4.14.2
2024-03-09
Resolve issue with possible crash when use barometric altimeter.
4.14.1
2023-05-26
Fix for anomaly when interface may become unresponsive under iOS 16 when switch to Audio panel.
4.14
2022-08-21
Power Balance UI component on Essential and Segment in-ride screens was added. It works with both - dual-sided power meters (balance can be shown as Left and Right) and with power meters, that don't have separation to Left and Right, but can show absolute power balance shift. Later case is for rear wheel hub and bottom bracket power meters. We also now allow to merge two rides together (usually in case app crashed or stopped) with any time and distance apart. If time or distance are too big, a pause event will automatically be added between merging points.
4.13.3
2022-04-03
Fix for difect that may lead to abnormal application exit during startup
4.13.2
2022-03-18
Improve Rides History interface - easy swap between list and map view of a history
4.13.1
2022-01-20
Minor user interface improvements
4.13
2021-11-23
Improve map experience. Improve Audio Player experience.
4.11.7
2021-06-28
Fixed the anomaly when app may crash when using Power Meter.
4.11.2
2020-11-02
Excludes pauses from ride duration that is reported to Apple Health Kit. Stops counting calories when app is on pause. Few other minor improvements.
4.11.1
2020-08-24
In-App Store link fix
4.11
2020-08-09
History filter by route was added. Minor defects were fixed.
4.10.9
2020-05-26
Fix for abnormality when app may crash during data import
4.10.8
2020-05-08
Minor fixes
4.10.7
2020-05-04
Full map on history ride details is now showing elevation lines for subscription users. Further improvements in Strava integration. Fixed defect that prevent saving Voice Feedback for subscription users. Fixed defect when next song is not automatically played once current finished when ride was ended and new began.
4.10.6
2020-04-24
Strava integration fixed for athlete profiles registered in countries that don't have State / Province.
4.10.1
2020-03-25
Minor fixes for audio player, bluetooth pairing, speed-sensor data processing, handling pauses and resumes for the ride capture
4.9.2
2019-12-08
In-app store defect fix for subscription trial period-related app crash
4.9.1
2019-12-06
In-app store defect fixed that lead to app crash when new subscription is purchased.
4.9
2019-11-27
iOS 13 compatibility issues for Twitter integration and GPX files import were fixed. Support for dual-sided Power Meters (pedals / cranks) was added.
4.8.2
2019-10-19
Fix for anomaly when active subscription appears expired in locales that use non-Gregorian calendars. In-app store minor improvements.
4.8.1
2019-10-13
Support for dark theme in iOS 13 was improved. Better localized number punctuations.
4.8
2019-09-30
Added ability to edit existing segments and create new ones on a route map.
Fixed defect that may indicate unreasonably high maximum speed when GPS signal is weak.
iOS 13 compatibility improvements.
4.7.1
2019-07-29
Minor defects fixed
4.7
2019-06-15
Added the ability to select or change a route during the ride. Application shows routes that are within 1 mile of ride's current location - path will be added to a map. Minor interface improvements.
4.6
2019-05-15
Altitude accuracy improved for devices with barometric altimeter. Segment sensing improved during ride and for the history. New screen with power and cadence data added to watch companion app. Minor fixes and interface improvements.
4.5.2
2019-01-09
*Fix - update of weather reporting service from Yahoo to DarkSky
4.5.1
2018-10-18
Minor usability improvements
3D ride video recording available without subscription
Strava integration changes
4.5
2018-09-12
*Power Curve added to Ride Details. User may look at the individual ride power curve as well as how it is positioned compare to other rides.
