMEA-WiFi bridge required
** = NMEA-WiFi bridge required (e.g. Vesper Marine XB-8000 and WatchMate Vision, Simrad GoFree WIFI-1, RS232-WiFi, Digital Yacht iAIS/WLN10, ShipModul MiniPlex-2/3Wi, Pilotstech PilotPlug, iMux, Ockam LANbridge)
WIND VIEW
- Shows Apparent and True Wind Angles simultaneously
- Size of the blue sector indicates the variation in wind direction
- Red dot shows the BTW
MAP VIEW
- AIS targets (**
- Create and follow routes
- Transfer routes on NMEA
- Create and replay tracks
- Autopilot control (Raymarine, requires MiniPlex-3Wi)
- Share the tracks by email (GPX, NMEA)
- Access stored NMEA data via iTunes File Sharing
ALARMS
- Depth (Deep, Shallow)
- Anchor (Deep, Shallow, Distance)
- Wind (AWA/TWA/AWS/TWS High/Low, TWD Shift)
HOW TO USE
- Tap the SET to enter the Settings page
- Tap the value of any field to cycle through the color modes
- Tap/swipe the title of any field (such as TIME) to select the data to the field
- Tap a unit to cycle through the unit modes
- Tap the unit (°) of the heeling (HLG) to calibrate (zero angle)
- Press the value of any field at least two seconds to reset the TIME, ASOG, MSOG and TRIP
- Rename a route or a track by tapping the name of it
- Use IP address 255.255.255.255 for the UDP broadcast/multicast. The port for Simrad GoFree discovery is 2050 or 2052, 5000-5010 are for Ockam LANbridge and 55554 for SailTimer Wind Vane.
- Use 127.0.0.1 and port 55554 for SailTimer Wind Instrument
- NMEA0183 data can be forwarded as UDP multicast to other devices
- The trip time runs while moving (SOG > 0)
- The COG is shown while moving (SOG > 0) (internal GPS)
COUNTDOWN TIMER
- Configure the start time (1 - 30 minutes) by touching the SET to enter the Settings view
- Start/sync the timer by touching the "sync"
- Stop the timer by touching the "sync" at least two seconds
- The timer beeps every minute and when 50, 40, 30, 20, 10, 5, 4, 3, 2, 1, 0 second(s) are remaining
CALIBRATION
1. The back cover must be faced forward accurately in order to get the correct compass heading.
2. Mount the iPhone/iPad securely and make sure it cannot move accidentally to ANY direction.
3. Tap the unit field (°) of the heeling (HLG). HLG is set to zero and the heading shows the correct value.
Continued use of GPS running in the background can dramatically decrease battery life.
MID WiFi also features the world's first autopilot remote controller app for Apple Watch.
More information at www.veerasolutions.com/midwifi.
Try "MID WiFi (Free)" now!
FEATURES
- Compass Heading (mag/true) (HDG)
- Clock (utc/local) (CLK)
* Course Over Ground (COG)
* Speed Over Ground (SOG)
* Average SOG (ASOG)
* Maximum SOG (MSOG)
* Trip Distance (TRIP)
* Trip Time (TIME)
* Countdown Timer (CDT)
* Distance to Line (DTL)
* Time to Line (TTL)
* Barometric Pressure (BPR) (NMEA or iPhone6->)
* Bearing to Waypoint (BTW)
* Distance to Waypoint (DTW)
* Time to Waypoint (TTG)
* Cross Track Error (XTE)
* Velocity Made Good to Waypoint (VMGwpt)
