SmartHomeSec
Gratuit
2.24.1for iPhone, Apple Watch and more
Age Rating
SmartHomeSec Captures d'écran
About SmartHomeSec
Description:
With the Vesta SmartHomeSec application, you can manage your security system, video surveillance and control of home automation devices in your home. Reception and instant notifications of events, from the Automation / home automation section, you can control the home automation system (such as turning off the TV and viewing its consumption, turning lights on / off, heating, etc.), taking photos using the PIR cams, etc. DAHUA cameras can also be added in the same APP in a simple way, scanning the QR code of the device in question. Geofence is a Geolocation system that allows you to mark the detection range (100 meters and above) when entering or leaving the area, and apply scenarios or perform actions such as (arming, disarming the security system, turning the heating on or off, lights in a room, devices), or create reminders like "Arm the system" when you leave the geolocation zone.
Integration with Alexa and Google Home, to arm and disarm the system by voice commands, in addition to controlling home automation devices.
Characteristics:
• Instant alarm notifications with images.
• Real-time supervision of DAHUA cameras by P2P.
• Request images from PIRCAM detectors.
• Verification of panel events.
• Home automation control (Control of all your smart home devices).
• Arm the security panel remotely.
• Create scenarios (example: When entering the house, turn on the hall light and turn on the heat).
• Create rules (example: Auto arming of the system, automatic switch off of lights, auto regulation of the light level, turning lights on and off depending on the ambient lux, simulating the presence, etc.)
• Add users and privilege management.
• Management of several panels with the same user.
• Integration with Alexa and Google home.
• Free application.
Have you forgotten to arm your security system? Don’t worry. With SmartHomeSec, you can remotely control all of your home automation devices and the security system.
With the Vesta SmartHomeSec application, you can manage your security system, video surveillance and control of home automation devices in your home. Reception and instant notifications of events, from the Automation / home automation section, you can control the home automation system (such as turning off the TV and viewing its consumption, turning lights on / off, heating, etc.), taking photos using the PIR cams, etc. DAHUA cameras can also be added in the same APP in a simple way, scanning the QR code of the device in question. Geofence is a Geolocation system that allows you to mark the detection range (100 meters and above) when entering or leaving the area, and apply scenarios or perform actions such as (arming, disarming the security system, turning the heating on or off, lights in a room, devices), or create reminders like "Arm the system" when you leave the geolocation zone.
Integration with Alexa and Google Home, to arm and disarm the system by voice commands, in addition to controlling home automation devices.
Characteristics:
• Instant alarm notifications with images.
• Real-time supervision of DAHUA cameras by P2P.
• Request images from PIRCAM detectors.
• Verification of panel events.
• Home automation control (Control of all your smart home devices).
• Arm the security panel remotely.
• Create scenarios (example: When entering the house, turn on the hall light and turn on the heat).
• Create rules (example: Auto arming of the system, automatic switch off of lights, auto regulation of the light level, turning lights on and off depending on the ambient lux, simulating the presence, etc.)
• Add users and privilege management.
• Management of several panels with the same user.
• Integration with Alexa and Google home.
• Free application.
Have you forgotten to arm your security system? Don’t worry. With SmartHomeSec, you can remotely control all of your home automation devices and the security system.
Show More
Quoi de neuf dans la dernière version 2.24.1
Last updated on Apr 30, 2024
Vieilles Versions
Various improvements for the user and installer, see https://vestasecurity.eu/es/noticias-actualizaciones/ for more information.
Show More
Version History
2.24.1
Apr 30, 2024
Various improvements for the user and installer, see https://vestasecurity.eu/es/noticias-actualizaciones/ for more information.
2.23.0
Mar 27, 2024
Advanced function to memorise the code for multiple partitions
2.22.0
Feb 6, 2024
Various improvements, check full release on vestasecurity.eu
2.21.1
Dec 18, 2023
Various improvements, check full release on vestasecurity.eu
2.20.0
Nov 21, 2023
User experience and installer improvements, for more details of the review visit vestasecurity.eu
2.18.1
Sep 4, 2023
Improved user experience and installer, check the full release note at: vestasecurity.eu
2.17.0
Jun 30, 2023
Various improvements and user experience, check the vestasecurity.eu website for detailed release information.
2.16.0
May 16, 2023
Nuevas funciones
2.15.0
Mar 22, 2023
Improved translations
UI improvement
Improvements installer section
Discover all the news at vestasecurity.eu/en/updates
UI improvement
Improvements installer section
Discover all the news at vestasecurity.eu/en/updates
2.14.0
Feb 26, 2023
- Improved translations
- UI improvement
- Improvements installer section
- Added support for DIO-52-F1 868 in BOGP as H Series, with rule related functions available
- Integration with the MCO Home MH-4959 has been added.
