Smartvest
Free
1.7.29for iPhone, iPad and more
7.9
9 Ratings
ABUS Security Center GmbH & Co. KG
Developer
102.3 MB
Size
Nov 20, 2023
Update Date
Productivity
Category
4+
Age Rating
Age Rating
Smartvest Screenshots
About Smartvest
Remark: Upon initial start up, pls. perform an Firmware Update of your Alarm Panel by following the advices in the App.
Smart and reliable all-round security for your home for easy DIY installation
With the Smartvest App, you can configure and operate your Smartvest wireless alarm system. Up to 32 wireless components and 4 cameras offer all-round security. The components and cameras are set up with only a few clicks using the Smartvest App.
Live access via app any time and any place
Using the Plug & Play internet access you can access your wireless alarm system without additional setup at the router. The Smartvest App offers state overview of all components, activating and deactivating of the wireless alarm system and access to live video data.
Setup of individual scenarios
The Smartvest App makes it possible to create individual scenarios. These can increase comfort or security, depending on the users’ requirement, by e.g. activating wireless power sockets triggered by motion detection for automatic illumination or starting the video recording on opening magnet contacts to detect intrusion.
Creating individual groups
In the control menu up to 9 individual groups can be created. These enable the operation of all used actors, e.g. wireless power sockets, with one click. Furthermore, it can be defined, which sensors trigger an alarm when activated and which actors should react. The setup of a partial activation is also possible.
Reliable event notification with video images of up to 4 cameras
The message function instantly notifies the user about every event. The recorded image data in the event list can be played back as well as saved on mobile end devices. With the help of the snapshot function single images can be saved on mobile end devices.
The most important Smartvest App features:
• Plug & Play: easy installation and operation
• Up to 32 wireless components can be integrated
• Up to 4 cameras and/or Home Video Surveillance set can be integrated (TVAC19x00, TVAC16000, PPIC3xxx0, PPIC4x520, PPIC9xxx0)
• Activating/deactivating of the Smartvest
• Setup of groups and scenarios
• Live view and playback of recorded video data
• Display of the state overview and event list with up to 1,000 entries
• Notification and e-mail function
Available Languages:
- German
- English
- French
- Dutch
- Italian
- Spanish
- Danish
- Swedish
Supported Products:
FUAA35000A
Smart and reliable all-round security for your home for easy DIY installation
With the Smartvest App, you can configure and operate your Smartvest wireless alarm system. Up to 32 wireless components and 4 cameras offer all-round security. The components and cameras are set up with only a few clicks using the Smartvest App.
Live access via app any time and any place
Using the Plug & Play internet access you can access your wireless alarm system without additional setup at the router. The Smartvest App offers state overview of all components, activating and deactivating of the wireless alarm system and access to live video data.
Setup of individual scenarios
The Smartvest App makes it possible to create individual scenarios. These can increase comfort or security, depending on the users’ requirement, by e.g. activating wireless power sockets triggered by motion detection for automatic illumination or starting the video recording on opening magnet contacts to detect intrusion.
Creating individual groups
In the control menu up to 9 individual groups can be created. These enable the operation of all used actors, e.g. wireless power sockets, with one click. Furthermore, it can be defined, which sensors trigger an alarm when activated and which actors should react. The setup of a partial activation is also possible.
Reliable event notification with video images of up to 4 cameras
The message function instantly notifies the user about every event. The recorded image data in the event list can be played back as well as saved on mobile end devices. With the help of the snapshot function single images can be saved on mobile end devices.
The most important Smartvest App features:
• Plug & Play: easy installation and operation
• Up to 32 wireless components can be integrated
• Up to 4 cameras and/or Home Video Surveillance set can be integrated (TVAC19x00, TVAC16000, PPIC3xxx0, PPIC4x520, PPIC9xxx0)
• Activating/deactivating of the Smartvest
• Setup of groups and scenarios
• Live view and playback of recorded video data
• Display of the state overview and event list with up to 1,000 entries
• Notification and e-mail function
Available Languages:
- German
- English
- French
- Dutch
- Italian
- Spanish
- Danish
- Swedish
Supported Products:
FUAA35000A
Show More
What's New in the Latest Version 1.7.29
Last updated on Nov 20, 2023
Old Versions
• new firmware for compatibility with PPIC91000
Show More
Version History
1.7.29
Nov 20, 2023
• new firmware for compatibility with PPIC91000
1.7.26
Jun 12, 2023
New with this app update:
- Access to live images of the new ABUS Wi-Fi Light Outdoor Camera (part no. PPIC46520). Highlights of the security camera: All-in-one device with full outdoor light, object detection (person, animal, vehicle), siren, intercom function, color images even at night & much more.
