Nice Wi-Fi
Free
23.08for iPhone, iPod touch
Age Rating
Nice Wi-Fi Screenshots
About Nice Wi-Fi
Nice Wi-Fi is an application that allows you to remotely control your home automation, such as automatic gates (sliding and swinging), garage doors, blinds, awnings, sun screens etc - via an electronic module (available under the same name in the distribution network of Nice-Poland).
The relay, potential-free output of the module allows to expand it’s use for all types of devices and systems that need to be switched on/off at theirs control input with the potential free NC-NO signal.
The output relay contacts (5A / 250AC) can also be used for the direct current/voltage control within the specified limits.
What's more, the two sensors’ inputs in the module allow the operator to receive a feedback from the application, for example, when the remotely controlled gate reaches one of the end positions (open, closed).
The open-source SUPLA project, part of which our application and the module are, gives the creative User unlimited access to a vast array of applications, completely unrelated to home automation. The only limitation of the use will be the imagination and invention of the User.
The relay, potential-free output of the module allows to expand it’s use for all types of devices and systems that need to be switched on/off at theirs control input with the potential free NC-NO signal.
The output relay contacts (5A / 250AC) can also be used for the direct current/voltage control within the specified limits.
What's more, the two sensors’ inputs in the module allow the operator to receive a feedback from the application, for example, when the remotely controlled gate reaches one of the end positions (open, closed).
The open-source SUPLA project, part of which our application and the module are, gives the creative User unlimited access to a vast array of applications, completely unrelated to home automation. The only limitation of the use will be the imagination and invention of the User.
Show More
What's New in the Latest Version 23.08
Last updated on Aug 24, 2023
Old Versions
Adjustment of the application to be functionally equal to the SUPLA v23.08 application
Show More
Version History
23.08
Aug 24, 2023
Adjustment of the application to be functionally equal to the SUPLA v23.08 application
2.3.31
Dec 22, 2020
Add wizard improvements
2.3.28
Dec 17, 2020
The wizard for adding devices has been improved.
2.3.27
Dec 11, 2020
- Dimmer - Minor fix,
- Improvements to the Varilight dimmer configuration settings window,
- Spanish translation corrections,
- Change of markings in the user interface of the Heatpol Home + heater,
- Solved the problem of deleting and re-downloading energy / gas / water meter history data,
- The amount of data downloaded to charts during a single request has been increased,
- The roller shutter control window has been redesigned,
- Support for roof windows has been introduced,
- The ability to change the status diode settings from the application level for V-Pro Smart dimmers has been introduced,
- Information about the firmware version of the dimming chip has been added to the V-Pro Smart dimmer configuration window,
- Add wizard - automatic connection to the device's wifi in the background without having to go to the system settings (requires iOS version 13.0 or higher).
- Improvements to the Varilight dimmer configuration settings window,
- Spanish translation corrections,
- Change of markings in the user interface of the Heatpol Home + heater,
- Solved the problem of deleting and re-downloading energy / gas / water meter history data,
- The amount of data downloaded to charts during a single request has been increased,
- The roller shutter control window has been redesigned,
- Support for roof windows has been introduced,
- The ability to change the status diode settings from the application level for V-Pro Smart dimmers has been introduced,
- Information about the firmware version of the dimming chip has been added to the V-Pro Smart dimmer configuration window,
- Add wizard - automatic connection to the device's wifi in the background without having to go to the system settings (requires iOS version 13.0 or higher).
2.3.19
Sep 4, 2020
- Communication library update.
- "Host not found" message if it is not possible to set the server address based on the email address,
- Add device wizard - Enable update for all devices with the online update option available,
- Support for heat meters and valves with flood sensor,
- The update fixes an error crashing the application when downloading data for the humidity chart when the value downloaded is less than zero,
- Quicksand font update,
- Vector and arithmetic balance charts have been added,
- The display of data from the vector balance has been introduced,
- Phase-to-balance balance charts have been improved,
- Channel details - the channel caption has been moved from the footer to the header,
- Channel details - back button added,
- Dimmer / RGB window has been redesigned,
- V-Pro dimmer configuration window has been redesigned,
- Explanations for the V-Pro dimmer have been added,
- The option of choosing a slider instead of a wheel has been introduced,
- Additional clarifications have been introduced. Explanations are displayed by touching the warning icon,
- The ability to display several additional information about the channel has been introduced. Among others: IP address, mac address, WiFi signal quality or module uptime,
- The ability to change the light source lifespan settings from the application level has been introduced,
- An alternative icon (UV) has been added for the light switch,
- Implemented automatic enabling of adding devices from the add wizard after entering primary user credentials,
- Solved an issue that occurs when retrieving data into a chart that contains values out of range,
- Improvements to the Varilight dimmer configuration settings window,
- Slider, dimmer wheel/RGB - allows the pointer to jump quickly to the point you touch,
- Superuser authorization window - added a procedure to check if the user is already authorized in order not to ask for a password again.