- The subscription status of Dahua/IMOU cameras is now displayed, allowing users to know the current connection status and quickly reconnect if necessary.
- Discover all the news at vestasecurity.eu/en/updates
- UI improvement
- Improvements installer section
- Added support for DIO-52-F1 868 in BOGP as H Series, with rule related functions available
- Integration with the MCO Home MH-4959 has been added.
- The subscription status of Dahua/IMOU cameras is now displayed, allowing users to know the current connection status and quickly reconnect if necessary.
- Discover all the news at vestasecurity.eu/en/updates
2.12.0
Dec 29, 2022
Improved translations
UI improvement
Improvements installer section
UI improvement
Improvements installer section
2.11.0
Nov 12, 2022
Improved translations
Improved user interface
Installer section improvements
Discover all the news on vestasecurity.eu/en/updates
Improved user interface
Installer section improvements
Discover all the news on vestasecurity.eu/en/updates
2.10.0
Sep 21, 2022
Improved translations
Improved user interface
Added display of the status of wired zones
HTTP requests are supported in rules
Different privileges per user account
Best of VESTA camera integration
Integration of the WATCHMAN ZIGBEE lock
Temporary bypass for all authorized users
Download temperature/humidity/power records and Luxmeter levels in CSV
Automatic ARC programming using templates
Improved user interface
Added display of the status of wired zones
HTTP requests are supported in rules
Different privileges per user account
Best of VESTA camera integration
Integration of the WATCHMAN ZIGBEE lock
Temporary bypass for all authorized users
Download temperature/humidity/power records and Luxmeter levels in CSV
Automatic ARC programming using templates
2.9.0
Jul 7, 2022
- One-time bypass (temporary by pass)
- Activate beeps in the rule function
- Improved IR detector operation
- New languages: Catalan, Greek
- LoRa Dongle Setting (Possibility to view signal level)
- Possibility to edit Capture File "URL 1" by installer
- Installer can view system status on the web
- Day/Night mode in the APP
- Auto-check mode when updating FW
- Activate beeps in the rule function
- Improved IR detector operation
- New languages: Catalan, Greek
- LoRa Dongle Setting (Possibility to view signal level)
- Possibility to edit Capture File "URL 1" by installer
- Installer can view system status on the web
- Day/Night mode in the APP
- Auto-check mode when updating FW
2.8.0
May 11, 2022
Improved translations
UI improvement, added two options for mode change: Abort Arming, and Close Timing Window
Integration of AEOTEC devices by Z-WAVE
Possibility of remotely applying PIRCAMS configurations
Possibility of assigning user codes from 4 to 6 digits
Added "Online" status events
Optimization of photo transmission speed in case of alarm.
Enhanced Configuration Templates
Permissions for the request photo, enabled from the section list of user counts
Technician Restricted Rules
Daily test report at a set time
Ability to use hybrid keypad siren in all areas
Remote tag management
Report configuration by templates for greater ease
Remote wired zone module FW update
UI improvement, added two options for mode change: Abort Arming, and Close Timing Window
Integration of AEOTEC devices by Z-WAVE
Possibility of remotely applying PIRCAMS configurations
Possibility of assigning user codes from 4 to 6 digits
Added "Online" status events
Optimization of photo transmission speed in case of alarm.
Enhanced Configuration Templates
Permissions for the request photo, enabled from the section list of user counts
Technician Restricted Rules
Daily test report at a set time
Ability to use hybrid keypad siren in all areas
Remote tag management
Report configuration by templates for greater ease
Remote wired zone module FW update
2.7.0
Mar 16, 2022
Remote configuration and management of TAGS for card/keypad readers with NFC.
New option for the daily test report of the control panel configurable at a specific time:
08:00h or 12:00h
Possibility to configure the vibration sensor "VESTA-060N" remotely, options available:
Sensitivity setting: Low, Medium or High
Operating mode configuration: Shock or Vibration.
More advanced options in rules:
- Added option to trigger a rule for each VESTA panel user.
- Added Bypass and Unbypass options for any devices from rule actions
- Added a solution adapted for installation of the VESTA system in storage rooms (Protection of up to 50 doors of different subscribers).
Rights to capture photos configurable by each user
- Added to the user interface the option to restrict or authorize each user of the system to request photos.
- Installer can now enable/disable access rights to request photos/videos for each user
More options adapted to comfort and usability
- Added option to enable/disable monitoring of each device
- Removed checkbox to enable/disable armed/disarmed reporting for each user (Default is enabled)
SDCO-3-ZW integration
- The SDCO-3-ZW can now be added to panels as multi-sensors:
- Smoke Detector
- IR
- Temperature sensor
- CO detector
- Heat detector
Update of the usurio pin code digits
- The pin code has been updated and now 4 to 6 digit user codes are allowed.