- Access to live images of the new ABUS Wi-Fi Light Outdoor Camera (part no. PPIC46520). Highlights of the security camera: All-in-one device with full outdoor light, object detection (person, animal, vehicle), siren, intercom function, color images even at night & much more.
1.7.24
Jan 24, 2022
System time is now displayed in the advanced settings
1.7.23
Nov 16, 2021
- Integration of the PPIC31020, PPIC42520, PPIC44520 cameras
- Devices can be found in the local network again
- Fixing of problems in combination with iOS15
- General bug fixes
- Devices can be found in the local network again
- Fixing of problems in combination with iOS15
- General bug fixes
1.7.15
Feb 11, 2021
Bug fix:
Problems with calling a preset position with TVAC19000 was fixed.
Problems with displaying recordings TVAC19x00 was fixed.
Problems with selecting all cameras in the hotkey view were fixed.
Textual and graphical adjustments.
Minor bug fixes.
New:
Battery camera integration into the Smartvest system has been implemented. You can now integrate your battery camera into your Smartvest system. For the integration, the battery camera must first be integrated into the network via the App2Cam Plus.
You can find the current instructions at www.abus.com/product/FUAA35001A.
Problems with calling a preset position with TVAC19000 was fixed.
Problems with displaying recordings TVAC19x00 was fixed.
Problems with selecting all cameras in the hotkey view were fixed.
Textual and graphical adjustments.
Minor bug fixes.
New:
Battery camera integration into the Smartvest system has been implemented. You can now integrate your battery camera into your Smartvest system. For the integration, the battery camera must first be integrated into the network via the App2Cam Plus.
You can find the current instructions at www.abus.com/product/FUAA35001A.
1.7.14
Jan 22, 2020
Error correction:
Remote access problems have been fixed.
Adjustments to the GUI of the alarm page
IOS 13 Adjustments
New:
The weather function was newly implemented. This can be found under Settings/Components/Gateway. Please read the notes thoroughly and follow the instructions
The current instructions can be found at www.abus.com/product/FUAA35001A.
Remote access problems have been fixed.
Adjustments to the GUI of the alarm page
IOS 13 Adjustments
New:
The weather function was newly implemented. This can be found under Settings/Components/Gateway. Please read the notes thoroughly and follow the instructions
The current instructions can be found at www.abus.com/product/FUAA35001A.
1.7.10
Feb 15, 2019
New functions:
Hazard detector alarm: Implementation of the basic functions of the hazard alarm.
Inevitability function: The system alerts you to open detectors when you try to activate the system.
Troubleshooting:
(IOS): Troubleshooting scenarios usage
Troubleshooting push problems
Setting of the signal tone for deactivation possible
Minor bug fixes
Attention:
The weather function is currently deactivated, we continue to work on a solution.
The current Smartvest instructions can be found at :
https://www.abus.com/ger/Sicherheit-Zuhause/Alarmanlagen/Smartvest-Funk-Alarmanlage/Alarmzentrale-und-Sets/Smartvest-Funk-Alarmanlage-App-Zentrale
Hazard detector alarm: Implementation of the basic functions of the hazard alarm.
Inevitability function: The system alerts you to open detectors when you try to activate the system.
Troubleshooting:
(IOS): Troubleshooting scenarios usage
Troubleshooting push problems
Setting of the signal tone for deactivation possible
Minor bug fixes
Attention:
The weather function is currently deactivated, we continue to work on a solution.
