Pelco Mobile™
無料
3.3.9for iPhone, iPad and more
Age Rating
Pelco Mobile™ スクリーンショット
About Pelco Mobile™
Pelco Mobile™ provides remote access to live and recorded video from Pelco VideoXpert Systems, Digital Sentry systems, Endura networks equipped with SM5200 System Managers, and Sarix cameras. Monitor the people and property you are protecting from anywhere over a Wi-Fi, 3G, or 4G connection. Simultaneously connect to up to 150 Pelco VMS systems to access video across VMS environments.
Features:
• View live and recorded video from cameras attached to VideoXpert (Enterprise, Ultimate and Professional), Digital Sentry, and Endura SM5200 systems
• View live images directly from Pelco IP Cameras operating on Sarix firmware version 1.7.x (or later)
• Control PTZ cameras attached to a VideoXpert, DS, or SM5200 system
• Onscreen application help
• Tag Searches makes organizing the cameras easier.
• Optera 180/270/360 support through VxStorage for Live/PTZ.
• EVO Camera support
• Triggering Preset/Patterns
• VideoXpert: Support for video bookmarking
• VideoXpert: Support for viewing/acknowledging events
Requirements:
• VideoXpert version 1.9 or later
• Digital Sentry – requires version 7.13 or later. Digital Sentry versions earlier than 7.8 require the DS Web Service, available on Pelco.com.
• Endura – requires v1.0 or later SM5200 System Manager; PTZ and Recorded video require v1.4 or later
• Pelco Aggregation - requires v1.0 or above Pelco Aggregation server
• Pelco IP camera direct connection – requires Sarix firmware version 1.7.x or above
• Network access to the desired cameras and systems is required to view video feeds via Wi-Fi or 3G/4G connection
Features:
• View live and recorded video from cameras attached to VideoXpert (Enterprise, Ultimate and Professional), Digital Sentry, and Endura SM5200 systems
• View live images directly from Pelco IP Cameras operating on Sarix firmware version 1.7.x (or later)
• Control PTZ cameras attached to a VideoXpert, DS, or SM5200 system
• Onscreen application help
• Tag Searches makes organizing the cameras easier.
• Optera 180/270/360 support through VxStorage for Live/PTZ.
• EVO Camera support
• Triggering Preset/Patterns
• VideoXpert: Support for video bookmarking
• VideoXpert: Support for viewing/acknowledging events
Requirements:
• VideoXpert version 1.9 or later
• Digital Sentry – requires version 7.13 or later. Digital Sentry versions earlier than 7.8 require the DS Web Service, available on Pelco.com.
• Endura – requires v1.0 or later SM5200 System Manager; PTZ and Recorded video require v1.4 or later
• Pelco Aggregation - requires v1.0 or above Pelco Aggregation server
• Pelco IP camera direct connection – requires Sarix firmware version 1.7.x or above
• Network access to the desired cameras and systems is required to view video feeds via Wi-Fi or 3G/4G connection
Show More
最新バージョン 3.3.9 の更新情報
Last updated on 2022年06月09日
旧バージョン
Fixed the ability to select devices from the system menu
Show More
Version History
3.3.9
2022年06月09日
Fixed the ability to select devices from the system menu
3.3.8
2021年02月26日
Fixed the ability to stream an authentication-enabled Pelco camera without being attached to a VMS.
3.3.7
2021年01月15日
Fixed crash when adding a bookmark.
3.3.6
2021年01月13日
- Updated Oncam SDK. EVO camera de-warping is now re-enabled.
- Fixed issue with EVO de-warping in landscape orientation.
- Fixed issue with EVO de-warping in landscape orientation.
3.3.4
2020年10月29日
* Fixed crash bugs when tapping in the sidebar.
* Fixed freeze issues w/ iOS 14.
* Fixed text input visibility in dark mode.
* Disabled search capability to improve application stability.
* Fixed freeze issues w/ iOS 14.
* Fixed text input visibility in dark mode.
* Disabled search capability to improve application stability.
3.3.3
2020年06月12日
- Fixed issue that sometimes caused saved systems to disappear.
- Corrected version number on "About" screen.
- Corrected version number on "About" screen.
3.3.2
2020年05月04日
- Correction to app description.
