PhotoSync – 사진 및 동영상 전송과 백업
컴퓨터, NAS, 클라우드, 사진 서비스로
무료Offers In-App Purchases
4.8.2for iPhone, iPad and more
9.5
1K+ Ratings
touchbyte GmbH
Developer
124.8MB
Size
Dec 1, 2023
Update Date
Photo & Video
Category
4+
Age Rating
Age Rating
PhotoSync – 사진 및 동영상 전송과 백업 스크린 샷
About PhotoSync – 사진 및 동영상 전송과 백업
** 모바일 장치, Windows 및 Mac용 기본 앱이 포함된 교차 플랫폼 솔루션입니다. 리눅스에서도 작동
** 안정적이고 안전한 소프트웨어 – 시장에서12 년 이상 운영되고 지속적으로 업데이트
** 제한 사항 없음 - 전송 및 사진 및 비디오의 무제한 수를 백업. HEIC 및 RAW 지원을 통한 전체 해상도 전송; 모든 메타 데이터 (EXIF, GPS)가 보존됩니다
** 유연함: 대상 장치에서 녹음 날짜, 미디어 유형, 앨범 이름 및 메타데이터별로 파일을 자동으로 폴더로 구성합니다. 사용자 정의 가능한 파일 이름
** 클라우드 및 iTunes와 완전히 독립하십시오!
** MDM을 통한 또는 설정 파일을 사용하여 관리되는 앱 구성 (config.photosync-app.com)
—— 주요 특징 ——
컴퓨터로 /에서 전송
• iPhone / iPad에서 Windows PC 또는 Mac으로 사진 및 비디오를 직접 전송/백업합니다. 사진 및 비디오는 모든 메타데이터와 함께 전체 해상도로 로컬 Wi-Fi 네트워크를 통해 직접 전송됩니다. 인터넷이나 클라우드가 필요하지 않습니다.
• Wi-Fi를 통해 Windows PC 또는 Mac에서 iPhone / iPad로 사진 및 비디오를 보냅니다. 받은 사진 및 비디오를 카메라 롤 또는 사용자가 정의한 앨범으로 직접 가져옵니다.
휴대 전화와 태블릿 간 전송
• Wi-Fi, Bluetooth 또는 Personal Hotspot을 통해 장치 간에 사진 및 비디오를 직접 전송합니다. 컴퓨터, 인터넷 또는 클라우드가 필요하지 않습니다.
NAS, 클라우드 및 사진 서비스로 /로부터 전송
• FTP, SMB, WebDAV 및 SFTP를 통해 NAS 장치, 홈 클라우드 및 무선 휴대용 하드 드라이브에 사진 및 비디오를 백업합니다. PhotoSync는 Synology, QNAP, Buffalo NAS, ownCloud, NextCloud, WD MyCloud, TrueNAS, OpenMediaVault, Seagate Personal Cloud와 완벽하게 호환됩니다.
• 파일 앱 (iOS13)을 통해 사진 및 비디오를 USB 드라이브, iCloud Drive 및 로컬 스토리지로 /로부터 백업.
• Dropbox, Google Drive, Google Photos, Flickr, OneDrive, SmugMug, Box, Zenfolio, PhotoPrism, InfiniCLOUD, pCloud 및 SugarSync를 포함한 인기있는 클라우드 및 사진 서비스에 사진 및 비디오를 업로드합니다.
• 장치, 서비스 및 NAS 간에 직접 사진과 비디오를 전송합니다(예: OneDrive에서 SMB로).
전체 기능 목록을 보려면 photosync-app.com/home을 방문하십시오.
제한 사항
무료 버전의 PhotoSync를 사용하면 전송 기능을 완전히 테스트 할 수 있습니다. 그러나 사진 및 비디오는 저품질로 전송됩니다. RAW 및 HEIC 사진은 JPEG로 변환됩니다. 앱 내에서 한 번만 구매하면 PhotoSync Pro로 업그레이드하여 이러한 제한을 제거 할 수 있습니다.
—— 프리미엄 기능 ——
PhotoSync Premium 사용자가 사용할 수있는 독점 기능 :
자동 전송
미리 선택한 위치에 도착하거나 장치를 충전할 때마다 백그라운드에서 새 사진 및 비디오를 컴퓨터, NAS 또는 지원되는 클라우드 서비스로 자동 전송합니다.
PhotoSync 카메라
내장 PhotoSync 카메라로 사진을 찍고 즉시 지원되는 대상으로 전송하십시오. AirPlay / HDMI를 통한 사진 부스 지원.
고급 Siri 지원 및 워크 플로우
Siri Actions“클립 보드에서 전송”및“새로운 사진 / 비디오 전송”을 사용하여 강력한 워크 플로우를 구축하십시오. 가능성은 무한합니다!
클라이언트 측 암호화 – 사진 및 비디오 보호
NAS 및 파일 기반 클라우드 서비스에 안전하게 저장하기 위해 전송하기 전에 사진 및 비디오를 암호화하십시오!
카메라 지원(Wi-Fi 및 USB)
Canon, Nikon, Sony, Fujifilm, Olympus 및 Lumix 카메라 및 WiFi 또는 USB를 통해 연결된 카메라에서 다운로드합니다. (무선) Airplay 및 HDMI를 통한 테더링 및 사진 부스 지원.
Amazon S3, Backblaze및 Wasabi
Amazon S3로 백업하고 Amazon S3에 저장된 사진 및 비디오를 다운로드하여 봅니다. Backblaze 및 Wasabi도 지원합니다!
SanDisk iXpand USB 드라이브 지원
iXpand USB 드라이브에 사진 및 비디오를 백업하고 장치 공간을 확보하십시오. iXpand USB 드라이브에서 사진 / 비디오를 다운로드하고 봅니다. 여행시 오프라인에서도 작동합니다.
Wi-Fi SD 카드 지원
Toshiba Flashair 및 Transcend Wi-Fi SD 카드에서 사진, 비디오 및 RAW를 다운로드하십시오.
전체 기능 목록을 보려면 premium.photosync-app.com을 방문하십시오.
프리미엄 기능에는 추가 구매(일회성 구매 또는 무료 평가판 구독)가 필요합니다.
법률상의
각 구독 기간과 가격은 구입시 PhotoSync 앱에 표시됩니다. 구매 확인시 iTunes 계정으로 요금이 청구됩니다. 현재 기간이 종료되기 최소 24 시간 전에 자동 갱신을 해제하지 않으면 구독이 자동으로 갱신됩니다. 구독 및 자동 갱신은 iTunes 계정 설정에서 관리하거나 끌 수 있습니다. 무료 평가판의 사용하지 않은 부분은 구독을 구매하자마자 만료됩니다.
이용 약관 : https://bit.ly/33KFb1G
개인 정보 보호 정책: https://bit.ly/30gkaKd
** 안정적이고 안전한 소프트웨어 – 시장에서12 년 이상 운영되고 지속적으로 업데이트
** 제한 사항 없음 - 전송 및 사진 및 비디오의 무제한 수를 백업. HEIC 및 RAW 지원을 통한 전체 해상도 전송; 모든 메타 데이터 (EXIF, GPS)가 보존됩니다
** 유연함: 대상 장치에서 녹음 날짜, 미디어 유형, 앨범 이름 및 메타데이터별로 파일을 자동으로 폴더로 구성합니다. 사용자 정의 가능한 파일 이름
** 클라우드 및 iTunes와 완전히 독립하십시오!
** MDM을 통한 또는 설정 파일을 사용하여 관리되는 앱 구성 (config.photosync-app.com)
—— 주요 특징 ——
컴퓨터로 /에서 전송
• iPhone / iPad에서 Windows PC 또는 Mac으로 사진 및 비디오를 직접 전송/백업합니다. 사진 및 비디오는 모든 메타데이터와 함께 전체 해상도로 로컬 Wi-Fi 네트워크를 통해 직접 전송됩니다. 인터넷이나 클라우드가 필요하지 않습니다.
• Wi-Fi를 통해 Windows PC 또는 Mac에서 iPhone / iPad로 사진 및 비디오를 보냅니다. 받은 사진 및 비디오를 카메라 롤 또는 사용자가 정의한 앨범으로 직접 가져옵니다.
휴대 전화와 태블릿 간 전송
• Wi-Fi, Bluetooth 또는 Personal Hotspot을 통해 장치 간에 사진 및 비디오를 직접 전송합니다. 컴퓨터, 인터넷 또는 클라우드가 필요하지 않습니다.
NAS, 클라우드 및 사진 서비스로 /로부터 전송
• FTP, SMB, WebDAV 및 SFTP를 통해 NAS 장치, 홈 클라우드 및 무선 휴대용 하드 드라이브에 사진 및 비디오를 백업합니다. PhotoSync는 Synology, QNAP, Buffalo NAS, ownCloud, NextCloud, WD MyCloud, TrueNAS, OpenMediaVault, Seagate Personal Cloud와 완벽하게 호환됩니다.
• 파일 앱 (iOS13)을 통해 사진 및 비디오를 USB 드라이브, iCloud Drive 및 로컬 스토리지로 /로부터 백업.
• Dropbox, Google Drive, Google Photos, Flickr, OneDrive, SmugMug, Box, Zenfolio, PhotoPrism, InfiniCLOUD, pCloud 및 SugarSync를 포함한 인기있는 클라우드 및 사진 서비스에 사진 및 비디오를 업로드합니다.
• 장치, 서비스 및 NAS 간에 직접 사진과 비디오를 전송합니다(예: OneDrive에서 SMB로).
전체 기능 목록을 보려면 photosync-app.com/home을 방문하십시오.
제한 사항
무료 버전의 PhotoSync를 사용하면 전송 기능을 완전히 테스트 할 수 있습니다. 그러나 사진 및 비디오는 저품질로 전송됩니다. RAW 및 HEIC 사진은 JPEG로 변환됩니다. 앱 내에서 한 번만 구매하면 PhotoSync Pro로 업그레이드하여 이러한 제한을 제거 할 수 있습니다.
—— 프리미엄 기능 ——
PhotoSync Premium 사용자가 사용할 수있는 독점 기능 :
자동 전송
미리 선택한 위치에 도착하거나 장치를 충전할 때마다 백그라운드에서 새 사진 및 비디오를 컴퓨터, NAS 또는 지원되는 클라우드 서비스로 자동 전송합니다.
PhotoSync 카메라
내장 PhotoSync 카메라로 사진을 찍고 즉시 지원되는 대상으로 전송하십시오. AirPlay / HDMI를 통한 사진 부스 지원.
