ISCO FlowCalc
Free
2.0.3for iPhone
Age Rating
ISCO FlowCalc Captures d'écran
About ISCO FlowCalc
This app calculates flow rates in open, non-full channels and pipes. Use this app to spot-check the performance of installed flow monitoring systems, or verify that newly installed flow meters are configured correctly. This app includes level-to-flow rate calculations for primary devices and area-velocity flow rate calculations for a variety of conduit shapes.
You can display flow rate units as cubic feet per second (cfs), gallons per minute (gpm), or million gallons per days (mgd). By changing the app settings to SI units, you can display flow rates as liters per second (lps) or cubic meters per hour (m3h).
Level-to-Flow Rate Calculations for Primary Devices
Enter the head height using convenient sliders to calculate flow rates in the following primary devices:
• Parshall flumes from 1 inch to 12 feet (0.0254 to 3.66 m)
• Palmer-Bowlus flumes from 4 to 30 inches (0.102 to 0.762 m)
• V-notch weirs: 22.5, 30, 45, 60, 90, 120 degrees
• Rectangular weirs with end contractions from 1 to 10 feet (0.3 to 3.0 m)
• Rectangular weirs without end contractions from 1 to 10 feet (0.3 to 3.0 m)
Area-velocity Flow Rate Calculations
Enter the head height, velocity, and dimensions to calculate flow rates in these channel shapes:
• Round pipes to 30 feet (10 m) in diameter
• U-shaped channels to 30 feet (10 m) wide
• Rectangular channels to 30 feet (10 m) wide
• Trapezoidal channels to 30 feet (10 m) wide
• Elliptical pipes to 30 feet (10 m) wide
Save your frequently-used calculations as Favorites. This handy feature lets you quickly access calculations by site name and map your location when GPS data is available.
All flow rate calculations are based on equations published in the ISCO Open Channel Flow Measurement Handbook, Eighth Edition. This definitive reference book, published by Teledyne ISCO, is widely used by water and wastewater monitoring professionals.
Disclaimer: The equations used in this calculator were obtained from sources deemed to be reliable. Neither Teledyne ISCO nor anyone acting on its behalf makes any warranty with respect to the accuracy, completeness, or usefulness of the app features. Teledyne ISCO shall not be held liable for any damages that arise from the use of this app.
You can display flow rate units as cubic feet per second (cfs), gallons per minute (gpm), or million gallons per days (mgd). By changing the app settings to SI units, you can display flow rates as liters per second (lps) or cubic meters per hour (m3h).
Level-to-Flow Rate Calculations for Primary Devices
Enter the head height using convenient sliders to calculate flow rates in the following primary devices:
• Parshall flumes from 1 inch to 12 feet (0.0254 to 3.66 m)
• Palmer-Bowlus flumes from 4 to 30 inches (0.102 to 0.762 m)
• V-notch weirs: 22.5, 30, 45, 60, 90, 120 degrees
• Rectangular weirs with end contractions from 1 to 10 feet (0.3 to 3.0 m)
• Rectangular weirs without end contractions from 1 to 10 feet (0.3 to 3.0 m)
Area-velocity Flow Rate Calculations
Enter the head height, velocity, and dimensions to calculate flow rates in these channel shapes:
• Round pipes to 30 feet (10 m) in diameter
• U-shaped channels to 30 feet (10 m) wide
• Rectangular channels to 30 feet (10 m) wide
• Trapezoidal channels to 30 feet (10 m) wide
• Elliptical pipes to 30 feet (10 m) wide
Save your frequently-used calculations as Favorites. This handy feature lets you quickly access calculations by site name and map your location when GPS data is available.
All flow rate calculations are based on equations published in the ISCO Open Channel Flow Measurement Handbook, Eighth Edition. This definitive reference book, published by Teledyne ISCO, is widely used by water and wastewater monitoring professionals.
Disclaimer: The equations used in this calculator were obtained from sources deemed to be reliable. Neither Teledyne ISCO nor anyone acting on its behalf makes any warranty with respect to the accuracy, completeness, or usefulness of the app features. Teledyne ISCO shall not be held liable for any damages that arise from the use of this app.
Show More
Quoi de neuf dans la dernière version 2.0.3
Last updated on May 29, 2020
Vieilles Versions
Improved registration process with better defaults and smoother entry.
Ensures email is configured before assisting the client in sending message to a customer service.
Ensures email is configured before assisting the client in sending message to a customer service.
Show More
Version History
2.0.3
May 29, 2020
Improved registration process with better defaults and smoother entry.
Ensures email is configured before assisting the client in sending message to a customer service.
Ensures email is configured before assisting the client in sending message to a customer service.
2.0.1
May 14, 2020
New look with same features for App re-release.
1.1.1
Dec 17, 2012
- Minor bug fixes
ISCO FlowCalc FAQ
Cliquez ici pour savoir comment télécharger ISCO FlowCalc dans un pays ou une région restreints.
Consultez la liste suivante pour voir les exigences minimales de ISCO FlowCalc.
iPhone
ISCO FlowCalc prend en charge English