* Heeling (HLG)
* Position
** Apparent Wind Angle and Speed (AWA, AWS)
** True Wind Angle and Speed (TWA, TWS)
** Maximum Apparent/True Wind Speed (MAWS, MTWS)
** True Wind Direction (TWD)
** Velocity Made Good to Wind (VMGwnd)
** Boat Speed (SPD)
** Maximum Boat Speed (MSPD)
** Depth (DPT)
** Air and Sea Temperatures (AIR, SEA)
** Predicted Boat Speed (PSPD)
** Boat Speed to Predicted Boat Speed Ratio (SPR)
** Revolutions Per Minute (Engine/Shaft) (RPM)
** Propeller Pitch (PRP)
** NoLand Eng. Analog Values (EAV1-5)
** TackTick FFP1-4
** Rate of Turn (ROT)
** Fluid Levels (TANKS)
* = Internal GPS or NMEA-WiFi bridge required
** = NMEA-WiFi bridge required (e.g. Vesper Marine XB-8000 and WatchMate Vision, Simrad GoFree WIFI-1, RS232-WiFi, Digital Yacht iAIS/WLN10, ShipModul MiniPlex-2/3Wi, Pilotstech PilotPlug, iMux, Ockam LANbridge)
WIND VIEW
- Shows Apparent and True Wind Angles simultaneously
- Size of the blue sector indicates the variation in wind direction
- Red dot shows the BTW
MAP VIEW
- AIS targets (**
- Create and follow routes
- Transfer routes on NMEA
- Create and replay tracks
- Autopilot control (Raymarine, requires MiniPlex-3Wi)
- Share the tracks by email (GPX, NMEA)
- Access stored NMEA data via iTunes File Sharing
ALARMS
- Depth (Deep, Shallow)
- Anchor (Deep, Shallow, Distance)
- Wind (AWA/TWA/AWS/TWS High/Low, TWD Shift)
HOW TO USE
- Tap the SET to enter the Settings page
- Tap the value of any field to cycle through the color modes
- Tap/swipe the title of any field (such as TIME) to select the data to the field
- Tap a unit to cycle through the unit modes
- Tap the unit (°) of the heeling (HLG) to calibrate (zero angle)
- Press the value of any field at least two seconds to reset the TIME, ASOG, MSOG and TRIP
- Rename a route or a track by tapping the name of it
- Use IP address 255.255.255.255 for the UDP broadcast/multicast. The port for Simrad GoFree discovery is 2050 or 2052, 5000-5010 are for Ockam LANbridge and 55554 for SailTimer Wind Vane.
- Use 127.0.0.1 and port 55554 for SailTimer Wind Instrument
- NMEA0183 data can be forwarded as UDP multicast to other devices
- The trip time runs while moving (SOG > 0)
- The COG is shown while moving (SOG > 0) (internal GPS)
COUNTDOWN TIMER
- Configure the start time (1 - 30 minutes) by touching the SET to enter the Settings view
- Start/sync the timer by touching the "sync"
- Stop the timer by touching the "sync" at least two seconds
- The timer beeps every minute and when 50, 40, 30, 20, 10, 5, 4, 3, 2, 1, 0 second(s) are remaining
CALIBRATION
1. The back cover must be faced forward accurately in order to get the correct compass heading.
2. Mount the iPhone/iPad securely and make sure it cannot move accidentally to ANY direction.
3. Tap the unit field (°) of the heeling (HLG). HLG is set to zero and the heading shows the correct value.
Continued use of GPS running in the background can dramatically decrease battery life.