- "Host not found" message if it is not possible to set the server address based on the email address,
- Add device wizard - Enable update for all devices with the online update option available,
- Support for heat meters and valves with flood sensor,
- The update fixes an error crashing the application when downloading data for the humidity chart when the value downloaded is less than zero,
- Quicksand font update,
- Vector and arithmetic balance charts have been added,
- The display of data from the vector balance has been introduced,
- Phase-to-balance balance charts have been improved,
- Channel details - the channel caption has been moved from the footer to the header,
- Channel details - back button added,
- Dimmer / RGB window has been redesigned,
- V-Pro dimmer configuration window has been redesigned,
- Explanations for the V-Pro dimmer have been added,
- The option of choosing a slider instead of a wheel has been introduced,
- Additional clarifications have been introduced. Explanations are displayed by touching the warning icon,
- The ability to display several additional information about the channel has been introduced. Among others: IP address, mac address, WiFi signal quality or module uptime,
- The ability to change the light source lifespan settings from the application level has been introduced,
- An alternative icon (UV) has been added for the light switch,
- Implemented automatic enabling of adding devices from the add wizard after entering primary user credentials,
- Solved an issue that occurs when retrieving data into a chart that contains values out of range,
- Improvements to the Varilight dimmer configuration settings window,
- Slider, dimmer wheel/RGB - allows the pointer to jump quickly to the point you touch,
- Superuser authorization window - added a procedure to check if the user is already authorized in order not to ask for a password again.
2.3.3
Nov 12, 2019
Add Device Wizard - an issue in which the email address contained a + sign has been resolved
2.3.2
Nov 4, 2019
Support for electricity meters
Support for pulse counter (energy, gas, water)
Support for pressure, wind and rain sensors
Weight support
Displaying user icons
Temperature and humidity charts
Slovak, Slovenian, Norwegian, Greek and Dutch translations
Additional filters for energy / water / gas consumption charts.
Collapsing the location
Change the location background
Storing GUID and AuthKey in the iOS keychain
Small fixes and improvements
The error occurring when changing from summer to winter time has been fixed
Support for pulse counter (energy, gas, water)
Support for pressure, wind and rain sensors
Weight support
Displaying user icons
Temperature and humidity charts
Slovak, Slovenian, Norwegian, Greek and Dutch translations
Additional filters for energy / water / gas consumption charts.
Collapsing the location
Change the location background
Storing GUID and AuthKey in the iOS keychain
Small fixes and improvements
The error occurring when changing from summer to winter time has been fixed
2.2.3
Aug 9, 2018
-PL-
Drobne usprawienia
-EN-
Small improvements
Drobne usprawienia
-EN-
Small improvements
2.2.2
Aug 1, 2018
-EN-
Small improvements
-PL-
Drobne usprawnienia
Small improvements
-PL-
Drobne usprawnienia
2.2.1
Jun 14, 2018
-PL-
- Obsługa grup
- Automatyczne ukrywanie przycisku po jego naciśnięciu
- Prezentowanie częściowego otwarcia bramy
- Tworzenie nowego konta w oknie aplikacji
- Wersja Litewska
- Wsparcie dla protokołu v9
- Poprawki
- Zrównanie wersji z wersją CLOUD-a (wg. nowej polityki wersjonowania)
- Wsparcie dla protokołu IPv6
-EN-
- channel group support
- buttons hidden automatically when being touched
- gate half-opening if
- new account creation in application window
- Lithuanian version
- v9 protocol support
- version adjusted to CLOUD
- fixes
- IPv6 Support
- Obsługa grup
- Automatyczne ukrywanie przycisku po jego naciśnięciu
- Prezentowanie częściowego otwarcia bramy
- Tworzenie nowego konta w oknie aplikacji
- Wersja Litewska
- Wsparcie dla protokołu v9
- Poprawki
- Zrównanie wersji z wersją CLOUD-a (wg. nowej polityki wersjonowania)
- Wsparcie dla protokołu IPv6
-EN-
- channel group support
- buttons hidden automatically when being touched
- gate half-opening if
- new account creation in application window
- Lithuanian version
- v9 protocol support
- version adjusted to CLOUD
- fixes
- IPv6 Support
1.6.6
May 9, 2018
-PL-
Interfejs użytkownika w wersji czeskiej
-EN-
User interface in the Czech version
Interfejs użytkownika w wersji czeskiej
-EN-
User interface in the Czech version
1.6.5
Apr 7, 2018
-PL-
Aktualizacja biblioteki SSL
-EN-
SSL library update
Aktualizacja biblioteki SSL
-EN-
SSL library update
1.6.4
Jan 30, 2018
-PL-
Poprawki
-EN-
Fixes
Poprawki
-EN-
Fixes
1.6.2
Dec 7, 2017
- Obsługa nowych modułów
- Wsparcie dla alternatywnych ikon
- Kreator dodawania urządzeń
- Kompatybilność z najnowszym protokołem v8
- 8 wersji językowym
- Uproszczona konfigurację
- Drobne poprawki
- Wsparcie dla alternatywnych ikon
- Kreator dodawania urządzeń
- Kompatybilność z najnowszym protokołem v8
- 8 wersji językowym
- Uproszczona konfigurację
- Drobne poprawki
1.1
Sep 6, 2017
Obsługa nowych statusów
1.0
Jul 15, 2017
Nice Wi-Fi FAQ
Click here to learn how to download Nice Wi-Fi in restricted country or region.
Check the following list to see the minimum requirements of Nice Wi-Fi.
iPhone
Requires iOS 12.0 or later.
iPod touch
Requires iOS 12.0 or later.
Nice Wi-Fi supports English, Czech, Dutch, French, German, Greek, Italian, Lithuanian, Norwegian Bokmål, Polish, Portuguese, Russian, Slovak, Slovenian, Spanish, Ukrainian
