iOBD2
Free
5.3for iPhone, iPad and more
Age Rating
iOBD2 Screenshots
About iOBD2
iOBD2 is an app for your car. It makes your iPhone/iPod touch/iPad into a cool vehicle diagnostic tool to read your engine data.
1. When you are driving and MIL is on, you can check your car and know whether you can go on or not.
2. When there are troubles with your car, you can check it yourself and know what the problems are, and then ask for help by twitter or facebook from others.
3. You can know real time information such as fuel consumption, torque, acceleration, etc from iOBD2 on your iPhone/iPod touch/iPad.
4. iOBD2 can customized your gauge and after select the data that you are interested in, it will show you only the data which you concern.
5. You can share the record what you get from the car by iOBD2 on twitter and facebook.
!!Attention:
1.Please make sure that your vehicle is with OBD-II/EOBD compliance before purchasing!
2.You can upgrade your general iOBD2 to iOBD2-BMW or iOBD2-VAG when you only have iOBD2 hardware , and you only need to pay $80.00 for iOBD2-BMW or $30.00 for iOBD2-VAG without paying extra money for hardware.
Buy multiple gauges iOBD2 with scream and best price! (Note: Not all OBD-II compliant vehicles support all these parameters)
DISCLAIMER: After buy our iOBD2 hardware interface, and download iOBD2 App, then your iPhone/iPod touch/iPad can communicate with the vehicle. You can buy it on our ebay shop or amazon shop or contact our sales.
Function:
1. Diagnostic
[Read DTC]: Read the current DTC that engine has stored, and show DTC info.
[Clear DTC]: Clear all the current DTC.
[Live data]: Read all the running parameters that related to the ECU.
[Freeze frame data]: When OBD system sets the DTC, it will record the system running parameters related to the malfunction at the same time. And these parameters are called freeze frame data.
[Readiness test]: Readiness reflects the status that all the valid diagnostic functions.
[Read vehicle info]: Read vehicle info such as Vehicle Identification Number (VIN), Calibration IDs (CALID) and Calibration Verification Number (CVN).
[O2 Sensor test]: It allows access to the on-board oxygen sensor monitoring test results. The same information may be obtained by the use of [Mode 6 test].
[Mode 6 test]: It allows access to the results for on-board diagnostic monitoring tests of specific components/systems that are not continuously monitored.
[EVAP System Test]: The purpose of this service is to enable the external test equipment to control the operation of an on-board system, test or component.
2. My dashboard
[Idle mode]: engine rotational speed, water temperature, battery voltage, mass air flow, instant fuel consumption (static), ignition timing, ever wished you had your own customizable gauges, showing only the data you were interested in.
[Cruise mode]: vehicle speed, vehicle travel time, vehicle travel average speed, continuous running mileage, avg. fuel consumption., ever wished you had your own customizable gauges, showing only the data you were interested in.
[Sport mode]: engine rotational speed, vehicle speed, water temperature, ins. fuel consumption(dynamic), acceleration speed, ever wished you had your own customizable gauges, showing only the data you were interested in.
[Performance mode]: engine rotational speed, vehicle speed, power, torque, horsepower, ever wished you had your own customizable gauges, showing only the data you were interested in.
3. Performance test
[Accelerate/Decelerate test]: Test acceleration / deceleration process time and distance.
[0 to 400m acceleration test]: Test spends time from 0 to 400 meters.
4. Settings
You can set units, alarms, coefficient and also customized the dashboard here.
5. History
After record the history data, you can share the record what you get from the car by iOBD2 on Twitter and facebook.
Package
Hardware: iOBD2 unit
Software: iOBD2 client software on app store
Visit the iOBD2 product page for more info:
www.iobd2.com
1. When you are driving and MIL is on, you can check your car and know whether you can go on or not.
2. When there are troubles with your car, you can check it yourself and know what the problems are, and then ask for help by twitter or facebook from others.
3. You can know real time information such as fuel consumption, torque, acceleration, etc from iOBD2 on your iPhone/iPod touch/iPad.