Show More
Was ist neu in der neuesten Version 4.4
Last updated on Aug 19, 2019
Alte Versionen
Bug fixes (GUI)
Show More
Version History
4.4
Aug 19, 2019
Bug fixes (GUI)
4.3
Jan 13, 2019
iPhone X, XS, XR improvements
4.1
Jul 10, 2018
Minor bug fixes
4.0
Sep 23, 2016
- iOS 10 and WatchOS 3 compatibility
- Double taps replaced with touch and hold (Watch)
- Double taps replaced with touch and hold (Watch)
3.12
Aug 17, 2016
Version 3.12
- Bug fixes (AIS - Rate Of Turn)
Version 3.11
- Bug fixes
Version 3.10
- Black text / white background for Map View
- Bug fixes
Version 3.9
- Select HDG or COG for the boat symbol on the map with a tap
- Change readings with a tap (forward) or a right swipe (reverse)
- Support for ShipModul MXPGN sentence (N2K PGN Fluid Level 127505)
- Bug fixes (AIS - Rate Of Turn)
Version 3.11
- Bug fixes
Version 3.10
- Black text / white background for Map View
- Bug fixes
Version 3.9
- Select HDG or COG for the boat symbol on the map with a tap
- Change readings with a tap (forward) or a right swipe (reverse)
- Support for ShipModul MXPGN sentence (N2K PGN Fluid Level 127505)
3.11
Aug 9, 2016
Version 3.11
- Bug fixes
Version 3.10
- Black text / white background for Map View
- Bug fixes
Version 3.9
- Select HDG or COG for the boat symbol on the map with a tap
- Change readings with a tap (forward) or a right swipe (reverse)
- Support for ShipModul MXPGN sentence (N2K PGN Fluid Level 127505)
Version 3.8
- Wind vector (Map View)
- Support for SailTimer PSTW sentence
- Bug fixes
Version 3.10
- Black text / white background for Map View
- Bug fixes
Version 3.9
- Select HDG or COG for the boat symbol on the map with a tap
- Change readings with a tap (forward) or a right swipe (reverse)
- Support for ShipModul MXPGN sentence (N2K PGN Fluid Level 127505)
Version 3.8
- Wind vector (Map View)
- Support for SailTimer PSTW sentence
3.10
Aug 5, 2016
Version 3.10
- Black text / white background for Map View
- Bug fixes
Version 3.9
- Select HDG or COG for the boat symbol on the map with a tap
- Change readings with a tap (forward) or a right swipe (reverse)
- Support for ShipModul MXPGN sentence (N2K PGN Fluid Level 127505)
Version 3.8
- Wind vector (Map View)
- Support for SailTimer PSTW sentence
- Black text / white background for Map View
- Bug fixes
Version 3.9
- Select HDG or COG for the boat symbol on the map with a tap
- Change readings with a tap (forward) or a right swipe (reverse)
- Support for ShipModul MXPGN sentence (N2K PGN Fluid Level 127505)
Version 3.8
- Wind vector (Map View)
- Support for SailTimer PSTW sentence
3.9
Jul 6, 2016
Version 3.9
- Select HDG or COG for the boat symbol on the map with a tap
- Change readings with a tap (forward) or a right swipe (reverse)
- Support for ShipModul MXPGN sentence (N2K PGN Fluid Level 127505)
Version 3.8
- Wind vector (Map View)
- Support for SailTimer PSTW sentence
Version 3.7
- Support for the latest SailTimer API
Version 3.6
- Bug fixes
Version 3.4
- Distance, TTG and ETA for each waypoint on the map
- Select HDG or COG for the boat symbol on the map with a tap
- Change readings with a tap (forward) or a right swipe (reverse)
- Support for ShipModul MXPGN sentence (N2K PGN Fluid Level 127505)
Version 3.8
- Wind vector (Map View)
- Support for SailTimer PSTW sentence
Version 3.7
- Support for the latest SailTimer API
Version 3.6
- Bug fixes
Version 3.4
- Distance, TTG and ETA for each waypoint on the map
3.8.1
Jun 24, 2016
Version 3.8
- Wind vector (Map View)
- Support for SailTimer PSTW sentence
Version 3.7
- Support for the latest SailTimer API
Version 3.6
- Bug fixes
Version 3.4
- Distance, TTG and ETA for each waypoint on the map
Version 3.3
- Autopilot view for iPhone
- Wind, AutoTack, Response commands
- Wind vector (Map View)
- Support for SailTimer PSTW sentence
Version 3.7
- Support for the latest SailTimer API
Version 3.6
- Bug fixes
Version 3.4
- Distance, TTG and ETA for each waypoint on the map
Version 3.3
- Autopilot view for iPhone
- Wind, AutoTack, Response commands
3.7
Jun 17, 2016
Version 3.7
- Support for the latest SailTimer API
Version 3.6
- Bug fixes
Version 3.4
- Distance, TTG and ETA for each waypoint on the map
Version 3.3
- Autopilot view for iPhone
- Wind, AutoTack, Response commands
Version 3.2
- Wind Speed Calibration
- Support for the latest SailTimer API
Version 3.6
- Bug fixes
Version 3.4
- Distance, TTG and ETA for each waypoint on the map
Version 3.3
- Autopilot view for iPhone
- Wind, AutoTack, Response commands
Version 3.2
- Wind Speed Calibration
3.6
Jun 10, 2016
Version 3.6
- Bug fixes
- Incompatible with the current SailTimer API. Will be fixed asap.
