CROSSFIRE
Device configuration utility
免費
3.5.1for iPhone, iPad and more
Age Rating
CROSSFIRE 螢幕截圖
About CROSSFIRE
Easily detect, configure, and control your CROSSFIRE devices from your iPhone or iPad.
* User-friendly design makes setting up and controlling your devices easy for field personnel
* Read detailed status and diagnostic information from CROSSFIRE devices
* Access and configure advanced features of the CROSSFIRE controller in a straightforward manner
NOTE: You must be within Bluetooth range of your CROSSFIRE devices.
* User-friendly design makes setting up and controlling your devices easy for field personnel
* Read detailed status and diagnostic information from CROSSFIRE devices
* Access and configure advanced features of the CROSSFIRE controller in a straightforward manner
NOTE: You must be within Bluetooth range of your CROSSFIRE devices.
Show More
最新版本3.5.1更新日誌
Last updated on 2024年05月06日
歷史版本
Bug Fixes and Minor Enhancements
Improvements to Compressor Curves
• Resolved calculation error when scaling deadband between user entered PSI value and used RPM value in firmware.
• Resolved an issue where the minimum RPM value would change after saving compressor curve settings.
• Reversed order of data entry in the interface to entering deadband width first, then minimum speed. The range of acceptable values for minimum speed are dependent on deadband width and therefore, deadband must be entered first to prevent minimum speed changing from user defined value.
• Resolved issue where incorrect compressor pressure curve was displayed in some scenarios
Improvements to Compressor Curves
• Resolved calculation error when scaling deadband between user entered PSI value and used RPM value in firmware.
• Resolved an issue where the minimum RPM value would change after saving compressor curve settings.
• Reversed order of data entry in the interface to entering deadband width first, then minimum speed. The range of acceptable values for minimum speed are dependent on deadband width and therefore, deadband must be entered first to prevent minimum speed changing from user defined value.
• Resolved issue where incorrect compressor pressure curve was displayed in some scenarios
Show More
Version History
3.5.1
2024年05月06日
Bug Fixes and Minor Enhancements
Improvements to Compressor Curves
• Resolved calculation error when scaling deadband between user entered PSI value and used RPM value in firmware.
• Resolved an issue where the minimum RPM value would change after saving compressor curve settings.
• Reversed order of data entry in the interface to entering deadband width first, then minimum speed. The range of acceptable values for minimum speed are dependent on deadband width and therefore, deadband must be entered first to prevent minimum speed changing from user defined value.
• Resolved issue where incorrect compressor pressure curve was displayed in some scenarios
Improvements to Compressor Curves
• Resolved calculation error when scaling deadband between user entered PSI value and used RPM value in firmware.
• Resolved an issue where the minimum RPM value would change after saving compressor curve settings.
• Reversed order of data entry in the interface to entering deadband width first, then minimum speed. The range of acceptable values for minimum speed are dependent on deadband width and therefore, deadband must be entered first to prevent minimum speed changing from user defined value.
• Resolved issue where incorrect compressor pressure curve was displayed in some scenarios
3.5.0
2024年01月20日
Version 3.5.0 is a major update that adds support for connecting to CROSSFIRE devices with the latest firmware versions. It is important to install this update to ensure correct operation when connecting to devices with the latest firmware. This update also includes many enhancements and fixes for when connected to devices running older firmware.
Improvements for Colour Blind Users:
Users with colour blindness had reported difficulties reading some error and warning messages displayed in the app. Updates have been made to correct this.
• The colour of error messages has been changed to make them visible to colour blind users
• Contrast increased for both error and warning messages, improving their visibility for all users
Enhanced Data Display for Motor Control:
• When connected to a device configured as a compressor, the app will now display the measured system pressure alongside the system speed
Major Changes to Compressor Setup:
Device firmware V38R08 has brought major changes to how compressors are set up, and the app has updated to reflect this.
• The proportional guard band has been replaced with a proportional dead band to be more in line with user’s expectations of primary function as a relation to PSI rather than RPM based band.
• For users connected to devices running older firmware, the guard band settings have been move from "Automation" to "System Setup"
• Drain valve control settings have been moved from the auxiliary controls section of "Automation" to "System Setup"
• Changes have been made to default compressor curves, and to allowed ranges of values for custom compressor curves. Due to variations in the output of some pressure transmitters and in the resistances of wiring setups, some devices were not seeing a full 5V signal at full pressure. According, the maximum stop pressure for curves allowed by the app is now 49PSI for 50PSI transmitters, and 98PSI for 100PSI transmitters.
Vibration Detection:
Recent device firmware updates have added a new vibration detection feature to improve system stability. Support for this has been added to the app.
• On devices that support it, the app will automatically turn on vibration detection while making any changes to device configuration
• Display of whether vibration detection is enabled or not has been added to "System Setup"
Enhanced Troubleshooting Features:
Improvements have been made to the diagnostic and troubleshooting information displayed in the "System Status" section.
• Device firmware revision number is now displayed alongside firmware version number
• The System Diagnostics section now supports display of more status codes, and includes detailed text descriptions for certain statuses
• The Fault Record section is now always visible, and includes reporting of more possible fault codes. Detailed descriptions for all fault states have been added.
Features for Power Users:
Improvements have been made for users who interact with their device through the "Terminal" view.