고급 Siri 지원 및 워크 플로우
Siri Actions“클립 보드에서 전송”및“새로운 사진 / 비디오 전송”을 사용하여 강력한 워크 플로우를 구축하십시오. 가능성은 무한합니다!
클라이언트 측 암호화 – 사진 및 비디오 보호
NAS 및 파일 기반 클라우드 서비스에 안전하게 저장하기 위해 전송하기 전에 사진 및 비디오를 암호화하십시오!
카메라 지원(Wi-Fi 및 USB)
Canon, Nikon, Sony, Fujifilm, Olympus 및 Lumix 카메라 및 WiFi 또는 USB를 통해 연결된 카메라에서 다운로드합니다. (무선) Airplay 및 HDMI를 통한 테더링 및 사진 부스 지원.
Amazon S3, Backblaze및 Wasabi
Amazon S3로 백업하고 Amazon S3에 저장된 사진 및 비디오를 다운로드하여 봅니다. Backblaze 및 Wasabi도 지원합니다!
SanDisk iXpand USB 드라이브 지원
iXpand USB 드라이브에 사진 및 비디오를 백업하고 장치 공간을 확보하십시오. iXpand USB 드라이브에서 사진 / 비디오를 다운로드하고 봅니다. 여행시 오프라인에서도 작동합니다.
Wi-Fi SD 카드 지원
Toshiba Flashair 및 Transcend Wi-Fi SD 카드에서 사진, 비디오 및 RAW를 다운로드하십시오.
전체 기능 목록을 보려면 premium.photosync-app.com을 방문하십시오.
프리미엄 기능에는 추가 구매(일회성 구매 또는 무료 평가판 구독)가 필요합니다.
법률상의
각 구독 기간과 가격은 구입시 PhotoSync 앱에 표시됩니다. 구매 확인시 iTunes 계정으로 요금이 청구됩니다. 현재 기간이 종료되기 최소 24 시간 전에 자동 갱신을 해제하지 않으면 구독이 자동으로 갱신됩니다. 구독 및 자동 갱신은 iTunes 계정 설정에서 관리하거나 끌 수 있습니다. 무료 평가판의 사용하지 않은 부분은 구독을 구매하자마자 만료됩니다.
이용 약관 : https://bit.ly/33KFb1G
개인 정보 보호 정책: https://bit.ly/30gkaKd
Show More
최신 버전 4.8.2의 새로운 기능
Last updated on Dec 1, 2023
오래된 버전
- New: For services with mulitple configurations (e.g. SMB, FTP, S3) the order of the configurations can now be changed
- New: When uploading to S3 & Wasabi PhotoSync now sets the "X-Amz-Meta-Mtime" header to the recording date of the photo & video. This header can also be interpreted by many 3rd party applications.
When enabling the new option "Query Recording date" PhotoSync will use this information to enable sorting by recording date when browsing photos & videos on S3 & Wasabi. Note: Enabling this option may slow down performance as it requires an additional query for each photo/video.
- New: When uploading to Backblaze, PhotoSync now sets the "X-Bz-Info-src_last_modified_millis" to the recording date of the photo & videos. This information is now also used when browsing Backblaze in PhotoSync, allowing sorting by recording date.
- Fixed: Issues with encrypted video uploads to S3, Wasabi and Backblaze. We recommend re-uploading these videos to an encrypted S3, Wasabi or Backblaze destination.
- Fixed: Wrong extension for XMP sidecar files, when "Keep original names" was enabled in "Expert Settings"
- Fixed: Videos were not recorded for more than 12 seconds in some cases when using the PhotoSync camera
- Fixed: PhotoSync now ignores when a USB or Wi-Fi camera disconnects (or goes to sleep) while a transfer is in progress
- Fixed: Transfers to SMB could result in error 22 in rare cases (e.g. when the target volume is exFAT formatted and mounted with fuse)
- Improved thumbnail loading performance for S3 based services
New in Version 4.8
-------------------
- New: Client-Side Encryption (Premium)
Encrypt photos & videos before transfer and store them encrypted on NAS and file-based cloud services. Browse and view encrypted photos & videos directly in PhotoSync.
Rclone and OpenSSL are supported, enabling easy workflow integration and seamless decryption on PC and Mac.
- New: Improved metadata support
Embedding metadata is now supported without re-encoding for most file types. PhotoSync can now also embed modified recording dates and tag photos / videos based on user album name, Moments / location name or media type.
- New: XMP support
XMP sidecar files containing all metadata information can now be transferred. This feature is optimal for integration into professional workflows. Configurable options: XMP files are always transferred; only for photos with edited metadata; only for RAW files with edited metadata; or never.
- New: "Display" option to detect modified / edited photos & videos as new: If you edit a photo or video after it has been transferred, PhotoSync will detect the photos / videos as new and the edited version will be re-transferred. This setting can be enabled under "Display Options" (iOS 16 and later).
- New: PhotoSync can now retain the whole album / folder structure when transferring between iOS devices. To enable this feature enable "Keep Album Structure (iOS only)" under Configure->Phone/Tablet. Preserving the favorite status and location info is supported when transferring between iOS devices.
- New: The PhotoSync Camera can now embed copyright info
- New: Added an option "Set transfer time/date only once" for sub-directory creation. This way only one sub-directory is created for every transfer session.
- New: Added a new custom format %SP for custom sub-directory creation based on media type (Live Photo, Screenshots...)
- New: Added new custom formats %MOT and %MOL to add the Moments title and Moments location into the file name or sub-directory name
- New: Added an option "Assign Live Photo MOV to photo folder" for sub-directory creation. When enabling this option both files of a Live Photo are stored in the photos folder, when the %2P or %3P format is used.
- New: Added option "Upload in Chunks" for WebDAV connections. This option is helpful e.g. for WebDAV servers proxied by CloudFare
- New: Added host key checks for SFTP connection
- New: Added an option to convert ProRes Videos to H264 or HEVC
- New: When uploading to S3 & Wasabi PhotoSync now sets the "X-Amz-Meta-Mtime" header to the recording date of the photo & video. This header can also be interpreted by many 3rd party applications.
When enabling the new option "Query Recording date" PhotoSync will use this information to enable sorting by recording date when browsing photos & videos on S3 & Wasabi. Note: Enabling this option may slow down performance as it requires an additional query for each photo/video.
- New: When uploading to Backblaze, PhotoSync now sets the "X-Bz-Info-src_last_modified_millis" to the recording date of the photo & videos. This information is now also used when browsing Backblaze in PhotoSync, allowing sorting by recording date.
- Fixed: Issues with encrypted video uploads to S3, Wasabi and Backblaze. We recommend re-uploading these videos to an encrypted S3, Wasabi or Backblaze destination.
- Fixed: Wrong extension for XMP sidecar files, when "Keep original names" was enabled in "Expert Settings"
- Fixed: Videos were not recorded for more than 12 seconds in some cases when using the PhotoSync camera
- Fixed: PhotoSync now ignores when a USB or Wi-Fi camera disconnects (or goes to sleep) while a transfer is in progress
- Fixed: Transfers to SMB could result in error 22 in rare cases (e.g. when the target volume is exFAT formatted and mounted with fuse)
- Improved thumbnail loading performance for S3 based services
New in Version 4.8
-------------------
- New: Client-Side Encryption (Premium)
Encrypt photos & videos before transfer and store them encrypted on NAS and file-based cloud services. Browse and view encrypted photos & videos directly in PhotoSync.
Rclone and OpenSSL are supported, enabling easy workflow integration and seamless decryption on PC and Mac.
- New: Improved metadata support
Embedding metadata is now supported without re-encoding for most file types. PhotoSync can now also embed modified recording dates and tag photos / videos based on user album name, Moments / location name or media type.
- New: XMP support
XMP sidecar files containing all metadata information can now be transferred. This feature is optimal for integration into professional workflows. Configurable options: XMP files are always transferred; only for photos with edited metadata; only for RAW files with edited metadata; or never.
- New: "Display" option to detect modified / edited photos & videos as new: If you edit a photo or video after it has been transferred, PhotoSync will detect the photos / videos as new and the edited version will be re-transferred. This setting can be enabled under "Display Options" (iOS 16 and later).
- New: PhotoSync can now retain the whole album / folder structure when transferring between iOS devices. To enable this feature enable "Keep Album Structure (iOS only)" under Configure->Phone/Tablet. Preserving the favorite status and location info is supported when transferring between iOS devices.
- New: The PhotoSync Camera can now embed copyright info
- New: Added an option "Set transfer time/date only once" for sub-directory creation. This way only one sub-directory is created for every transfer session.
- New: Added a new custom format %SP for custom sub-directory creation based on media type (Live Photo, Screenshots...)
- New: Added new custom formats %MOT and %MOL to add the Moments title and Moments location into the file name or sub-directory name
- New: Added an option "Assign Live Photo MOV to photo folder" for sub-directory creation. When enabling this option both files of a Live Photo are stored in the photos folder, when the %2P or %3P format is used.
- New: Added option "Upload in Chunks" for WebDAV connections. This option is helpful e.g. for WebDAV servers proxied by CloudFare
- New: Added host key checks for SFTP connection
- New: Added an option to convert ProRes Videos to H264 or HEVC
Show More
Version History
4.8.2
Dec 1, 2023
- New: For services with mulitple configurations (e.g. SMB, FTP, S3) the order of the configurations can now be changed
- New: When uploading to S3 & Wasabi PhotoSync now sets the "X-Amz-Meta-Mtime" header to the recording date of the photo & video. This header can also be interpreted by many 3rd party applications.
When enabling the new option "Query Recording date" PhotoSync will use this information to enable sorting by recording date when browsing photos & videos on S3 & Wasabi. Note: Enabling this option may slow down performance as it requires an additional query for each photo/video.
- New: When uploading to Backblaze, PhotoSync now sets the "X-Bz-Info-src_last_modified_millis" to the recording date of the photo & videos. This information is now also used when browsing Backblaze in PhotoSync, allowing sorting by recording date.
- Fixed: Issues with encrypted video uploads to S3, Wasabi and Backblaze. We recommend re-uploading these videos to an encrypted S3, Wasabi or Backblaze destination.