*Ride animated map can be recorded as a video that can be saved and/or shared
*Backup and restore process was optimized to be faster and more reliable
*Minor improvements and fixes
4.4
2018-08-29
*Route name is now shown on a ride history when ride is based on a route
*Ability to change a segment title was added as well as to show segment profile and larger map
*Auto-assignment of a route to a ride based on geo-data now works more precise
*Ability to re-apply geo locations to a route from any matching rides (specifically to have altitude values more precise) was added
*Fix for the issue when application may crash during the use of offline maps with a route
*Minor improvements and fixes
4.3.1
2018-08-09
*Ability to change a bike for particular ride was added on a ride details interface
*Fix for crash in Voice Feedback interface when taping any switcher
*Fix for crash if access a Bike History of a newly entered (not yet saved) bike
*Fix for missing localizations in Bike History interface
4.3
2018-08-05
*Bike odometer (milage) added. Increments automatically at the end of each ride with ability to override manually
*Bike events tracker added (chain replacement, tires, accidents, etc.). Includes automatic odometer and date of event with ability to override manually
*Manual route assignment to a ride now allow user to pick if more than one matching route found
*Minor improvements and fixes
4.2
2018-08-01
*Improve user interface for outdoor use - it is now more contrast and easy to see in bright daylight conditions
*Fix error preventing to import GPX file as new route if it has no timestamps in trkpt element
*Improve path drawing on offline maps (routes and during the ride) showing direction with increasing dash length
4.1
2018-06-18
*Updated Bikes interface
*User consent form added for EU GDPR requirements
*Stability improvements
4.0
2018-05-23
*Switched to subscription model for optional features (previous purchases will still be honored)
*Offline maps - enable Route to be offline and it will be using offline map while riding that Route
*Fix for some locales incorrect translations on interfaces
3.7.1
2018-05-14
*Direct Strava export added. Manually export any History record or automatically export at the end of a ride (requires History Tracking option purchase)
*Stability improvements
3.7
2018-05-14
*Direct Strava export added. Manually export any History record or automatically export at the end of a ride (requires History Tracking option purchase)
*Stability improvements
3.6
2018-04-23
Minor interface improvements and stability fixes.
3.5.3
2018-01-11
+In free version users can have a limited access to Rides History (with condition)
+Single set of Units now separated into Distance, Temperature and Weight
+Export is now using iOS standard Share dialog. Users can share Ride's Info Image on any app on a phone that can accept the image. Files also can be exported to any app that can accept TCX, GPX or MCL file types
+Fix: Average Speed calculation was improved - now it will not mess the result if you changed distance units during the ride
3.5.2
2017-12-13
Cycling season ended? No problem! MiCycle apps now have a trainer mode! Keep riding on a trainer with at least a speed sensor (cadence, power meter and heart rate are always a plus!) and record your rides for history and analysis. You will get most out of trainer feature if you purchase a History Tracking option (or bundle that includes it).
3.5.1
2017-11-06
•Fixed: auto-resume works again when auto-paused if speed source is a GPS signal
•Fixed: if application crashed for any reason during the ride - the passed part of it will still be recorder
•New feature: from ride details interface user now may merge it with the next one (useful in case the app crashed during the ride and user initiated a new ride after the crash). Combined ride will have merged data, locations, events and segments.
3.5
2017-10-22
+ The Segments were added to mark parts of a ride with their own average metrics and profile. Following features for segments are available:
• segments can be manually start / stop and viewed during the ride (slide the main ride interface left/right)
• during the ride a segment will show an elevation profile with location marker (if found match) or current grade level along with immediate, maximum and average speed and power for this segment
• segments can be observed for stored rides on details interface (use bottom tab bar) and visually compared with each other
• segments can be manually or automatically recorded if they were ridden previously by matching their locations. Auto-recording of segments can be enabled or disabled in settings
• segments are shown on ride chart as grey bars next to mile/kilometer markers
• routes and segments feature can be optionally purchased in in-app store (it require to have a Rides history option). There is a bundle store option that includes both - History as well as Routes and Segments
+ Routes now can be manually or automatically matched to the finished/existing rides.
+ In iOS 11 Apple removed some APIs related to social media, including Twitter and Facebook. We revised the social networks-related features accordingly
+ When import the ride via MCL file or restore rides from a backup we now create the correspondent activity records in Apple Health Kit. Be careful, though - if you import the same ride several times, it will create several records in a Health Kit. If this happened - you can remove them later via Health app.
