18.0
2023-04-17
A "Shot-filter" in Sound start.
Improved amplification in Hand/mic.
Improved routines and feedback when saving Base videos.
A close button in "remote recording" in Start Sender.
17.9
2022-12-07
A time format setting in the export.
Fixed some problems in Self start and Flying sprint on iOS 16.
17.8
2022-05-21
- The recording start time and recording length on the finish device can be set from Start Sender.
- The race name in the save dialog can be applied to a results list even if no image or video is saved.
- The human detection in Start Sender can be set to "always on".
17.7
2022-04-06
Improvements when using an external monitor.
Fixed problems uploading base videos to iCloud and when saving long Video Finish videos.
17.6.1
2021-11-14
Fixed a problem that could cause the time to be displayed as 0.00 in Photo Finish.
17.5
2021-10-19
Stride length and acceleration measurement in Flying Sprint.
17.4
2021-06-17
The sensitivity for external microphones can be set.
16.2
2020-12-31
This release is mainly about stability improvements and bug fixes. Details can be found in "what's new" in the guide.
16.1
2020-12-11
Support for Bluetooth gamepads as remote controllers.
16.0.1
2020-11-17
Version 16.0.1 fixes a bug in the QR-code detection.
New in v. 16.0:
Motion and Instant Finish
- A Manual mode has been added. Tap on the screen to save one image/time.
- The motion detection at high frame rates has been improved.
- The direction setting has been removed, but the motion detection zone is draggable (and pinchable) in the Preview.
- A new Reset the clock at first pass in Instant finish. This gives a motion-triggered start that can be useful for e.g. shuttle tests.
- There is a new Set Up in the Video finish view. It allows you to change direction after the race, which affects the Dual mode.
- A Human detection mode has been added. Images/times are saved when the camera detects a human.
- QR code detection in Instant Finish. Times and code content are saved (one per code) when the camera detects a QR.
Start Sender
- DropToSS in Auto finish. Automatically sends the Base video to the Start Sender device (including Mac).
- Human detection. It uses several detections to calculate when the runner passes the starting line.
- Sound start can be remotely activated also in cloud mode.
- Improved feedback and error-handling in cloud mode.
15.7
2020-10-08
- Added 12 new start sounds, including a "Multibeep" sound useful for staggered starts.
- The start offset time is now available in all start modes and can be set individually for each mode.
15.5
2020-09-06
The "offset time" can now also be used to calibrate "sound at start".
The start sound in self-start can be set to "None", which means that the race starts at the second command (e.g. at a "Go").
The results list is now grouped in race days for a better overview.
Better handling of lane numbers in results, especially for "Lanes only" races.
15.4
2020-08-19
A new "public cloud" option in Start Sender that enables you to connect devices with different Apple-ID:s
15.3
2020-06-10
A number of bug fixes.
See "What's new" in the Guide for more details.
15.2
2020-03-27
- A new set up page in the Photo finish view for setting direction, slice width and time format.
- An AI-based "human detection" in Photo finish.
- Multiple races can be exported as one CSV-file.
- False start sound.
- Improvements to the exposure resulting in less banding in the images.
- The offset time is available also in Start Sender.
15.1
2020-02-23
- The Hand/Mic start has been improved with higher resolution and accuracy.
- The offset time can be used to calibrate the hand start (see the SprintTime blog).
- The sound distance is available also for the hand start.
15.0
2020-01-24
- SprintTimer for Mac OS is now available.
- Base videos can be imported through drag and drop to the main menu and the base video list.
- The sync latency is reported in Start Sender both for direct and cloud mode.
- Better sorting of base videos and start lists.
- Crop marks are visible also in the (normal) portrait view.
14.9
2020-01-09
- Keyboard support, both when starting and during marking. (See "Keyboard shortcuts" in the Guide).
- The sound meter at start reacts faster and more accurately to short sounds.
- Code adaptions to prepare for a Mac OS version.
14.8
2019-12-10
- Start lists and results are now automatically synced between your devices. (iOS 13 only)
- An Import button for base videos instead of the more limited "download from iCloud"
- The base videos are now accessible in the Files app.