• The reference documentation has been updated to include features introduced by the latest device firmware
• Users can swap between the two firmware versions installed on their device with a terminal command
Minor Enhancements and Bugfixes:
• Minor changes to the layout of some sections, to provide better information flow for phone users
• Changes to the rate at which some values are updated in the app, to improve UI responsiveness
• Minimize the number of commands that get re-sent to the device after a system reboot is detected
• Fix a reboot loop that could occur sometimes when applying a configuration template
• Fix a file permissions issue on iOS17 that prevented some configuration templates from being loaded
• Miscellaneous small bugfixes
Thanks to all our users for using our app to configure your CROSSFIRE devices. To make a bug report, feature suggestion, or to provide other feedback on your app experience, please drop us an email at info@lcotechnologies.com
Improvements for Colour Blind Users:
Users with colour blindness had reported difficulties reading some error and warning messages displayed in the app. Updates have been made to correct this.
• The colour of error messages has been changed to make them visible to colour blind users
• Contrast increased for both error and warning messages, improving their visibility for all users
Enhanced Data Display for Motor Control:
• When connected to a device configured as a compressor, the app will now display the measured system pressure alongside the system speed
Major Changes to Compressor Setup:
Device firmware V38R08 has brought major changes to how compressors are set up, and the app has updated to reflect this.
• The proportional guard band has been replaced with a proportional dead band to be more in line with user’s expectations of primary function as a relation to PSI rather than RPM based band.
• For users connected to devices running older firmware, the guard band settings have been move from "Automation" to "System Setup"
• Drain valve control settings have been moved from the auxiliary controls section of "Automation" to "System Setup"
• Changes have been made to default compressor curves, and to allowed ranges of values for custom compressor curves. Due to variations in the output of some pressure transmitters and in the resistances of wiring setups, some devices were not seeing a full 5V signal at full pressure. According, the maximum stop pressure for curves allowed by the app is now 49PSI for 50PSI transmitters, and 98PSI for 100PSI transmitters.
Vibration Detection:
Recent device firmware updates have added a new vibration detection feature to improve system stability. Support for this has been added to the app.
• On devices that support it, the app will automatically turn on vibration detection while making any changes to device configuration
• Display of whether vibration detection is enabled or not has been added to "System Setup"
Enhanced Troubleshooting Features:
Improvements have been made to the diagnostic and troubleshooting information displayed in the "System Status" section.
• Device firmware revision number is now displayed alongside firmware version number
• The System Diagnostics section now supports display of more status codes, and includes detailed text descriptions for certain statuses
• The Fault Record section is now always visible, and includes reporting of more possible fault codes. Detailed descriptions for all fault states have been added.
Features for Power Users:
Improvements have been made for users who interact with their device through the "Terminal" view.
• The reference documentation has been updated to include features introduced by the latest device firmware
• Users can swap between the two firmware versions installed on their device with a terminal command
Minor Enhancements and Bugfixes:
• Minor changes to the layout of some sections, to provide better information flow for phone users
• Changes to the rate at which some values are updated in the app, to improve UI responsiveness
• Minimize the number of commands that get re-sent to the device after a system reboot is detected
• Fix a reboot loop that could occur sometimes when applying a configuration template
• Fix a file permissions issue on iOS17 that prevented some configuration templates from being loaded
• Miscellaneous small bugfixes
Thanks to all our users for using our app to configure your CROSSFIRE devices. To make a bug report, feature suggestion, or to provide other feedback on your app experience, please drop us an email at info@lcotechnologies.com
3.4.1
2023年11月07日
Fixes an issue that was causing Bluetooth connection problems for some users on iOS17.
3.4.0
2023年10月12日
- Better report generation
- Minor bug fixes and enhancements
- Minor bug fixes and enhancements
3.3.13
2023年09月20日
Minor enhancements and bug fixes.
3.3.12
2023年08月18日
Minor enhancements and bug fixes.
3.3.10
2023年07月18日
Minor enhancements and bug fixes.
3.3.9
2023年05月01日
Minor enhancements and bug fixes.
3.3.8
2023年03月30日
Minor bug fixes and enhancements.
3.3.7
2023年03月21日
Minor bug fixes and enhancements.
3.3.6
2023年03月06日
Minor enhancements and bug fixes
3.3.3
2023年01月28日
- Minor bug fixes and enhancements
- Improve Bluetooth connection stability
- Improve Bluetooth connection stability
3.3.1
2022年12月01日
Minor bug fixes.
3.3.0
2022年11月15日
Minor bug fixes and enhancements.
3.2.4
2022年10月28日
Minor bug fixes and enhancements.
3.2.3
2022年10月12日
Minor bug fixes and enhancements.
3.2.2
2022年09月29日
- Minor bug fixes
3.2.1
2022年09月09日
Minor bug fixes and enhancements.
3.2.0
2022年07月27日
Minor enhancements and bug fixes.
3.1.0
2022年06月20日
* Add support for configuring vapour recovery units
* Bug fixes and enhancements
* Bug fixes and enhancements
3.0.0
2022年03月09日
Bug fixes and enhancements.
2.1.12
2022年02月25日
Minor bug fixes and enhancements.
2.1.8
2021年11月18日
Minor enhancements and bug fixes.
2.1.7
2021年05月26日
Various improvements and bug fixes.
2.1.6
2021年05月14日
Minor bugfixes and enhancements.
CROSSFIRE FAQ
點擊此處瞭解如何在受限國家或地區下載CROSSFIRE。
以下為CROSSFIRE的最低配置要求。
iPhone
須使用 iOS 15.0 或以上版本。
iPad
須使用 iPadOS 15.0 或以上版本。
iPod touch
須使用 iOS 15.0 或以上版本。
CROSSFIRE支持英文