Online panel event
- Online restoration notification has been added (Panel Online)
- When disconnected panels are online, a "Panel Online" event will be notified.
Integration of remote configuration for PIRCAMS.
- Remote configuration of both indoor and outdoor PIRCAM detectors is now allowed from the APP.
Integration of new AEOTEC devices
- AEOTEC MultiSensor 6 and Energy Meter ZW0953C60A are integrated with the system.
- MultiSensor 6 will be added to a panel as a multisensor:
- IR
- Environmental sensor (temperature and humidity)
- Lux meter
- The ZW0953C60A energy meter is added to the panel as three energy meters, each device for one phase of consumption measurement.
Integration of Drop Sensor FS-mmW-3
- FS-mmW-3 is integrated as a drop sensor with configurable PIR sensor.
- The drop detection sensitivity can be adjusted in 5 levels.
Translated with www.DeepL.com/Translator (free version)
New option for the daily test report of the control panel configurable at a specific time:
08:00h or 12:00h
Possibility to configure the vibration sensor "VESTA-060N" remotely, options available:
Sensitivity setting: Low, Medium or High
Operating mode configuration: Shock or Vibration.
More advanced options in rules:
- Added option to trigger a rule for each VESTA panel user.
- Added Bypass and Unbypass options for any devices from rule actions
- Added a solution adapted for installation of the VESTA system in storage rooms (Protection of up to 50 doors of different subscribers).
Rights to capture photos configurable by each user
- Added to the user interface the option to restrict or authorize each user of the system to request photos.
- Installer can now enable/disable access rights to request photos/videos for each user
More options adapted to comfort and usability
- Added option to enable/disable monitoring of each device
- Removed checkbox to enable/disable armed/disarmed reporting for each user (Default is enabled)
SDCO-3-ZW integration
- The SDCO-3-ZW can now be added to panels as multi-sensors:
- Smoke Detector
- IR
- Temperature sensor
- CO detector
- Heat detector
Update of the usurio pin code digits
- The pin code has been updated and now 4 to 6 digit user codes are allowed.
Online panel event
- Online restoration notification has been added (Panel Online)
- When disconnected panels are online, a "Panel Online" event will be notified.
Integration of remote configuration for PIRCAMS.
- Remote configuration of both indoor and outdoor PIRCAM detectors is now allowed from the APP.
Integration of new AEOTEC devices
- AEOTEC MultiSensor 6 and Energy Meter ZW0953C60A are integrated with the system.
- MultiSensor 6 will be added to a panel as a multisensor:
- IR
- Environmental sensor (temperature and humidity)
- Lux meter
- The ZW0953C60A energy meter is added to the panel as three energy meters, each device for one phase of consumption measurement.
Integration of Drop Sensor FS-mmW-3
- FS-mmW-3 is integrated as a drop sensor with configurable PIR sensor.
- The drop detection sensitivity can be adjusted in 5 levels.
Translated with www.DeepL.com/Translator (free version)
2.6.1
Jan 31, 2022
Bug fixing.
2.6.0
Jan 5, 2022
NEW FUNCTIONS:
1. Possibility of changing the name of the AREAS.
2. WIFI configuration from the WEB and remote APP
3. Signal level icons of all radio devices
4. Loop number 10 has been added to all hybrid control panels to be able to wire the sensors with Antimasking in Normally Closed:
5. --> Integration of a third communication channel in VESTA control panels: LoRaWAN [BETA 1.0].
6. --> Official APPLE WATCH integration
USER INTERFACE, APPLICATIONS AND SOFTWARE OPTIMIZATIONS:
1. Optimized transmission speed of Z-WAVE device control commands
2. Alarm option added silent as a security attribute for any device 3.
3. The configuration of the built-in OPTEX detectors is stored in the panel, the installer can see the applied configuration at any time:
4. The VESTA-223 3-in-1 sensors now allow the use of all temperature values, humidity and light meter to activate automatic rules, which gives more flexibility and intelligence to the system, and even allows a history of each value to be stored for 30 days.
1. Possibility of changing the name of the AREAS.
2. WIFI configuration from the WEB and remote APP
3. Signal level icons of all radio devices
4. Loop number 10 has been added to all hybrid control panels to be able to wire the sensors with Antimasking in Normally Closed:
5. --> Integration of a third communication channel in VESTA control panels: LoRaWAN [BETA 1.0].
6. --> Official APPLE WATCH integration
USER INTERFACE, APPLICATIONS AND SOFTWARE OPTIMIZATIONS:
1. Optimized transmission speed of Z-WAVE device control commands
2. Alarm option added silent as a security attribute for any device 3.
3. The configuration of the built-in OPTEX detectors is stored in the panel, the installer can see the applied configuration at any time:
4. The VESTA-223 3-in-1 sensors now allow the use of all temperature values, humidity and light meter to activate automatic rules, which gives more flexibility and intelligence to the system, and even allows a history of each value to be stored for 30 days.