- A context menu for setting the time display in the finish view. Press and hold the time label (iOS 13 only)
- A scroll slider in the photo finish view.
Bug fixes
- A bug causing "No recorded video" in Video Finish has been fixed.
- The "Recorded length" in Video finish is more reliable
- Fixed an issue where images uploaded to the SprintTimer viewer became very small.
14.7.1
2019-11-22
Fixed a bug when recording Photo finish.
New in 14.7
- The Results Manager database has been completely re-written. This will form a base for future enhancements.
- The export settings for the results can now be reached also from the Save dialog.
- An option to exclude competitors without results from the export.
- Pasting a start list has been simplified.
- The connection between base videos and results has been improved.
- Already saved base videos will not be resaved, only updated (if needed).
- An improved naming scheme for base videos.
14.7
2019-11-21
- The Results Manager database has been completely re-written. This will form a base for future enhancements.
- The export settings for the results can now be reached also from the Save dialog.
- An option to exclude competitors without results from the export.
- Pasting a start list has been simplified.
- The connection between base videos and results has been improved.
- Already saved base videos will not be resaved, only updated (if needed).
- An improved naming scheme for base videos.
14.6
2019-10-25
The running time will be presented large on a separate display.
A new view for translating the info buttons.
14.5
2019-10-08
- Dark mode support (useful in bright sunlight).
- Create a start-list through copy and paste from a spreadsheet.
14.4
2019-09-28
- iOS 13 adaptions.
- Dark mode partly implemented (more will follow).
- Video recording data in the finish view.
14.3.2
2019-08-28
Fixed a problem when setting up sound on iOS 11.
New in 14.3:
- Measure start reaction with iPhone or Apple Watch.
- A new sound routine for start sounds.
- A 'Stop at lap' setting in Motion finish.
- Motion start can be set to 'always active'.
14.3.1
2019-08-19
Fixed a problem with sound start in Start Sender.
New in 14.3:
- Measure start reaction with iPhone or Apple Watch.
- A new sound routine for start sounds.
- A 'Stop at lap' setting in Motion finish.
- Motion start can be set to 'always active'.
14.3
2019-08-17
- Measure start reaction with iPhone or Apple Watch.
- A new sound routine for start sounds.
- A 'Stop at lap' setting in Motion finish.
- Motion start can be set to 'always active'.
14.2
2019-06-21
- Improvements in the Hand/Sound start.
- An accuracy improvement on some devices.
- SprintTImer Pro subscription fixes.
See "What is new" in the Guide for more info.
14.1
2019-06-12
- Finish images can be posted to the on-line SprintTimer Viewer.
- A better connection between the results and the saved images and videos.
- The results can be exported as html.
14.0
2019-05-07
- A major overhaul of the Apple Watch, including a self start that works over any distance.
- A recovery function for unfinished recordings.
- A SprintTimer Pro package instead of Start Sender and Results Manager.
13.9.2
2019-04-06
- Fixed a problem when importing a ISO-latin encoded start list
- Fixed the formatting of the video view in Start Sender
- Fixed a freeze in the video recording on some devices
13.9.1
2011-04-15
Removed a redundant comma in the LIF-export.
Fixed a potential crash in the guide
13.9
2018-11-07
Set timelines are displayed also on external monitors.
Base videos can be accessed from Results in Start sender.
13.8
2018-10-11
The sound start activation can now be set to "Always on" to make the start more automatic.
13.7
2018-09-26
Photo finish images and Video finish videos can now be shared from 'Results'.
13.6
2018-09-12
Improved results export in Motion finish.
13.5
2018-09-05
You can now set an "Offset time" in the start set up. It can be useful when timing multiple races on the same time, or for very long races.
13.4.1
2018-08-17
Fixed a problem that could cause an empty video in Photo Finish.
v.13.4 contained additional bug fixes.
See "whats new" in the app guide for more info.
13.4
2018-08-15
Several minor improvements and bug fixes.