+ If ride was manually paused and then you started to move - there will be a popup reminder to resume or ignore (and keep pausing). Popup will also be accompanied by the distinct sound.
3.4.2
2017-09-12
+ Statistics interface was added to menu to display overall, last and this month ride statistics
+ Apple Watch heart rate sensor now can be used to track the heart rate (WatchOS 3 is required)
+ Ride sharing via email now includes TCX and GPX attachments (to import ride information into Strava or similar online services). GPX includes basic track points; TCX also includes Heart Rate, Cadence, Power and more.
+ Fix: map orientation is now done via GPS course rather than via magnetic compass when moving (it is way more precise that way)
+ Fix: disable idle timer (screen auto-dimming) when ride starts from the existing route
+ Fix: minor display and navigation improvements, including larger fonts for in-ride data screen
3.4.1
2017-08-18
+ Include Routes into Backup / Restore process
+ Include the ride weather data into backup and export
+ Improve rendering quality of the route path
+ Riding existing route now can be done even if you are more than 1 km/0.7 mi away from its start
3.4
2017-07-29
* The riding map now faces the riding direction (e.g. riding course)
* Routes feature was added:
- import the route from GPX file (as email attachment)
- share route (export as GPX via email attachment)
- convert Ride to Route
- place existing route path to be shown on a ride map when ride again
- automatically show the driving directions if rider is too far from a route start point
- ride the existing route from start or from finish (e.g. in opposite direction)
* Elevation profile was changed to be shown based on distance (previously it was based on time/speed time)
* Fix for the finish wind conditions on ride details interface
* The age taken from Health App is now properly rounded to number of years
* Fix for occasional crash during backup rides to iCloud on large datasets
3.3
2017-07-01
* Fix for voice feedback distance-based frequency (it was always defaulting to 1mi / 1km before)
* Weather lookup service added to store Ride start and finish weather conditions (weather type, wind strength and direction, temperature)
* Include Elevation Profile into Ride Details and when share Ride via email, message or FB
* Resolved problem with incorrectly marking ride as “finished” when bring app to foreground. This also fixed issue with double posting workout data to Health App
3.2.1
2017-06-06
* Sensor batteries in a voice feedback were added
* Fix for a problem when free version may stuck with Import if no History option was purchased
* Phone now will not go to sleep while performing a backup
* Fix for a problem when MiCycle on Apple Watch may not link with counterpart on iPhone in some configurations
* Fix for a heart rate sensor: to make it available in free version without purchase of advanced sensors option
3.2
2017-05-25
* Support for Power Meter and Cadence sensors added
* Power and Cadence data shown on main display, details’ snapshots and on charts
* Backup to / Restore from iCloud replaced the email-based backup
* Colors for main display improved for outdoor use
* Speed and Distance will be calculated from Speed Sensor if available
* Minor defects were fixed, including link to wrong support form and Japanese localization
3.1.1
2017-05-03
Fixed the memory issues with a data migration from iCloud to a local storage.
IMPORTANT: It your installed version is earlier than 3.1 and you purchased History option - please perform a data backup first (Export option in main menu) before the upgrade.
3.1
2017-04-20
Improvements and Fixes
* IMPORTANT! As a precautions measure before you install the update, please BACKUP existing data by using Export feature (Export item in main Menu).
* iCloud data synchronization functionality was depreciated in iOS 10 and will be removed in future versions. In this version of MiCycle we are migrating data back to use only a local storage. Starting from this version rides will only be stored on a device. To transfer to another your device or restore after re-install please use the Export / Import feature of MiCycle application
* Added a control to enable and setup the Auto-end (finish)
* “Show Map” control was removed from settings as it was a duplication. Use the switch on a main screen instead.
* Export of ride/rides to file compresses the file better (it is smaller now)
* Import from file/mail attachment is now “incremental” (e.g. already existing rides will be skipped)
* Import will no longer create duplicated potholes
* Import will auto-resume upon next application launch if crashed during the import. Already imported data will be skipped.
* Import can now be cancelled
* Minor defects were fixed and memory usage was optimized.
2.7.3
2016-10-27
*Minor improvements