Version 3.4
- Distance, TTG and ETA for each waypoint on the map
Version 3.3
- Autopilot view for iPhone
- Wind, AutoTack, Response commands
Version 3.2
- Wind Speed Calibration
- Bug fixes
- Incompatible with the current SailTimer API. Will be fixed asap.
Version 3.4
- Distance, TTG and ETA for each waypoint on the map
Version 3.3
- Autopilot view for iPhone
- Wind, AutoTack, Response commands
Version 3.2
- Wind Speed Calibration
3.4.2
Jun 7, 2016
Version 3.4
- Distance, TTG and ETA for each waypoint on the map
Version 3.3
- Autopilot view for iPhone
- Wind, AutoTack, Response commands
Version 3.2
- Wind Speed Calibration
Version 3.1
- Favorites list for AIS targets (Add / Remove, Show All / Favorites Only)
- Send/receive data through iCloud (e.g. remote anchor alarm)
- iPad Pro Map View bug fixed
Version 3.0
- Track replay (play, pause, forward/rewind, all NMEA data including AIS targets)
(Tracks created with Version 3.0 and later)
- Switch between Open Sea Map and satellite image with a long touch of (+)
- Robustness improvements and bug fixes (routes, goto waypoint, tracks, NMEA)
Version 2.11
- Caching for Open Sea Map
- Switch between Open Sea Map and satellite images by touching (+) button
- Goto to Waypoint (long touch on Map view)
Version 2.10
- HDG and SOG on the status bar on Watch
- Heading vector added (Map view)
- Wind view on iPhone 6 Plus fixed
Version 2.9
- Compass scale added to Wind view
- Split view support for iPad allows simultaneous use of MID WiFi and another navigation app
Version 2.8
Introducing the world's first autopilot remote controller app for Apple Watch.
(Tested with Raymarine SPX-5 wheel pilot with ShipModul MiniPlex-3Wi)
- Distance, TTG and ETA for each waypoint on the map
Version 3.3
- Autopilot view for iPhone
- Wind, AutoTack, Response commands
Version 3.2
- Wind Speed Calibration
Version 3.1
- Favorites list for AIS targets (Add / Remove, Show All / Favorites Only)
- Send/receive data through iCloud (e.g. remote anchor alarm)
- iPad Pro Map View bug fixed
Version 3.0
- Track replay (play, pause, forward/rewind, all NMEA data including AIS targets)
(Tracks created with Version 3.0 and later)
- Switch between Open Sea Map and satellite image with a long touch of (+)
- Robustness improvements and bug fixes (routes, goto waypoint, tracks, NMEA)
Version 2.11
- Caching for Open Sea Map
- Switch between Open Sea Map and satellite images by touching (+) button
- Goto to Waypoint (long touch on Map view)
Version 2.10
- HDG and SOG on the status bar on Watch
- Heading vector added (Map view)
- Wind view on iPhone 6 Plus fixed
Version 2.9
- Compass scale added to Wind view
- Split view support for iPad allows simultaneous use of MID WiFi and another navigation app
Version 2.8
Introducing the world's first autopilot remote controller app for Apple Watch.