4. iOBD2 can customized your gauge and after select the data that you are interested in, it will show you only the data which you concern.
5. You can share the record what you get from the car by iOBD2 on twitter and facebook.
!!Attention:
1.Please make sure that your vehicle is with OBD-II/EOBD compliance before purchasing!
2.You can upgrade your general iOBD2 to iOBD2-BMW or iOBD2-VAG when you only have iOBD2 hardware , and you only need to pay $80.00 for iOBD2-BMW or $30.00 for iOBD2-VAG without paying extra money for hardware.
Buy multiple gauges iOBD2 with scream and best price! (Note: Not all OBD-II compliant vehicles support all these parameters)
DISCLAIMER: After buy our iOBD2 hardware interface, and download iOBD2 App, then your iPhone/iPod touch/iPad can communicate with the vehicle. You can buy it on our ebay shop or amazon shop or contact our sales.
Function:
1. Diagnostic
[Read DTC]: Read the current DTC that engine has stored, and show DTC info.
[Clear DTC]: Clear all the current DTC.
[Live data]: Read all the running parameters that related to the ECU.
[Freeze frame data]: When OBD system sets the DTC, it will record the system running parameters related to the malfunction at the same time. And these parameters are called freeze frame data.
[Readiness test]: Readiness reflects the status that all the valid diagnostic functions.
[Read vehicle info]: Read vehicle info such as Vehicle Identification Number (VIN), Calibration IDs (CALID) and Calibration Verification Number (CVN).
[O2 Sensor test]: It allows access to the on-board oxygen sensor monitoring test results. The same information may be obtained by the use of [Mode 6 test].
[Mode 6 test]: It allows access to the results for on-board diagnostic monitoring tests of specific components/systems that are not continuously monitored.
[EVAP System Test]: The purpose of this service is to enable the external test equipment to control the operation of an on-board system, test or component.
2. My dashboard
[Idle mode]: engine rotational speed, water temperature, battery voltage, mass air flow, instant fuel consumption (static), ignition timing, ever wished you had your own customizable gauges, showing only the data you were interested in.
[Cruise mode]: vehicle speed, vehicle travel time, vehicle travel average speed, continuous running mileage, avg. fuel consumption., ever wished you had your own customizable gauges, showing only the data you were interested in.
[Sport mode]: engine rotational speed, vehicle speed, water temperature, ins. fuel consumption(dynamic), acceleration speed, ever wished you had your own customizable gauges, showing only the data you were interested in.
[Performance mode]: engine rotational speed, vehicle speed, power, torque, horsepower, ever wished you had your own customizable gauges, showing only the data you were interested in.
3. Performance test
[Accelerate/Decelerate test]: Test acceleration / deceleration process time and distance.
[0 to 400m acceleration test]: Test spends time from 0 to 400 meters.
4. Settings
You can set units, alarms, coefficient and also customized the dashboard here.
5. History
After record the history data, you can share the record what you get from the car by iOBD2 on Twitter and facebook.
Package
Hardware: iOBD2 unit
Software: iOBD2 client software on app store
Visit the iOBD2 product page for more info:
www.iobd2.com
Show More
What's New in the Latest Version 5.3
Last updated on Apr 27, 2016
Old Versions
This app has been updated by Apple to display the Apple Watch app icon.
Fixed a bug
Fixed a bug
Show More
Version History
5.3
Apr 27, 2016
This app has been updated by Apple to display the Apple Watch app icon.