- Fixed: Wrong extension for XMP sidecar files, when "Keep original names" was enabled in "Expert Settings"
- Fixed: Videos were not recorded for more than 12 seconds in some cases when using the PhotoSync camera
- Fixed: PhotoSync now ignores when a USB or Wi-Fi camera disconnects (or goes to sleep) while a transfer is in progress
- Fixed: Transfers to SMB could result in error 22 in rare cases (e.g. when the target volume is exFAT formatted and mounted with fuse)
- Improved thumbnail loading performance for S3 based services
New in Version 4.8
-------------------
- New: Client-Side Encryption (Premium)
Encrypt photos & videos before transfer and store them encrypted on NAS and file-based cloud services. Browse and view encrypted photos & videos directly in PhotoSync.
Rclone and OpenSSL are supported, enabling easy workflow integration and seamless decryption on PC and Mac.
- New: Improved metadata support
Embedding metadata is now supported without re-encoding for most file types. PhotoSync can now also embed modified recording dates and tag photos / videos based on user album name, Moments / location name or media type.
- New: XMP support
XMP sidecar files containing all metadata information can now be transferred. This feature is optimal for integration into professional workflows. Configurable options: XMP files are always transferred; only for photos with edited metadata; only for RAW files with edited metadata; or never.
- New: "Display" option to detect modified / edited photos & videos as new: If you edit a photo or video after it has been transferred, PhotoSync will detect the photos / videos as new and the edited version will be re-transferred. This setting can be enabled under "Display Options" (iOS 16 and later).
- New: PhotoSync can now retain the whole album / folder structure when transferring between iOS devices. To enable this feature enable "Keep Album Structure (iOS only)" under Configure->Phone/Tablet. Preserving the favorite status and location info is supported when transferring between iOS devices.
- New: The PhotoSync Camera can now embed copyright info
- New: Added an option "Set transfer time/date only once" for sub-directory creation. This way only one sub-directory is created for every transfer session.
- New: Added a new custom format %SP for custom sub-directory creation based on media type (Live Photo, Screenshots...)
- New: Added new custom formats %MOT and %MOL to add the Moments title and Moments location into the file name or sub-directory name
- New: Added an option "Assign Live Photo MOV to photo folder" for sub-directory creation. When enabling this option both files of a Live Photo are stored in the photos folder, when the %2P or %3P format is used.
- New: Added option "Upload in Chunks" for WebDAV connections. This option is helpful e.g. for WebDAV servers proxied by CloudFare
- New: Added host key checks for SFTP connection
- New: Added an option to convert ProRes Videos to H264 or HEVC
- New: When uploading to S3 & Wasabi PhotoSync now sets the "X-Amz-Meta-Mtime" header to the recording date of the photo & video. This header can also be interpreted by many 3rd party applications.
When enabling the new option "Query Recording date" PhotoSync will use this information to enable sorting by recording date when browsing photos & videos on S3 & Wasabi. Note: Enabling this option may slow down performance as it requires an additional query for each photo/video.
- New: When uploading to Backblaze, PhotoSync now sets the "X-Bz-Info-src_last_modified_millis" to the recording date of the photo & videos. This information is now also used when browsing Backblaze in PhotoSync, allowing sorting by recording date.
- Fixed: Issues with encrypted video uploads to S3, Wasabi and Backblaze. We recommend re-uploading these videos to an encrypted S3, Wasabi or Backblaze destination.
- Fixed: Wrong extension for XMP sidecar files, when "Keep original names" was enabled in "Expert Settings"
- Fixed: Videos were not recorded for more than 12 seconds in some cases when using the PhotoSync camera
- Fixed: PhotoSync now ignores when a USB or Wi-Fi camera disconnects (or goes to sleep) while a transfer is in progress
- Fixed: Transfers to SMB could result in error 22 in rare cases (e.g. when the target volume is exFAT formatted and mounted with fuse)
- Improved thumbnail loading performance for S3 based services
New in Version 4.8
-------------------
- New: Client-Side Encryption (Premium)
Encrypt photos & videos before transfer and store them encrypted on NAS and file-based cloud services. Browse and view encrypted photos & videos directly in PhotoSync.
Rclone and OpenSSL are supported, enabling easy workflow integration and seamless decryption on PC and Mac.
- New: Improved metadata support
Embedding metadata is now supported without re-encoding for most file types. PhotoSync can now also embed modified recording dates and tag photos / videos based on user album name, Moments / location name or media type.
- New: XMP support
XMP sidecar files containing all metadata information can now be transferred. This feature is optimal for integration into professional workflows. Configurable options: XMP files are always transferred; only for photos with edited metadata; only for RAW files with edited metadata; or never.
- New: "Display" option to detect modified / edited photos & videos as new: If you edit a photo or video after it has been transferred, PhotoSync will detect the photos / videos as new and the edited version will be re-transferred. This setting can be enabled under "Display Options" (iOS 16 and later).
- New: PhotoSync can now retain the whole album / folder structure when transferring between iOS devices. To enable this feature enable "Keep Album Structure (iOS only)" under Configure->Phone/Tablet. Preserving the favorite status and location info is supported when transferring between iOS devices.
- New: The PhotoSync Camera can now embed copyright info
- New: Added an option "Set transfer time/date only once" for sub-directory creation. This way only one sub-directory is created for every transfer session.
- New: Added a new custom format %SP for custom sub-directory creation based on media type (Live Photo, Screenshots...)
- New: Added new custom formats %MOT and %MOL to add the Moments title and Moments location into the file name or sub-directory name
- New: Added an option "Assign Live Photo MOV to photo folder" for sub-directory creation. When enabling this option both files of a Live Photo are stored in the photos folder, when the %2P or %3P format is used.
- New: Added option "Upload in Chunks" for WebDAV connections. This option is helpful e.g. for WebDAV servers proxied by CloudFare
- New: Added host key checks for SFTP connection
- New: Added an option to convert ProRes Videos to H264 or HEVC
4.8.1
Nov 14, 2023
- Added: Additional MDM configuration options
- Fixed: Issues when transferring to other mobile devices
- Fixed: It was not possible to enter IPv6 addresses for SMB connections
- Fixed: When transferring to iOS devices, the receive counter was inaccurate in some cases
- Fixed: A rare crash that could occur when configuring the encryption Salt for Rclone
New in Version 4.8
-------------------
- New: Client-Side Encryption (Premium)
Encrypt photos & videos before transfer and store them encrypted on NAS and file-based cloud services. Browse and view encrypted photos & videos directly in PhotoSync.
Rclone and OpenSSL are supported, enabling easy workflow integration and seamless decryption on PC and Mac.
- New: Improved metadata support
Embedding metadata is now supported without re-encoding for most file types. PhotoSync can now also embed modified recording dates and tag photos / videos based on user album name, Moments / location name or media type.
- New: XMP support
XMP sidecar files containing all metadata information can now be transferred. This feature is optimal for integration into professional workflows. Configurable options: XMP files are always transferred; only for photos with edited metadata; only for RAW files with edited metadata; or never.
- New: "Display" option to detect modified / edited photos & videos as new: If you edit a photo or video after it has been transferred, PhotoSync will detect the photos / videos as new and the edited version will be re-transferred. This setting can be enabled under "Display Options" (iOS 16 and later).
- New: PhotoSync can now retain the whole album / folder structure when transferring between iOS devices. To enable this feature enable "Keep Album Structure (iOS only)" under Configure->Phone/Tablet. Preserving the favorite status and location info is supported when transferring between iOS devices.
- New: The PhotoSync Camera can now embed copyright info
- New: Added an option "Set transfer time/date only once" for sub-directory creation. This way only one sub-directory is created for every transfer session.
- New: Added a new custom format %SP for custom sub-directory creation based on media type (Live Photo, Screenshots...)
- New: Added new custom formats %MOT and %MOL to add the Moments title and Moments location into the file name or sub-directory name
- New: Added an option "Assign Live Photo MOV to photo folder" for sub-directory creation. When enabling this option both files of a Live Photo are stored in the photos folder, when the %2P or %3P format is used.
- New: Added option "Upload in Chunks" for WebDAV connections. This option is helpful e.g. for WebDAV servers proxied by CloudFare
- New: Added host key checks for SFTP connection
- New: Added an option to convert ProRes Videos to H264 or HEVC
- New: Option to set the "Modification" date on supported WebDAV servers in seconds or milliseconds
- New: Changed video container format to Quicktime for rendered Slo-mo videos
- New: Added an option to disable the Photobooth feature (HDMI & AirPlay) for the PhotoSync Camera
- New: HEIC->JPEG conversion is now supported when transferring between targets
- New: The preferences for video resizing are now also applied for the Sharing Extension, In-App Camera and Cross-Transfers
- Improved: SMB transfer performance of small photos / videos
- Improved: Detection of new photos & videos on iOS 17
- Fixed: Issues when transferring to other mobile devices
- Fixed: It was not possible to enter IPv6 addresses for SMB connections
- Fixed: When transferring to iOS devices, the receive counter was inaccurate in some cases
- Fixed: A rare crash that could occur when configuring the encryption Salt for Rclone
New in Version 4.8
-------------------
- New: Client-Side Encryption (Premium)
Encrypt photos & videos before transfer and store them encrypted on NAS and file-based cloud services. Browse and view encrypted photos & videos directly in PhotoSync.
Rclone and OpenSSL are supported, enabling easy workflow integration and seamless decryption on PC and Mac.
- New: Improved metadata support
Embedding metadata is now supported without re-encoding for most file types. PhotoSync can now also embed modified recording dates and tag photos / videos based on user album name, Moments / location name or media type.
- New: XMP support
XMP sidecar files containing all metadata information can now be transferred. This feature is optimal for integration into professional workflows. Configurable options: XMP files are always transferred; only for photos with edited metadata; only for RAW files with edited metadata; or never.
- New: "Display" option to detect modified / edited photos & videos as new: If you edit a photo or video after it has been transferred, PhotoSync will detect the photos / videos as new and the edited version will be re-transferred. This setting can be enabled under "Display Options" (iOS 16 and later).
- New: PhotoSync can now retain the whole album / folder structure when transferring between iOS devices. To enable this feature enable "Keep Album Structure (iOS only)" under Configure->Phone/Tablet. Preserving the favorite status and location info is supported when transferring between iOS devices.
- New: The PhotoSync Camera can now embed copyright info
- New: Added an option "Set transfer time/date only once" for sub-directory creation. This way only one sub-directory is created for every transfer session.
- New: Added a new custom format %SP for custom sub-directory creation based on media type (Live Photo, Screenshots...)