(Tested with Raymarine SPX-5 wheel pilot with ShipModul MiniPlex-3Wi)
3.3.0
Jun 2, 2016
Version 3.3
- Autopilot view for iPhone
- Wind, AutoTack, Response commands
Version 3.2
- Wind Speed Calibration
Version 3.1
- Favorites list for AIS targets (Add / Remove, Show All / Favorites Only)
- Send/receive data through iCloud (e.g. remote anchor alarm)
- iPad Pro Map View bug fixed
Version 3.0
- Track replay (play, pause, forward/rewind, all NMEA data including AIS targets)
(Tracks created with Version 3.0 and later)
- Switch between Open Sea Map and satellite image with a long touch of (+)
- Robustness improvements and bug fixes (routes, goto waypoint, tracks, NMEA)
Version 2.11
- Caching for Open Sea Map
- Switch between Open Sea Map and satellite images by touching (+) button
- Goto to Waypoint (long touch on Map view)
Version 2.10
- HDG and SOG on the status bar on Watch
- Heading vector added (Map view)
- Wind view on iPhone 6 Plus fixed
Version 2.9
- Compass scale added to Wind view
- Split view support for iPad allows simultaneous use of MID WiFi and another navigation app
Version 2.8
Introducing the world's first autopilot remote controller app for Apple Watch.
(Tested with Raymarine SPX-5 wheel pilot with ShipModul MiniPlex-3Wi)
- Autopilot view for iPhone
- Wind, AutoTack, Response commands
Version 3.2
- Wind Speed Calibration
Version 3.1
- Favorites list for AIS targets (Add / Remove, Show All / Favorites Only)
- Send/receive data through iCloud (e.g. remote anchor alarm)
- iPad Pro Map View bug fixed
Version 3.0
- Track replay (play, pause, forward/rewind, all NMEA data including AIS targets)
(Tracks created with Version 3.0 and later)
- Switch between Open Sea Map and satellite image with a long touch of (+)
- Robustness improvements and bug fixes (routes, goto waypoint, tracks, NMEA)
Version 2.11
- Caching for Open Sea Map
- Switch between Open Sea Map and satellite images by touching (+) button
- Goto to Waypoint (long touch on Map view)
Version 2.10
- HDG and SOG on the status bar on Watch
- Heading vector added (Map view)
- Wind view on iPhone 6 Plus fixed
Version 2.9
- Compass scale added to Wind view
- Split view support for iPad allows simultaneous use of MID WiFi and another navigation app
Version 2.8
Introducing the world's first autopilot remote controller app for Apple Watch.
(Tested with Raymarine SPX-5 wheel pilot with ShipModul MiniPlex-3Wi)
3.2.2
May 27, 2016
Version 3.2
- Wind Speed Calibration
Version 3.1
- Favorites list for AIS targets (Add / Remove, Show All / Favorites Only)
- Send/receive data through iCloud (e.g. remote anchor alarm)
- iPad Pro Map View bug fixed
Version 3.0
- Track replay (play, pause, forward/rewind, all NMEA data including AIS targets)
(Tracks created with Version 3.0 and later)
- Switch between Open Sea Map and satellite image with a long touch of (+)
- Robustness improvements and bug fixes (routes, goto waypoint, tracks, NMEA)
Version 2.11
- Caching for Open Sea Map
- Switch between Open Sea Map and satellite images by touching (+) button
- Goto to Waypoint (long touch on Map view)
Version 2.10
- HDG and SOG on the status bar on Watch
- Heading vector added (Map view)
- Wind view on iPhone 6 Plus fixed
Version 2.9
- Compass scale added to Wind view
- Split view support for iPad allows simultaneous use of MID WiFi and another navigation app
Version 2.8
Introducing the world's first autopilot remote controller app for Apple Watch.
(Tested with Raymarine SPX-5 wheel pilot with ShipModul MiniPlex-3Wi)
- Wind Speed Calibration
Version 3.1
- Favorites list for AIS targets (Add / Remove, Show All / Favorites Only)
- Send/receive data through iCloud (e.g. remote anchor alarm)
- iPad Pro Map View bug fixed
Version 3.0
- Track replay (play, pause, forward/rewind, all NMEA data including AIS targets)
(Tracks created with Version 3.0 and later)
- Switch between Open Sea Map and satellite image with a long touch of (+)
- Robustness improvements and bug fixes (routes, goto waypoint, tracks, NMEA)
Version 2.11
- Caching for Open Sea Map
- Switch between Open Sea Map and satellite images by touching (+) button
- Goto to Waypoint (long touch on Map view)
Version 2.10
- HDG and SOG on the status bar on Watch
- Heading vector added (Map view)
- Wind view on iPhone 6 Plus fixed
Version 2.9
- Compass scale added to Wind view
- Split view support for iPad allows simultaneous use of MID WiFi and another navigation app
Version 2.8
Introducing the world's first autopilot remote controller app for Apple Watch.