The current Smartvest instructions can be found at :
https://www.abus.com/ger/Sicherheit-Zuhause/Alarmanlagen/Smartvest-Funk-Alarmanlage/Alarmzentrale-und-Sets/Smartvest-Funk-Alarmanlage-App-Zentrale
1.6.13
Jul 6, 2018
New Features:
Separate Push notification tone in case of Alarm
The Smartvest can now be armed/disarmed by the Door Intercom PPIC35520
Doorbell and motion detection of PPIC35520 now are separate scenario trigger
Bug-fixes:
User terms statement has been adjusted
Further minor bug-fixes
Separate Push notification tone in case of Alarm
The Smartvest can now be armed/disarmed by the Door Intercom PPIC35520
Doorbell and motion detection of PPIC35520 now are separate scenario trigger
Bug-fixes:
User terms statement has been adjusted
Further minor bug-fixes
1.6.10
May 29, 2018
The terms of use for our app have been added
1.6.7
Apr 23, 2018
New Functions
- Improvements of display and functionality for iPhone X
- Preparation for new Smartvest sensors
Bug-Fixes
- Fixed a bug, where the app could close after the status is changed on iOS Version 11.3
- Fixed a bug, which led to unreliability of the Gateway-Doorbell
- Fixed a bug, which could appear on the update-process with a gateway firmware version 124 or lower
- Fixed a bug, which led to a wrong signal loss notification of the Smartvest Wireless Smoke/Heat detector
- Fixed a bug, which could appear when entering a camera name
Further information
- To receive further Email notifications it is necessary to verify the registered Email-address! Further details have been added in the Settings for Email-notification
- Improvements of display and functionality for iPhone X
- Preparation for new Smartvest sensors
Bug-Fixes
- Fixed a bug, where the app could close after the status is changed on iOS Version 11.3
- Fixed a bug, which led to unreliability of the Gateway-Doorbell
- Fixed a bug, which could appear on the update-process with a gateway firmware version 124 or lower
- Fixed a bug, which led to a wrong signal loss notification of the Smartvest Wireless Smoke/Heat detector
- Fixed a bug, which could appear when entering a camera name
Further information
- To receive further Email notifications it is necessary to verify the registered Email-address! Further details have been added in the Settings for Email-notification
1.5.13
Dec 15, 2017
Bug-Fixes:
- The App works again with iPhone X
- The Smartvest does not reboot permanently anymore after FW-Update
- Playback of TVAC16000 camera-streams has been improved
- Scenarios with configuration “…then Wireless-Socket off” are performed again
Notice:
- To receive further Email notifications it is necessary to verify the registered Email-address! Further details have been added in the Settings for Email-notification.
Next steps / in progress:
- Further adjustments on the new screen format of iPhone X are necessary
- Reliable trigger of the Alarmpanel-Doorbell will be optimized
- In case the Firmware version of your Alarmpanel is 124 or smaller, our Service hotline will help you to process the update
- The App works again with iPhone X
- The Smartvest does not reboot permanently anymore after FW-Update
- Playback of TVAC16000 camera-streams has been improved
- Scenarios with configuration “…then Wireless-Socket off” are performed again
Notice:
- To receive further Email notifications it is necessary to verify the registered Email-address! Further details have been added in the Settings for Email-notification.
Next steps / in progress:
- Further adjustments on the new screen format of iPhone X are necessary
- Reliable trigger of the Alarmpanel-Doorbell will be optimized
- In case the Firmware version of your Alarmpanel is 124 or smaller, our Service hotline will help you to process the update
1.5.7
Nov 20, 2017
New Features:
Hotkey-Features:
- Hotkey-Names can be set individually now
Scenario Configuration
- Separate Scenario for Door-contacts on status open and closed
- Scenario-trigger Sunrise / Sundown cab be set
- Alarm-Panel can work as Doorbell now
Entry,- Exitdelay
- Interval can now be set (10, 20, 30, 60 Sec.)
- Acoustical Signal for the Alarm-Panel can be set
Notifications
- Can now be selected by Type (Alarm, Status-change, Battery low…)
- Notifications show the configured Smartvest Name (instead of the DID)
- Notification can now be selected by Language
Extra:
- Device-Type Waterleak-Detector FUWM35000A added
- Camera-models PPIC34520, PPIC32520, PPIC32020 added
- SMS-Service cmtelecom.com added
- Added new features in the manual (6.1 Feature Update)
- Links to FAQ-Videos added
- Service-remote-access set-up
Notes:
- The Location-setting for the Smartvest-Alarmpanel is now consistent for all users (to clearly assign the time of Sunrise,- Sundown)
- The Smartvest Name is now consistent for all users (to clearly assign the System-Name for Notifications)
- TVAC16000 Recordings can not be played in the Smartvest Eventlist anymore, please use the APP2CAM APP or the Monitor instead.
Hotkey-Features:
- Hotkey-Names can be set individually now
Scenario Configuration
- Separate Scenario for Door-contacts on status open and closed
- Scenario-trigger Sunrise / Sundown cab be set
- Alarm-Panel can work as Doorbell now
Entry,- Exitdelay
- Interval can now be set (10, 20, 30, 60 Sec.)