- New: Added new custom formats %MOT and %MOL to add the Moments title and Moments location into the file name or sub-directory name
- New: Added an option "Assign Live Photo MOV to photo folder" for sub-directory creation. When enabling this option both files of a Live Photo are stored in the photos folder, when the %2P or %3P format is used.
- New: Added option "Upload in Chunks" for WebDAV connections. This option is helpful e.g. for WebDAV servers proxied by CloudFare
- New: Added host key checks for SFTP connection
- New: Added an option to convert ProRes Videos to H264 or HEVC
- New: Option to set the "Modification" date on supported WebDAV servers in seconds or milliseconds
- New: Changed video container format to Quicktime for rendered Slo-mo videos
- New: Added an option to disable the Photobooth feature (HDMI & AirPlay) for the PhotoSync Camera
- New: HEIC->JPEG conversion is now supported when transferring between targets
- New: The preferences for video resizing are now also applied for the Sharing Extension, In-App Camera and Cross-Transfers
- Improved: SMB transfer performance of small photos / videos
- Improved: Detection of new photos & videos on iOS 17
4.8
Nov 8, 2023
- New: Client-Side Encryption (Premium)
Encrypt photos & videos before transfer and store them encrypted on NAS and file-based cloud services. Browse and view encrypted photos & videos directly in PhotoSync.
Rclone and OpenSSL are supported, enabling easy workflow integration and seamless decryption on PC and Mac.
- New: Improved metadata support
Embedding metadata is now supported without re-encoding for most file types. PhotoSync can now also embed modified recording dates and tag photos / videos based on user album name, Moments / location name or media type.
- New: XMP support
XMP sidecar files containing all metadata information can now be transferred. This feature is optimal for integration into professional workflows. Configurable options: XMP files are always transferred; only for photos with edited metadata; only for RAW files with edited metadata; or never.
- New: "Display" option to detect modified / edited photos & videos as new: If you edit a photo or video after it has been transferred, PhotoSync will detect the photos / videos as new and the edited version will be re-transferred. This setting can be enabled under "Display Options" (iOS 16 and later).
- New: PhotoSync can now retain the whole album / folder structure when transferring between iOS devices. To enable this feature enable "Keep Album Structure (iOS only)" under Configure->Phone/Tablet. Preserving the favorite status and location info is supported when transferring between iOS devices.
- New: The PhotoSync Camera can now embed copyright info
- New: Added an option "Set transfer time/date only once" for sub-directory creation. This way only one sub-directory is created for every transfer session.
- New: Added a new custom format %SP for custom sub-directory creation based on media type (Live Photo, Screenshots...)
- New: Added new custom formats %MOT and %MOL to add the Moments title and Moments location into the file name or sub-directory name
- New: Added an option "Assign Live Photo MOV to photo folder" for sub-directory creation. When enabling this option both files of a Live Photo are stored in the photos folder, when the %2P or %3P format is used.
- New: Added option "Upload in Chunks" for WebDAV connections. This option is helpful e.g. for WebDAV servers proxied by CloudFare
- New: Added host key checks for SFTP connection
- New: Added an option to convert ProRes Videos to H264 or HEVC
- New: Option to set the "Modification" date on supported WebDAV servers in seconds or milliseconds
- New: Changed video container format to Quicktime for rendered Slo-mo videos
- New: Added an option to disable the Photobooth feature (HDMI & AirPlay) for the PhotoSync Camera
- New: HEIC->JPEG conversion is now supported when transferring between targets
- New: The preferences for video resizing are now also applied for the Sharing Extension, In-App Camera and Cross-Transfers
- Improved: SMB transfer performance of small photos / videos
- Improved: Detection of new photos & videos on iOS 17
- Fixed: When the "Live effect" for a "Live Photo" was deactivated, an additional MOV / JPEG file was transferred
- Fixed: The caption of photos could not be read in some cases
- Fixed: In some cases the rendered version of a Slo-mo video was not transferred
- Fixed: Some screenshots were transferred as JPEG instead of PNG on iOS 16
- Fixed: AAE files sometimes had a non-matching file name
- Fixed: Added some additional error handling when assets have no data
- Fixed: For S3 uploads the mime type is now set correctly
- Fixed: Uploads to SmugMug were no longer working due to changes by SmugMug
- Fixed: A crash issue when transferring to the Files App target
- Fixed: Transfers to SmugMug, when "Select before transfer" is enabled
- Fixed: Improved FTP transfers from cameras
- Fixed: An issue that resulted in incorrect selections after deleting photo(s) (Moments view)
- Fixed: Several crash issues (thumbnail generation, missing mime types, transfers to Files App, Quick Transfer)
Encrypt photos & videos before transfer and store them encrypted on NAS and file-based cloud services. Browse and view encrypted photos & videos directly in PhotoSync.
Rclone and OpenSSL are supported, enabling easy workflow integration and seamless decryption on PC and Mac.
- New: Improved metadata support
Embedding metadata is now supported without re-encoding for most file types. PhotoSync can now also embed modified recording dates and tag photos / videos based on user album name, Moments / location name or media type.
- New: XMP support
XMP sidecar files containing all metadata information can now be transferred. This feature is optimal for integration into professional workflows. Configurable options: XMP files are always transferred; only for photos with edited metadata; only for RAW files with edited metadata; or never.
- New: "Display" option to detect modified / edited photos & videos as new: If you edit a photo or video after it has been transferred, PhotoSync will detect the photos / videos as new and the edited version will be re-transferred. This setting can be enabled under "Display Options" (iOS 16 and later).
- New: PhotoSync can now retain the whole album / folder structure when transferring between iOS devices. To enable this feature enable "Keep Album Structure (iOS only)" under Configure->Phone/Tablet. Preserving the favorite status and location info is supported when transferring between iOS devices.
- New: The PhotoSync Camera can now embed copyright info
- New: Added an option "Set transfer time/date only once" for sub-directory creation. This way only one sub-directory is created for every transfer session.
- New: Added a new custom format %SP for custom sub-directory creation based on media type (Live Photo, Screenshots...)
- New: Added new custom formats %MOT and %MOL to add the Moments title and Moments location into the file name or sub-directory name
- New: Added an option "Assign Live Photo MOV to photo folder" for sub-directory creation. When enabling this option both files of a Live Photo are stored in the photos folder, when the %2P or %3P format is used.
- New: Added option "Upload in Chunks" for WebDAV connections. This option is helpful e.g. for WebDAV servers proxied by CloudFare
- New: Added host key checks for SFTP connection
- New: Added an option to convert ProRes Videos to H264 or HEVC
- New: Option to set the "Modification" date on supported WebDAV servers in seconds or milliseconds
- New: Changed video container format to Quicktime for rendered Slo-mo videos
- New: Added an option to disable the Photobooth feature (HDMI & AirPlay) for the PhotoSync Camera
- New: HEIC->JPEG conversion is now supported when transferring between targets
- New: The preferences for video resizing are now also applied for the Sharing Extension, In-App Camera and Cross-Transfers
- Improved: SMB transfer performance of small photos / videos
- Improved: Detection of new photos & videos on iOS 17
- Fixed: When the "Live effect" for a "Live Photo" was deactivated, an additional MOV / JPEG file was transferred
- Fixed: The caption of photos could not be read in some cases
- Fixed: In some cases the rendered version of a Slo-mo video was not transferred
- Fixed: Some screenshots were transferred as JPEG instead of PNG on iOS 16
- Fixed: AAE files sometimes had a non-matching file name
- Fixed: Added some additional error handling when assets have no data
- Fixed: For S3 uploads the mime type is now set correctly
- Fixed: Uploads to SmugMug were no longer working due to changes by SmugMug
- Fixed: A crash issue when transferring to the Files App target
- Fixed: Transfers to SmugMug, when "Select before transfer" is enabled
- Fixed: Improved FTP transfers from cameras
- Fixed: An issue that resulted in incorrect selections after deleting photo(s) (Moments view)
- Fixed: Several crash issues (thumbnail generation, missing mime types, transfers to Files App, Quick Transfer)
4.7.1
Sep 21, 2022
- New: PhotoSync can now transfer both the original HEVC file and the converted H264 file of a video. You can configure this in the settings of the transfer target.
- Fixed: PhotoSync could not read the user assigned device name on iOS 16 (instead the common name iPhone was used). This functionality has been restored. For this to work in the PhotoSync Sharing Extensions, the PhotoSync App has to be started at least one time.
- Fixed: PhotoSync now uses multipart uploads to Amazon S3 and Wasabi which enables uploads for videos larger than 5GB.
- Fixed: PhotoSync will not ask for HEIC->JPEG conversion, when the user has already made a choice in settings.
- Fixed: Some rare crash issues when logging in to TeraCLOUD.
- Fixed: PhotoSync could not read the user assigned device name on iOS 16 (instead the common name iPhone was used). This functionality has been restored. For this to work in the PhotoSync Sharing Extensions, the PhotoSync App has to be started at least one time.
- Fixed: PhotoSync now uses multipart uploads to Amazon S3 and Wasabi which enables uploads for videos larger than 5GB.
- Fixed: PhotoSync will not ask for HEIC->JPEG conversion, when the user has already made a choice in settings.
- Fixed: Some rare crash issues when logging in to TeraCLOUD.
4.7
Aug 2, 2022
- New: PhotoSync can now backup photos & videos to TeraCLOUD. You can also view / download photos & videos stored on TeraCLOUD.
- New: PhotoSync can now embed the Photos app caption into the metadata of photo / video files before transfer. This feature can be activated in the settings of the transfer target.
- New: Option to embed the Favorite flag as IPTC 5-star rating or Quicktime / XMP metadata. This feature can be activated in the settings of the transfer target.
- New: Added custom file name format for portrait photos (%POR).
- New: The Photos app caption can now be used as part of a custom file name format (%TITLE).
- New: The watch folder for FlashAir transfers (Shoot & Transfer) can now be specified. The default is /DCIM.
- Improved handling of temporary files for Live Photos and converted photos / videos.
- Fixed: For RAW+JPEG pairs the HEIC->JPEG conversion settings were ignored.
- Fixed: When doing Shoot & Transfer from cameras or FlashAir cards the custom settings for subdirectory creation were not used in some cases.
- Fixed: High Dynamic Range and Cinematic Videos were not detected as videos in some cases.
- New: PhotoSync can now embed the Photos app caption into the metadata of photo / video files before transfer. This feature can be activated in the settings of the transfer target.