(Tested with Raymarine SPX-5 wheel pilot with ShipModul MiniPlex-3Wi)
3.1.2
May 19, 2016
Version 3.1
- Favorites list for AIS targets (Add / Remove, Show All / Favorites Only)
- Send/receive data through iCloud (e.g. remote anchor alarm)
- iPad Pro Map View bug fixed
Version 3.0
- Track replay (play, pause, forward/rewind, all NMEA data including AIS targets)
(Tracks created with Version 3.0 and later)
- Switch between Open Sea Map and satellite image with a long touch of (+)
- Robustness improvements and bug fixes (routes, goto waypoint, tracks, NMEA)
Version 2.11
- Caching for Open Sea Map
- Switch between Open Sea Map and satellite images by touching (+) button
- Goto to Waypoint (long touch on Map view)
Version 2.10
- HDG and SOG on the status bar on Watch
- Heading vector added (Map view)
- Wind view on iPhone 6 Plus fixed
Version 2.9
- Compass scale added to Wind view
- Split view support for iPad allows simultaneous use of MID WiFi and another navigation app
Version 2.8
Introducing the world's first autopilot remote controller app for Apple Watch.
(Tested with Raymarine SPX-5 wheel pilot with ShipModul MiniPlex-3Wi)
- Favorites list for AIS targets (Add / Remove, Show All / Favorites Only)
- Send/receive data through iCloud (e.g. remote anchor alarm)
- iPad Pro Map View bug fixed
Version 3.0
- Track replay (play, pause, forward/rewind, all NMEA data including AIS targets)
(Tracks created with Version 3.0 and later)
- Switch between Open Sea Map and satellite image with a long touch of (+)
- Robustness improvements and bug fixes (routes, goto waypoint, tracks, NMEA)
Version 2.11
- Caching for Open Sea Map
- Switch between Open Sea Map and satellite images by touching (+) button
- Goto to Waypoint (long touch on Map view)
Version 2.10
- HDG and SOG on the status bar on Watch
- Heading vector added (Map view)
- Wind view on iPhone 6 Plus fixed
Version 2.9
- Compass scale added to Wind view
- Split view support for iPad allows simultaneous use of MID WiFi and another navigation app
Version 2.8
Introducing the world's first autopilot remote controller app for Apple Watch.
(Tested with Raymarine SPX-5 wheel pilot with ShipModul MiniPlex-3Wi)
3.0.0
May 16, 2016
Version 3.0
- Track replay (play, pause, forward/rewind, all NMEA data including AIS targets)
(Tracks created with Version 3.0 and later)
- Switch between Open Sea Map and satellite image with a long touch of (+)
- Robustness improvements and bug fixes (routes, goto waypoint, tracks, NMEA)
Version 2.11
- Caching for Open Sea Map
- Switch between Open Sea Map and satellite images by touching (+) button
- Goto to Waypoint (long touch on Map view)
Version 2.10
- HDG and SOG on the status bar on Watch
- Heading vector added (Map view)
- Wind view on iPhone 6 Plus fixed
Version 2.9
- Compass scale added to Wind view
- Split view support for iPad allows simultaneous use of MID WiFi and another navigation app
Version 2.8
Introducing the world's first autopilot remote controller app for Apple Watch.
