Age Rating
Gamma Board スクリーンショット
About Gamma Board
Remotely control the colors of an array screens.
Important: requires Gamma Control 6 (for Mac) or Scenica Player (for Mac, iPad, iPhone, Apple TV), sold separately.
Gamma Board makes it easy to change the gamma settings for screens on the local network. Devices running Gamma Control 6 or Scenica Player can be configured from afar using an iPhone or iPad. This is ideal for adjusting screen colors while looking from behind the camera. Tweak the colors to match the lighting and dim screens in a way that avoids flicker caused by the strobing LED backlight.
SETS
Create separate documents to save settings for a set of screens. Open an existing set to restore automatically its settings to the screens on the network.
Inside a set you can see a list of screens that have been added. As soon as the set opens, Gamma Board establishes communication with the Gamma Control or Scenica Player running over the local network to apply its settings. You can add, remove, and reorder screens in the list.
The screen list also shows you at a glance which screens are online and offline as well as which screens are currently displaying a calibration pattern.
GAMMA SETTINGS
For each group and each screen in a set, you can edit its gamma settings. They are applied instantly to the screen over the network every time you make a change. Just look up at the screen to see the results live.
From the settings screen, tap the icon with three sliders to open the preset panel where you can save settings and restore them later.
GROUPS
Each set document starts with one group. A group allows gamma settings for many screens to be controlled simultaneously. More groups can be added to control independently various subsets of the screen list.
Screens retain their individual settings, allowing them to be calibrated independently. Group settings are combined with those individual settings to create the final gamma values sent to each screen.
ADDING A SCREEN
When adding a new screen to a set, you are presented with a list of all the available screens on the local network. Tap a screen in the list to add it to the current set.
Gamma Board talks to Gamma Control 6 or Scenica Player on the remote device to receive and apply its settings. Install Gamma Control or Scenica Player, then check Allow remote configuration in Preferences and this device is ready to for Gamma Board.
Connect as many devices as you can to your local network and control all the screens that are attached to them. There is no limit other than the number of copies of Gamma Control and Scenica Player you have.
CALIBRATION PATTERNS
At your fingertip, two full-screen calibration patterns can show up on connected screens. (Note: calibration patterns are only available on devices running Gamma Control, not Scenica Player.)
REQUIREMENTS
• Gamma Control 6 on one or more Macs, or Scenica Player on one or more devices. Sold separately.
• A local network connecting all the devices (Wi-Fi or wired).
(Internet is not needed: closed internal network are supported.)
Important: requires Gamma Control 6 (for Mac) or Scenica Player (for Mac, iPad, iPhone, Apple TV), sold separately.
Gamma Board makes it easy to change the gamma settings for screens on the local network. Devices running Gamma Control 6 or Scenica Player can be configured from afar using an iPhone or iPad. This is ideal for adjusting screen colors while looking from behind the camera. Tweak the colors to match the lighting and dim screens in a way that avoids flicker caused by the strobing LED backlight.
SETS
Create separate documents to save settings for a set of screens. Open an existing set to restore automatically its settings to the screens on the network.
Inside a set you can see a list of screens that have been added. As soon as the set opens, Gamma Board establishes communication with the Gamma Control or Scenica Player running over the local network to apply its settings. You can add, remove, and reorder screens in the list.
The screen list also shows you at a glance which screens are online and offline as well as which screens are currently displaying a calibration pattern.
GAMMA SETTINGS
For each group and each screen in a set, you can edit its gamma settings. They are applied instantly to the screen over the network every time you make a change. Just look up at the screen to see the results live.
From the settings screen, tap the icon with three sliders to open the preset panel where you can save settings and restore them later.
GROUPS
Each set document starts with one group. A group allows gamma settings for many screens to be controlled simultaneously. More groups can be added to control independently various subsets of the screen list.
Screens retain their individual settings, allowing them to be calibrated independently. Group settings are combined with those individual settings to create the final gamma values sent to each screen.