- New: Option to embed the Favorite flag as IPTC 5-star rating or Quicktime / XMP metadata. This feature can be activated in the settings of the transfer target.
- New: Added custom file name format for portrait photos (%POR).
- New: The Photos app caption can now be used as part of a custom file name format (%TITLE).
- New: The watch folder for FlashAir transfers (Shoot & Transfer) can now be specified. The default is /DCIM.
- Improved handling of temporary files for Live Photos and converted photos / videos.
- Fixed: For RAW+JPEG pairs the HEIC->JPEG conversion settings were ignored.
- Fixed: When doing Shoot & Transfer from cameras or FlashAir cards the custom settings for subdirectory creation were not used in some cases.
- Fixed: High Dynamic Range and Cinematic Videos were not detected as videos in some cases.
4.6.8
Mar 30, 2022
- Fixed: A crash issue occuring during transfer between two targets
- Fixed: The sync button did not work in some very rare cases
- Fixed: Disabling "Use filenames as descriptions" will now work for in all scenarios (Google Photos)
- Fixed: The sync button did not work in some very rare cases
- Fixed: Disabling "Use filenames as descriptions" will now work for in all scenarios (Google Photos)
4.6.7
Mar 26, 2022
- Fixed: Crash issue when using the PhotoSync camera and viewing just recorded photos
- Fixed: Slashes are not removed for SMB album/folder names anymore
- Fixed: Improved handling of cancelled SMB transfers
- Fixed: The option "Filename as description" (Google Photos) was not working
- Fixed: Slashes are not removed for SMB album/folder names anymore
- Fixed: Improved handling of cancelled SMB transfers
- Fixed: The option "Filename as description" (Google Photos) was not working
4.6.6
Mar 7, 2022
- Fixed: The Sharing extensions now respects the HEIC->JPEG conversion settings
- Fixed: All temporary files are now deleted immediately after transfer instead of on the next app start up
- Fixed: Issues when transferring to SMB 1 servers; temporary files prefixed with "." failed to move to the final filename
- Fixed: Improved performance when importing a large number of photos/videos from remote services
- Fixed: Compatibility with Go Anywhere SFTP servers
4.6.5
Feb 22, 2022
- New: PhotoSync now loads photo thumbnails for photos up to 15MB for NAS and cloud services. The file size limit can be increased in the Wi-Fi / Cellular settings of the transfer target. Embedded video thumbnails are also loaded.
- New: Streaming video playback is now supported for many remote services (NAS services, many cloud services, iXpand Drives, USB drives).
- New: Added option for SMB, FTP, iXpand and Files App targets to disable writing to a temporary file. Also, the prefix character for the temporary file can be changed. It defaults now to '.' instead of '__'.
- New: When the Location Data (GPS) option is set to ‘Edited’ or ‘Remove’, PhotoSync will now re-encode the photo / video but only when necessary.
- New: When transferring from the iOS Photos App (using the Sharing extension) HEIC photos can now be transferred if available.
- New: Added custom format ‘weekday name (abbreviated and full name)’ for subdirectory creation and custom file names.
- New: Client Certificate authentication is now supported for WebDAV connections.
- New: Added option to set the FTP TLS mode for FTPS connections to ‘Explicit’ or ‘Implicit’.
- New: Added option for Lumix Cameras to stream videos instead of downloading them first. Photo previews for Lumix cameras are more performant as PhotoSync downloads a preview version of the photo instead of the full size photo.
- New: Added switch for S3 targets to disable SSL certificate checks, when a custom API URL is entered (useful for self-hosted Minio instances).
- New: Added support for upgrading RSA-Security for SFTP transfers.
- Fixed: In some cases the location data was not updated / removed for Slow-Motion Videos, when the Location Data (GPS) option was set to ‘Edited’ or ‘Removed’.
- Fixed: The video part of a Live Photo was transferred, even if the Live Photo effect was removed in the Photos App.
- Fixed: The import of ed22519 keys did not work using the Files App or Clipboard.
- Fixed: When many photos / videos were skipped (e.g. WhatsApp images, screenshots) in a row, PhotoSync could crash.
- Fixed: The content type for uploads to Backblaze is now determined by Backblaze servers instead of being set explicitly.
- Fixed: Some random occurring issues when writing to external USB drives.
- Fixed: The custom formats %MODEL and %MAKE did not work correctly for Slow-Motion Videos and the video part of Live Photos.
- Fixed: When transferring to SMB, non-permitted characters in file names / album names are now replaced by _.
- Fixed: When transferring to iXpand drives, non-permitted characters on FAT and exFAT file systems are now replaced by _.
- Fixed: Some EXIF variables for custom subdirectory creation were not interpreted correctly when transferring to iXpand drives, iCloud / USB, Dropbox and SugarSync.
- Fixed: TIFF files were transferred as JPEG in some cases.
- Fixed: Some visual issues on iOS 15.
- Fixed: Issues when loading categories in SmugMug caused by a SmugMug API change.
- Fixed: Issues when authenticating to Dropbox
- New: Streaming video playback is now supported for many remote services (NAS services, many cloud services, iXpand Drives, USB drives).
- New: Added option for SMB, FTP, iXpand and Files App targets to disable writing to a temporary file. Also, the prefix character for the temporary file can be changed. It defaults now to '.' instead of '__'.
- New: When the Location Data (GPS) option is set to ‘Edited’ or ‘Remove’, PhotoSync will now re-encode the photo / video but only when necessary.
- New: When transferring from the iOS Photos App (using the Sharing extension) HEIC photos can now be transferred if available.
- New: Added custom format ‘weekday name (abbreviated and full name)’ for subdirectory creation and custom file names.
- New: Client Certificate authentication is now supported for WebDAV connections.
- New: Added option to set the FTP TLS mode for FTPS connections to ‘Explicit’ or ‘Implicit’.
- New: Added option for Lumix Cameras to stream videos instead of downloading them first. Photo previews for Lumix cameras are more performant as PhotoSync downloads a preview version of the photo instead of the full size photo.
- New: Added switch for S3 targets to disable SSL certificate checks, when a custom API URL is entered (useful for self-hosted Minio instances).
- New: Added support for upgrading RSA-Security for SFTP transfers.
- Fixed: In some cases the location data was not updated / removed for Slow-Motion Videos, when the Location Data (GPS) option was set to ‘Edited’ or ‘Removed’.
- Fixed: The video part of a Live Photo was transferred, even if the Live Photo effect was removed in the Photos App.
- Fixed: The import of ed22519 keys did not work using the Files App or Clipboard.
- Fixed: When many photos / videos were skipped (e.g. WhatsApp images, screenshots) in a row, PhotoSync could crash.
- Fixed: The content type for uploads to Backblaze is now determined by Backblaze servers instead of being set explicitly.
- Fixed: Some random occurring issues when writing to external USB drives.
- Fixed: The custom formats %MODEL and %MAKE did not work correctly for Slow-Motion Videos and the video part of Live Photos.
- Fixed: When transferring to SMB, non-permitted characters in file names / album names are now replaced by _.
- Fixed: When transferring to iXpand drives, non-permitted characters on FAT and exFAT file systems are now replaced by _.
- Fixed: Some EXIF variables for custom subdirectory creation were not interpreted correctly when transferring to iXpand drives, iCloud / USB, Dropbox and SugarSync.
- Fixed: TIFF files were transferred as JPEG in some cases.
- Fixed: Some visual issues on iOS 15.
- Fixed: Issues when loading categories in SmugMug caused by a SmugMug API change.
- Fixed: Issues when authenticating to Dropbox
4.6.1
Sep 21, 2021
- Fixed: Issues with Siri Shortcuts on iOS 15 leading to repeating permission dialogs
- Fixed: The PhotoSync Camera did not save Live Photos, when JPEG+RAW was selected as photo format
- Fixed: The PhotoSync Camera did not save Live Photos, when JPEG+RAW was selected as photo format
4.6
Sep 20, 2021
- New: Fully optimized for iOS 15 – including a new Smart Album for RAW photos. PhotoSync can now embed updated location information in photos and videos.
- New: Restructured "Transfer Quality" settings: More user-friendly settings for transfer quality. Photo transfers can now be disabled.
- New: EXIF metadata (camera brand, camera model, dimensions, ISO, shutter speed, aperture, focal length) and IPTC metadata (copyright, caption, star rating) can now be used for custom sub-directory creation and for custom file names.
- New: PhotoSync now supports the re-sizing / re-encoding of videos before transfer (1080p, 720p, 480p are available as options).
- New: Added support for professional cameras from Canon, Nikon, Sony and Fujifilm that support FTP transfers.
To enable the PhotoSync FTP server, open the PhotoSync settings, tap "Configure" and select the service (e.g. Canon Wi-Fi). Then tap "FTP server", enable it and enter a login and password. Tap the red sync button, then "Receive" and the camera service (e.g. Canon Wi-Fi) to make PhotoSync listen for FTP connections.
- New: Option in "Transfer Quality" settings to remove Location Data (GPS) or use edited location data (e.g. changed in the Photos App) instead of the original location data that was saved when capturing the photo.
- New: Added "Delete After Transfer" options: Photos only, videos only, photos & videos.
- New: Option to enable / disable a display warning regarding skipped media files (e.g. WhatsApp, Screenshots).
- New: Expert option "Keep Recording Time Zone". Enabling this option does not adjust the recording time to the local time zone (iOS 13 and higher).
- New: RAW support for Zenfolio. RAW photos can now be uploaded to Zenfolio. RAW support can be enabled in the Zenfolio settings.
- New: iOS Photo Library folders can now be selected for Autotransfer.
- New: Expert option to import RAW+JPEG as a pair instead of separate images.
- New: Added "Device Name" (%DP) variable for custom file names.
- Fixed: Improved compatibility of SFTP uploads with Synology Photos.
- Fixed: Sub-directory formats did not work for the PhotoSync Camera.
- Fixed: When transferring RAW+JPEG, the JPEG was not assigned to the selected target album.
- Fixed: Transfer to public SMB shares.
- Fixed: When creating a folder on SMB servers, leading and trailing white spaces are removed.
- Fixed: Manually configured computer targets could not be selected for Autotransfer, Quick Transfer, the PhotoSync Camera and in the Share Sheet Extension.
- New: Restructured "Transfer Quality" settings: More user-friendly settings for transfer quality. Photo transfers can now be disabled.
- New: EXIF metadata (camera brand, camera model, dimensions, ISO, shutter speed, aperture, focal length) and IPTC metadata (copyright, caption, star rating) can now be used for custom sub-directory creation and for custom file names.
