Easy Control
무료
2.0for iPhone, iPad and more
8.9
2 Ratings
Sennheiser electronic GmbH & Co. KG
Developer
1.2MB
Size
Dec 11, 2018
Update Date
Utilities
Category
4+
Age Rating
Age Rating
Easy Control 스크린 샷
About Easy Control
Sennheiser Easy Control (v2.0)
Sennheiser Easy Control turns your iPhone or iPad into an intuitive wireless LAN media control unit for Sennheiser´s AND conference system.
Sennheiser Easy Control is programmed directly for your iPhone/iPad and gives you remote access to the most often used commands and information. You only have to type in the Sennheiser device’s IP address and are ready to start.
FEATURES
- Control your Sennheiser ADN wired and wireless units directly from your iPhone/iPad.
- No additional software required.
- Communicates via TCP/IP Protocol
- Works in portrait and landscape mode.
- Supports the Retina display.
- ADN features
- Direct access to up to 25 ADN conference units
- Adjust the floor volume or mute all units
- Start and stop USB recording
- Select a conference mode (Direct Access, Override, Request, PTT)
- Set the mic limit
- De-/activate XLR in and out
- Toggle XLR Mix Minus
NOTE: Sennheiser Easy Control works only with the Sennheiser devices indicated above and requires a wifi-connection between your iPhone/iPad and the Sennheiser devices.
Please attention to these requirements before downloading this product.
Explanations and information on the settings can be found in the user manual of your Sennheiser devices.
Please note that the Sennheiser Easy Control app offers only limited control and monitoring functionality. If you want access to more control possibilities of the Sennheiser devices, please consider using terminal apps which are offered by several companies (e.g. “Mote”) or media control units offered by Crestron, AMX etc.
If you have any questions about technical details on the above mentioned products or if you need contact details of Sennheiser sales companies, please visit our website: www.sennheiser.com
Sennheiser Easy Control turns your iPhone or iPad into an intuitive wireless LAN media control unit for Sennheiser´s AND conference system.
Sennheiser Easy Control is programmed directly for your iPhone/iPad and gives you remote access to the most often used commands and information. You only have to type in the Sennheiser device’s IP address and are ready to start.
FEATURES
- Control your Sennheiser ADN wired and wireless units directly from your iPhone/iPad.
- No additional software required.
- Communicates via TCP/IP Protocol
- Works in portrait and landscape mode.
- Supports the Retina display.
- ADN features
- Direct access to up to 25 ADN conference units
- Adjust the floor volume or mute all units
- Start and stop USB recording
- Select a conference mode (Direct Access, Override, Request, PTT)
- Set the mic limit
- De-/activate XLR in and out
- Toggle XLR Mix Minus
NOTE: Sennheiser Easy Control works only with the Sennheiser devices indicated above and requires a wifi-connection between your iPhone/iPad and the Sennheiser devices.
Please attention to these requirements before downloading this product.
Explanations and information on the settings can be found in the user manual of your Sennheiser devices.
Please note that the Sennheiser Easy Control app offers only limited control and monitoring functionality. If you want access to more control possibilities of the Sennheiser devices, please consider using terminal apps which are offered by several companies (e.g. “Mote”) or media control units offered by Crestron, AMX etc.
If you have any questions about technical details on the above mentioned products or if you need contact details of Sennheiser sales companies, please visit our website: www.sennheiser.com
Show More
최신 버전 2.0의 새로운 기능
Last updated on Dec 11, 2018
오래된 버전
- Complete design update and new app icon
- iOS 11 + 12 compatibility
- Support for wireless mics removed (please use Sennheiser WSM software)
- iOS 11 + 12 compatibility
- Support for wireless mics removed (please use Sennheiser WSM software)
Show More
Version History
2.0
Dec 11, 2018
- Complete design update and new app icon
- iOS 11 + 12 compatibility
- Support for wireless mics removed (please use Sennheiser WSM software)
- iOS 11 + 12 compatibility
- Support for wireless mics removed (please use Sennheiser WSM software)
1.2
Apr 14, 2015
- design update and iOS 7 & 8 compatibility
- supports up to 25 conference units
- supports XLR input sensitivity control
- supports up to 25 conference units
- supports XLR input sensitivity control
1.1
Jul 31, 2012
Support for retina display iPad
1.0
Feb 2, 2012
Easy Control FAQ
제한된 국가 또는 지역에서 Easy Control를 다운로드하는 방법을 알아보려면 여기를 클릭하십시오.
Easy Control의 최소 요구 사항을 보려면 다음 목록을 확인하십시오.
iPhone
iOS 11.0 이상 필요.
iPad
iPadOS 11.0 이상 필요.
iPod touch
iOS 11.0 이상 필요.
Easy Control은 다음 언어를 지원합니다. 영어