ADDING A SCREEN
When adding a new screen to a set, you are presented with a list of all the available screens on the local network. Tap a screen in the list to add it to the current set.
Gamma Board talks to Gamma Control 6 or Scenica Player on the remote device to receive and apply its settings. Install Gamma Control or Scenica Player, then check Allow remote configuration in Preferences and this device is ready to for Gamma Board.
Connect as many devices as you can to your local network and control all the screens that are attached to them. There is no limit other than the number of copies of Gamma Control and Scenica Player you have.
CALIBRATION PATTERNS
At your fingertip, two full-screen calibration patterns can show up on connected screens. (Note: calibration patterns are only available on devices running Gamma Control, not Scenica Player.)
REQUIREMENTS
• Gamma Control 6 on one or more Macs, or Scenica Player on one or more devices. Sold separately.
• A local network connecting all the devices (Wi-Fi or wired).
(Internet is not needed: closed internal network are supported.)
Show More
最新バージョン 1.3.1 の更新情報
Last updated on 2023年01月18日
旧バージョン
• Scenica Player is now officially supported at the remote end in addition to Gamma Control.
• Screens from multi-monitor devices would sometime jump around when selecting a new screen to add. This is now fixed.
• Small improvements to make network communications more reliable.
• Screens from multi-monitor devices would sometime jump around when selecting a new screen to add. This is now fixed.
• Small improvements to make network communications more reliable.
Show More
Version History
1.3.1
2023年01月18日
• Scenica Player is now officially supported at the remote end in addition to Gamma Control.
• Screens from multi-monitor devices would sometime jump around when selecting a new screen to add. This is now fixed.
• Small improvements to make network communications more reliable.
• Screens from multi-monitor devices would sometime jump around when selecting a new screen to add. This is now fixed.
• Small improvements to make network communications more reliable.
1.3
2019年09月02日
• Saved Presets: for each group and each screen, you can manage a list of presets and restore them at any time.
• Groups can now push their settings to all screens in the group, blending values with existing screen settings (tap the group icon above the settings).
• From the group settings, you can reset all the individual screens settings (tap the group icon above the settings).
• Document Browser: you can now navigate and open documents using the standard document interface from iOS (requires iOS 11 or later)..
• Groups can now push their settings to all screens in the group, blending values with existing screen settings (tap the group icon above the settings).
• From the group settings, you can reset all the individual screens settings (tap the group icon above the settings).
• Document Browser: you can now navigate and open documents using the standard document interface from iOS (requires iOS 11 or later)..
1.2
2018年04月11日
• Screens can now be arranged in groups. Groups have gamma settings of their own that are combined with the settings for each individual screen.
• Fixed an issue with the list of sets which could become out of sync with the the Files app and crash in some circumstances.
• Fixed an issue with the list of sets which could become out of sync with the the Files app and crash in some circumstances.
1.1
2017年10月18日
• Drag and drop support in the screen list when running on iOS 11 (outside of Edit mode).
• Can now drag and drop set files with other apps on iPad running iOS 11.
• Sliders are now wider on iPad.
• Fixed a problem going to the settings screen on iPhone for a screen that was just added.
• Fixed some colors not showing correctly on iOS 11.
• Can now drag and drop set files with other apps on iPad running iOS 11.
• Sliders are now wider on iPad.
• Fixed a problem going to the settings screen on iPhone for a screen that was just added.
• Fixed some colors not showing correctly on iOS 11.
1.0
2017年07月24日
Gamma Board 価格
今日:
¥12,000
最低価格:
¥12,000
最高価格:
¥12,800
Gamma Board FAQ
ここをクリック!地理的に制限されているアプリのダウンロード方法をご参考ください。
次のリストをチェックして、Gamma Boardの最低システム要件をご確認ください。
iPhone
iOS 11.0以降が必要です。
iPad
iPadOS 11.0以降が必要です。
iPod touch
iOS 11.0以降が必要です。
Gamma Boardは次の言語がサポートされています。 フランス語, 英語