8.1.0
2024-03-20
• Added support for RTCM SC135 protocol for the Topcon R2Lite UHF radio
• In the GNSS Status, Renamed "H/V" to "HRMS/VRMS" to improved usability.
• Added the option to hide obsolete coordinate systems. The ‘Show legacy CS’ option is now available in the Coordinate System > Advanced Settings. Users can opt to show or hide legacy Coordinate System options in the list.
• Added the option to select a line or linework and get info about the layer it resides in.
• For Lines or Linework, when in Stake and Topo, added the option to configure "Value to Display" (point number, code, code description etc) for line code.
• Added Latvian language support
5.3.1
2022-08-17
Updated languages
5.3.0
2022-07-04
MAGNET Construct is a simple-to-use positioning control software. Whether you are a professional surveyor or a contractor, MAGNET Construct is going to make your life much easier when setting out or collecting points on your next job.
5.2.0
2022-01-15
WHAT'S NEW
MAGNET Construct is a simple-to-use positioning control software. With MAGNET Construct, the workflow is simple, the features are ever-growing, and the capabilities for precise positioning are in the palm of your hand. Whether you are a professional surveyor or a contractor, MAGNET Construct is going to make your life much easier when setting out or collecting points on your next job.
New in MAGNET Construct 5.2
• Post-process data collection support with storage on the controller or GNSS internal memory
• Updated Coordinate System support, including RTCM Online transformation
See the Release notes posted on MyTopcon.com for additional details.
5.1.0
2021-09-28
New in MAGNET Construct 5.1
Added TS/GNSS Raw Data support
Improved support for managing GNSS receivers.
Improved Total Station support for ‘Setup for 3DMC’
Improved Stakeout navigation compass
Added the option to Scale a PDF on import
Improved Map display options
See the Release notes posted on MyTopcon.com for additional details.
4.1.0
2020-09-21
New Major Features
MAGNET Construct V4.1 now includes support for MAGNET Vision companion app. Visit http://www.TopconPositioning.com to learn more.
Added Enter Plan
Added support for the new Topcon/ Sokkia GT/iX 600/1200 Robotic Total Stations.
Added support for Topcon/Sokkia Motorized Total Stations
Added support for Topcon/Sokkia Conventional Total Stations
Added the option to Import and export data between jobs.
Added the option to select Data type on import and export.
Other Features
Added the option to combine and export reports as a PDF
Change point name in Topo is now done with 2 clicks.
Added the option to select linework and reverse the direction of the line.
Added the option to reorder quick codes.
Added the option to configure the laser pointer and guide light in the default optical settings.
Added Hungarian language
4.0.0
2020-06-02
New Look and Feel
- Configurable, icon based main menu
- New app themes, Dark and Light
- All Topcon and Sokkia instruments got unique icons
- Added Global Options for UI Scale/Text size
Codes support
- Add/Edit/Delete Codes, Attributes, Code Strings & Control Codes
- Global Code Library
- Persistence settings
- Quick Codes
- Import/export
Linework/Areas support
- Add/Edit/Delete Linework and Areas
- Automatic creation based on Codes/Code Strings/Control Codes
- Fast Editing in Topo using Custom Text Fields
- 2D/3D Area calculation for areas
- Import/Export
Surfaces support
- Add/Edit/Delete surfaces
- Create contour lines for a surface
- Create surface from points and lines
- Import/export
Map improvements
- General improvements in 2D/3D map
- Customizable Favorites menu on the Map screen
- Allow user to generate surface points from the Map
- Added Custom Text Fields to Stake and Topo for new data types and routines
- Add the option "Create a field report" from the map
New features in Stake/Layout
- Stakeout of Surface and Linework
- Optional Reference CL, plane and/or surface
- Extending an existing ground or cut/fill surface in Stake Surface
- Stake Curve
- Added offsets to Stake Line, Curve and Linework
New in Coordinate Systems
- Swedish Geoid
- New Iowa projections
- Improved RTCM support
- An ability to download Geoids from cloud storage
- Import/Export localization to GC3
New in Hardware support
- Added LN-150
- Topcon BLE protocol v2.0
- Support SBAS for new Topcon receivers
- Added "Connecting to devices on startup"
- Added LN-100 simulator
- Added an ability to setup NMEA output on Topcon receivers
- Selection of country in the provider list
Setup Routines
- Hybrid Resection
- Added possibility to use non-existing points in Hybrid mode if the pre-defined grid projection was selected
- Added an ability to select a point from the map when performing a resection
- Set Elevation routine, with joystick control and an ability to store points
Compatibility
- Full compatibility with MAGNET 6.x suite (mjf and MaXML 1.4)
- Files application support on iOS
Other
- New Field Report images editor
- Extended Point List functionality: Copy Point, Sort and Find functions
- AutoCAD DWG 2019 supported for import
3.1.1
2019-08-05
German, French and Korean translations.
