NX Connect
Commissioning Application
Gratuit
3.2.11for iPhone, iPod touch
5.9
1 Ratings
Current Lighting Solutions, LLC
Developer
14,5 Mo
Size
Sep 14, 2023
Update Date
Utilities
Category
4+
Age Rating
Age Rating
NX Connect Captures d'écran
About NX Connect
NX Connect is a distributed room-based lighting controls solution.
For application spaces in need of a system that is simple, easy to install and code complaint, NX Connect is our mobile, app-based wireless controls system. NX Connect provides zonal control and commissioning of lighting systems. The NX Connect mobile app and wireless devices allow customers to zone lighting fixtures, saving installation time and expertise required to commission room-based lighting systems.
For application spaces in need of a system that is simple, easy to install and code complaint, NX Connect is our mobile, app-based wireless controls system. NX Connect provides zonal control and commissioning of lighting systems. The NX Connect mobile app and wireless devices allow customers to zone lighting fixtures, saving installation time and expertise required to commission room-based lighting systems.
Show More
Quoi de neuf dans la dernière version 3.2.11
Last updated on Sep 14, 2023
Vieilles Versions
This update includes the following new features:
- Support adding switches and sensors to multiple Zones in a Room
- Support WWD2-4 switch in dual dimmer switch personality
- Create up to six Zones in a Room for any hardware type
- Support multiple WA220/WA230 room controllers up to 6 relay outputs
- Support unlimited number of WWD2 switches in a Room
- More intuitive page layout and navigation for Zoning and Scenes
- Adds new Auto ON @ Background strategy for Occupancy (firmware update required)
- Adds new Low-End Trim setting for Dimming
- Apply custom names to zones, switches, and scenes within a Room
- Default channel selection for new Rooms is now Automatic
** Note that none of new features are not available for the WIT100 sensor
We've fixed the following issues to improve the stability of the App:
- Incorrect Daylighting behaviour when Occupancy feature is disabled
- Restarting phone Bluetooth after firmware upgrade no longer needed
- App occasionally crashes after certain Scene configurations are saved
- App occasionally crashes after removing ownership of a Room
- App crashes in rare cases when applying certain types of settings Profiles
- App crashes in rare cases when connecting to an older Room
- Occupancy enable/disable button occasionally freezes
- Back button to exit Room screen occasionally disappears
- Too many warnings shown when using the App with GPS enabled
- Devices aren't detected by app when using iOS 12
- Faster page loading after exiting a Room to main menu
- Faster response to errors in removing a switch/sensor from Room
- Minor issues with form length and format validations
- Minor color, layout, and alignment issues on some pages
- Support adding switches and sensors to multiple Zones in a Room
- Support WWD2-4 switch in dual dimmer switch personality
- Create up to six Zones in a Room for any hardware type
- Support multiple WA220/WA230 room controllers up to 6 relay outputs
- Support unlimited number of WWD2 switches in a Room
- More intuitive page layout and navigation for Zoning and Scenes
- Adds new Auto ON @ Background strategy for Occupancy (firmware update required)
- Adds new Low-End Trim setting for Dimming
- Apply custom names to zones, switches, and scenes within a Room
- Default channel selection for new Rooms is now Automatic
** Note that none of new features are not available for the WIT100 sensor
We've fixed the following issues to improve the stability of the App:
- Incorrect Daylighting behaviour when Occupancy feature is disabled
- Restarting phone Bluetooth after firmware upgrade no longer needed
- App occasionally crashes after certain Scene configurations are saved
- App occasionally crashes after removing ownership of a Room
- App crashes in rare cases when applying certain types of settings Profiles
- App crashes in rare cases when connecting to an older Room
- Occupancy enable/disable button occasionally freezes
- Back button to exit Room screen occasionally disappears
- Too many warnings shown when using the App with GPS enabled
- Devices aren't detected by app when using iOS 12
- Faster page loading after exiting a Room to main menu
- Faster response to errors in removing a switch/sensor from Room
- Minor issues with form length and format validations
- Minor color, layout, and alignment issues on some pages
Show More
Version History
3.2.11
Sep 14, 2023
This update includes the following new features:
- Support adding switches and sensors to multiple Zones in a Room
- Support WWD2-4 switch in dual dimmer switch personality
- Create up to six Zones in a Room for any hardware type
- Support multiple WA220/WA230 room controllers up to 6 relay outputs
- Support unlimited number of WWD2 switches in a Room
- More intuitive page layout and navigation for Zoning and Scenes
- Adds new Auto ON @ Background strategy for Occupancy (firmware update required)
- Adds new Low-End Trim setting for Dimming
- Apply custom names to zones, switches, and scenes within a Room
- Default channel selection for new Rooms is now Automatic
** Note that none of new features are not available for the WIT100 sensor
We've fixed the following issues to improve the stability of the App:
- Incorrect Daylighting behaviour when Occupancy feature is disabled
- Restarting phone Bluetooth after firmware upgrade no longer needed
- App occasionally crashes after certain Scene configurations are saved
- App occasionally crashes after removing ownership of a Room
- App crashes in rare cases when applying certain types of settings Profiles
- App crashes in rare cases when connecting to an older Room
- Occupancy enable/disable button occasionally freezes
- Back button to exit Room screen occasionally disappears
- Too many warnings shown when using the App with GPS enabled
- Devices aren't detected by app when using iOS 12
- Faster page loading after exiting a Room to main menu
- Faster response to errors in removing a switch/sensor from Room
- Minor issues with form length and format validations
- Minor color, layout, and alignment issues on some pages
- Support adding switches and sensors to multiple Zones in a Room
- Support WWD2-4 switch in dual dimmer switch personality
- Create up to six Zones in a Room for any hardware type
- Support multiple WA220/WA230 room controllers up to 6 relay outputs
- Support unlimited number of WWD2 switches in a Room
- More intuitive page layout and navigation for Zoning and Scenes
- Adds new Auto ON @ Background strategy for Occupancy (firmware update required)
- Adds new Low-End Trim setting for Dimming
- Apply custom names to zones, switches, and scenes within a Room
- Default channel selection for new Rooms is now Automatic
** Note that none of new features are not available for the WIT100 sensor
We've fixed the following issues to improve the stability of the App:
- Incorrect Daylighting behaviour when Occupancy feature is disabled
- Restarting phone Bluetooth after firmware upgrade no longer needed
- App occasionally crashes after certain Scene configurations are saved
- App occasionally crashes after removing ownership of a Room
- App crashes in rare cases when applying certain types of settings Profiles
- App crashes in rare cases when connecting to an older Room
- Occupancy enable/disable button occasionally freezes
- Back button to exit Room screen occasionally disappears
- Too many warnings shown when using the App with GPS enabled
- Devices aren't detected by app when using iOS 12
- Faster page loading after exiting a Room to main menu
- Faster response to errors in removing a switch/sensor from Room
- Minor issues with form length and format validations
- Minor color, layout, and alignment issues on some pages
3.0.14
Sep 20, 2022
NX Connect FAQ
Cliquez ici pour savoir comment télécharger NX Connect dans un pays ou une région restreints.
Consultez la liste suivante pour voir les exigences minimales de NX Connect.
iPhone
Nécessite iOS 12.0 ou version ultérieure.
iPod touch
Nécessite iOS 12.0 ou version ultérieure.
NX Connect prend en charge Anglais