See 'What is new' in the Guide for more details.
13.3
2018-07-16
Improvements for long races and/or many participants:
- Photo finish can now record 300 s (5 min).
- Large Photo finish images can be scaled.
- Improved background timing.
- Improved handling of long start lists
- Video finish can now display and save 'time of day'
See 'What is new' in the Guide for more details.
13.2.1
2018-06-16
Fixed a problem when opening 'Last race' in Results.
New in v. 13.2
- Choosing between Photo, Video and Motion Finish is now done in the Finish Set up.
- The Results are accessible from the main menu.
- A much more flexible import of start lists.
13.2
2018-06-14
- Choosing between Photo, Video and Motion Finish is now done in the Finish Set up.
- The Results are accessible from the main menu.
- A much more flexible import of start lists.
13.1.1
2018-05-28
Fixed a problem when setting "start recording after" to 0.
New in 13.1
Major improvements in Start Sender. It can now be used also over a cellular network.
13.1
2018-05-26
Major improvements in Start Sender. It can now be used also over a cellular network.
13.0
2018-05-03
- The same save and export functionality in Video Finish as in Photo Finish.
- A start list is automatically created when choosing 'Times only'.
- A new option in the Mark dialog to automatically create an empty start list with lane numbers.
- Auto Finish can be used together with Hand+Mic.
12.9.1
2018-04-13
- Fixed a problem when exporting results on some iPads.
- Fixed a problem with an empty base video list.
New in 12.9
- A more flexible Results export with more options, including DropBox and Google Drive support.
- AirDrop base videos directly into Photo- and Video Finish on another device.
12.9
2018-04-10
- A more flexible Results export with more options, including DropBox and Google Drive support.
- AirDrop base videos directly into Photo- and Video Finish on another device.
- Fixed a problem with 'Self start' in Start Sender.
12.8
2018-04-02
- An Auto Finish setting in Motion Finish.
- Motion detection in Start Sender can be activated remotely.
- Fixed a problem when saving a Photo Finish image.
12.7
2018-03-30
- The interface has been rebuilt to better handle different screens sizes (especially iPhone X).
- The results can be exported as a PDF.
- 'Quick Save' is now executed with a long press on the Save button.
12.6
2018-02-06
- Added a whistle as start sound.
- Fixed a problem when using a saved sound level.
- Fixed the pause/resume button in Start sender.
12.5
2017-12-14
- 3D touch shortcuts to start SprintTimer.
- The exported CSV-file in Results can be configured.
- The sound level setting is saved.
- A problem with deselecting the start button when moving the finger has been fixed.
12.4
2017-11-11
- Higher image quality in Photo Finish on iPhone 8, 8+ and X.
- Some iPhone X adaptions.
12.3
2017-11-02
- A customizable detection zone in Video finish. Pinch and drag to change the shape and position.
- Some bug fixes
12.2
2017-10-14
Better presentation of the marked times in Video Finish, especially when using Dual mode.
Fixed a potential crash when saving without a start list after saving with one.
Fixed a problem with disabled buttons when saving in Video Finish.
12.1
2017-10-10
The Results Manager, that enables you to create, import and manage start lists and results, was added in v. 12.0. The Results Manager has been improved in v. 12.1, together with some improvements in Start Sender.
See 'What is new' in the Guide for more details.
12.0
2017-09-30
The start list and results management has been completely re-written with substantial improvements:
- Create and edit start lists for an unlimited number of races.
- Include name, team, start number (bib) och lane for all competitors.
- Import start lists from spreadsheets and meet manager software (CSV and EVT files).
- Mark Photo- and Video Finishes from the start list.
- Set split and lap times.
- Change already set times.
- Send and copy results.
- Export the results to iCloud as CSV- and LIF-files.
- Print the results directly from SprintTimer.
11.6
2017-06-27
- In the Hand/Mic sound view the time slider is automatically set to the most likely value.
- The sometimes disappearing buttons in the Hand/Mic view have been fixed.
- Some formatting fixes in the sent results.