3.1
2019-06-04
3.1
Updated translations for Russian, Spanish, Chinese and Japanese languages.
3.0.1
UI improvements for iPhone X and iPhone Xs
3.0
New look and feel
Construction/Surveying terminology switch
Full compatibility with MAGNET 5.x suite
Support Topcon and Sokkia GNSS receivers:
- Corrections via Radios and Cell (NTRIP and direct TCP/IP)
- RTK, DGPS
- LongLink™ and LongRange™ communication support
- Support BLE for HiPer VR, GCX3, HiPer HR (requires fw update)
- Support GPS integrated into phone
Support Hybrid™ for Topcon and Fusion™ for Sokkia equipment
Full support of coordinate systems including custom projections, custom datums, geoids and localization
Support most of available Web Map Services as background map
New and Updated Import/Export formats:
- MAGNET XML (*.mxl, *.mxlzip)
- Topcon 3DMC (*.tp3)
- AutoCAD Drawing (*dwg)
- AutoCAD DXF (*.dxf)
- ESRI shape zipped
- LandXML (1.0, 1.2, 2.0) (*.xml)
- SIMA, SIMA Index (*.SIM)
Deviation reports customization
Seamless job backup to cloud
Improved performance for big projects
Editable layers
Multiple background drawings support
Map moving direction/rotation support
Improved stakeout control
Improved 3D map
3.0.1
2019-04-03
3.0.1
UI improvements for iPhone X and iPhone Xs
3.0
New look and feel
Construction/Surveying terminology switch
Full compatibility with MAGNET 5.x suite
Support Topcon and Sokkia GNSS receivers:
- Corrections via Radios and Cell (NTRIP and direct TCP/IP)
- RTK, DGPS
- LongLink™ and LongRange™ communication support
- Support BLE for HiPer VR, GCX3, HiPer HR (requires fw update)
- Support GPS integrated into phone
Support Hybrid™ for Topcon and Fusion™ for Sokkia equipment
Full support of coordinate systems including custom projections, custom datums, geoids and localization
Support most of available Web Map Services as background map
New and Updated Import/Export formats:
- MAGNET XML (*.mxl, *.mxlzip)
- Topcon 3DMC (*.tp3)
- AutoCAD Drawing (*dwg)
- AutoCAD DXF (*.dxf)
- ESRI shape zipped
- LandXML (1.0, 1.2, 2.0) (*.xml)
- SIMA, SIMA Index (*.SIM)
Deviation reports customization
Seamless job backup to cloud
Improved performance for big projects
Editable layers
Multiple background drawings support
Map moving direction/rotation support
Improved stakeout control
Improved 3D map
3.0
2019-03-29
* New look and feel
* Construction/Surveying terminology switch
* Full compatibility with MAGNET 5.x suite
* Support Topcon and Sokkia GNSS receivers
- Corrections via Radios and Cell (NTRIP and direct TCP/IP)
- RTK, DGPS
- LongLink™ and LongRange™ communication support
- Support BLE for HiPer VR, GCX3, HiPer HR (requires fw update)
- Support GPS integrated into phone
* Support Hybrid™ for Topcon and Fusion™ for Sokkia equipment
* Full support of coordinate systems including custom projections, custom datums, geoids and localization
* Support most of available Web Map Services as background map
* New and Updated Import/Export formats
- MAGNET XML (*.mxl, *.mxlzip)
- Topcon 3DMC (*.tp3)
- AutoCAD Drawing (*dwg)
- AutoCAD DXF (*.dxf)
- ESRI shape zipped
- LandXML (1.0, 1.2, 2.0) (*.xml)
- SIMA, SIMA Index (*.SIM)
* Deviation reports customization
* Seamless job backup to cloud
* Improved performance for big projects
* Editable layers
* Multiple background drawings support
* Map moving direction/rotation support
* Improved stakeout control
* Improved 3D map
2.1
2015-08-29
Updated translations, stability improvements.