- New: PhotoSync now supports the re-sizing / re-encoding of videos before transfer (1080p, 720p, 480p are available as options).
- New: Added support for professional cameras from Canon, Nikon, Sony and Fujifilm that support FTP transfers.
To enable the PhotoSync FTP server, open the PhotoSync settings, tap "Configure" and select the service (e.g. Canon Wi-Fi). Then tap "FTP server", enable it and enter a login and password. Tap the red sync button, then "Receive" and the camera service (e.g. Canon Wi-Fi) to make PhotoSync listen for FTP connections.
- New: Option in "Transfer Quality" settings to remove Location Data (GPS) or use edited location data (e.g. changed in the Photos App) instead of the original location data that was saved when capturing the photo.
- New: Added "Delete After Transfer" options: Photos only, videos only, photos & videos.
- New: Option to enable / disable a display warning regarding skipped media files (e.g. WhatsApp, Screenshots).
- New: Expert option "Keep Recording Time Zone". Enabling this option does not adjust the recording time to the local time zone (iOS 13 and higher).
- New: RAW support for Zenfolio. RAW photos can now be uploaded to Zenfolio. RAW support can be enabled in the Zenfolio settings.
- New: iOS Photo Library folders can now be selected for Autotransfer.
- New: Expert option to import RAW+JPEG as a pair instead of separate images.
- New: Added "Device Name" (%DP) variable for custom file names.
- Fixed: Improved compatibility of SFTP uploads with Synology Photos.
- Fixed: Sub-directory formats did not work for the PhotoSync Camera.
- Fixed: When transferring RAW+JPEG, the JPEG was not assigned to the selected target album.
- Fixed: Transfer to public SMB shares.
- Fixed: When creating a folder on SMB servers, leading and trailing white spaces are removed.
- Fixed: Manually configured computer targets could not be selected for Autotransfer, Quick Transfer, the PhotoSync Camera and in the Share Sheet Extension.
4.5.2
Apr 23, 2021
This update fixes an issue when transferring to Fritz!Box SMB servers and macOS SMB servers.
4.5.1
Apr 21, 2021
- Fixed: When using the PhotoSync Share Extension computers and mobile devices were not detected
- Fixed: Improved compatibility with some FujiFilm cameras in "Select on camera" mode
- Fixed: Crash issue when browsing SMB shares and the target directory is not present anymore
- Fixed: Improved compatibility with some FujiFilm cameras in "Select on camera" mode
- Fixed: Crash issue when browsing SMB shares and the target directory is not present anymore
4.5
Apr 19, 2021
- New: Support for external cameras connected over USB (Premium, iOS 14.2 and higher)
Transfer photos & videos from your external cameras over USB to iPhone / iPad or directly to remote targets. Tethered shooting over USB is supported for many Canon EOS cameras.
PhotoSync supports both PTP / MTP and Mass-Storage Mode of external cameras. If both are available on your camera, choose PTP / MTP for better performance and more features.
- New: Support for FujiFilm Cameras with Wi-Fi Support (Premium)
Download photos & videos including RAWs from Fujifilm Wi-Fi cameras. Instant backup / wireless tethering plus photo booth support over AirPlay & HDMI for selected camera models.
PhotoSync supports all Wi-Fi operation modes of Fujifilm cameras (Wireless Communication, PC Auto Save, Wireless Tethering). In PC Auto Save Mode (and Wireless Tethering) also the transfer of RAW files is supported.
- New: Support for pCloud
Backup to pCloud, as well as view and download photos & videos stored on pCloud.
- New: Support for PhotoPrism.
Backup to PhotoPrism, as well as view and download photos & videos stored on PhotoPrism.
PhotoPrism is a powerful, AI-based solution for organising and browsing your photo collection. You can privately host PhotoPrism on your own server or even a Raspberry Pi. For more information, please visit https://photoprism.app
- New: Wireless Tethering for Toshiba FlashAir Wi-Fi SD cards
Transfer photo & videos immediately after recording. Photobooth support over AirPlay & HDMI
- New: Configure Amazon S3, Wasabi and Backblaze connections over MDM
- New: Added option to configure file name format for "favorites"
- New: Added custom format "recording / transfer quarter" for file names and sub-directories.
- New: Added an option to transfer only "protected images" for Nikon Cameras in "Connect to PC" mode
- New: Shared cloud albums can now be selected for Autotransfer, when the transfer source is "Recents"
- Fixed: Live Photos were not properly imported in some rare cases
- Fixed: Upload issues to encrypted SMB shares
- Fixed: Works around an issue that some Fritz!Boxes do not properly support TLS 1.3 encryption
- Fixed: Some configuration parameters were not properly set over MDM
- Fixed: Autotransfer to SFTP Servers failed, when SSH private key authentication was used
- Fixed: %AFP custom file name variable did not work in some cases
- Fixed: Album names are now trimmed to avoid issues with some transfer targets
- Fixed: Uploading rendered Slow Motion videos to WebDAV did not work in some cases
- Fixed: A rare issue when recording photos using the PhotoSync Camera
- Fixed: The directory selection for Amazon S3, Wasabi and Backblaze connections did not work correctly in some rare cases
- Fixed: Some rare crash issues when deleting photos or albums
Transfer photos & videos from your external cameras over USB to iPhone / iPad or directly to remote targets. Tethered shooting over USB is supported for many Canon EOS cameras.
PhotoSync supports both PTP / MTP and Mass-Storage Mode of external cameras. If both are available on your camera, choose PTP / MTP for better performance and more features.
- New: Support for FujiFilm Cameras with Wi-Fi Support (Premium)
Download photos & videos including RAWs from Fujifilm Wi-Fi cameras. Instant backup / wireless tethering plus photo booth support over AirPlay & HDMI for selected camera models.
PhotoSync supports all Wi-Fi operation modes of Fujifilm cameras (Wireless Communication, PC Auto Save, Wireless Tethering). In PC Auto Save Mode (and Wireless Tethering) also the transfer of RAW files is supported.
- New: Support for pCloud
Backup to pCloud, as well as view and download photos & videos stored on pCloud.
- New: Support for PhotoPrism.
Backup to PhotoPrism, as well as view and download photos & videos stored on PhotoPrism.
PhotoPrism is a powerful, AI-based solution for organising and browsing your photo collection. You can privately host PhotoPrism on your own server or even a Raspberry Pi. For more information, please visit https://photoprism.app
- New: Wireless Tethering for Toshiba FlashAir Wi-Fi SD cards
Transfer photo & videos immediately after recording. Photobooth support over AirPlay & HDMI
- New: Configure Amazon S3, Wasabi and Backblaze connections over MDM
- New: Added option to configure file name format for "favorites"
- New: Added custom format "recording / transfer quarter" for file names and sub-directories.
- New: Added an option to transfer only "protected images" for Nikon Cameras in "Connect to PC" mode
- New: Shared cloud albums can now be selected for Autotransfer, when the transfer source is "Recents"
- Fixed: Live Photos were not properly imported in some rare cases
- Fixed: Upload issues to encrypted SMB shares
- Fixed: Works around an issue that some Fritz!Boxes do not properly support TLS 1.3 encryption
- Fixed: Some configuration parameters were not properly set over MDM
- Fixed: Autotransfer to SFTP Servers failed, when SSH private key authentication was used
- Fixed: %AFP custom file name variable did not work in some cases
- Fixed: Album names are now trimmed to avoid issues with some transfer targets
- Fixed: Uploading rendered Slow Motion videos to WebDAV did not work in some cases
- Fixed: A rare issue when recording photos using the PhotoSync Camera
- Fixed: The directory selection for Amazon S3, Wasabi and Backblaze connections did not work correctly in some rare cases
- Fixed: Some rare crash issues when deleting photos or albums
4.4.2
Nov 18, 2020
- New: PhotoSync can now transfer AAE sidecar files (for non destructive editing). To activate the transfer of AAE files, choose "Original" or "Original+Edited" under versions and activate AAE sidecars
- Fixed: Transferring rendered Slo-Mo-Videos to some targets did not work properly
- Fixed: For edited videos (original+edited version) on iOS 14 incorrect file versions were transferred
- Fixed: Web-Sharing could not respond in some cases
- Fixed: Downloads from Dropbox could fail in some rare cases
- Improved sort order for custom subdirectory and filename formats
- Fixed: Transferring rendered Slo-Mo-Videos to some targets did not work properly
- Fixed: For edited videos (original+edited version) on iOS 14 incorrect file versions were transferred
- Fixed: Web-Sharing could not respond in some cases
- Fixed: Downloads from Dropbox could fail in some rare cases
- Improved sort order for custom subdirectory and filename formats
4.4.1
Oct 9, 2020
This update fixes a couple of bugs and improves iOS 14 compatibility.
4.4
Sep 21, 2020
- New: Fully optimized for iOS 14 – including support for the "Limited Photo Library" and local network access permissions.
- New: Support for Sony Cameras with Wi-Fi support (Alpha, RX, WX, HX and NEX-Series)
Backup and transfer photos & videos the moment you take them (wireless tethering). Manually download from Sony Wi-Fi cameras. Photo booth support over AirPlay & HDMI (Premium). Please note that the exact supported feature set depends on the camera model.
- New: For HEIC -> JPEG conversions the JPEG quality can now be customized.
- New: For Slow Motion videos you can now choose to transfer either the original high-frame rate file or a version with the slow motion effect rendered in. Optionally also both versions can be transferred.
- New: Added custom format to include abbreviated month names (Jan, Feb etc) in filename-/subdirectory formats.
- Fixed: When transferring Live Photos between iOS devices, some files could be overwritten / were not imported due to duplicate filenames
- Fixed: Issue when uploading videos to Amazon S3 while HEVC to H264 conversion is enabled
- Fixed: Rare crash issue that could occur when viewing a photo in full screen (Web Sharing)
- Fixed: Crash issue when browsing directories on Amazon S3 when the directory name contains an apostrophe (e.g. Jim's iPhone)
- Fixed: The file date was not set correctly when downloading videos from Lumix Cameras and transferring directly to another target
- Fixed: Improved SMB compatibility when authenticating against active directory user accounts
- Fixed: Potential issue when transferring to some SMB 1 servers
- Fixed: Rare crash issue, when deleting custom filename and subdirectory formats
- New: Support for Sony Cameras with Wi-Fi support (Alpha, RX, WX, HX and NEX-Series)
Backup and transfer photos & videos the moment you take them (wireless tethering). Manually download from Sony Wi-Fi cameras. Photo booth support over AirPlay & HDMI (Premium). Please note that the exact supported feature set depends on the camera model.