3.3.1
2020年01月31日
Changes for iOS 13 compatibility.
3.3.0
2019年02月08日
Bug fixes and enhancements.
3.2.9
2018年12月13日
Following are Bug fixes and improvements.
1. Exporting Database from one device and import in another device
2. App menu inaccessible in iPhone X
3. iPhone X - Settings controls not accessible landscape mode
7. iPhone - X - Camera/System tree is going to hide state while saving camera/system in landscape mode
5. App crashes while connecting to DS 7.19 version
6. Application crash when selecting favorites camera from DS
7. Vx Aggregation camera list is showing "0" after Vx upgrade to 3.0
8. Device count of aggregation main system is not updating when user try to refresh/edit system details
1. Exporting Database from one device and import in another device
2. App menu inaccessible in iPhone X
3. iPhone X - Settings controls not accessible landscape mode
7. iPhone - X - Camera/System tree is going to hide state while saving camera/system in landscape mode
5. App crashes while connecting to DS 7.19 version
6. Application crash when selecting favorites camera from DS
7. Vx Aggregation camera list is showing "0" after Vx upgrade to 3.0
8. Device count of aggregation main system is not updating when user try to refresh/edit system details
3.2.8
2018年09月03日
Thank you for using Pelco Mobile!
We regularly update our app to make it more powerful, fix bugs and introduce new features.
We regularly update our app to make it more powerful, fix bugs and introduce new features.
3.2.7
2018年07月17日
Bug fixes and improvements.
3.2.6
2018年05月15日
- Bug fixes and performance improvements.
1. Fixed application crashes sometimes while enable PTZ button for Evo-Grandeye cameras from Digital Sentry.
2. Fixed issue When an Optera Camera added from Digital Sentry server to streaming layout, application gets hang.
3. Fixed issue when Optera camera streaming from Digital sentry system is going to pause state after 20 seconds of play.
4. Fixed a Playback issue which will not start from beginning if user press the play button at the end of playback.
5. Fixed issue with Playback controls are not being isplayed for the camera which is added from an aggregation sub-system.
6. Fixed an issue where Optera-Panoimmersive cameras recording on DS had distorted video.
7. Fixed a Playback of the camera which was randomly paused when connected to a DS Server.
8. Fixed an issue where duration of 30 sec playback is varying.
9. Fixed a issue where Playback button is visible for non recording EVO-Grandeye cameras connected to Vx and VxPro servers.
10. Fixed an issue where Camera list is empty while adding VX aggregator to the systems
11. Fixed an issue where Empty cells are shown in Events severity filter pop over
12. Fixed issue for Green color bar is shown in Playback selection screen.
13. Fixed a UI issue in Side Menu, header bar was misaligned.
1. Fixed application crashes sometimes while enable PTZ button for Evo-Grandeye cameras from Digital Sentry.
2. Fixed issue When an Optera Camera added from Digital Sentry server to streaming layout, application gets hang.
3. Fixed issue when Optera camera streaming from Digital sentry system is going to pause state after 20 seconds of play.
4. Fixed a Playback issue which will not start from beginning if user press the play button at the end of playback.
5. Fixed issue with Playback controls are not being isplayed for the camera which is added from an aggregation sub-system.
6. Fixed an issue where Optera-Panoimmersive cameras recording on DS had distorted video.
7. Fixed a Playback of the camera which was randomly paused when connected to a DS Server.
8. Fixed an issue where duration of 30 sec playback is varying.
9. Fixed a issue where Playback button is visible for non recording EVO-Grandeye cameras connected to Vx and VxPro servers.
10. Fixed an issue where Camera list is empty while adding VX aggregator to the systems
11. Fixed an issue where Empty cells are shown in Events severity filter pop over
12. Fixed issue for Green color bar is shown in Playback selection screen.
13. Fixed a UI issue in Side Menu, header bar was misaligned.
3.2.5
2018年02月20日
Bug fix release for iOS 11.2, Following improvements/fixes are included.
•Fixed connection issue for Sarix pro, spectra pro and Enhanced 2 cameras configured for closed authentication.
•Issue fixed with Optera camera connected to DS server.
•Added warning message when user selects second Optera Camera from DS Server, due to streaming limitations.
•Fixed periodic connection issue when connected with specific cameras.