2.5.0
Nov 7, 2021
Portal & App:
Internal Siren and Alarm Settings
Newly Registered User Default Email Notification Setting
Siren Button
Alarm Options in Rule and Events Setting for Reporting to ARC
Installer Batch Config
Philio PST10-A Integration
Apps:
Ezviz IP Cam Integrationy
- Ezviz IP cam
Phone Widgets
- Mode change widgets and scene apply widgets are added.
Internal Siren and Alarm Settings
Newly Registered User Default Email Notification Setting
Siren Button
Alarm Options in Rule and Events Setting for Reporting to ARC
Installer Batch Config
Philio PST10-A Integration
Apps:
Ezviz IP Cam Integrationy
- Ezviz IP cam
Phone Widgets
- Mode change widgets and scene apply widgets are added.
2.4.1
Oct 2, 2021
Minor bug fixes and improvements.
2.4.0
Sep 7, 2021
New Hyundai IP Cams Integration
Translation Update for German
Multiple Accesses to One Installer Account
5 Languages for SMS Text Messages
MCP Home Thermostats Integration
New UI for SmartHomeSec
Hybrid is Renamed as Hybrid/HSGW-IMAX
Auto Maintenance - Remote Routine Inspection
Batch Programming
Translation Update for German
Multiple Accesses to One Installer Account
5 Languages for SMS Text Messages
MCP Home Thermostats Integration
New UI for SmartHomeSec
Hybrid is Renamed as Hybrid/HSGW-IMAX
Auto Maintenance - Remote Routine Inspection
Batch Programming
2.3.1
Jul 15, 2021
PANICO S.O.S BUTTON INTEGRATION WITH GEOLOCATION SHIPPING
When the user presses the SOS button, the system will automatically capture and report it to the rest of the users indicating the situation and location of the person who pressed it, in turn, if it is connected to an ARC, the location is sent too.
When the user presses the SOS button, the system will automatically capture and report it to the rest of the users indicating the situation and location of the person who pressed it, in turn, if it is connected to an ARC, the location is sent too.
2.3.0
Jul 9, 2021
Minor fixes and improvements
2.2.0
Jun 25, 2021
- Hikvision IP camera integration
- Ability to add Dahua / Hikvision IP cameras and devices in GSM / WIFI mode
- Set Alarm as default and priority notification in user section
- Third-party Z-Wave device integrations (AEOTEC)
- Integration of scenes / rules to execute actions with the 4-in-1 smoke detector
- Integration of expanders in the installer section
- Z-Wave integration of all blind controllers
- In case of Alarm: possibility of capturing a sequence of photos in DAHUA camera automatically and quickly
- Integration of OPTEX detectors (Alarm signals, sabotage and configuration)
- Customization of the user interface and improved translations
- Possibility of activating automatic rules for temperatures down to -30ºC
- Ability to add Dahua / Hikvision IP cameras and devices in GSM / WIFI mode
- Set Alarm as default and priority notification in user section
- Third-party Z-Wave device integrations (AEOTEC)
- Integration of scenes / rules to execute actions with the 4-in-1 smoke detector
- Integration of expanders in the installer section
- Z-Wave integration of all blind controllers
- In case of Alarm: possibility of capturing a sequence of photos in DAHUA camera automatically and quickly
- Integration of OPTEX detectors (Alarm signals, sabotage and configuration)
- Customization of the user interface and improved translations
- Possibility of activating automatic rules for temperatures down to -30ºC
1.73.0
Mar 25, 2021
New language: Finnish
Z-WAVE device compatibility: Fibaro and MCO
Option for SUBSCRIBER settings for FTP photos
Multi-language voice message selection for indoor sirens with voice.
It allows adding DAHUA cameras in Hybrid control panels.
Z-WAVE device compatibility: Fibaro and MCO
Option for SUBSCRIBER settings for FTP photos
Multi-language voice message selection for indoor sirens with voice.
It allows adding DAHUA cameras in Hybrid control panels.
SmartHomeSec FAQ
SmartHomeSec est disponible dans des régions autres que les pays restreints suivants:
China
SmartHomeSec prend en charge Français, Allemand, Anglais, Catalan, Chinois traditionnel, Danois, Espagnol, Finnois, Grec, Italien, Norvégien, Néerlandais, Polonais, Portugais, Roumain, Suédois, Thaï, Turc
Cliquez ici pour savoir comment télécharger SmartHomeSec dans un pays ou une région restreints.
Consultez la liste suivante pour voir les exigences minimales de SmartHomeSec.
iPhone
Nécessite iOS 12.0 ou version ultérieure.
Apple Watch
Nécessite watchOS 7.1 ou version ultérieure.
iPod touch
Nécessite iOS 12.0 ou version ultérieure.