Fixed a bug
Fixed a bug
5.2
Apr 4, 2016
Modify the function of some unnecessary
5.1
Mar 1, 2016
1. Adds trip record function for iOBD2 JAPAN mode .
2. Add 0.66 L displacement vehicle choice .
3. Added a performance chart recording function for IOBD2 JAPAN mode 。
2. Add 0.66 L displacement vehicle choice .
3. Added a performance chart recording function for IOBD2 JAPAN mode 。
5.0
Jan 27, 2016
Add a kind of hardware support
4.9
Jan 7, 2016
1. Fixed the problem of ELM327 hardware without WI-FI connection.
2. Fixed the problem of existing Chinese and verbal errors in English environment.
3. Fixed the problem of failing to access function interface via guide page on iPhone4.
4. Fixed the problem of Bluetooth searching flash back in iOS7 and earlier.
5. Added the function of manually updating the firmware.
6. Fully optimized iOBD2 pro related functions.
2. Fixed the problem of existing Chinese and verbal errors in English environment.
3. Fixed the problem of failing to access function interface via guide page on iPhone4.
4. Fixed the problem of Bluetooth searching flash back in iOS7 and earlier.
5. Added the function of manually updating the firmware.
6. Fully optimized iOBD2 pro related functions.
4.8
Dec 19, 2015
Optimize the compatibility of the car the iOBD2 mini box. To improve the stability of the software.
4.7.1
Dec 1, 2015
Fixed a bug
4.7
Nov 3, 2015
Add MI mode, supporting the CHEMI box
4.6
Sep 24, 2015
Support IOS9.0 system
4.5
Jul 27, 2015
1.Fix the problem of supporting landscape display
2.Fix the problem of mess when rotating the screen
2.Fix the problem of mess when rotating the screen
4.4
Apr 28, 2015
1. Revised the DTC errors in the page of diagnosis.
2. Revised some data cannot display when enter My Dashboard at the second time.
2. Revised some data cannot display when enter My Dashboard at the second time.
4.3
Mar 25, 2015
更新一些蓝牙连接不上的问题
4.2
Oct 7, 2014
fix bluetooth 4.0
4.1
Sep 2, 2014
1. Modify the function of fault code query.
2. Shield the bluetooth 4.0.
3. Modify some bugs
2. Shield the bluetooth 4.0.
3. Modify some bugs
4.0
Jul 25, 2014
fix some bugs
3.9
May 28, 2014
1. add Opel KWP 10400 Mode
2. fix some bugs
2. fix some bugs
3.8
Apr 28, 2014
1. add the connection way of bluetooth 4.0 ELM327, the iOS device: iPhone4S, iPod touch5, new iPad, iPad mini and above device can use.
2. fix some bugs.
2. fix some bugs.
3.7
Mar 7, 2014
add language of Turkish
3.6
Jan 26, 2014
1. add data stream item "Boost/Vacuum" in "my dashboard"
2. add HUD display in "my dashboard"
3. fix some potential bugs
2. add HUD display in "my dashboard"
3. fix some potential bugs
3.5
Dec 24, 2013
1. add "custom mode" into "my dashboard"
2. fix some bugs
2. fix some bugs
3.4
Nov 28, 2013
1. add auto connection
2. add language settings
3. fix some bugs
2. add language settings
3. fix some bugs
3.3
Oct 18, 2013
1.support iOS7
2.application of optimization
2.application of optimization
3.2
Sep 20, 2013
1. add performance graph function
2. fix bugs of last version
2. fix bugs of last version
3.1
Aug 12, 2013
1. support for ELM327 Wi-Fi hardware
2. purchase extend function for ELM327 Wi-Fi
2. purchase extend function for ELM327 Wi-Fi
3.0
Jul 26, 2013
1. fix all communication protocols to more stable.
2. fix all diagnose functions.
3. download language packet on our server, to make the size of app more smaller.
2. fix all diagnose functions.
3. download language packet on our server, to make the size of app more smaller.
iOBD2 FAQ
Click here to learn how to download iOBD2 in restricted country or region.
Check the following list to see the minimum requirements of iOBD2.
iPhone
Requires iOS 6.0 or later.
iPad
Requires iPadOS 6.0 or later.
iPod touch
Requires iOS 6.0 or later.
iOBD2 supports English, French, German, Hungarian, Italian, Japanese, Korean, Polish, Portuguese, Russian, Simplified Chinese, Spanish, Traditional Chinese, Turkish
