Fixturlaser Laser Kit
무료
1.2.0for iPhone, iPad and more
Age Rating
Fixturlaser Laser Kit 스크린 샷
About Fixturlaser Laser Kit
This is a companion app for performing shaft alignment, using the Fixturlaser Laser Kit, on typical applications such as a motor and a pump. The app guides the user through the complete measurement and alignment process when using the Bluetooth® connected Fixturlaser Laser Kit measurement heads. Together this simplifies the otherwise cumbersome tasks such as calculations and determination of directions and the amount to move the machine to achieve a perfect alignment. Shaft alignment has never been easier.
---- Note: This app works only with the Fixturlaser Laser Kit ----
Key Features:
- Connected using Bluetooth®. Requires Bluetooth 4.0
- Intuitive user interface, all symbols and graphics – no text
- Work with either metric or imperial dimensions (mm or inch)
- Automatic pairing with the Fixturlaser Laser Kit measurement heads
- VertiZontal™: adjust the machine both vertically and horizontally without re-measuring
- Saves the measurement result to your camera roll
Visit the website www.alignmentknowledge.com for more information on alignment in general, the Fixturlaser Laser Kit and support of the app.
---- Note: This app works only with the Fixturlaser Laser Kit ----
Key Features:
- Connected using Bluetooth®. Requires Bluetooth 4.0
- Intuitive user interface, all symbols and graphics – no text
- Work with either metric or imperial dimensions (mm or inch)
- Automatic pairing with the Fixturlaser Laser Kit measurement heads
- VertiZontal™: adjust the machine both vertically and horizontally without re-measuring
- Saves the measurement result to your camera roll
Visit the website www.alignmentknowledge.com for more information on alignment in general, the Fixturlaser Laser Kit and support of the app.
Show More
최신 버전 1.2.0의 새로운 기능
Last updated on Apr 4, 2017
오래된 버전
This app has been updated by Apple to display the Apple Watch app icon.
We have added a few more functions to the app.
Laser Kit Soft foot function
- We recommend that the system is warmed up for 10 minutes before starting measuring for the best result.
- Start the soft foot function
- Wait for the Adaptiv Soft Foot filtering to finish and values for the feet is displayed.
- Loosen the bolt of the foot indicated, wait approximately 5 seconds for the machine and the foot value to stabilize, and fasten the bolt.
- Repeat the two steps above for all four feet of the machine.
- The results of the soft foot measurement is displayed. If you want to store it for reference take a screenshot.
Live adjustment in the vertical direction
- Go to the live adjustment and position the sensor units at 12 o’clock.
Disable the inclinometers
- Untick the inclinometer box in the tools menu.
- You can now use the system vertically or on slant beds.
- Live values for adjustment will be shown in all directions, showing the error corresponding to the position of the sensor units.
You will find more information on www.alignmentknowledge.com
We have added a few more functions to the app.
Laser Kit Soft foot function
- We recommend that the system is warmed up for 10 minutes before starting measuring for the best result.
- Start the soft foot function
- Wait for the Adaptiv Soft Foot filtering to finish and values for the feet is displayed.
- Loosen the bolt of the foot indicated, wait approximately 5 seconds for the machine and the foot value to stabilize, and fasten the bolt.
- Repeat the two steps above for all four feet of the machine.
- The results of the soft foot measurement is displayed. If you want to store it for reference take a screenshot.
Live adjustment in the vertical direction
- Go to the live adjustment and position the sensor units at 12 o’clock.
Disable the inclinometers
- Untick the inclinometer box in the tools menu.
- You can now use the system vertically or on slant beds.
- Live values for adjustment will be shown in all directions, showing the error corresponding to the position of the sensor units.
You will find more information on www.alignmentknowledge.com
Show More
Version History
1.2.0
Apr 4, 2017
This app has been updated by Apple to display the Apple Watch app icon.
We have added a few more functions to the app.
Laser Kit Soft foot function
- We recommend that the system is warmed up for 10 minutes before starting measuring for the best result.
- Start the soft foot function
- Wait for the Adaptiv Soft Foot filtering to finish and values for the feet is displayed.
- Loosen the bolt of the foot indicated, wait approximately 5 seconds for the machine and the foot value to stabilize, and fasten the bolt.
- Repeat the two steps above for all four feet of the machine.
- The results of the soft foot measurement is displayed. If you want to store it for reference take a screenshot.
Live adjustment in the vertical direction
- Go to the live adjustment and position the sensor units at 12 o’clock.
Disable the inclinometers
- Untick the inclinometer box in the tools menu.
- You can now use the system vertically or on slant beds.
- Live values for adjustment will be shown in all directions, showing the error corresponding to the position of the sensor units.
You will find more information on www.alignmentknowledge.com
We have added a few more functions to the app.
Laser Kit Soft foot function
- We recommend that the system is warmed up for 10 minutes before starting measuring for the best result.
- Start the soft foot function
- Wait for the Adaptiv Soft Foot filtering to finish and values for the feet is displayed.
- Loosen the bolt of the foot indicated, wait approximately 5 seconds for the machine and the foot value to stabilize, and fasten the bolt.
- Repeat the two steps above for all four feet of the machine.
- The results of the soft foot measurement is displayed. If you want to store it for reference take a screenshot.
Live adjustment in the vertical direction
- Go to the live adjustment and position the sensor units at 12 o’clock.
Disable the inclinometers
- Untick the inclinometer box in the tools menu.
- You can now use the system vertically or on slant beds.
- Live values for adjustment will be shown in all directions, showing the error corresponding to the position of the sensor units.
You will find more information on www.alignmentknowledge.com
1.1.2
Dec 20, 2016
- Bug fixes
- Improved graphics
- Improved graphics
1.1.1
Jun 23, 2016
- Bug fixes
- Improved Bluetooth stability
- Improved Bluetooth stability
1.1.0
Apr 15, 2016
- Bug fixes
- Improved Bluetooth stability
- Improved Bluetooth stability
0.9.3
Oct 12, 2015
- Bugfixes
- iOS9 compatibility
- iOS9 compatibility
0.9.1
Jun 10, 2015
Fixturlaser Laser Kit FAQ
제한된 국가 또는 지역에서 Fixturlaser Laser Kit를 다운로드하는 방법을 알아보려면 여기를 클릭하십시오.
Fixturlaser Laser Kit의 최소 요구 사항을 보려면 다음 목록을 확인하십시오.
iPhone
iOS 7.0 이상 필요.
iPad
iPadOS 7.0 이상 필요.
iPod touch
iOS 7.0 이상 필요.
Fixturlaser Laser Kit은 다음 언어를 지원합니다. 영어