- New: For HEIC -> JPEG conversions the JPEG quality can now be customized.
- New: For Slow Motion videos you can now choose to transfer either the original high-frame rate file or a version with the slow motion effect rendered in. Optionally also both versions can be transferred.
- New: Added custom format to include abbreviated month names (Jan, Feb etc) in filename-/subdirectory formats.
- Fixed: When transferring Live Photos between iOS devices, some files could be overwritten / were not imported due to duplicate filenames
- Fixed: Issue when uploading videos to Amazon S3 while HEVC to H264 conversion is enabled
- Fixed: Rare crash issue that could occur when viewing a photo in full screen (Web Sharing)
- Fixed: Crash issue when browsing directories on Amazon S3 when the directory name contains an apostrophe (e.g. Jim's iPhone)
- Fixed: The file date was not set correctly when downloading videos from Lumix Cameras and transferring directly to another target
- Fixed: Improved SMB compatibility when authenticating against active directory user accounts
- Fixed: Potential issue when transferring to some SMB 1 servers
- Fixed: Rare crash issue, when deleting custom filename and subdirectory formats
4.3.2
Jul 10, 2020
- Fixed: Issue when transferring large videos to SMB
- Fixed: Issue when viewing photos/video from Google Drive in full-screen mode
- Fixed: Issue when performing direct transfer and "Select before transfer" is enabled
- Fixed: The transfer filter for RAW/JPEG did not work for Olympus Cameras in tethering
mode
New in PhotoSync 4.3:
- New: Direct transfer between services, devices and NAS
PhotoSync now enables direct transfer between targets without having to import into the iOS Photo Library first.
You can e.g., directly transfer from OneDrive to a NAS, from SMB to an USB device – supported transfer combinations are basically endless!
- New: Support for Lumix & Olympus Wi-Fi Cameras
Backup and transfer photos & videos the moment you take them (wireless tethering). Manually download and delete from Lumix & Olympus Wi-Fi cameras. Photo booth support over AirPlay & HDMI (Premium).
- New: Settings Quick Access
By doing a long press on the icon of a transfer target, you can now directly access its settings.
- New: Support for SMB 3 encryption
To connect to an encrypted SMB share, select "SMB 3 encrypted" as "Protocol".
- New: Added custom format to include the album name in the filename.
- New: "Show grid" option for the PhotoSync Camera (Premium).
- Fixed: Large video uploads to S3, Wasabi and Backblaze could fail.
- Fixed: When transferring directly from the Photos App using the PhotoSync Share Sheet in some cases not all selected photos/videos were transferred.
- Fixed: SMB Negotiation/Connection with servers, that only have SMB 3 enabled.
- Fixed: Issue when viewing photos/video from Google Drive in full-screen mode
- Fixed: Issue when performing direct transfer and "Select before transfer" is enabled
- Fixed: The transfer filter for RAW/JPEG did not work for Olympus Cameras in tethering
mode
New in PhotoSync 4.3:
- New: Direct transfer between services, devices and NAS
PhotoSync now enables direct transfer between targets without having to import into the iOS Photo Library first.
You can e.g., directly transfer from OneDrive to a NAS, from SMB to an USB device – supported transfer combinations are basically endless!
- New: Support for Lumix & Olympus Wi-Fi Cameras
Backup and transfer photos & videos the moment you take them (wireless tethering). Manually download and delete from Lumix & Olympus Wi-Fi cameras. Photo booth support over AirPlay & HDMI (Premium).
- New: Settings Quick Access
By doing a long press on the icon of a transfer target, you can now directly access its settings.
- New: Support for SMB 3 encryption
To connect to an encrypted SMB share, select "SMB 3 encrypted" as "Protocol".
- New: Added custom format to include the album name in the filename.
- New: "Show grid" option for the PhotoSync Camera (Premium).
- Fixed: Large video uploads to S3, Wasabi and Backblaze could fail.
- Fixed: When transferring directly from the Photos App using the PhotoSync Share Sheet in some cases not all selected photos/videos were transferred.
- Fixed: SMB Negotiation/Connection with servers, that only have SMB 3 enabled.
4.3.1
Jul 3, 2020
- Fixed: Transfer from the PhotoSync Companion to iOS did sometimes fail
- Fixed: Issues when viewing photos/videos from Wi-Fi cameras in fullscreen
New in PhotoSync 4.3:
- New: Direct transfer between services, devices and NAS
PhotoSync now enables direct transfer between targets without having to import into the iOS Photo Library first.
You can e.g., directly transfer from OneDrive to a NAS, from SMB to an USB device – supported transfer combinations are basically endless!
- New: Support for Lumix & Olympus Wi-Fi Cameras
Backup and transfer photos & videos the moment you take them (wireless tethering). Manually download and delete from Lumix & Olympus Wi-Fi cameras. Photo booth support over AirPlay & HDMI (Premium).
- New: Settings Quick Access
By doing a long press on the icon of a transfer target, you can now directly access its settings.
- New: Support for SMB 3 encryption
To connect to an encrypted SMB share, select "SMB 3 encrypted" as "Protocol".
- New: Added custom format to include the album name in the filename.
- New: "Show grid" option for the PhotoSync Camera (Premium).
- Fixed: Large video uploads to S3, Wasabi and Backblaze could fail.
- Fixed: When transferring directly from the Photos App using the PhotoSync Share Sheet in some cases not all selected photos/videos were transferred.
- Fixed: SMB Negotiation/Connection with servers, that only have SMB 3 enabled.
- Fixed: Issues when viewing photos/videos from Wi-Fi cameras in fullscreen
New in PhotoSync 4.3:
- New: Direct transfer between services, devices and NAS
PhotoSync now enables direct transfer between targets without having to import into the iOS Photo Library first.
You can e.g., directly transfer from OneDrive to a NAS, from SMB to an USB device – supported transfer combinations are basically endless!
- New: Support for Lumix & Olympus Wi-Fi Cameras
Backup and transfer photos & videos the moment you take them (wireless tethering). Manually download and delete from Lumix & Olympus Wi-Fi cameras. Photo booth support over AirPlay & HDMI (Premium).
- New: Settings Quick Access
By doing a long press on the icon of a transfer target, you can now directly access its settings.
- New: Support for SMB 3 encryption
To connect to an encrypted SMB share, select "SMB 3 encrypted" as "Protocol".
- New: Added custom format to include the album name in the filename.
- New: "Show grid" option for the PhotoSync Camera (Premium).
- Fixed: Large video uploads to S3, Wasabi and Backblaze could fail.
- Fixed: When transferring directly from the Photos App using the PhotoSync Share Sheet in some cases not all selected photos/videos were transferred.
- Fixed: SMB Negotiation/Connection with servers, that only have SMB 3 enabled.
4.3
Jul 2, 2020
- New: Direct transfer between services, devices and NAS
PhotoSync now enables direct transfer between targets without having to import into the iOS Photo Library first.
You can e.g., directly transfer from OneDrive to a NAS, from SMB to an USB device – supported transfer combinations are basically endless!
- New: Support for Lumix & Olympus Wi-Fi Cameras
Backup and transfer photos & videos the moment you take them (wireless tethering). Manually download and delete from Lumix & Olympus Wi-Fi cameras. Photo booth support over AirPlay & HDMI (Premium).
- New: Settings Quick Access
By doing a long press on the icon of a transfer target, you can now directly access its settings.
- New: Support for SMB 3 encryption
To connect to an encrypted SMB share, select "SMB 3 encrypted" as "Protocol".
- New: Added custom format to include the album name in the filename.
- New: "Show grid" option for the PhotoSync Camera (Premium).
- Fixed: Large video uploads to S3, Wasabi and Backblaze could fail.
- Fixed: When transferring directly from the Photos App using the PhotoSync Share Sheet in some cases not all selected photos/videos were transferred.
- Fixed: SMB Negotiation/Connection with servers, that only have SMB 3 enabled.
PhotoSync now enables direct transfer between targets without having to import into the iOS Photo Library first.
You can e.g., directly transfer from OneDrive to a NAS, from SMB to an USB device – supported transfer combinations are basically endless!
- New: Support for Lumix & Olympus Wi-Fi Cameras
Backup and transfer photos & videos the moment you take them (wireless tethering). Manually download and delete from Lumix & Olympus Wi-Fi cameras. Photo booth support over AirPlay & HDMI (Premium).
- New: Settings Quick Access
By doing a long press on the icon of a transfer target, you can now directly access its settings.
- New: Support for SMB 3 encryption
To connect to an encrypted SMB share, select "SMB 3 encrypted" as "Protocol".
- New: Added custom format to include the album name in the filename.
- New: "Show grid" option for the PhotoSync Camera (Premium).
- Fixed: Large video uploads to S3, Wasabi and Backblaze could fail.
- Fixed: When transferring directly from the Photos App using the PhotoSync Share Sheet in some cases not all selected photos/videos were transferred.
- Fixed: SMB Negotiation/Connection with servers, that only have SMB 3 enabled.