(Tested with Raymarine SPX-5 wheel pilot with ShipModul MiniPlex-3Wi)
- Track replay (play, pause, forward/rewind, all NMEA data including AIS targets)
(Tracks created with Version 3.0 and later)
- Switch between Open Sea Map and satellite image with a long touch of (+)
- Robustness improvements and bug fixes (routes, goto waypoint, tracks, NMEA)
Version 2.11
- Caching for Open Sea Map
- Switch between Open Sea Map and satellite images by touching (+) button
- Goto to Waypoint (long touch on Map view)
Version 2.10
- HDG and SOG on the status bar on Watch
- Heading vector added (Map view)
- Wind view on iPhone 6 Plus fixed
Version 2.9
- Compass scale added to Wind view
- Split view support for iPad allows simultaneous use of MID WiFi and another navigation app
Version 2.8
Introducing the world's first autopilot remote controller app for Apple Watch.
(Tested with Raymarine SPX-5 wheel pilot with ShipModul MiniPlex-3Wi)
2.11.0
May 9, 2016
Version 2.11
- Caching for Open Sea Map
- Switch between Open Sea Map and satellite images by touching (+) button
- Goto to Waypoint (long touch on Map view)
Version 2.10
- HDG and SOG on the status bar on Watch
- Heading vector added (Map view)
- Wind view on iPhone 6 Plus fixed
Version 2.9
- Compass scale added to Wind view
- Split view support for iPad allows simultaneous use of MID WiFi and another navigation app
Version 2.8
Introducing the world's first autopilot remote controller app for Apple Watch.
(Tested with Raymarine SPX-5 wheel pilot with ShipModul MiniPlex-3Wi)
- Caching for Open Sea Map
- Switch between Open Sea Map and satellite images by touching (+) button
- Goto to Waypoint (long touch on Map view)
Version 2.10
- HDG and SOG on the status bar on Watch
- Heading vector added (Map view)
- Wind view on iPhone 6 Plus fixed
Version 2.9
- Compass scale added to Wind view
- Split view support for iPad allows simultaneous use of MID WiFi and another navigation app
Version 2.8
Introducing the world's first autopilot remote controller app for Apple Watch.
(Tested with Raymarine SPX-5 wheel pilot with ShipModul MiniPlex-3Wi)
2.10.0
Apr 29, 2016
- HDG and SOG on the status bar on Watch
- Heading vector added (Map view)
- Wind view on iPhone 6 Plus fixed
- Heading vector added (Map view)
- Wind view on iPhone 6 Plus fixed
2.9.1
Apr 26, 2016
Version 2.9
- Compass scale added to Wind view (shows heading, true wind direction and bearing to waypoint)
- Alarms now played on Watch
- Split view support for iPad allows simultaneous use of MID WiFi and another navigation app
Version 2.8
Introducing the world's first autopilot remote controller app for Apple Watch.
(Tested with Raymarine SPX-5 wheel pilot with ShipModul MiniPlex-3Wi)
Few minor bugs fixed as well.
Version 2.7
- SailTimer Wind Instrument support
- NMEA and GUI bug fixes
- Robustness improvements
- Compass scale added to Wind view (shows heading, true wind direction and bearing to waypoint)
- Alarms now played on Watch
- Split view support for iPad allows simultaneous use of MID WiFi and another navigation app
Version 2.8
Introducing the world's first autopilot remote controller app for Apple Watch.
(Tested with Raymarine SPX-5 wheel pilot with ShipModul MiniPlex-3Wi)
Few minor bugs fixed as well.
Version 2.7
- SailTimer Wind Instrument support
- NMEA and GUI bug fixes
- Robustness improvements
2.8.0
Apr 18, 2016
Version 2.8
Introducing the world's first autopilot remote controller app for Apple Watch.
(Tested with Raymarine SPX-5 wheel pilot with ShipModul MiniPlex-3Wi)
Few minor bugs fixed as well.
Version 2.7
- SailTimer Wind Instrument support
- NMEA and GUI bug fixes
- Robustness improvements
Version 2.2
- Improved Pilotstech PilotPlug support
- Rate of Turn (ROT)
- Autopilot control (APB, RMB sentences)
- Bug fixes
- User's Guide available at www.veerasolutions.com
Version 2.1
- Create and follow routes
- Transfer routes on NMEA to a chartplotter
- Barometer (iPhone6)
- Map view improved for navigation
- iPhone 6 Plus support
Introducing the world's first autopilot remote controller app for Apple Watch.