- Acoustical Signal for the Alarm-Panel can be set
Notifications
- Can now be selected by Type (Alarm, Status-change, Battery low…)
- Notifications show the configured Smartvest Name (instead of the DID)
- Notification can now be selected by Language
Extra:
- Device-Type Waterleak-Detector FUWM35000A added
- Camera-models PPIC34520, PPIC32520, PPIC32020 added
- SMS-Service cmtelecom.com added
- Added new features in the manual (6.1 Feature Update)
- Links to FAQ-Videos added
- Service-remote-access set-up
Notes:
- The Location-setting for the Smartvest-Alarmpanel is now consistent for all users (to clearly assign the time of Sunrise,- Sundown)
- The Smartvest Name is now consistent for all users (to clearly assign the System-Name for Notifications)
- TVAC16000 Recordings can not be played in the Smartvest Eventlist anymore, please use the APP2CAM APP or the Monitor instead.
1.3.19
Apr 4, 2017
- Access from KPN Mobile Network is now enabled.
- Eventlist Selection (Start/End-Time) is now working again.
- Further Bug-Fixes.
- Eventlist Selection (Start/End-Time) is now working again.
- Further Bug-Fixes.
1.3.18
Mar 6, 2017
- App crashes, occurred on several IOS-Devices have been fixed.
1.3.17
Feb 24, 2017
- the Smartvest Alarm-Panel now restores the Network-connection by its own without reboot.
1.3.14
Jan 30, 2017
- Security-Mechanism for the defence against Replay-Attacks has been implemented (for Remote Control)
- Upon Network-Loss, the Alarm-Panel re-establishes Internet-connection automatically again.
- Upon Network-Loss, the Alarm-Panel re-establishes Internet-connection automatically again.
1.3.5
Dec 12, 2016
Firmware Alarm-Panel
- Battery-Change Trouble remains active on the Overview Page for as long as the Battery-Change has been done
- In Test mode, Events are now shown again (also PIR-Detector Events)
- Timeplan Settings are performed continuously now (in a row)
- The Auto-off function for the Wireless-Switch in Scenario-mode works correctly now.
- A Sabotage-contact released in maintenance mode does not release an alarm anymore
- The Alarm-Panel Status-light appears correctly for open/close of multiple Magnetic-contacts.
- The Outdoor-Siren now also flashes shortly upon activation / internal activation
- Supervision of a component releases a push notification from now on.
- In Test-mode, the system can now be disarmed via Remote-Control
- The tariff “Basic” for the optional Email to SMS service has been removed due to being discontinued by 01st Dec
IOS-App:
- Timeplan Settings related to summer/wintertime has been corrected
- Go to / Save Preset Position for TVAC19000 Cam are in correct order now
- Crashes with IOS 10 Systems are now removed
- Corrections on several Text-Stings in extended Camera Settings
- Camera-Thumbnail picture is now updated upon each Camera Overview call
- Cameras already paired are not shown in the camera pairing process anymore
- For iPad: better rendering of the main-section-headlines fitted to the Screen-size
- PDF-Manual is now updated to version 1.3
- Battery-Change Trouble remains active on the Overview Page for as long as the Battery-Change has been done
- In Test mode, Events are now shown again (also PIR-Detector Events)
- Timeplan Settings are performed continuously now (in a row)
- The Auto-off function for the Wireless-Switch in Scenario-mode works correctly now.
- A Sabotage-contact released in maintenance mode does not release an alarm anymore
- The Alarm-Panel Status-light appears correctly for open/close of multiple Magnetic-contacts.
- The Outdoor-Siren now also flashes shortly upon activation / internal activation
- Supervision of a component releases a push notification from now on.
- In Test-mode, the system can now be disarmed via Remote-Control
- The tariff “Basic” for the optional Email to SMS service has been removed due to being discontinued by 01st Dec
IOS-App:
- Timeplan Settings related to summer/wintertime has been corrected
- Go to / Save Preset Position for TVAC19000 Cam are in correct order now
- Crashes with IOS 10 Systems are now removed
- Corrections on several Text-Stings in extended Camera Settings
- Camera-Thumbnail picture is now updated upon each Camera Overview call
- Cameras already paired are not shown in the camera pairing process anymore
- For iPad: better rendering of the main-section-headlines fitted to the Screen-size
- PDF-Manual is now updated to version 1.3
1.2.3
Jun 14, 2016
- Amendments on the following Language-Versions: FR, NL, DK, IT, SE, SP
- Bug-Fixes
- Bug-Fixes
1.1.1
May 11, 2016
Smartvest FAQ
Click here to learn how to download Smartvest in restricted country or region.
Check the following list to see the minimum requirements of Smartvest.
iPhone
Requires iOS 12.0 or later.
iPad
Requires iPadOS 12.0 or later.
iPod touch
Requires iOS 12.0 or later.
Smartvest supports English, Danish, Dutch, French, German, Italian, Polish, Spanish, Swedish