•Fixed crashing issue on iPad Air.
•Fixed issue with "stop pattern" on Spectra Pro cameras.
•Fixed Camera orientation problem for VxPro EVO camera in landscape mode in iPad Mini.
•Updated the host names for Demo systems and removed Endura Demo system from system listing.
•Fixed connection issue for Sarix pro, spectra pro and Enhanced 2 cameras configured for closed authentication.
•Issue fixed with Optera camera connected to DS server.
•Added warning message when user selects second Optera Camera from DS Server, due to streaming limitations.
•Fixed periodic connection issue when connected with specific cameras.
•Fixed crashing issue on iPad Air.
•Fixed issue with "stop pattern" on Spectra Pro cameras.
•Fixed Camera orientation problem for VxPro EVO camera in landscape mode in iPad Mini.
•Updated the host names for Demo systems and removed Endura Demo system from system listing.
3.2.4
2017年11月14日
Bug fix release to fix the crash for iOS 11.
3.2.3
2017年08月24日
Bug fix release.
3.2.2
2017年08月01日
Bug Fix:
1. IOS Pelco Mobile wont connect to DS systems after updating to 3.2.1
1. IOS Pelco Mobile wont connect to DS systems after updating to 3.2.1
3.2.1
2017年06月29日
1. Added Support for VideoXpert Professional Systems
2. Bug Fixes
2. Bug Fixes
3.1.7
2017年02月22日
Added digital zooming support for non PTZ camera
Pelco EVO camera support
Added support for triggering camera Presets & Patterns
VideoXpert: Added support for video Bookmarking
VideoXpert: Added support for viewing/acknowledging Events
Bug Fixes
Pelco EVO camera support
Added support for triggering camera Presets & Patterns
VideoXpert: Added support for video Bookmarking
VideoXpert: Added support for viewing/acknowledging Events
Bug Fixes
3.1.2
2016年04月29日
Changed the VideoXpert demo system IP address.
3.1.1
2016年04月11日
Corrected an issue causing the app to crash when controlling Optera cameras
Added the VideoXpert Demo system.
Added the VideoXpert Demo system.
3.1
2016年04月01日
1. VideoXpert Ultimate: Added Support for VideoXpert Ultimate Systems. ENT Systems appear as the children of ULT system on the System List.
2. Optera Support: Integrated Optera 180/270/360 with Mobile App. Live and PTZ are supported with this version.
3. UI Improvements: VideoXpert UI Theme added.
4. Bug Fixes
5. iOS 9 support added.
6. Tag search support added for VideoXpert Systems.
2. Optera Support: Integrated Optera 180/270/360 with Mobile App. Live and PTZ are supported with this version.
3. UI Improvements: VideoXpert UI Theme added.
4. Bug Fixes
5. iOS 9 support added.
6. Tag search support added for VideoXpert Systems.
2.4.0
2015年07月14日
What’s New in Version 2.4
● Enabled support for VideoXpert 1.6, including MJPEG support, tags and aggregation
● Fixed issue when trying to connect to IP110, IP3701, and Spectra Mini IP cameras
● Several bug fixes
● Enabled support for VideoXpert 1.6, including MJPEG support, tags and aggregation
● Fixed issue when trying to connect to IP110, IP3701, and Spectra Mini IP cameras
● Several bug fixes
2.3.0
2015年03月30日
● Enabled support for DigitalSentry version 7.8
● Enabled support for iPhone 6 and 6 Plus
● Bug fixes
● Enabled support for iPhone 6 and 6 Plus
● Bug fixes
2.2.0
2014年04月22日
● Enabled support for SM5200 version 1.5 and later
● Enabled support for Pelco Aggregation version 2.0 and later
● Enabled support for Pelco Aggregation version 2.0 and later
Pelco Mobile™ FAQ
ここをクリック！地理的に制限されているアプリのダウンロード方法をご参考ください。
次のリストをチェックして、Pelco Mobile™の最低システム要件をご確認ください。
iPhone
iOS 12.0以降が必要です。
iPad
iPadOS 12.0以降が必要です。
iPod touch
iOS 12.0以降が必要です。
Pelco Mobile™は次の言語がサポートされています。 アラビア語, フランス語, 英語