(Tested with Raymarine SPX-5 wheel pilot with ShipModul MiniPlex-3Wi)
Few minor bugs fixed as well.
Version 2.7
- SailTimer Wind Instrument support
- NMEA and GUI bug fixes
- Robustness improvements
Version 2.2
- Improved Pilotstech PilotPlug support
- Rate of Turn (ROT)
- Autopilot control (APB, RMB sentences)
- Bug fixes
- User's Guide available at www.veerasolutions.com
Version 2.1
- Create and follow routes
- Transfer routes on NMEA to a chartplotter
- Barometer (iPhone6)
- Map view improved for navigation
- iPhone 6 Plus support
2.7.0
Apr 4, 2016
Version 2.7
- SailTimer Wind Instrument support
- NMEA and GUI bug fixes
- Robustness improvements
Version 2.2
- Improved Pilotstech PilotPlug support
- Rate of Turn (ROT)
- Autopilot control (APB, RMB sentences)
- Bug fixes
- User's Guide available at www.veerasolutions.com
Version 2.1
- Create and follow routes
- Transfer routes on NMEA to a chartplotter
- Barometer (iPhone6)
- Map view improved for navigation
- iPhone 6 Plus support
- SailTimer Wind Instrument support
- NMEA and GUI bug fixes
- Robustness improvements
Version 2.2
- Improved Pilotstech PilotPlug support
- Rate of Turn (ROT)
- Autopilot control (APB, RMB sentences)
- Bug fixes
- User's Guide available at www.veerasolutions.com
Version 2.1
- Create and follow routes
- Transfer routes on NMEA to a chartplotter
- Barometer (iPhone6)
- Map view improved for navigation
- iPhone 6 Plus support
2.2.0
Mar 28, 2016
Version 2.2
- Improved Pilotstech PilotPlug support
- Rate of Turn (ROT)
- Autopilot control (APB, RMB sentences)
- Bug fixes
- User's Guide available at www.veerasolutions.com
Version 2.1
- Create and follow routes
- Transfer routes on NMEA to a chartplotter
- Barometer (iPhone6)
- Map view improved for navigation
- iPhone 6 Plus support
- Improved Pilotstech PilotPlug support
- Rate of Turn (ROT)
- Autopilot control (APB, RMB sentences)
- Bug fixes
- User's Guide available at www.veerasolutions.com
Version 2.1
- Create and follow routes
- Transfer routes on NMEA to a chartplotter
- Barometer (iPhone6)
- Map view improved for navigation
- iPhone 6 Plus support
2.1.0
Mar 11, 2016
- Create and follow routes
- Transfer routes on NMEA to a chartplotter
- Barometer (iPhone6)
- Map view improved for navigation
- iPhone 6 Plus support
- Bug fixes
- Transfer routes on NMEA to a chartplotter
- Barometer (iPhone6)
- Map view improved for navigation
- iPhone 6 Plus support
- Bug fixes
1.61.1
Oct 28, 2015
Configurable calibration value for the boat speed (SPD)
1.60.1
Oct 12, 2015
Bug fixes
- connectivity issues at high data rates
- crashes related to the tracks (save and send)
- connectivity issues at high data rates
- crashes related to the tracks (save and send)
MID WiFi Preis
Heute:
24,99 €
Am günstigsten:
24,99 €
Am teuersten:
27,99 €
MID WiFi FAQ
Klicken Sie hier, um zu erfahren, wie Sie MID WiFi in eingeschränkten Ländern oder Regionen herunterladen können.
Überprüfen Sie die folgende Liste, um die Mindestanforderungen von MID WiFi zu sehen.
iPhone
Erfordert iOS 8.0 oder neuer.
iPad
Erfordert iPadOS 8.0 oder neuer.
Apple Watch
Erfordert watchOS 3.0 oder neuer.
iPod touch
Erfordert iOS 8.0 oder neuer.
MID WiFi unterstützt Englisch