T&D Thermo

Added a confirmation dialog to confirm the lifting of warning state when changing the warning settings or starting a new recording session for a TR7A series device which is in a warning state.
Added the "Warning Lifted" status to the Warnings list for the TR7A series device.
Changed the threshold value at which a "Low Battery" warning appears in the app to the same level at which the warning is sent from the logger to the server.
Added the adjustment function for measurements of the US/EU model TR4A and TR4 series.
Fixed an issue where some text was shown in bold font on iOS 17 devices.

Added support for the TR32B.
Removed WEP from the Security options in TR7A's Network Settings.
Improved graphing functionality.
Updated the firmware update program for the TR41A/42A/43A.
(Fixed a problem where the device would freeze during the firmware update.)

Fixed a problem where the pending setting value was not displayed.
Changed the messages displayed when the device is not registered to the selected WebStorage account or if a WebStorage account has not been set up in the app.

Fixed a problem where the home screen and the device info screen showed an incorrect humidity reading for the TR43A. This occurred when the device was set to Fahrenheit in the temperature unit setting and when the data was retrieved from the cloud (T&D WebStorage Service).
Fixed a problem that occurred when collecting and sending the TR4A Series logger’s data to T&D WebStorage Service, where the app sent only a subset of data if the amount of data to be sent was greater than 16284.

Added support for RT/RS15.
Updated the firmware update program for the TR41A, TR42A and TR43A. (Device Firmware Ver.1.09 /Bluetooth Ver.1.02)
This update resolves the following issues:
- The [BAT] indicator did not disappear from the LCD screen even after replacing with a new battery.
- Low battery was not detected from the app
Fixed typo in the tag name used in the recorded data file (.trz): "auther" to "author"

・Updated the firmware update program for the TR41, TR42 and TR45.(Device Firmware Ver.1.09 / Bluetooth Ver.1.02)
This update resolves the following issues:
- A problem that could cause the device to freeze when internal communication between components failed.
- A problem where the battery warning mark may be turned on or off incorrectly.
・The app is now compatible with iOS 16. iOS 13 and below are no longer supported.

Changed the format of the output Log and Settings file, including the addition of system information.
The Settings Table now displays “Adjustment” only when the device has previously been configured with Adjustment settings.
Removed the Latest button (sort by update time) from the List Display on the home screen.
Improved the Graph display in portrait mode:
- by changing the initial position of the horizontal cursor to the center of the Y-axis.
- by showing a vertical cursor and the date, time, and readings for the cursor position by default (without a long press on the graph).

Updated the app design.
Added support for the TR4A and TR4 Series.
Added the following items to the Settings Table:
- Recording Status
- BT Version
Fixed a problem where the “Wrong Passcode” message was not displayed when entering a wrong passcode in Other Settings > Bluetooth Lock for the TR7A.
Fixed a problem where the group name could not be set to blank in Name Settings for the TR-7wb/nw/wf.
Fixed a problem that occurred when opening the TR-7wb/nw/wf data via the cloud (T&D WebStorage Service), where the graph time was not displayed correctly in daylight savings time.

Added support for the TR75A.
It is now possible to identify the type of sensor in the output log/setting information.
When the app collects the TR7A device’s recorded data and cannot obtain date and time information, the date on the graph’s X-axis now appears as “Jan 1, 2001”.
Fixed a problem that occurred when registering a device, where the “Nearby Bluetooth Devices” search result appeared flashing.
Added a Done button to the keyboard that appears when entering the passcode for “Bluetooth Lock” in Other Settings.
Fixed a problem that occurred when opening “Warnings” to check warning histories, where the warning setting values were not updated correctly.
Fixed a problem that occurred when opening the Settings Table via T&D WebStorage Service, where the firmware version was displayed in a small size.
Fixed a problem that occurred when generating a PDF report, where the upper and lower limit lines were displayed outside the graph area.
The app is now compatible with iOS 15. iOS 12 and below are no longer supported.

- Added a function to create a PDF report of the data which was downloaded using Bluetooth or WLAN Direct Communication.
- Added a function to receive and display push notifications when a warning occurs.
- Added a function to output log and settings from the Settings Table screen.
- Added a function to immediately communicate with T&D WebStorage Service by swiping down at the Top screen.
- Changed the default value for the Graph Display Count from 8000 to 16000.
- Removed the “5hr” option from the Auto-upload Interval setting.
- Fixed a problem that occurred when going to [Files] menu - [Share] icon - [Save to Files] on iOS 14 device, where the dialog buttons were not visible.
- Changed the default date time axis label to center at 0:00 when displaying a graph of the long-term recorded data. (Previous label was 15:00)

Changed the threshold value at which a battery warning is issued and the background color of the device in the device list turns red.

The app is now compatible with iOS 14. iOS 10 and below are no longer supported.

- Fixed a problem that occurred when using Bluetooth and T&D WebStorage Service with the TR-7wb series, where measurements and the elapsed time were not displayed correctly on the Home screen.

- Fixed a problem that caused WLAN Direct Communication to fail on iOS/iPadOS 13.
- In the device list display, the readings received via T&D WebStorage Service are now automatically refreshed.

- Only the registered devices are now displayed in a list.
(See below for details.)
https://www.tandd.com/news/release/20190628001_tdthermo.html
- Added a function to make the low battery warning setting for the TR-7nw.
- Added a function to scale the graph vertically.
- Other small fixes and improvements.

Updated graph functions.

- Fixed a problem that occurred when deleting a device from the device list with a Read-Only ID, where the data for that device was deleted from not only this app but also from T&D WebStorage Service.

- Fixed a problem that caused the network communication to fail by turning on “Wireless LAN” in the Network Settings. - Other small fixes and improvements.