4.2
Apr 11, 2020
- New: Wasabi Support
Backup photos & videos to Wasabi, as well as view and download photos & videos stored on Wasabi (Premium)
- New: Backblaze Support
Backup photos & videos to Backblaze, as well as view and download photos & videos stored on Backblaze (Premium)
- New: Managed App Configuration
You can now customise PhotoSync features and configure transfer targets using your Mobile Device Management solution (MDM) or a settings file. For more information please visit config.photosync-app.com
- New: Support for Nikon Wi-Fi Cameras
Backup and transfer photos & videos the moment you take them. Manually download from Nikon Wi-Fi cameras. Photo booth support over AirPlay & HDMI (Premium)
- New: You can now configure the PhotoSync camera to open without the configuration screen
- New: For Canon and Nikon cameras, you can now specify the SSID and credentials of the camera Wi-Fi in settings. PhotoSync will then automatically connect to the camera Wi-Fi hotspot
- Fixed: Specifying a custom port (other than 445) did not work for SMB2/3 connections
- Fixed: Some issues in Asian language localizations
- Fixed: Potential crash issue while browsing the path history
Backup photos & videos to Wasabi, as well as view and download photos & videos stored on Wasabi (Premium)
- New: Backblaze Support
Backup photos & videos to Backblaze, as well as view and download photos & videos stored on Backblaze (Premium)
- New: Managed App Configuration
You can now customise PhotoSync features and configure transfer targets using your Mobile Device Management solution (MDM) or a settings file. For more information please visit config.photosync-app.com
- New: Support for Nikon Wi-Fi Cameras
Backup and transfer photos & videos the moment you take them. Manually download from Nikon Wi-Fi cameras. Photo booth support over AirPlay & HDMI (Premium)
- New: You can now configure the PhotoSync camera to open without the configuration screen
- New: For Canon and Nikon cameras, you can now specify the SSID and credentials of the camera Wi-Fi in settings. PhotoSync will then automatically connect to the camera Wi-Fi hotspot
- Fixed: Specifying a custom port (other than 445) did not work for SMB2/3 connections
- Fixed: Some issues in Asian language localizations
- Fixed: Potential crash issue while browsing the path history
4.1.1
Feb 12, 2020
- New: Added support for the new SanDisk iXpand Flash Drive Go
- New: For S3 connections a custom API URL can be entered allowing different backend servers other than AWS
- Fixes a crash issue on some devices when transferring from computer to device
- Fixed a display issue when albums in a folder were not shown
- Fixed a crash issue for Canon EOS Wi-Fi Cameras when receiving CR3 RAW files in Shoot & Transfer mode
- Fixed a file creation issue when transferring to iXpand Drives when the "Create subdirectories" option is set to "None"
- Fixed login issue for FTPS connections
- Fixed crash issue with RAW capture in the PhotoSync Camera when zoom is activated
- Fixed Google Drive "403 forbidden" error when uploading a file already existing on the target
- Fixed: Shutter animation behaviour in the PhotoSync Camera
- New: For S3 connections a custom API URL can be entered allowing different backend servers other than AWS
- Fixes a crash issue on some devices when transferring from computer to device
- Fixed a display issue when albums in a folder were not shown
- Fixed a crash issue for Canon EOS Wi-Fi Cameras when receiving CR3 RAW files in Shoot & Transfer mode
- Fixed a file creation issue when transferring to iXpand Drives when the "Create subdirectories" option is set to "None"
- Fixed login issue for FTPS connections
- Fixed crash issue with RAW capture in the PhotoSync Camera when zoom is activated
- Fixed Google Drive "403 forbidden" error when uploading a file already existing on the target
- Fixed: Shutter animation behaviour in the PhotoSync Camera
4.1
Jan 7, 2020
• New: Added "Files" as send/receive target: You can now transfer from/to USB drives, iCloud Drive and local storage leveraging the full functionality of PhotoSync (iOS 13)
• New: Added "Charging Trigger" for Autotransfer: This new trigger allows Autotransfer to be triggered when the device is charging and not in use (Premium, iOS 13)
• New: Added Amazon S3 as a transfer target (Premium)
• New "Automatic" theme that auto-switches between "Normal" and "Dark Mode" based on system settings (iOS 13)
• New: Modern context menus when long pressing on a thumbnail/support for haptic touch (iOS 13)
• New: Added support for ultra-wide angle lens on iPhone 11/iPhone 11 Pro in PhotoSync Camera (Premium)
• New: Shortcut to PhotoSync Camera in "Sync Menu" (can be turned off in Settings) (Premium)
• New: The video resolution (480p,720p,1080p,2160p) for the PhotoSync Camera can now be chosen before recording (Premium)
• New: When an album is in a nested structure, this structure is now recreated on the target
• New: Added support for transferring original+edited version for videos on iOS 13
• New: Support for Google Drive APIv3
• Fixed: When recording video in the PhotoSync Camera, the screen could lock
• Fixed: IPv6 support for SMB2/3
• Fixed: Uploads to FTP Servers that do not support the rename/move command
• Fixed: Issues when transferring to FileZilla FTP servers
• Fixed: WebDAV transfers to IIS servers with SSL enabled could fail (iOS 13)
• Fixed: Transfer of Live Photos in shared Photostreams (iOS 13)
• Fixed: When "Auto-create directories" was active in combination with "All bursts", some burst photos were saved into the wrong directory
• Fixed: Crash issue for SugarSync
• New: Added "Charging Trigger" for Autotransfer: This new trigger allows Autotransfer to be triggered when the device is charging and not in use (Premium, iOS 13)
• New: Added Amazon S3 as a transfer target (Premium)
• New "Automatic" theme that auto-switches between "Normal" and "Dark Mode" based on system settings (iOS 13)
• New: Modern context menus when long pressing on a thumbnail/support for haptic touch (iOS 13)
• New: Added support for ultra-wide angle lens on iPhone 11/iPhone 11 Pro in PhotoSync Camera (Premium)
• New: Shortcut to PhotoSync Camera in "Sync Menu" (can be turned off in Settings) (Premium)
• New: The video resolution (480p,720p,1080p,2160p) for the PhotoSync Camera can now be chosen before recording (Premium)
• New: When an album is in a nested structure, this structure is now recreated on the target
• New: Added support for transferring original+edited version for videos on iOS 13
• New: Support for Google Drive APIv3
• Fixed: When recording video in the PhotoSync Camera, the screen could lock
• Fixed: IPv6 support for SMB2/3
• Fixed: Uploads to FTP Servers that do not support the rename/move command
• Fixed: Issues when transferring to FileZilla FTP servers
• Fixed: WebDAV transfers to IIS servers with SSL enabled could fail (iOS 13)
• Fixed: Transfer of Live Photos in shared Photostreams (iOS 13)
• Fixed: When "Auto-create directories" was active in combination with "All bursts", some burst photos were saved into the wrong directory
• Fixed: Crash issue for SugarSync
4.0.1
Oct 4, 2019
- Fixed: Autotransfer was not triggered in some cases on iOS 13
- Fixed: User albums were not sorted alphabetically on iOS 13
- Fixed: Several transfer issues that occurred when "Allow overwrite" was disabled
- Fixed: Upload to WebDAV IIS servers using NTML authentication on iOS 13
- Fixed: The "Automatically create albums" option did not work correctly on iOS 13 when transferring from Mac / PC
- Fixed: Home Screen Quick Actions can now be configured on devices that support only Haptic Touch
- Fixed: Transfers to Canvio AeroMobile SSD did not work in some cases
- Removed: Amazon Cloud Drive support was removed from PhotoSync as Amazon stopped supporting 3rd party apps for Amazon Cloud Drive
- Fixed: User albums were not sorted alphabetically on iOS 13
- Fixed: Several transfer issues that occurred when "Allow overwrite" was disabled
- Fixed: Upload to WebDAV IIS servers using NTML authentication on iOS 13
- Fixed: The "Automatically create albums" option did not work correctly on iOS 13 when transferring from Mac / PC
- Fixed: Home Screen Quick Actions can now be configured on devices that support only Haptic Touch
- Fixed: Transfers to Canvio AeroMobile SSD did not work in some cases
- Removed: Amazon Cloud Drive support was removed from PhotoSync as Amazon stopped supporting 3rd party apps for Amazon Cloud Drive
4.0
Sep 18, 2019
PhotoSync 4.0 introduces SMB2/3 support, Siri support, support for Google Photos and lots of detail improvements.
PhotoSync is now free to download. The free version allows users to test all transfer functionality but transfers only in reduced quality. This limitation can be removed by upgrading to PhotoSync Pro (one-time purchase inside the app).
All existing PhotoSync users do not lose any functionality and are automatically upgraded to PhotoSync Pro.
This version also introduces PhotoSync Premium with exclusive features for power users. New Premium features in this release:
• Integrated PhotoSync Camera: Instant backup to computer, NAS, cloud and Photobooth support.
• Support for Canon EOS Wi-Fi Cameras: Instant transfer to iPhone/iPad after pressing the shutter.
• Advanced Siri Shortcuts: Build powerful workflows using the "Transfer from clipboard" & "Transfer new photos/videos" shortcut
• Support for Sandisk iXpand USB Drives: Backup to iXpand USB drive to free up local device space. Great for offline usage when travelling.
Premium is available as an upgrade inside the app (one-time purchase or subscription with free trial, special discounts are available for existing users).
For the full release notes, please visit release.photosync-app.com
PhotoSync is now free to download. The free version allows users to test all transfer functionality but transfers only in reduced quality. This limitation can be removed by upgrading to PhotoSync Pro (one-time purchase inside the app).
All existing PhotoSync users do not lose any functionality and are automatically upgraded to PhotoSync Pro.
This version also introduces PhotoSync Premium with exclusive features for power users. New Premium features in this release:
• Integrated PhotoSync Camera: Instant backup to computer, NAS, cloud and Photobooth support.
• Support for Canon EOS Wi-Fi Cameras: Instant transfer to iPhone/iPad after pressing the shutter.
• Advanced Siri Shortcuts: Build powerful workflows using the "Transfer from clipboard" & "Transfer new photos/videos" shortcut
• Support for Sandisk iXpand USB Drives: Backup to iXpand USB drive to free up local device space. Great for offline usage when travelling.
Premium is available as an upgrade inside the app (one-time purchase or subscription with free trial, special discounts are available for existing users).
For the full release notes, please visit release.photosync-app.com
PhotoSync – 사진 및 동영상 전송과 백업 FAQ
제한된 국가 또는 지역에서 PhotoSync – 사진 및 동영상 전송과 백업를 다운로드하는 방법을 알아보려면 여기를 클릭하십시오.
PhotoSync – 사진 및 동영상 전송과 백업의 최소 요구 사항을 보려면 다음 목록을 확인하십시오.
iPhone
iOS 11.0 이상 필요.
iPad
iPadOS 11.0 이상 필요.
iPod touch
iOS 11.0 이상 필요.
PhotoSync – 사진 및 동영상 전송과 백업은 다음 언어를 지원합니다. 한국어, 독일어, 스페인어, 영어, 일본어, 중국어(간체), 중국어(번체), 프랑스어
PhotoSync – 사진 및 동영상 전송과 백업에는 인앱 구매가 포함되어 있습니다. 아래 요금제를 확인하세요.
PhotoSync 프리미엄 - 월간 간행물
￦1,200
PhotoSync 프리미엄 - 매년
￦8,000
PhotoSync Pro - 일생
￦8,800
PhotoSync 프리미엄 - 일생
￦33,000
PhotoSync 프리미엄 - 일생
￦22,000
PhotoSync 프리미엄 - 매년
￦8,000
PhotoSync 프리미엄 - 월간 간행물
￦1,200
